Repairing/Replacement of Fire fighting system in Delhi Police Bhawan, Asaf Ali road, Delhi.

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC Conduit including dismantling as required. Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

c) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 Volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) etc as required a) 8 way (4 + 24 Double door

Supplying and fixing of 5 ampers to 32 ampers rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required. a) Single pole

Providing and fixing of following rating and breaking capacity and pole MCCB in existing TPN DB including, making connections, etc. as required. a) 100 Ampers, 16 KA, breaking capacity TPMCCB (Icu = 100% Ics)

b) 125 Ampers, 16 KA, breaking capacity TPMCCB (Icu = 100% Ics)

Supplying and fixing of 400 mm sweep size wall mounted fan complete with inbuilt Electronic Regulator, Blade, wire lead with moulded plug top etc as required.

Supplying, installation, testing & commissioning of energy efficient 1200 mm sweep size ceiling fan, including wiring the down rod of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on fan box etc as rquired

Supplying and fixing of PVC channel of following size perforated type heavy duty with cover on surface or wall complete etc. as required. a) 100 mm X 75 mm

b) 100 mm X 100 mm

c) 150 mm X 150 mm

Supplying, Installation, Testing and commissioning of 8 Zones microprocessor based Networkable Programmable communicator master Fire Alarm Control Panel (each zone accessing minimum 50 numbers units) wall mounted type fabricated out of 1.2/1.6mm CRCA sheet, dust and vermin proof, powder coated, complete in all respect suitable for operation on 220Volts, AC supply, 50 Hz, power Supply and battery charger. The panel shall be (ERTL/TAC/CE/LPCB/EN-54 certified) with standard features etc as required.

Supplying, laying and fixing of following sizes PVC insulated and PVC sheathed armored aluminum conductor power cable of 1.1 KV grade (Duly ISI marked) on surface etc. as required. a) 4 X 25 sq. mm

b) 4 X 50 sq. mm

Supplying, laying and fixing of following sizes PVC insulated and PVC sheathed armored aluminum conductor power cable of 1.1 KV grade (Duly ISI marked) on RCC/Hume/Metal pipe etc. as required. a) 4 X 25 sq. mm

b) 4 X 50 sq. mm

Supplying, installation, testing & commissioning of energy efficient recessed mounted type 34W to 38W full window glare free opal diffuser LED panel luminaries of size 595mm x 595mm (nominal size) suitable for both Armstrong/POP/Geypsum Board or grid false ceiling fabricated with MS powder coated white CRCA housing including mounting with the help of chain/other suitable method, hanging from the ceiling including connections with 3 x 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. The Total system Lumen of 34W to 38W LED should be 3600 with minimum system efficacy of 100 lumen /watt colour temperature 5500K to 6500K, power factor>0.95, CRI (Ra)>75, THD <10%, with APFC driver having driver efficiency >85%, operating voltage 150-270 volts with minimum 2.5KV surge protection. The luminaries shall be submitted with LM-80 report with a life of 50000 Hours @ L-70 and LED photo biological safety report conforming to IEC 62471 & LED source manufacturer and LM-79 report from NABL accredited Lab. The LED chip should be of Cree, Nichia, Philips Lumiled, Osram, Edison.

Supplying, installation, testing & commissioning of 20W to 22W, 6000K (1200 mm) energy efficient LED wall mounted light luminaries, extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver, suitable to work on 230 volts, AC supply complete with connection etc. with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required at site .

Supplying and drawing of following size of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/ PVC conduit etc as required a) 2 x 1.5 sq mm

b) 3 x 1.5 sq mm

Supplying, Fixing, Testing & Commissioning of Optical smoke detectors with short circuit isolator base and LED alongwith connection etc, as required.

Supplying, Installation, Testing and commissioning of Rise cum Fixed Temperature Heat Detectors etc as required.

Providing & Fixing of Brass Sprinkler heads pendent / upright type 15mm diameter to operate at 680°C etc as required.

Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/3589 in ground including fitting like elbows, tees, flanges, tapers, nut bolts, gaskets etc. & providing cement concrete blocks as support, anticorrosive treatment with coaltar/asphalt tape, as per IS 10221, of following size complete as required including dismantling of existing M.S pipe etc as required. a) 150 mm diameter

b) 100 mm diameter

Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/3589 in existing surface including fitting like elbows, tees, flanges, tapers, nut bolts, gaskets alongwith angle iron frame work etc. with the help of dust fastener including anticorrosive treatment with the following size complete etc as required Including dismantling of existing M.S pipe as required. a) 150 mm diameter

b) 100 mm diameter

c) 80 mm diameter

d) 50 mm diameter

e) 25 mm diameter

Supplying, Installation, Testing and commissioning of Butterfly valves (CI lever gear operated) of PN 1.6 rating with S.S Disc of following size on existing pipe line including cutting of pipe with nut, bolt and gasket etc as required. a) 150 mm diameter

b) 100 mm diameter

c) 80 mm diameter

Supplying and fixing of Stainless steel Single headed hydrant valve with 1 No. 63 mm diameter instantaneous FM Stainless Steel coupling and cast iron wheel (duly: ISI marked), confirming to IS 5290 (type A) with blank plastic cap and chain etc as required.

Supplying and fixing of 63mm diameter, 15 Meters. long RRL hose pipe with 63mm diameter male and female Gun metal couplings duly binded with GI wire, rivets etc. conforming to I.S. 636 (Type-A) etc as required.

Supplying and fixing of first-Aid hose reel with MS construction spray painted in post office red, conforming to IS 884 with upto date amendments complete with the following etc as required. (a) 30 meter long 20mm (nominal internal) diameter water hose thermoplastic (Textile reinforced ) Type-2, as per IS : 12585 (b) 20 mm (norminal internal) diameter gun metal globe valve & nozzle. (c) Drum and brackets for fixing the equipments on wall. (d) Connections from riser with 40 mm diameter stop valve (gun metal) & M.S. pipe.

Supplying and fixing of hose cabinet of size 900mm x 600mm x 500mm made out of 2 mm thickness MS sheet with 6 mm thickness glazed glass doors including necessary locking arrangement suitable to accommodate external hydrant with butterfly valve, 2 Nos. 15 Meters long hose pipe, 1 No branch pipe, mounted on wall or raised brick platform & duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant etc as required.

Supplying and fixing of 2 way fire brigade connection of cast iron body with 2 Nos. Gun metal male instantaneous inlet couplings complete with cap and chain as required for 150mm diameter M.S. pipe connection, confirming to is 904-1983, etc as required.

Supplying and fixing of 4 way fire brigade connection of gun metal body with 4 Nos. Gun metal male instantaneous inlet couplings complete with cap and chain as required for 150mm diameter M.S. pipe connection, confirming to is 904-1983, etc as required.

Supplying & fixing of ABC (stored pressure) type fire extinguisher having 6 kg capacity (Duly ISI marked) filled with MAP 90% ABC powder with Silk Screen Marking including fixing with dash fastener & clamp etc complete as required

Providing & Fixing of SS short Branch Pipe of 63 mm Diameter etc as required

Supplying, installation, testing & commissioning of cast iron slim seal dual type check valve (PN-1.6) complete with matching Flanges, nut ,bolt, washer as required etc. of following sizes:- a) 100 mm Diameter

Supplying, installation, testing & commissioning of CI body sluice valve (PN-1.6) with nut, Bolt, gaskit as required of following sizes:- a) 80 mm Diameter

b) 100 mm Diameter

c) 150 mm Diameter

d) 200 mm Diameter

Supplying, installation, testing & commissioning of CI body NRV (PN-1.6) with nut, Bolt, gasket as required of following sizes:- a) 80 mm Diameter

b) 100 mm Diameter

c) 150 mm Diameter

Supplying, installation, testing & commissioning of Gun metal Ball valve of suitable pressure and of following sizes:- a) 25 mm Diameter

b) 50 mm Diameter

Supplying, installation, testing & commissioning of 200 mm Diameter 1200 mm high Air vessel complete with paint, Pressure Guage, Pressure Switch, Air release valve ,Drain Valve, etc as required.

Supplying, installation, testing & commissioning of pressure guage with Gun Metal ball valve Dial diameter 100 mm (0 to 14 kg/sq.cm) complete with fitting etc as required

Supplying, installation, testing & commissioning of Pressure Switch Complete with Ball valve & fitting etc as required

Repairing and overhauling of following capacity pumps sets for fire fighting purpose installed at Delhi Police Bhawan with the help of chain pully block after dismantling the existing pump sets and replacement of required nut bolts, packing material and balancing of shaft with the help of lathe machine etc as required including reassembled the same on the existing location including testing, commissioning etc as required. a) 15 HP capacity Jokey Pump sets

b) 50 HP capacity main fire pump sets

c) Diesel Engine Pump sets

Supplying, installation, testing & commissioning of Gong Bell of 150 mm diameter complete with sluice valve and all accessories etc as required.

Less credit for following existing accessories after dismantling the same from the site under buy back arrangement. a) Ceiling Mounted luminaries (FTL)

b) Ceiling Fans/Wall fan

c) Panel board and DB's

d) Damaged conduit and wire

e) TPDB complete

Aas Electric Company

Classic Refrigeration Works

M/s Royale Meridian India Pvt Ltd

aditya engineers

FIRE REMEDY SYSTEMS

Krishna Electreical Works