SPL REPAIR TO OFFICE COMPLEX (BLDG NO.T-2) OF HQ UKSA UNDER GE DEHRADUN

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonebwork and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including all quoins, arches, pillars i complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick rendering on celing surface in cement mortar 1:3 surface finished even and smooth including fixing of wire mesh wherever required complete all as specified and directed.

M&L for preparation of newly plastered surface of walls including corners and applying two coats of distemper oil emulsion over and including 1-2 mm thick layer of wall care putty finish wall surface even & smooth complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying two coats of distemper oil emulsion on ceiling, off sets, pillar etc. over and including 1-2 mm thick layer of wall care putty finish wall surface even & smooth complete all as directed and specified.

M&L for providing and injecting chemical emulsion for post constructional anti termite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sqm of the vertical surface of the sub structure to a depth of 300 mm including excavating channel along the wall and rodding complete all as specified and directed.

M&L forr vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished area of each tiles exceeding 0.42 sqm but n.exc 1.00 sqm, in floors etc. laid over and including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile including dismantling of existing tiling complete all as specified and directed.

All as per item No. 11 here in above but as in skirting fixed over and including 10 mm thick rendering in cement mortar 1:4 complete all as directed and specified.

M&L for non skid/mat finish ceramic coloured tiles of size 400 mm x 400mm and 7 to 8 mm thick,in floors etc. laid over and including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile including dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic colour tiles size 300 mm x 450 mm/ 300 mm x 600mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match fixed over and including 10mm thick rendering in cement mortar 1:4 and dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed and specified.

Dismantling of stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for 16-18 mm thick Granite, of any type, table rubbed and polished in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding complete all as specified and directed.

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames exc 1.50 sqm but n.exc 4.00 Sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F factory made 100% solid wood plastic composite (WPC) door frame 100x65mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed.

S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and directed by Engr-in-Charge.

S&F powder coated aluminium standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos stainless steel wire gauged shutter sliding type, 3 track numbers for sliding windows, and glazed with glass 4mm thick, fixed with & including glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum including locking system and provision of space for AC etc complete all as specified and directed. Size of track- both top & bottom (verticle sides) : 100 x 44 x 1 mm Size of shutter frame: 25 x 12 x 1 mm Note: Iron grill with frame to be fixed with window (measured and paid separately)

S&F powder coated Aluminium partition (Fixed) made out of aluminium powder coated section 44 x 44 x 1 mm including 4 mm thick glass/ACP Sheet complete with rubber packing/aluminum beading etc, complete all as specified and directed. Note: Iron grill with frame to be fixed with window (measured and paid separately)

S&F 12 mm thick toughned glass with openable door with itching of approved design including all fittings such as bottom patch 163x50x31mm, Top patch, over panel patch, Big -L , Glass door centre type lock, four side connector, Small-L, three side connector, wall fix bracket, glass to glass 180 degree connector, glass to glass 90 degree connector, pivot for Floor door closer, Pivot for top, wall to glass 90 degree connector, wall mounted over panel patch with pivot, "H" type handle 450 mm long complete all as specified and directed. Note: All fittings should be stainless steel 304 grade and as approved.

S&F anodised aluminum powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having two Disc or D type handle, two aluminum tower bolt 200 mm size, one brass mortice lock of 6 lever with key and one hydraulic door closure, shutter to be partly glazed with 4mm thick tinted coloured glass in upper panel and partly pannelled with 12mm thick both side pre-laminated particle board in lower panel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed. Chowkhat Frame:- 100 x 44 x 1mm Shutter Vertical style:- 100 x 44 x 1mm Shutter Middle Rail:- 100 x 44 x 1 mm Shutter Top Rail and bottom Rail:- 150 x 44 x 1mm

S&F hollow PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing including dismantling of old boarding complete all as specified and directed.

S&F in repair 18 mm thick PVC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed.

S&F in repair 6 mm thick PVC board both side plain white colour as in cub board selves etc fixed with screws, salvent cement/ adhessive , complete all as per specifications & directed.

S&F stainless steel butt hinges medium weight, 100 mm fixed to steel/wooden shutters complete all as specified and directed.

S&F stainless steel barrel tower bolts 150 mm size, fixed with stainless steel screws complete all as specified and directed.

S&F 150 mm size solid in one piece stainless steel handles fixed with stainless steel screws complete all as specified and directed.

S & F Continuous (Piano) hinges, stainless steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and directed.

S&F magnet catcher for cub board with brass body and striking plate including letting and fixed complete all as specified and directed.

S&F in repair 25 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative finished at both ends as per approved sample complete all as specified and directed.

M&L for providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grams, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width including dismantling of old boarding complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing including taking up or down old tubing complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20mm bore GI tubing including taking up or down old tubing complete all as specified and directed.

S&F in repair vitreous china rimless single piece WC of size 385x720x710 mm with UF sift close slim seat cover, hinges, fixing accessories and dual flushing cistern complete all as specified and directed.

S&F in repair vitreous china wash hand basin with pedestal including brackets, white size 550 x 400 mm including cutting for and pinning in ends of brackets, including Waste fittings, brass chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed.

S&F in repair Vitreous China counter top wash hand basin (of required size to fit on slab) of approved colour and dseign including waste coupling complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type, white (size as directed by Engr-in-charge) complete all as specified and directed.

S&F in repair CP urinal spreader for fixing with the inlet connection complete all as specified and directed.

S&F in repair curved shape urinal partition with 8mm thick frosted glass of size 450x900mm complete all as specified and directed.

S&F in repair wall mixer/L bend mixer 15 mm dia, brass chromium plated complete all as specified and directed.

S&F in repairs centre hole basin mixer 15 mm dia, brass chromium plated complete all as specified.

S&F in repair CP brass bib tap 15mm bore screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair CP stop/angle cock fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts, of 450 mm long complete all as specified and directed.

S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed.

S&F in repair soap dish 6 inches, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S & F in repair health faucet mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair 32mm bore heavy duty waste pipe not less than 60cm long with PVC coupler for kitchen sink, WHB, urinal, etc complete all as specified and directed.

S& F in repair glass corner shelf suitable size made of 5 mm thick toughened glass with CP railing complete all as specified and directed.

S&F in repair front glass shelf assembly consisting of 5.5 mm thick toughened glass with CP railing and brass brackets of size 500x125 mm complete all as specified and directed.

Taking down CI/AC/PVC pipes incl fittings upto 110mm dia and removing from site complete all as specified and directed.

S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls or laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes of 75 mm dia, single socketed fixed to walls or laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed.

S&F PVC (SWR) bends of 75 mm dia, any radius complete all as specified and directed.

S&F PVC nahani trap of 75mm bore, with grating including jointing to waste pipe with solvent fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M&L for coloured pre-polished rubber moulded chequred cement concrete tile of size 300mm x 300mm x 20-22mm thick with anti skid properties set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D-2, using 40mm graded crushed stone aggregate as in sub base of flooring complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

S&F rotational moulded polyethylene 1000 Ltrs capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia including dismantling of old tank complete all as specified and directed.

S&F in repairs Gun metal gate valve iron wheel head screwed both ends for iron pipe of 20 mm bore complete all as specified and directed.

Dismantling of timber scantlings 40sq cm and over in section, in unframed work and in any position complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe-410-W (Gde E-250) quality-A complete all as specified and directed.

S&F framed work such as grills, gratings, etc. or hand rails with ends of bars (angle, hollow section) shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F in repair for 3 mm thick ACP (Aluminium composite panel) sheet fixed with screw on existing mild steel frame as in view cutters etc. complete all as specified and directed. Note:- Mild steel frame work shall be measured and paid seperately.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Taking down carefully copper aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose, lamp holder and regulator, light fitting etc and removing from site and making good to any disturbed surfaces of walls floors etc complete all as specified and directed.

M&L for Point wiring for One light point/ Fan point/bell point controlled by one, one way switch with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core(with socket, elbow, junction box, bell mouth, bend, reduce) FRLSH cable drawn through and including non metallic medium duty rigid PVC concealed conduit as per existing or as directed at site in 20mm dia or higher size complete including factory made MS pressed modular metal flush boxes with zinc coated duly concealed in wall of thickness 1.2 mm for mounting of modular switches, sockets, fan regulators etc including logic modular white frame with cover plates of suitable size/module as required at site and 1.5 sqmm (nominal area) single core FRLSH , PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sunken boxes as directed by Engr -in -Charge.

All as per item No.76 above but for one pin 5 A socket outlet independent point

All as per item No.76 above but for one pin 5 A socket outlet on same board

All as per item No.76 above but with 4 Sqmm cable for one 6 pin 15A socket outlet point on independent board

M&L for point wiring One light point/ Fan point/bell point controlled by one, one way switch with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core drawing through existing conduit or as directed at site in 20mm dia or higher size complete including factory made MS pressed modular metal flush boxes with zinc coated duly concealed in wall of thickness 1.2 mm for mounting of modular switches, sockets, fan regulators etc including logic modular white frame with cover plates of suitable size/module as required at site and 1.5 sqmm (nominal area) single core FRLSH , PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sunken boxes as directed by Engr -in -Charge.

All as per item No.80 above but point wiring for one 5 pin 5 Amp socket outlet point on same board

All as per item No.80 above but for one 5 pin 5 Amp socket outlet point on independent board as directed.

All as per item No.80 here in before but with 4 Sqmm copper conductor cables (multistranded) PVC insulated FRLS, unsheated cable and including 4 Sqmm copper conductor cable (multistranded) PVC insulated FRLS and unsheated cable earth continity wire to common earth and connecting to earth dolly for one 6 pin 15 Amp socket outlet point on independent board complete all as specified and directed.

S&F modular switch single pole one way, one module, 230 Volts 6 Amp complete all as specified and directed.

S&F modular switch single pole one way, one module, 230 Volts 16 Amp complete all as specified and directed.

S&F modular socket 6 Amps, 2/3 pin combined, two module, 230 Volts complete all as specified and directed.

S&F modular socket 6/16 Amps, 2/3 pin combined, two module, 230 Volts complete all as specified and directed.

S&F step type modular fan regulator two module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as specified and directed.

Taking down light fitting from exisitng wall/ceiling carfully for re-fixing/kept for shedule of credit all as specified and diredcted.

S&F LED tube light fitting aluminium extruded with decorative ends caps 10 Watt with efficiency of 100 lm/W, IP-20, colour temp not less than 5700, inbuilt electronic driver, PF not less than 0.90, inbuilt surge protection minimum 2.5KV and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED luminaire 600x600mm, 35/36 watt, 220 V AC recessed type with efficiency of more than 100 lm/W and PMMA diffuser soft glare free light complete with driver, holders & high efficient LEDs suitable for roof ceiling including connecting up with driver 3 core flexible copper conductor complete all as specified and directed.

S&F in replacement high prssure die cast aluminium LED Batten light fitting 20W ,100 lumens /watt,IP-20, colour temp not less than 6500, inbuilt electronic driver, PF not less than 0.90, inbuilt surge protection minimum 2.5 KV complete all as specified and directed.

S&F in replacement high prssure die cast aluminium LED Batten light fitting 20W ,100 lumens /watt,IP-20, colour temp not more than 3000, inbuilt electronic driver, PF not less than 0.90, inbuilt surge protection minimum 2.5 KV complete all as specified and directed.

S&F round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with 3 core flexible copper conductor cable, complete all as specified and directed.

S&F LED flood light 70 watt 230V AC outdoor type with thermal management in multiple optics, efficacy of not less than 110 lm/W and equipped with IP 66 protection with impact and corrosion resistant complete with driver and lamp fixed on angle iron bracket complete all as specified and directed.

S&F ceiling fan with accessories 230 V, 1200 mm sweep, BEE 5 star rated, 50 Hz and connecting up ceiling rose to connector block of fan including fabricating and fixing of Fan hooks from ceiling truss/angle iron, required length of down rods (as per site requirement) and necessary nuts and bolts complete all as specified and directed.

S&F fresh air fan 230 volts , 50 Hz 250 mm sweep , PVC body including louvers and cutting of required size and shape in walls/windows for fixing the same complete all as specified and directed.

S&F Water heater storage type, electric, capacity 25 litres AC single phase 230/ 240 Volts and connecting up including PVC pipe line connections, 02 Nos Triangle Brass Cock (Chrome plated) for bathroom Angle Valve for Geyser, making of holes and grouting of nuts and bolts in PCC (1:2:4) B-1 block complete all as specified and directed.

Taking down DBs with MCBs any type/size from exisitng wall carfully for re-fixing after completion of work complete all as specified and directed.

S&F Sheet metal enclosures with socket plug top and MCB' SPN enclosure with a two pin and earth plug and socket complete with one single pole 20 A MCB complete all as specified and directed.

S&F sheet metal enclosures 240 volt 8 way with suitable rated bus bar for Single door IP-43 DB's complete all as specified and directed .

S&F MCB SPN 240 Volt 10 KA 40 Amp conforming to IS complete all as specified & directed.

S&F MCB SP 6 to 32A 240 Volt 10 KA conforming to IS complete all as specified & directed.

M&L for submain wiring with 3 runs (N+P+E) of 2.5 Sqmm single core, PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed/surface PVC conduit pipe of medium duty not less than 20mm dia including necessary PVC conduit specials and connecting with suitable size thimble complete all as specified and directed. Note:-3 runs of 2.5 Sqmm size PVC copper cable and one run of PVC conduit shall be measured as one unit length.

M&L for submain wiring with 3 runs (N+P+E) of 4 Sqmm single core, PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed/surface PVC conduit pipe of medium duty not less than 20mm dia including necessary PVC conduit specials and connecting with suitable size thimble complete all as specified and directed. Note:-3 runs of 4 Sqmm size PVC copper cable and one run of PVC conduit shall be measured as one unit length.

M&L for submain wiring with 3 runs (N+P+E) of 6 Sqmm single core, PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed/surface PVC conduit pipe of medium duty not less than 20mm dia including necessary PVC conduit specials and connecting with suitable size thimble complete all as specified and directed. Note:-3 runs of 6 Sqmm size PVC copper cable and one run of PVC conduit shall be measured as one unit length.

M/s Ruchi Rabh associates (BID ID -3350143)

IMPERIAL ENGINEERS (BID ID -3341756)

Shree Durgai Construction Co. (BID ID -3347895)

Shri Radhey Associates (BID ID -3341518)

GOEL INFRATECH (BID ID -3341758)

M/S S P BUILDERS (BID ID -3341360)

MOHAN LAL GUPTA (BID ID -3349339)