SPECIAL REPAIRS TO BLDG NO. PH- 02 (OLD BLOCK ) OF YOS MESS AT AFS BIDAR

Amount

Taking down cement plaster on brick or concrete or stone wall, of any description including, racking out joints, hacking for key scrubbing down with water etc. complete all as specified and as directed.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for including removal of debris outside MD land complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc., laid bedded and pointed in any mortar complete all as specified and as directed .

Demolition of brick work, stone / boulder masonry, precast concrete block masonry etc., built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

Pre-cast cement concrete block masonry with solid blocks built in 1:3:6 type-C1 concrete (using 20mm graded stone aggregate), exc. 10cm in width and setting in mortar 1:6 complete all as specified and as directed.

Pre-cast cement concrete block masonry with solid blocks built in 1:3:6 type-C1 concrete (using 20mm graded stone aggregate), not exc. 10cm in width and setting in mortar 1:4 complete all as specified and as directed.

Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement, complete all as specified and as directed.

PCC 25mm thick 1:2:4 type B0 using 12.5 mm graded stone aggregate as in sub base complete all as specified and directed.

Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Glazed coloured ceramic coloured tiles in vertical surfaces 300 X 450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles as in skirting/dado including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

Solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSR and complete all as specified and directed.

Factory made solid Panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for styles and Plain colour sheet PVC for top rails, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail supplied and fixed as per SSR instructions complete all as specified and as directed.

Butt Hinges 100 mm long, extruded aluminium alloy with galvanised mild steel hinge pin anodised, type B-21 complete all as specified and as directed.

Aluminum anodised barrel tower bolts of extruded section 100mm long complete all as specified and as directed.

Aluminum anodised bow handle fabricated type extruded section of 100mm long complete all as specified and as directed.

Mild steel framed work in doors or gates of angle section with gusset plate braces etc complete drilled for fixing of steel sheeting including hooks etc conforming to Fe-290 ( Gde-E-165) complete all as specified and directed.

GI tubing medium grade with necessary fittings fixed to walls and ceiling or laid in floors, 15mm dia bore including taking down old steel tubing complete all as specified and as directed.

GI tubing medium grade with necessary fittings fixed to walls and ceiling or laid in floors, 20mm dia bore including taking down old steel tubing complete all as specified and as directed.

GI tubing medium grade with necessary fittings fixed to walls and ceiling or laid in floors, 25mm dia bore including taking down old steel tubing complete all as specified and as directed.

S&F in repairs vitreous china ware wash hand basin, white, flat back of size 550 mm X 400 mm including 32 mm dia PTMTwaste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets duly painted, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe, PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan [Pedestal pattern], white [excluding flushing cistern and flush pipe] including plastic water closet seat back closed pattern with recessed bottom and connection to drain or out going pipe complete all as specified and as directed.

S&F in repairs PVC Low level Flushing cistern 10 litres capacity , white, with inlet ball valve, float and handle including brackets and PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specified and as directed.

S&F in repairs 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed.

S&F in repairs 15mm bore chromium plated cast copper alloy bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs 15mm dia Bib tap (2 in 1 type) of brass, glossy finish complete all as specified and as directed.

S&F in repairs Health Faucet with 1.5 m tube & hook of brass, glossy finish complete all as specified and as directed.

S&F in repairs Stop valves 15mm bore, cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwd down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs 15mm bore angle / stop cock of chromium plated, fancy type screwd down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy fancy type with capstan heads, chromium plated screw down high pressure, screwed for iron pipe complete all as specified and as directed.

S&F in repairs brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe of 15mm bore complete all as specified and as directed.

S&F in repairs tubular towel rail 20mm dia D type 60cm long between flanges chromium plated complete all as specified and as directed.

S&F in repairs Glass shelf assembly consisting of 5.5 mm thick glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long and over all size of shelf not less than 600X1200mm complete all as specified and directed.

S&F in repairs Soap dish, brass chromium plated of suitable size, first quality, and fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F Rotational moulded polyethene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball (Minimum weight 210 gms), 20mm tank nipple and 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe including dismantling of existing water tank complete all as specified and as directed.

S&F Rotational moulded polyethene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball (Minimum weight 210 gms), 20mm tank nipple and 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe including dismantling of existing water tank complete all as specified and as directed.

PVC (SWR) pipes 110mm bore single socketed, in any length with rubber rings joints, fixed to walls , as in rain water pipes including taking down existing pipe complete all as specified.

S&F in repairs PVC (SWR) bends 110mm dia any radius with access door complete all as specified and as directed.

Taking down/removing of existing water proofing felt on roof surfaces and wall surfaces complete all as specified and as directed.

Plain cement concrete 1:2:4 type B0 by using 12.5 mm graded stone aggregate, average 40mm thickness as required at site including necessary form work for as in padding concrete on roof / chajja complete all as specified and as directed.

Rendering 10 mm thick on concrete roof surfaces in CM 1:3, mixed with water proofing compound finished even and fair with out using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately.

Supply only integral water proofing compound

Water proofing treatment on horizontal or vertical surfaces with provision of oil bound bitumen primer @ 0.20 Kg / Sqm and providing 4 mm thick, APP modified water proofing membrane weighing not less than 4.0 Kg/Sqm reinforced with non-oven polyster matt weighing not less than 160 gm /Sqm, applying a coat of blown grade hot bitumen 85/25 or 90/15 @ 1.20 Kg / Sqm and finished with solar reflective bituminous aluminium paint @ 100 gm /Sqm complete all as specified and as directed.

Complete removal of existing treatment including preparation of wall surfaces, applying 1mm thick wall care putty on old decorated of surfaces and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed .

Preparation of new plastered surfaces of wall , applying 1mm thick wall care putty and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed .

Complete removal of existing treatment including preparation of ceiling surfaces and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed .

Complete removal of existing treatment on wall / ceiling surfaces and applying two or more coat of Acrylic smooth exterior paint of approved shade @ 1.67 ltr / 10 sqm over and including priming coat of exterior primer 2 2.2 kg / 10 sqm complete all as specified and as directed .

Preparation of new plastered surfaces of wall and applying two or more coat of Acrylic smooth exterior paint of approved shade @ 1.67 ltr / 10 sqm over and including priming coat of exterior primer 2 2.2 kg / 10 sqm complete all as specified and as directed .

Preparation of old painted surfaces of wood and wood based materials of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint ( first quality ) complete all as specified and as directed.

Preparation of new Steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Preparation of old painted steel and iron surfaces of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint ( first quality ) complete all as specified and as directed.

AMAR CONSTRUCTION

Mr Madhusudhan Kotarki

OM INFRA

Siddique constructions