WBPWD/EE/BNWD/NIT24e/2025-26/4

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Dismantling all type of plain cement concrete works, stacking serviceable materrials at site and removing rubbish as directed with in a lead of 75 m In ground floor including roof. Upto 150 mm. thick.

Clearing compound premises of shurbs, plants, jungles etc.By cutting and removing as directed (Specific permission of Engineer- in-Charge prior to execution will be necessary). (Payment to be made on area cleared)

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with theMunicipal/Corporation Rules for such disposal, loading into truck and cleaning the site inall respect as per direction of Engineer in charge

Filling in foundation or plinth by Fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to bemade onmeasurement of finished quantity)

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominalsize) excluding shuttering and reinforcement, if any, in Ground floor as per relevant IS codes. Pakur variety.

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in - Ground floor

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:4 cement mortar 15 mm thick plaster

Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brandconforming to IS 15622: 2006 (Group B I a and tested as per IS 13630: 2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤0.08%] in floor, skirting etc. set in20 mm thicks and cement mortar (1:4) bed prepared after application of slurry using 1.75Kg of cement per Sqmover the base and 2mm thick cement slurry using cement @2.91Kg./sqm at the back side of the tiles and laid over the mortar bed using 0.2kg/sqm of White cement used for joint filling with approved pigment as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, Iabour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer) ln Ground FIoor:(size not Iess than 600mmX 600mm X9.5 mm thick)

Supplying, fitting & fixing 1st quality designer mosaic tiles of size 24.7 cm X 12.2 Cm, 0.8 cm thick for the use of swimming pool walls and floors to match with the existing work & 4 nos of key stones (10 mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.