MISC REPAIR TO JOINERY, PLUMBING, PLASTERING, FLOORING, SANITARY FITTINGS AND OTHER RELATED WORKS FOR CERTAIN OTM AND MD ACCN OF 7E AREA AT MIL STN PITHORAGARH UNDER GE PITHORAGARH.

Amount

DESCRIPTION OF ITEMS

Demolition of cement concrete of any description and in any position not otherwise specifically provided for.

Demolition of cement concrete(reinforced) of any description and in any position not otherwise specifically provided for.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L 25 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggrigate as in floor /roof surface and finishing the surface even and smooth w/o using extra cement complete all as specified

M&L PCC 75mm thick 1:4:8 of type D2 using 40mm graded stone aggregate as in sub base and similar complete all as specified and directed.

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection laid in alternate panels 75mm thick finished even and smooth w/o using extra cement.

Forming construction joints 30mm deep x 10mm wide filled with sealing compound grade 'A'

M & L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole cover, shelves, chajjas etc and set in CM 1:6 complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified.

M&L for Vitrified Ceramic tiles (Double charge)dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match

Ditto all as per item No 10 but on vertical surfaces over 10 mm thick rendring in CM 1:4

S &F coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match.

S &F coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match.

Ditto all as per item No 13 but on vertical surfaces over 10 mm thick rendring in CM 1:4

S&F coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendring in CM 1:4 complete all as specified and as directed.

S&F non skid tiles, exterior grade, chequered/grooved pattern of size 300x300mm/ 400x400mm 8-10mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and incl 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

S&F chequered tiles rubber moulded decorative designed cement concrete tiles 25 mm thick size of tiles as approved set, jointed and pointed in neat cement slurry with grey cement and pigments in floor incl 15 mm thick screed bed with cm 1:4

Dismantling of tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc

M&L PCC 1:2:4 type B1 (20mm graded aggregates) as coping, bed block, Haunching/ benching of drains/coving/ sides of any type of tiles etc and similar work

M&L precast cement concrete Block Masonary with soilid blocks type C1 1:3:6 20mm graded stone aggregate exc 10cm in width and setting in mortar 1:6 incl Demolition of Precast concrete block walling built in cement mortar complete all as specified and directed .

Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc.

M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 finished fair and even complete all as specified and directed.

M & L 15mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even complete all as specified and directed.

M&L 5mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection complete all as specified and directed

M&L for applying two coat of cement base paint over a coat of alkali resistant primer on new plastered surfaces of wall all as specified incl prepration of surface

M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of alkali resistant primer over 1 mm thick wall care putty all as specified complete all as specified

M&L three coat of white wash on walls including preparation of new plastered surface and complete all as specified.

M&L for three coats of white wash on ceiling/Chhajja (undecorated) surfaces incl preparing of surfaces complete all as specified and directed.

Cutting chases in brick wall, stone concrete block or slab walls, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades, shelves , lintels, etc and cutting chases for concealed water tubing and making good , cutting n'exc 10 cm girth complete all as specified and directed.

S&F 15 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor including taking down old tubing complete all as specified and directed.

S&F in repairs 20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor including taking down old tubing complete all as specified and directed.

S&F in repairs 25 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor including taking down old tubing complete all as specified and directed.

S&F in repairs 25mm bore of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 25mm -440 gms )complete all as specified and directed.

S&F in repairs 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms )complete all as specified and directed.

S&F in repair 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.

Ditto but with long shank and cup (concealed type)

S&F in repair 15mm bore fancy type, CP Brass Bib taps with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F in repair 15mm bore fancy type two way CP Brass Bib taps with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F in repairs 15 mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed

Do - all as per above item but 20 mm bore

S&F in repair CP brass wall mixer for mixing hot & cold water screwed down for iron pipe and fixed

S&F CP Brass basin mixer for mixing hot & cold water screwed down for iron pipe and fixed

S & F in repairs vitreous china hand wash basin white exclusive quality size 550 x 400 mm including brackets, PVC waste pipe and waste coupling including cutting for and pinning in ends of brackets or erecting stand fixed complete all as specified and directed.

S&F 15mm bore dia pillar tap cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm bore dia pillar tap cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 600mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S&F in repairs Brass chromium plated Tubular towel rail , 20mm dia, D type , 60cm long between falnges complete all as specified and directed.

S&F in repairs vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests including connection to trap, and to flushing pipe, anti syphonage pipe, etc complete making good to floors and complete all as specified and as directed.

S&F in repairs viterous China wash down water closet (pedestal pattern) complete, incl toilet paper holder, Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, health faucet jet (excluding flushing cistern and flushing pipe) all as specified.

S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle complete all as specified and directed.

S&F in repairs 500 liters capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including connections all as specified.

S&F in repairs 1000 liters capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including connections all as specified.

Taking down chowkats or frames exc. 1.5 but n.exc 4m2 each with shutters (W/o taking off shutters from the frame) and removal to store.

-Ditto- but n.exc 1.5m2 each -ditto-.

Taking down shutters of any description exc. 1 Sqm and nexc. 2 Sqm each and Ditto

S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc Including cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as for filling in door frames etc complete, as specified and as directed.

S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc Including cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as for filling in door frames etc complete, all as specified and as directed.

S&F 2nd class hard wood plain solid straight chowkhats and frames, wrought framed rebated on solid round or chamfered put together with glue pinned at joints supplied and fixed.

S & F 2nd class hard wood 30 mm thick, plain framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged ), or of veneered particle board medium density, wood particle board with commercial face veneers all as specified and directed by Engr-in-Charge .

S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 30 mm thick IInd class hard wood glazed skelton shutters open rebated and prepared to recive glass,guage etc (W/o sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of sutters as specified in SSR part - I section - 8, clause 8.20 (a). S&F to chowkhat.

S&F factory made solid PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of M S tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PCV ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawings.

S & F Butt hinges 100mm, extruded aluminium alloy with galvanized mild steel hinge pin, anodised complete all as specified and as directed.

S&F 200mm aluminium anodised barrel tower bolts of extruded section all as specified

S& F 125 mm extruded aluminum alloy handles, fabricated type anodised.

S&F 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified

S&F 75 mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified

S&F mild steel barrel tower bolt of size 200mm stove enamalled black with bright bolt and fixed complete all as specified and directed.

S&F mild steel barrel tower bolt of size 150mm stove enamalled black with bright bolt and fixed complete all as specified and directed.

S&F Mild steel sliding door bolt of size 300mm plate type stove enamelled black with bright not lessthan 12mm dia with and including minimum of 6 bolts and nuts four on plate and two on staples plat and fixed complete all as specified and directed.

S&F mild steel pressed handle oval type stove enamalled black size-150mm complete all as specified and directed.

S&F Extruded aluminium alloy handles, fabricated type, anodised size-150mm complete all as specified and directed.

Taking down building hardware any type in any position complete all as specified and directed

S & F M.S. Framed work such as grills grating etc. with ends of bars sholdered and / or riveted into spikes, framed guard bars / railings all as directed.

S&F steel window with side hung shutter including Box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed welded complete all as specified and directed.

S&F steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed welded complete all as specified and directed.

S & F steel ventilators with top hung shutters incl. hinges, steel handle and steel peg stay complete with glazing sash, dovetailed or welded after taking down old one

S&F Stasinless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple.

S&F in repairs Stasinless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple.

S&F in repairs 28mm dia fancy type Stainless steel dropery rod fixed with stoper, brackets etc to wall complete as sample approved all as specified and directed by Engr - in - charge.

S&F for 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m including Hacking out old broken glass (any thickness, size, quality or description) from steel frames or fixed with beads complete all as specified and directed.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square nexc. 0.5 sqm in each pane all as specified

All as above but 3mm thick sheet glass ground or Obscured or frosted on one side and ditto

M & L preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces all as specified.

Taking down aluminium shutter of any size and refixing after rescuring the pintols/hinges,oiling, adjusting floor spring providing packing if required complete all as specified

S&F in repairs Door closer hydraulically regulated designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel

S&F anodized aluminium door & frame powder coating (minimum thickness of powder coating 50 micron) 2 mm thick incl 5.50mm thick tinted glass, fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02 Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200mm long 02 Nos on each shutter and mortice lock device complete with double keys for each lock, 01 No floor spring for each shutter complete all as specified and directed with following specifications :- (a) Aluminium door frame =101.50x44.45mm (b) Aluminium style/top & middle rails of shutter=83.5x44.45mm (c ) Aluminium bottom rail of shutter=114.50x44.45mm (d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed.

S & F Anodised aluminium window and ventilator shutters,powder coated any colour as approved for fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F standard aluminium section powder coated any colour as approved for window frames/shutters sliding/ partitions etc including jointing cleat and rubber beading/linning, Pivot ,locking aragement and all hardware etc and fixed in position with stainless steel screws all as specified and as directed.

S&F Powder coated aluminium grill of approved design /pattern with minimum anodized coating of grade AC15 with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @200mm centre to centre ,including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard F/C section around the opening all complete as per requirement and direction of Engineer in charge.

S&F in repair sheet glass 5.5 mm thick ordinary quality and glazing with rubber neoprene packing in square n.exc 0.5 sqm in each pane complete all as specified

S&F in repair sheet glass 5.5 mm thick ordinary quality and glazing with with rubber neoprene packing in square exc 0.5 sqm in each pane all as specified

Dismantling of plain or corrugated steel sheeting any gauge/thickness in roof covering etc, complete all as specified and directed

S&F for 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 and fixed with `J' or `L' hooks including with washers as in roof covering, wall etc. complete all as specified and directed.

M & L, Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length complete all as specified and directed.

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

-- ditto -- as per above item but except CGI Sheet complete all as specified and directed.

Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board/ slabs/ blanket, any thickness, including cover fillets

S&F false ceiling with 4mm thick E-board 'Everest' make white prelaminated set embosed reinforced designer ceiling board of approved texture fixed with GI imposed grid frame work of size not more than 600x600mm having 24mm wide T-section, runner made of 0.33mm GI sheet and angle made of 0.45mm GI sheet suspended with 2mm dia stainless steel wire complete all as specified. Note:- All exposed surface of grid frame work shall be powder coated white.

S & F Solid PVC Wall Lining consisting of 5mm thick Single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

M & L Preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified

Granite (of any type) work (table rubbed and polished) 16-18 mm thick in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed of CM (1:6) complte all as specified and as directed.

Granite (of any type) work (table rubbed and polished) 16-18 mm thick for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complte all as specified and as directed.

S&F in repairs Stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915 mm x 460 mm with bowl size 410 mm x 330mm x 160 mm complete all as specified and directed.

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mmcomplete all as specified and directed.

Taking down eaves gutters and rain water pipes ( any size or pattern) incl all fittings , shoes, bends, swan neck etc. and removal to store

S&F 110 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl PVC holding clamps complete all as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl PVC holding clamps complete all as directed.

S&F 110 mm bore PVC (SWR) bends any radius

S&F 75 mm bore PVC (SWR) bends any radius

S&F 110 mm bore PVC (SWR) junction single (Single T) equal or unequal

S&F 75 mm bore PVC (SWR) junction single (Single T) equal or unequal

S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3

M&L for Providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application after cleaning the surface completely to eliminate all sharp portion over 10 mm thick screed bed in CM (1:4) mixed with WPC @ 3% of weight of cement or as per manufacturers instructions, including removing old APP membrane complete all as specified.

M&L for preparing new surfaces of treated roof and applying a coat of alumnium paint complete all as specified and directed.

S&F in repairs 25 mm thick boarding of 2nd class hardwood as in flooring or skirting ,Planed one side, with butt joints and fixed with nails supplied and fixed complete all as specified and as directed

M/L for 14 mm to 16 mm thick baroda green stone slab toping table rubbed and mirror polished over 15 mm thick screed bed or bedding layer ( 1:4) and jointed with white cement slurry mixed pigment to match the colour incl rounded / half rounded edge as in steps, jambs, pillars, window-cills, cooking platforms and like with a hole for gas pipe in cooking platform etc. Including dismentling complete all as specified.

M&L for Second class hard-wood in scantlings, clean sawn framed and fixed including removing old timber complete all as specified and as directed

M&L in repairs for second class hardwood, Plain fillets, square, rectangular or triangular in section, exc 6 sqcm but n.exc 13 sqcm, clean sawn, secured with mills or brads, complete all as specified and as directed.

S&F in repairs 4mm thick Asbestos cement plain building boards, fixed in ceiling to timber framework with screws complete all as speciifed and as directed.

M & L for cement concrete padding of 1:2:4 using 12.5mm graded stone aggregates, 25mm thick in sunken of bath / toilet / WC/ roof slabs etc with adding water proofing compound as per manufacturer's instruction complete all as specified and directed. Note: Cost of WPC shall be deemed to inclusive in quoted unit rate.

S & F in repair 40mm dia light garde GI Pipe spout in wall, floors complete all as specified and directed.

M & L for cement concrete 1:7:12 Type F-2 using 40mm graded stone/brick aggregate as in foundation filling, mass concrete or sunkun etc complete all as specified and directed.

M & L for sunken treatment of of bath / toilet / WC etc by cleaning and removing all the loose mortar, laitance, dirt, dust etc by chisel hammer wire brush and fixing APP modified polymer membrane (weight not less than 3 kg/sqm) over a coat of bitumen not below 1.2 Kg per Sqm as primer over a coat of bitumen not below than 0.3Kg per Sqm over 15mm thick plaster in CM 1:3 with Dr fixit pidilite liquid water proofing solution 200ml per 50Kg of cement at both hozizontal and vertical surface complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick over 15 mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Ditto all as per item No but on vertical surfaces over 10 mm thick rendring in CM 1:4

S&F in repair for CP health faucet (hand shower) with 1.5 m long , SS flexible tube and wall hook complete all as specified and directed

S&F in repair 125 mm CP brass shower rose for fixing with 15mm pipe complete all as specified and directed.

Supply and fixing in repairs PVC water tank covers of capacity exc 250 Ltrs not exc 500Ltrs complete all as specified and directed.

Supply and fixing in repairs PVC water tank covers of capacity exc 500 Ltrs not exc 1000 Ltrs complete all as specified and directed.

S &F in repair vitreous china wall mounted Wash down water closet with inbuilt flushing cistern and closet seat cover including all neceassary fitting , device complete all as specified and directed.

S&F in repair electronic ,battery operated sensor for half stall urinal including neccesary fitting and fixture complete all as specified and directed .

S&F 24 mm thick factory made solid PVC flush Kitchen CB shutter /shutter ,uPVC ,made from co-extruded three layer rigid foam sheet (single extruded process ) with 0.8 to 1mm thick outer face layer having density not less than 1400 kg /cum and density of central core material not less 600 kg/cum , manufactured by an ISO 9001:2015 certified company and fixing in frame at site with and including 03 nos S S hings, 02 Nos S S fancy handle ,02 Nos S S tower bolt, Ball catches with 8mm dai steel ball and brass body and striding plate including letting and inbuilt lockin divice with Key etc for Cup Board / Kitchen cabinets as per specification & drawing complete all as specified and directed Engr-in-charge.

Supply and fixing 30 mm thick Glass Fibree Reinforced Plastic (F.R.P.) panelled door shutter of required colour and approved brand and manufacture ,made with fire -retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings ,cast monolithically with 5mm thick FRP laminate for panels conforming to IS : 14856 , including fixing to frames , complete all as specified by the manufacturer and as per directions of Engineer- in-charge.

S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30 mm thickness .The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat .Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs . the frame shall be covered with fibrer glass from all sides M.S. stay shall be provided at the bottom to steady the frame , complete as specified by the manufacturer and as per directions of Engr-in-charge.

S&F in repair laminated flooring 8.3 mm thick hard board planks make BWG Crona,hampshire, Oak both laminated with decorative surface of make FD spaze ,design No 1890 or its equivalent approved make laid above the thermoplastic sheet as in flooring complete all as specified and directed.

Disconnecting existing over head water storage tanks of capacity exc 200 ltrs but n.exc 500 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and removing all scale and dirt etc from tank and from mouth of circulating pipes etc and hoisting if required reconnecting and re-fixing in position complete including embossing date of completion of cleaning by stencil with using synthetic enamel paint all as specified and directed.

Disconnecting existing over head water storage tanks of capacity exc 500 Ltrs but n.exc 1000 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and removing all scale and dirt etc from tank and from mouth of circulating pipes etc and hoisting if required reconnecting and re-fixing in position complete including embossing date of completion of cleaning by stencil with using synthetic enamel paint all as specified and directed.

M&L for repair to leakage /sepage from 'J' Hooks of CGI /AC/Galvalume roof sheets by replading cup washer and bitumen washer including necessary T & P complete all as specified and directed.

S&F in repair PVC cabinet mirror bathroom box type complete all as specified and directed.

S&F in repair for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.

S&F in repairs 75 mm dia CP grating.

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe but incl waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; incl urinal spreader, flush pipe, grating (if any) and Union for discharge pipe

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with aluminium alloy brackets and guard and railing 60cm long complete all as specified.

S&F in repairs chromium plated brass Peg set of Six fixed with brass screw and wooden /plastic cleats.

S&F in repairs for Continuous (Piano) hinges 30 mm , mild steel, bright finish or electro-galvanised fixed in cupboard/kitchen cabinet as in repair complete all as specified and directed.

Supply and fixing in repairs hasp and staple 100mm size ( ISI Marked), safety type aluminium anodized including bolt to hinge plate, all as specified and directed.

S & F in repairs vitreous china hand wash basin white oval shaped exclusive quality, fixing over granite counter incl PVC waste pipe and waste coupling fixed complete all as specified and directed.

S&F in repairs PTMT waste coupling 32 mm dia, half or full threaded complete

S&F in repairs PTMT waste coupling 40 mm dia, half or full threaded complete

S&F in repairs for PVC waste pipe 32 mm to 40 mm dia size of adequate length (minimum length 60cms) suitable for WHB/Sink with PVC adapter complete all specified and directed

S&F in repairs for 20 mm thick shutter for cupboard/ kitchen cabinate of partical board, solid core and plywood face panels, commercial type on one side and other side is covered with decorative face veneers with lipping/frame to match complete all as directed and specified.

S&F in repairs aluminium anodised fixed type partition wall, partly panelled and partly glazed, made up of 101.6x44.5x1.5 to 1.8 mm thick standard aluminium section incl necessary jointing cleats, glazing clips, rubber packing, aluminium snap beading screws, including glazing with 5mm thick tinted sheet glass (Make : Modi Guard/ Saint Gobain) and panel of 3 mm thick aluminium composite panel with both side decorative choice lamination etc, complete all as specified and directed.

Repair of Chajjas by completly removing old broken plasters or pieces of concrete and dubbing out with cement mortar 1:4 or by cement concrete 1:2:4 (12.5 mm graded aggregate) incl necessary formworks and finally finishing the surface smooth and even w/o using extra cement and applying two coats of cement based paint complete (plan area of chajjas to be measured)

S&F in repair double legged door stopper of aluminium alloy with rubber all as specified and directed by Engr-in-charge.

Repair of aluminium doors by taking down door shutters and then oiling, greesing of door/floor springs, tighting screws and changing ACP sheets or glass if broken, refixing rubber packing if loose or changing with new if required, and refixing the door in same position after complete repair as directed by Engr-in-Charge.

M&L for applying two coat of white wash on plastered or unplasred surfaces of walls of old treated surfaces all as specified including Preparation of old plastered surfaces or unplastered white washed/colour /cement base paint washed surfaces of walls by brooming down or steel wire brushing , scrapping down smoke soots and efflorescence salts ,removing nails and making good complete all as specified

All as per item No above but on ceiling surfaces

M&L for applying one coat of oil bond distemper on old distempered surfaceses of walls of old treated surfaces all as specified including Preparation of old plastered surfaces or unplastered surfaces of walls by brooming down or steel wire brushing , scrapping down smoke soots and efflorescence salts ,removing nails and making good complete all as specified

M&L for applying one coat of cement base paint of old plastered or unplasred surfaces of walls of old treated surfaces all as specified including Preparation of old plastered surfaces or unplastered white washed/colour /cement base paint wasshed surfaces of walls by brooming down or steel wire brushing , scrapping down smoke soots and efflorescence salts ,removing nails and making good complete all as specified

M&L for applying one coat of synthetic enamel paint including preparation of old painted wooden surfaces of any description over 10 cm width or girth all as specified.

M&L for one coat of exterior emulsion paint (weather coat of Berger or equivalent ) over old surfaces of wall incl preparation of surfaces complete all as specified and as directed.

SK Traders Sons