Comprehensive maintenance including joinery, seepage, leakage, sheets, railing at RIMC, Young Road and Mall Road under AGE B/R-II of GE Dehradun.

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M & L rendering 10mm thick in cement mortar 1:3 on fair faces of concrete work even and smooth as in ceiling without using extra cement complete all as specified and directed.

M&L for two coats of distemper oil emulsion over applying of 1 to 1.5 mm thick wall care putty finish wall surface even & smooth by roller including preparation of new surfaces complete all as specified and directed.

M&L for complete removal of existing treatment of walls incl corners and applying two coats of distemper oil emulsion over applying of 1 to 1.5 mm thick wall care putty finish wall surface even & smooth by roller complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with steel wire brush, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper complete all as specified and directed.

M&L for one coat of cement base paint of any tint on already prepared external surface of wall complete all as specified and directed.

M&L for applying one coats of distemper oil emulsion on old surfaces including preparation of surfaces complete all as specified and directed.

M&L for preparation of New surfaces of walls and applying two coats of white wash on ceiling, off sets, pillar, etc complete all as directed by the Engineer-in-Charge.

M&L for preparation of new surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for two coats of exterior grade 1st quality weather coat paints over a coat of alkali resistant priming paint including preparation of new plaster external surfaces of wall etc with scrap wir brush and washing with water complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of primer including preparation on new steel surfaces of any description over 10 cm width or girth complete all as specified.

S & F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified.

M&L for preparation of new wooden surfaces of any description not overwise described, over 10 cm width/girth and applying two coat of synthetic enamel paint any description, over a coat of pink primer, complete all as specified and directed.

M&L for preparation of old painted surfaces of wood of any description over 10 cm width/girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismentling floor hearth or wall tiling including cement motor bedding (But not backing), removing serviceable tiles to stone and rubbish off the premises complete all as specified.

M & L virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tilesnot exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified.

M&L for Durastone heavy duty coloured parking tiles 300mmx300mm x 9-10mm thick exterior grade set and jointed with neat cement slurry and pointed in coloured of white cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified.

M&L non skid / mat finish ceramic colour tiles of size 300 mm x 300 mm and 6-7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x6-7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed.

All as per item No 23 here-in-above but as in skirting over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M&L for Cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

Taking down chowkat with shutter n. exc 1.5 Sqm each (without taking off shutter from frame) complete all as specified and as directed by Engr-in-Charge.

Taking down chowkat with shutter exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from frame) complete all as specified and as directed by Engr-in-Charge.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each and refixing in same opening after necesssary repair complete all as specified.

Taking down shutter only of any description n.exc 1.00 sqm each complete all as specified.

Supply and fix flush shutters moulded 30 mm thick both face is covered with decorative face veneer teak wood/sunmica finished with lipping/frame to match , solid core construction, with block board core and plywood face panels, complete all as specified and as directed.

S & F 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S&F in repair vitreous china half stall urinal flat back of size 465 x 355x 265 mm, white excluding flushing cistern, flush pipe but including grating and union for discharge pipe and 32mm LDPE discharge pipe complete all as specified and directed.

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as shown in SSR Part – II 2010 and as directed by GE/Engineer-in-Charge.

S&F 150 mm long, solid in one piece stainless steel barrel tower bolts gde-204 complete all as specified and directed.

S&F 125mm size solid in one piece stainless steel handles, gde-204 cast D type, fixed in stainless steel screws all as directed complete all as specified and directed by Engr-in-Charge.

S&F 100 mm size stainless steel butt hinges gde-204 and fixed with stainless steel screws, complete all as specified and directed by Engr-in-Charge.

S&F 75 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as directed.

S&F stainless steel sliding door bolts 204 grade, hasp and staple type with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm long complete all as specified and directed.

Hacking out old broken glass ( any thickness , size, quality, or description) from wooden frame glazed with putty or fixed with beads all as specified and directed

M & L sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.

S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

Use and waste for form work to edges of concrete flats, treads, break in floor & roofs n.exec 20 cm wide horizontal or sloping and smilar works complete all as specified.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

S&F TMT MS bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia as specified .

S&f TMT bars 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified.

M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth.

Supply, fixing & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI new fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in replacement rotational moulded polyethylene 500 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and directed.

S&F in replacement rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and directed.

S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified.

S&F in repair vitreous china, white, oval shape wash hand basin, flat size 550 x 400 mm including MS brackets including 12 to 15mm thick prepolished mirror granite fixed on RCC slab 1:11/2:3, 50mm thick with steel reinforcement (paid separately) cutting for and pinning in ends of brackets 32mm (PTMT) waste coupling (hald or full threaded) minimum weight 32 gm-45gms), 15 mm bore CP pillar tap , 25mm dia PVC (LDPE) pipe of pressure 6Kg/cm2 down pipe 75cm long complete all as specified and directed.

S&F in repair PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed.

S&F in repair PVC (SWR) bends of 75 mm dia, any radius complete all as specified and directed.

S&F in repair PVC (SWR) junction single Tee equal or unequal 110 mm dia complete all as specified and directed.

S&F in repair PV C (SWR) junction single Tee equal or unequal 75 mm dia complete all as specified and directed.

M&L in repair PVC (SWR) floor trap, plain with grating including jointed with solvent cement of 75 mm outlet dia complete all as specified and directed.

S & F in repairs 15 mm bib tap CP, cast copper alloy with capstain head screwed down screwed for iron pipe or for brass ferrule fancy type, complete all as specified and directed by Engineer-in-Charge.

S & F in repairs CP angle valve of cast copper alloy screwed down high pressure with capstain head screwed both ends for iron pipe or for unions and fixed 15 mm bore complete all as specified and directed by Engineer-in-Charge.

S & F in repairs CP shower roses with CP Arms, 15mm bore, complete all as specified and directed by Engineer-in-Charge.

S & F in repair 15mm dia Brass CP central hole basin mixer with 450mm braided connection pipe (without pop-up) for mixing hot & cold water, complete all as specified and directed by Engineer-in-Charge.

S & F in repairs, chromium plated steel grating of maximum dia 150mm Complete all as specified and directed by Engineer-in-Charge

S&F in repair bib cock PTMT standard 15 mm dia with capastan head , Make 'Prayag' complete male or female as reqd and as directed by Engineer Incharge

S&F in repair stop cock PTMT standard 15 mm dia with capastan head , complete male or female as reqd and as directed by Engineer Incharge Make Prayag,Ess Ess,Sieko.

S&F in repair Waste fittings 40 mm , brass chromium plated for sinks with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F in repair Waste fittings 32 mm , brass chromium plated for glazed ware sinks, basins etc. ware sinks with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F in repair PVC, white, low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float with & including PVC flush pipe 32 mm bore complete all as specified and directed

S & F in repair PVC Waste Pipe 32 to 40 mm for WHB/Sink up to floor trap and fixed complete all as specified.

S & F in repair MS Rat tail pattern/ helicle doors spring 150 to 200 mm, ordinary springs including roller and roller plate complete all as specified.

Removing the manholes covers and de-watering of septic tank and soakage well of any size and depth by mechanical pumping by plugging inlet as requried,and making the septic tank and soak well fully functional to the entire satisfaction of Engr -In- Charge including carrying the effluent out of MD land using 5000 ltr capacity sewage tanker and re-instating the manholes cover to its original postion complete all as spd and directed by Engr-In Charge

Removing the manholes covers and de-sluding of septic tank and soakage well of any size and depth by mechanical pumping by plugging inlet as requried,and making the septic tank and soak well fully functional to the entire satisfaction of Engr -In- Charge including carrying the effluent out of MD land using 5000 ltr capacity sewage tanker and re-instating the manholes cover to its original postion complete all as spd and directed by Engr-In Charge

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed by Engineer-in-Charge.

M&L for cutting salt-glazed stoneware drain pipe in position, including jointing socket end of new pipe to same with packed spun yarn and cement mortar l:l and pipe in position and blocking up end with cement concrete 1:2:4. type B-l for a depth of at least 30cm from the cut made complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.

Excavation over areas, n exc 1.5 m deep and getting out in any type of soil complete all as specified and directed.

M&L for PCC (1:4:8 ) type D-2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

M&L for PCC (1:4:8 ) type D-2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for200 mm bore pipe complete all as specified and directed.

S&F 150mm internal dia salt glazed stoneware drain pipe Gde 'A', laid in trenches and jointed in cement & sand mortar 1:1, complete all as specified and directed.

S&F 200mm internal dia salt glazed stoneware drain pipe Gde 'A', laid in trenches and jointed in cement & sand mortar 1:1, complete all as specified and directed.

S & F roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel ,hollow sections or flat sections) including distance pieces, cleats etcincluding dismantling of existing old wooden framed / unframed members complete all as specified and directed .

S&F 10 mm thick plate (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmenother connections complete all as specified and directed.

Returning, filling in soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm etc complete all as specified and directed.

Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting poin etc complete all as specified and directed.

M & L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Use and waste for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)complete all as specified and directed.

M & L for RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Forming embankments includingraising (or lowering) earth,watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5m high from base complete all as specified and directed.

M&L for injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified.

S&F in repair aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 50.30x26x1.20mm Chowkhat top & sides size: 50.30x26x1.00mm .Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

Providing & fixing in replacement false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 2mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, all complete at all heights as per direction of Engineer-in-Charge.

Dismantling asbestos cement (corugated or semicorrugated etc) sheets, in roof covering including ridge.

S & F Pre-painted galvantume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls,fixed vwith self tapping screws as specified

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an ecofriedly colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S & F in repair door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S & F in repair smooth mortise door handle and lock on plate from golden locks all our designs are customized finishing as per requirement and themeof the intetriors, It has a Harmonium blend of aesthetics and security and fitting complete all as specified and directed.

S & F in repair bathroom vanity size 1.20 m x 0.60m x 0.80m HDHMR plywood. It is made up with pre laminated board that make this cabinet rust free, water resistance, termite resistance, anti corrosive, and scratchea resistance washbasin for bathroom cabinet, shelf and mirror is designed to enhance the utility and appeal of your bathroom fungal and bacteria resistant for are heavy duty stainless steel hinges for doors and telescopic channels drawers washbasin cabinet grade quality and the for mirror size 0.60 m x 0.90m modiguard and saint gobian mirror complete all as specified and directed.

S&F in replacement 3mm thick ACP (Aluminum composite material) fixed with screw on MS frame work all specified and as directed.by Eng-in-charge Make : Alex or any other equivalent make approved by GE. (Note - MS Frame work not included in this item).

S&F 12 mm thick toughned glass with openable door with itching of approved design including all fittings such as Bottom patch 163x50x31mm , Top patch, over pannel patch, Big -L , Glass door centre type lock, four side connector, Small-L, three side connector, wall fix bracket, glass to glass 180 degree connector, glass to glass 90 degree connector, pivot for Floor door closer, Pivot for top, wall to glass 90 degree connetor, wall mounted over panel patch with pivot, "H" type handle 450 mm long complete all as specified and directed Note: All fittings should be stainless steel 304 grade and approved by Engr-in-charge. Make of glass: modiguard/saint goben or equivalent, make of fittings: hafele, hettich or equivalent

M&L for water proofing treatment on roof slab including picking, sweeping clean and washing down with water to remove dust & providing water proof treatment described as under:- (a) Surface preparation with Asian smart care mortar and GP groute mortar and treating of construction joints, filling of honey combs with polymer modified mortar (Cement: Sand : smart care multipurpose polymer of Asian Paints or equivalent product of Thermax/ Berger ) (b) Cleaning the surface and applying (Resin & Hardner) smart care Epoxy Primer 2k of Make Asian paints or equivalent product of Thermax/ Berger ) on the cleaned surface for bonding of PU magnum with the existing concrete surface. (c) Supplying, providing and applying water proof treatment to Terrace area with Asian Paints Smart care PU magnum, single component highly elastomeric seamless cold applied modified PU coating or equivalent product of Thermax/ Berger) including all necessary surface preparation, coving using smart care multipurpose polymer, water pond test, etc. complete as per manufacture's specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1mm. The coating shall have dual combination of 250% elongation . Execution to be done with authorised applicator of the manufacturer and bank gurantee to be given by the contractor as specified in PS. Work will be executed in smart assurance system

M&L for taking down existing roof treatment of felt etc any thickness or description including cleaning all upto roof slab including removing spoil from site and M&L for providing roof treatment as per the following steps:- (i) Filling cracks of roof slab with approved chemical sealing compound and applying 15 mm thick rendering in CM 1:4 over neat cement slurry @ 3.00 kg/ sqm over cleaned roof surface with use of approved water proofing compound. (ii) Applying a coat of cold applied bituminous primer @ 0.30 kg /sqm followed by APP modified five layer polymeric membrane 3 mm thick, minimum weight 3.60 kg/sqm reinforced with plyster non-woven fabric (weight not less than 150 gms/sqm) manufactured by M/s STP ltd or M/s Texsa India ltd, laid as per the manufacturers instruction with side over lap of 75 mm and end over lap of 100mm and finally finished with super silver sheild @ 0.10 ltr/ sqm. Note :- The work of water proofing treatment shall be got executed through manufacturer or their authorised applicator only.

M&L for PU selent foam, PU coating using chemical for tin shed leakage including cleaning the surface using wire brush etc complete all specified and as per manufacturer instructions.

Demolition of (reinforced) cement concrete in roofs, floors (other than ground floors), beams, chajjas, fascias, fins and similar works. (Reinforcement cut as required to facilitate demolition) and removing of rubbish out side premises as directed by Engr-in-charge.

Anil Kumar Gupta

PAWAN KUMAR

M/s Pradeep Kumar