Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.8 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹33.0 L+₹1.3 L (4.01%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹33.9 L+₹2.1 L (6.72%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹34.0 L+₹2.2 L (7.00%)Rejected-Finance | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹38.8 L+₹7.0 L (22.1%)Rejected-Finance 33 MAHAVEER NAGAR NANDRI ROAD PO SARAN NAGAR JODHPUR 342015 | JODHPUR | JODHPUR | RAJASTHAN | 342015 | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
5 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, Banar
Garrison Engineer, Banar, Jodhpur-342027
REPAIRS TO ROLLING SHUTTER, SLIDING DOOR, WOODEN DOOR, Z VENTILATION AND CERTAIN JOINERY WORK INSIDE DEPOT AREA AT ARMY AREA BANAR, JODHPUR
2023_MES_601324_1
8823/04/E8
Open Tender
Civil Works
Item Rate
270 days
Banar
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer, Banar
₹80,000
Yes
10 Oct 2023
6 Jun 2023
7 Jul 2023
6 Jun 2023
5 Jul 2023
21 Jun 2023
Amount
Repair to sliding door and making u/s door free functioning of size n exc 10 sqm made of MS Plate manual/gear operative type, denting of various parts, cleaning of guide rails, laths by kerosene and proper greasing , oiling to make the system smooth/easy functional , including supply and fix new nuts & bolts of existing size by removing old/rusted nuts and bolts , necessary welding wherever required, as directed. Note : If Hydra is required for repair the door, will be paid seperately under item No 35.
All as per item No 1.00 but area exc 10 Sqm but n exc 20 Sqm
All as per item No 1.00 but area exc 20 Sqm but n exc 25 Sqm
All as per item No 1.00 but area exc 25 Sqm but n exc 30 Sqm
Refixing of wheels 200mm size with ball bearing fixed at bottom of sliding doors to move/slide on rails after oiling, greacing and cleaning the bearing and fixed in correct position by making in alignment complete all as specified.
Supply and fixing in repair wheel of sliding door as fixed in existing sliding door of any dia & specification, complete all as specified.
Supply and fixing in repair ball bearing of sliding doors of 90/100mm size and description complete all as specified
Repair to rolling shutters and making u/s door free functioning of size n. exc 5 Sqm each, manual/gear operative type , denting of various parts, cleaning of guide rails, laths, top cover by kerosene and proper greasing , oiling to make the system smooth/easy functional , including new nuts & bolts and greasing of gear box if required of existing size by removing old/rusted nuts and bolts , necessary welding & taking down wherever required, as directed, giving proper tension to the spring all as specified. Note : If Hydra is required for repair the door, will be paid seperately under item No 35.
All as per item No 8.00 but area exc 05 Sqm but n exc 10 Sqm
All as per item No 8.00 but area exc 10 Sqm but n exc 20 Sqm
All as per item No 8.00 but area exc 20 Sqm but n exc 30 Sqm
All as per item No 8.00 but area exc 30 Sqm but n exc 40 Sqm
Repair to MS door and making u/s door free functioning of size n exc 10 sqm making necessary repair or necessary welding, drilling wherever required with new or old hinges if required, hold fasts,pivot, making the surface good all as specified. Note : If Hydra is required for repair the door, will be paid seperately under item No 35.
All as per item No 13.00 but area exc 10 Sqm but n exc 15 Sqm
All as per item No 13.00 but area exc 15 Sqm but n exc 25 Sqm
All as per item No 13.00 but area exc 25 Sqm but n exc 30 Sqm
Supply and fixing in repair gear box of standard size for rolling shutter with complete fitting/various parts of gear box, spring etc including painting all as specified.
Supply and fixing in repair ball bearing of rolling of 90/100mm size and description complete all as specified.
Supply and fixing in repair spring hinge of rolling shutter of Gde-0 600mm long all as specified.
Supply and fixing in repair spring hinge of rolling shutter of Gde-0 450mm long all as specified.
Supply and fixing in repair 600mm Mild steel sliding door bolts made of 16mm dia round bar with MS hasp & staple complete all as specified.
Supply and fixing in repair Safety lever locks of mild steel with 4 leavers for rolling shutters all as specified.
Supply and fixing in repair of MS pipe of existing dia (50/40 mm) to operate gear box complete including new hold fasts/ brackets for fixing in shaft all as specified.
Supply and fixing in repair cover hood of made out of 1mm thick MS sheet including 02 coat of synthetic enamel paint over a coat of Red oxide primer matching to existing finish all as specified.
Supply and fixing in repair MS bracket plate to the side of cover hood made of 6mm to 8mm dia MS plate all as specified.
S & F in repair framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks,locking arrangement for doors and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified.
Supply and fixing in repair Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets complete all as specified.
S&F in repair steel rolling shutters 1mm thick sheet lath, with out ball bearing, as specified including top cover, an?choring rod, hasp and staple and one shop coat of primer; erected in position as indi?cated, complete: push pull or manual type gear operated type with bevel gear box and crank handle complete all as specified.
S&F in repair wicket door including a 4 lever mild steel safety lock, lockable from both inside and outside including cutting and necessary welding in existing rolling shutter/sliding door etc complete all as specified.
Supply only safety lever locks mild steel with 4 levers for rolling shutters complete all as specified.
Supply only Ball bearing for rolling shutters complete all as specified.
Repair to Steel gate and making u/s door free functioning of size exc 5 sqm but area n exc 10 sqm making necessary repair or necessary welding, drilling wherever required with new or old hinges if required, hold fasts,pivot, making the surface good including one coat synthetic enamel paint on all surface complete all as specified. Note : If Hydra is required for repair the door, will be paid seperately under item No 35.00
All as per item No 32 but area exc 10 Sqm but n exc 15 Sqm
All as per item No 32 but area exc 15 Sqm but n exc 25 Sqm
Hiring HYDRA to realgin & lift the heavy MS Door or sliding Door during repair work complete all as specified. Note : (i) Actual woring time of HYDRA at site shall be measured for payment only. (ii) HYDRA shall be deployed only for heavy MS Door/Sliding Door as directed by Engr-in-charge.
S&F in repair rolling shutter side motor (copper wiring) of single phase of power 370W,220 V,Frequency- 50Hz,Speed-4.8r/mi,lifting capacity of 600 Kg with remote of as per sample complete all as specified
S&F in repair garari of rolling shutter of suitable size as per ground requirement (height of rolling shutter up to 7.0 mtr) complete all as specified.
S&F in repair curtains/Laths of 1mm thick of rolling shutter of suitable size as per ground requirement (height of rolling shutter up to 7.0 mtr) complete all as specified.
Taking down chowkats or frames with shutters without taking off shutters n.exc 1.50 sqm each for window/ ventilator and remove from site complete all as specified.
Taking down chowkats or frames with shutters without taking off shutters exc 1.50 sqm but n.exc 4.00 sqm each and removing from site complete all as specified.
Taking down door shutters and repairs before refixing as same opening exc 1.0 sqm but n exc 2.00 sqm each all as specified.
Taking down door shutters exc 1.0 sqm but n exc 2.00 sqm each all as specified.
Supply and fixing rolled mild steel of grade Fe-290 (Grade E-165) in rolled section as in frames for doors frame(Chowkhats) of angle or other sections with gusset plates, rails, braces etc complete, drilled for covering. Doors, etc to be prepared for hanging or sliding with and either hooks or hinges or steel hanging door fittings complete all as specified.
Material and labour for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in hold fast iron fixing including necessary form work complete all as specified.
Supply and fixing of SS butt hinges 100 mm size medium weight, cold rolled mild steel complete all as specified.
S&F 100mm size single action door spring hinges mild steel with steel wire spring stove enamelled black complete all as specified.
Supply and fixing Factory made solid PVC moulded door ( Teak wood Finish) shutter 28 to 30mm thick (stiles) with 2,4,or 6 raised panel design with 2mm thick moulded Prelam PVC sheet on front face & 2mm plain colour PVC sheet on back complete all as specified.
S&F solid PVC door frame of size 50 x 47mm (teak wood finish) made out of 5mm wood finish colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed.
Supply and fixing 35 mm thick factory made, second class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 09 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part - I), kiln seasoned and chemically pressure treated complete all as specified.
Supply and fixing 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats (Four pannels) and design all as specified.
Material and labour for two coats of synthetic enamel paint over a coat of pink primer including prepration of newly wooden surfaces of girth exc 10cm complete all as specified.
Material and labour for one coat of synthetic enamel paint including prepration of old painted wooden surfaces of girth exc 10cm complete all as specified.
Supply and fixing in repairs stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden beads supplied with shutters complete all as specified.
Supply and fixing stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden beads supplied with shutters complete all as specified.
Material and labour for running welding in repairs, thickness of metal to be welded not exceeding 6 mm complete all as specified.
Supply and fixing Aluminium tower bolts of extruded section of size 150mm complete all as specified.
Supply and fixing extruded aluminium alloy handles, fabricated type, anodized of size 150 mm complete all as specified.
S&F 150mm long mild steel barrel tower bolts stove enamelled black with bright bolt complete all as specified.
S&F in repair 150mm long mild steel barrel tower bolts stove enamelled black with bright bolt complete all as specified.
S&F 150mm long mild steel pressed handle, oval type, stove eanmelled black complete all as specified.
S&F in repair 150mm long mild steel pressed handle, oval type, stove eanmelled black complete all as specified.
S&F 300mm long mild steel sliding door bolts plate type, stove enameled black with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified.
S&F in repair 300mm long mild steel sliding door bolts plate type, stove enameled black with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified.
Supply and fixing factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars complete all as specified.
Supply and fixing factory made steel ventilator with top hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars complete all as specified.
All as per item Ser No 65.00 above but as in ventilator top hanging shutter without glazing bar complete all as specified.
Supply and fixing Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified.
Material and labour for two coat of synthetic enamel paint over a coat of red oxide primer on steel surface including preparation of surface over 10cm width or girth complete all as specified.
Material and labour for one coat of synthetic enamel paint including prepration of old treated steel surfaces of girth exc 10cm complete all as specified.
Hacking out old broken glass (any thikness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing fixing new ones complete all as specified.
Supply and fixing of 3mm thick figured pin headed sheet glass panes of size not. exceeding 0.50 Sqm fixed with oil putty complete all as specified.
Supply and fixing for 4 mm thick plain glass ordinary quality & glazing complete all as specified.
Supply and fixing in repair window handles (L & R) are provided in mild steel handles complete all as specified.
Supply and fixing in repair Peg stay 300 mm long for window /ventilator provided in mild steel complete all as specified.
Taking down cement plaster on brick or stone walls or concrete surfaces, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.
Material and labour for rendering 15 mm thick in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified.
Material and labour for 10mm thick rendering in CM 1:3 on concrete surface as in ceiling and finishing the surface even and smooth without using extra cement complete all as specified.
M&L for two coats of cement base paint on new plastered surfaces of walls including necessary preparation of surfaces all as specified.
M&L for two coats of cement base paint on old stone/plastered surfaces of walls including necessary preparation of surfaces all as specified.
M&L for two coats of oil emulsion distemper on newly plastered walls over a coat of 1mm thick JK/Birla wall putty including preparation of surfaces all as specified.
Material and labour for preparation of on old ceiling surface including pillars etc (plastered or unplastered) by scrapping down smoke spot moulds, moss and efflorescenet salt and treatin oil and greasy spots and applying two coat of white wash with moonj brush only complete all as specified.
S&F in repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S&F in repair Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
S&F in repair Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.
Dismantling plain or corrugated steel sheeting, any gauge thickness including Nainital or similar pattern roof covering complete all as specified.
S & F Pre painted galvalume aluminium zinc coating GI Based semi corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws as specified.
S & F Pre painted galvalume aluminium zinc coating GI Based plain steel sheet of 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws as specified.
M&L 6mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc. fixed with L or J type or cranked hook bolts complete all as specified.
S&F 0.80 plain galvanised mild steel sheeting, on wall clading and ridges, valley gutters,drips and straight flashing complete all as specified.
Dismantiling wrought iron or mild steel work including of any description not otherwise provided for complete all as specified.
S&F Rolled section as in main and cross beams, hips and Jack rafters, purlins where connected to common rafters and running rails and guides for sliding door, fixed with angle cleats or other connecting plates confirming to Fe-410-W Gde E-250 quality A complete all as specified.
S & f steel work in tubular trusses/post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1998 grade St-240 complete all as specified.
S & f Fe 410 W (Gde-250) roof trusses(framed) trussed, purlins crane gantries, rails and fastenings and heavy bracket framing (beams,tee angle,channel or flat sections) including distance pieces,cleats etc, complete all as specified.
M/S PIYUSH CONSTRUCTION COMPANY
Bhawani Enterprises
NISHA CONSTRUCTIONS
DIWAKAR CONSTRUCTION CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .