REPAIR TO FENCING AND PATHWAY IN AOR OF GE (A) AHMEDABAD

Amount

Demolition of brick work or stone masonry built in cement mortar including all quoins & jambs etc. complete all as specified and directed.

M&L brickwork with fly ash/AAC bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:4 by using old size bricks complete all as specified and directed.

M&L half brick thick brick work with sub class "B" bricks straigth or curved on plan exc 6m mean radius built in CM (1:4)complete all as specified and directed.

M&L mild steel TMT bar 10 mm dia or above as in rainforcement cut to length bend to shape required and binding with and incl mild steel wire (annealed ) not less than 0.9 mm dia complete all as specified and directed..

M&L for Mild steel TMT bar 8 mm dia as in stirrups incl bending and binding with and incl mild steel wire not less than 0.9 mm dia complet all as specified and directed.

M&L Formwork, rough finished to sides and soffits of floor or roof beams, beam haunch girders, bressummers,lintels, cantilevers, shelves including supports,overhangs etc. also splays between floors and beams, etc. complete all as specified and directed.

M & L for providing reinforced cement concrete Nominal mix type B1 1:2:4(20mm graded agreagate) in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed

M&L plain cement concrete 1:4:8, Type D-2 (using 40mm graded aggregates) as in foundations, filling and mass concrete etc complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specially provided for as in surface channel complete all as specified and directed.

Dismantling of Barbed wire fencing of any description and in any positioncomplete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section incl taking out embedded portion and making good disturbed ground (post embedded in PCC) complete all as specified and directed.

Excavation in post hole for similar holes each n exc 0.50Cum getting out returning filling in and ramming earth around in layers nexc 25 cm watering and removed surplus soil to a distance nexc 50m and making good surface in soft/loose soil complete all as specified and directed.

M & L for cement concrete 1:3:6 type C2 using (40mm graded stone aggregate) as in foundation filling mass concrete complete all as specified and directed.

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh/welded steel wire fabric etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Taking down cement plaster on brick or stone wall including racking out joints, hacking for key scrubbing down with water etc complete all as specified & directed.

M&L rendering 15 mm thick in CM (1:4) on brick work or concrete surfaces mixed with water proofing compound incl chajja, facia etc, finished the surfaces even and smooth without using extra cement mixed with water proofing compoundcomplete all as specified and directed.( WPC measured separately)

M&L for applying two coats of cement base paint on new plastered surfaces of wall over a coat of primer complete all as specified and as directed.

M&L for PCC (1:2:4) type B-0 using 20mm graded crushed stone agg as in coping, benching, holdfast, fixing of fencing post above wall etc,finished even and smooth using extra cement incl necessary form work complete all as specified and directed.

M&L for providing precast cement concrete louvres and jallies, 25mm thick (measured solid) type B0 1:2:4 using 12.5mm aggregate set in cement mortar 1:4, including all mouldings(Post shall be measured separately) complete all as specified and directed.

M&L for Providing precast ce- ment concrete type B1 1:2:4(20mm graded aggregate) set in cement mortar 1:4 in columns, posts, boundary pillars, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed by Engr-in-Charge.

S & F galvanised two strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts incl securing or laying at crossing with and provision of mild steel wire staples or steel pins etc complete all as specified and directed.

M & L for preparation of new steel surfaces exc 10cm width or girth and apply one coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for 75 mm thick PCC(1:4:8) type D2 using 40mm graded stone agg as in sub base finished even and rough complete all as specified and directed.

M&L for 80mm thick rubber moulded coloured Machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size confirming to IS 15658-2006 of M-40 Grade complete all as specified and directed.

M&L for 60mm thick rubber moulded coloured Machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size confirming to IS 15658-2006 of M-40 Grade complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for glossy finish Chequered cement concrete tiles 30cm x 30cm x 20-25mm thick with grey cement and pigment and , set, jointed and pointed in neat cement slurry in floors incl 15mm thick screed bed CM 1:6 complete all as specified and directed.

M&L for precast cement concrete Type B1 1:2:4 (20 mm graded aggregate) in appex stone/kerb stone with plain fair faces including chamfers, weathering throting etc and set in cement mortar 1:4 complete with joints to math size and shape as approved by engr-in-charge

TECH SERVE SOLUTIONS

GIRNAR CONSTRUCTION