CERTAIN REPAIRS SUCH AS JOINERY SANITARY FITTINGS FLOORING PLASTERING ETC IN TECH AREA AT AF STATION HALWARA

Amount

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of any description, not exc. 1.5 Sqm each.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of any description of exc 1.5 sqm but n.exc 4 sqm each

Taking down of shutter of any description exc 1 sqm but n. exc 2 Sqm each.

Taking down of shutter of any description not exc 1 sqm each.

Dismantling wrought iron work or mild steel work of any description not otherwise provided for.

Hacking out old broken glass panes of any thickness description from wooden or metal frame , glazed with putty or fixed with beads & having area not exc 0.50 sqm in each pane complete all as specified.

Taking up or down 15mm bore steel water tubing and connection including cleaning for re fixing or removal to store complete.

Taking down eaves gutter and rain water pipes (of any size and patern), including all fittings and, heads, shoes, bends, swan-necks, etc incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accesaries).

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15cm thickness below or above ground level & removal out side Mod land.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins,arches,pillars etc but excluding ashlar facing, dressed stone masonry.

Dismantling floor hearth or wall tiles including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises of Mod.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillets of any description all as specified and as directed.

S&F 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

S&F 40mm thick flush shutters, solid core construction with black board core and plywood face panels, commercial type on both sides, both faces are covered with decorative face veneer with lipping/frame to match.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube,suppling and fixing in opening as per specification and drawing and edges will be painted match with printed sheets.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS frame shall be covered with heat, moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent ement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & 5mm thickx15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mmx10mm (90).

Factory made soild PVC moulded door shutters 28 to 30mm thick (stile), with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drg.

Framed work with Fe-410W (Gde-E-250) quality-B as in doors or gates of angle or other section with gusset plates, rails,braces, etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging, also fastening and.

M&L for steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, devetailed or welded all as specified and directed.

Steel ventilators with centre hung shutter including hinges, steel peg stay, complete.

Aluminium door frame of size 100x40x1.5mm thick (powder coated minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebats including jointing cleats for fixing etc complete all as specified.

S&F powder coating aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, zing clips, ruber neoprene packing, handles 2 nos in each door, tower bolt, hinges, anodised aluminium snap beading screws complete all as specified (minimum thickness of powder coating 50 micron).

S&F powder coating aluminium window and ventilator shutters,side hung type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, zing clips, ruber neoprene packing,anodised aluminium snap beading screws anodised aluminium fittings such as peg stay. Tower bolt 150mm long 1 No, hinge type B-21 100mm long 2 Nos, suitable handle 1 No complete all as specified and as directed (minimum thickness of powder coating 50 micron).

S & F Powder coating aluminium window and ventilator shutters, fixed type without sash bars, aluminium section weighing 0.55 kg/ m including necessary joining cleats, zing clips, ruber neoprene packing, anodised aluminium snap beading screws anodised aluminium fittings such as peg stay, Tower bolt 150mm long 1 No. hinge type B-21 100 mm long 2 Nos, suitable handle 1 No complete all as specified and as directed (minimum thickness of powder coating 50 micron).

Supply and fixing for Powder coating aluminium grills of any pattern/design weight not less than 1.5kg per square meter complete all as specified and as directed

Supply only Oil Putty for Glass.

S & F 150mm size aluminium anodised, barrel tower bolt of extruded section and fixed.

S&F 150mm size Brass barrel tower bolts with barrel extruded section and fixed.

S & F 150mm size extruded section aluminium alloy handles, fabricated type anodised.

S & F 150mm size extruded brass handle, fabricated type polished and fixed.

S & F 300mm long alumunium alloy sliding door bolt with hasp & staple and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed .

S & F 200mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple(bolt type) and fixing bolt with rolled or drawn brass bolts and fixed

S & F in repair 300mm long alumunium alloy sliding door bolt with hasp & staple and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S & F mild steel butt hinges cold rolled medium weight of 100mm long

S & F butt hinges, extruded brass with mild steel hinge pin, bright polished and fixed, type B-12 of 100mm long

S&F Door closer Cast iron body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg

All as per SI item No.37 above but fixed in repairs.

S&Fgalvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or Galvanised wire staples.

All as per SI item No.39 above but fixed in repairs.

S & F Aluminium Mortice lock vertical type 100mm 4 Levers

Mortice latch with two levers(vertical type), brass body 100 mm 4 levers

S & F 3 mm thick sheet glass ordinary quality and fixing in frame with glass putty or fixed with wooden beads having area not exc 0.50 sqm in each pane complete all as specified

S &F in repairs MS coloured hollow curtain rod 19/20 mm dia with two Nos decorative type brackets knobs for each rod of length not exceeding 1.80 mtr including fixing with suitable arrangements complete all as specified and directed.

S & F in repair double wall layer rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 ltrs complete all as spcified as as directed.

S & F in repairs 20 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

S & F in repair wash down water closet (Pedestal pattern) including seat cover and stainless steel water jet including connection to drain pipe (outgoing pipe) and to flush pipe, antisyphonage pipe etc complete all as specified.

S&F in repairs vitreous China Urinal flat back, half stall type, white with 32mm bore PVC waste pipe of length 900mm to 1200mm and including self closing angle cock pressmatic for urinal with flange and 200mm connecting pipe with 15mm dia pipe.

S&F in repair vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rest excluding flishing cistern and flush pipe complete incl. provn of cement concrete bedding.

Suuply only PVC valve less, symphonic action type, flushing cistern of 10 ltrs, low level, white, with inlet, ball valve, float and handle including brackets

All as per SI item No 50 above but in repairs.

S & F in repairs Chromium plated health faucet (hand spray) with 1mtr long PVC flexiable pipe 15mm bore and fixed to in position etc complete all as specified and directed.

S & F in repair vitreous china wash hand basin white flat back size 550mmx400m excluding , waste chain and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets or erecting stand , fancy type pillar taps cast copper alloy chromium plated of 15mm bore, wate coupling and waste pipe complete all as specified.

S & F in repairs 15mm bore fancy type pillar tap cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle complete all as specified and as directed.

S & F in repairs 15mm bore pipe fancy type stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle of 15mm bore complete all as specified and as directed

S & F in repairs 15mm bore pipe fancy type bib tap cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle for iron pipe or brass ferrule and fixing complete all as specified and as directed

M & L for 15mm bore GI tubing medium grade with all fittings complete fixed to wall, ceiling or laid in floors complete all as specified.

Fixing only old serviceable 15mm bore GI tubing of any grade with all new fittings, fixed to walls, ceilings or laid in floors in old or new position complete all as specified

S&F in repairs Tubular towel rail, 20mm dia and 60 cm long, fancy type.

S&F chromium plated paper holder size-150mm fixed to walls with chromium plated brass screws.

S&F chromium plated soap dish of size not less than 100mm fixed in wall.

Supply & Fixing 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S&F PVC (SWR) bend for 110mm bore pipe.

S&F in repairs stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory, with plug, waste pipe, washers incl. cantiliver cast iron brackets, connecting union etc overall size 915mm X 460mm with bowl size 410mm X 330mm X 160mm.

S&F in repairs 1mm thick stainless steel kitchen plate rack fixed in wall having overall size 600mm X 750mmX 250mm complete.

S&F PVC connection pipe 15mm dia with PTMT nut for length 375mm

S&F PVC connection pipe 15mm dia with PTMT nut for length 900mm

M&L Screed bed or bedding layer of mortar 15mm thick for laying floor finished in CM 1:6.

All as per Si item No.69 above but 20mm thick.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 rough finished surfaces to receive tiles

M&L 25mm thick cement concrete type B-0 using 12.5mm graded crushed stone aggregate as in sub base finished even and fair surfaces without using extra cement.

M&L coloured Non - skid Ceramic tiles joint free 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

Vitrified ceramic tiles joint free light shade 10 mm thick (Square/Rectangular) polished area of ech tiles n. exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete.

ditto as item No 74 as above but in skirting complete.

M&L Coloured Glazed ceramic tiles in vertical surface 300x200x7mm thick in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L 20 mm thick Granite (of any type) work (tabler rubbed and polished) in steps, jambs,pillars,window-cills, cooking platforms and like over 10mm thick rendering in CM 1:4, incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

M & L for chequered cement concrete tiles 300x300x25 mm thick, prepolished, set and jointed and pointed in neat cement slurry in floors with rubber finished.

M & L for 12 mm thick Granite (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete

S & F in repairs Anodised aluminium snap grid frame work for false ceiling, size of grid 605x605mm including hangers, cleats, fasteners, Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified.

S & F Providing and fixing Gypsum Board 8mm thick in ceiling fixed with screw as per manufacturers instructions, 60x60cm in size all as specified and as directed

S & F PVC wall lining consisting of 7-8 mm thick hollow printed colour PVC sheet inclusive of solvent cement complete all as specified and as directed by Engr-in-Charge.

Brick work with sub class 'B' bricks (old size bricks) straight or curved on plan exc 6 m mean radious built in CM 1:6 complete all as specified

Material & Labour for 15mm thick plaster in CM (1:6) finished even and fair without using extra cement

Taking down cement plaster of any description on brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc. Complete all as specified and directed.

Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, using WPC @ 3% of cement all as specified and directed & finished even and smooth without using extra cement(wpc paid saperately)

Supply only integral waterproofing compound

M&L Rendering 5mm thick on fair faces of ceiling in CM 1:3 finished surfaces even and smooth without using extra cement

Preparation of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot mould moss and efflorescent salts trading oil and greasy spots, filling holes cracks with wall care putty all and applying a coat of white wash complete all as specified and directed

All as per SI item No.90 above but on ceiling.

All as per SI item No.90 above but one coat of oil bound distemper on wall

M&L for preparation of new plastered surfaces, applying birla putty compound , primer coat & two coats of distemper oil emulsion, white or tinted, complete all as specified and as directed.

Preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed.

Preparation of new plaster surfaces of wall and applying two coats of synthetic enamel paint over a coat of priming paint plaster coat in camoflaging pattern to match with the existing pattern, complete all as specified and as directed.

M&L Painting two coats of synthetic enamel paint over a coat of red oxide including preparation of new steel surfaces of any description over 10cm in width or grith not other wise described. Complete all as specified and directed.

M&L Painting two coats of synthetic enamel paint over a coat of pink primer including preparation of new woodenl surfaces of any description over 10cm in width or grith not other wise described. Complete all as specified and directed.

M&L Providing and injecting chemical emulsion for post constructional anti-termite treatments along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litre per linear meter including drilling and plugging holes etc in apron

M&L Providing and injecting chemical emulsion for post constructional anti-termite treatments of soil under existing floors using emulsion @ 1 litre per hole, 300mm apart including drilling and plugging 12mm dia holes with CM 1:2(1 cement : 2 coarse sand) to match the existing floor.

M/S SANGA SINGH AND CO

CHOUDHARY ENTERPRISES

OM CONSTRUCTION CO.

JINDAL AND COMPANY