Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.2 LAccepted-AOC PUTHEN PARAMBIL HOUSE PATHIRICKAL P O PATHANAPURAM KOLLAM | KOLLAM | KERALA | 689694 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹8.5 L+₹29,427.21 (3.60%)Rejected-AOC | L2 | Rejected-AOC 2nd lowest |
Tender Value
₹8.5 L
EMD Value
₹21,175
Closing Date
6 Oct 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Assistant Executive Engineer
Assistant Executive Engineer, PWD, Building Subdivision Kottarakkara
Disaster Management- Providing facilities for Emergency Operation Center for Kottarakara Taluk at Mini Civil Station Kottarakara work-
2023_PWD_592365_2
11/ET/AEE/BL/KTR/99017/2023-24
Open Tender
Civil Works - Buildings
Item Rate
60 days
Kottarakkara
Please refer Tender documents.
10 documents required · 10 mandatory
₹1,870
Yes
₹21,175
Yes
7 Nov 2023
20 Sept 2023
9 Oct 2023
20 Sept 2023
6 Oct 2023
20 Sept 2023
Amount
Detailed Estimate
21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness
9.83:Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
21.13:Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete
21.16.1:Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-Charge.Anodized (AC 15 ) aluminium
OD62100/2021-2022:Teak wood framed Wooden chair seat and back with Good quality Cushion with high grade furniture fabric shall be used to finish, for all rooms (writing chair)duIy finished of Teak wood frame as per the design provided. Wood surface shall be sanded smoothly with two coats of sealer applied and finished with two coats of polyurethane / melamine ( glossy/matt finish) in teak finish.
OD4185/2023-2024:Supplying of Rotatable type metal type chair with arms and having synthetic leather with cushion.
OD62107/2021-2022:Providing and fixing 12 mm Second class teak wood planks, planed lap jointed and wire nailed to frames including all cost of materials labour charges etc complete
OD38455/2021-2022:Supplying and fixing arm visitors chair
OD38451/2021-2022:Providing and Supplying MDF wooden Table 90x60x75cm including conveyance and labour charges etc
OD38454/2021-2022:Providing and supplying Steel Cabinet 120x60x180cm
OD4189/2023-2024:Supplying and fixing 10 mm toughened glass for table top
OD39202/2021-2022:Supplying and laying cushion chairs with steel handles including cost conveyance etc
OD39207/2021-2022:Supplying and fixing curtain with rod , fabric, clamps, decorative end piece, hooks etc. including cost, conveyance, labour charges etc.
OD39208/2021-2022:Supply and installation of Roller blind with fabric (NL-404) including material, conveyance, labour etc. complete (OD)
12.45.1:Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1
OD62141/2021-2022:Providing and fixing stainless steel D bracket with necessary accessories and screws etc. complete.
OD62142/2021-2022:Providing and fixing Thomson Multi wood board or equivalent make paneling 18 mm thick, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)as per the direction of site Engineer-in-charge.
OD62143/2021-2022:Providing and fixing glazing in wood shutters , partitions etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. With float glass panes of 5.5 mm thickness.
OD62208/2021-2022:Providing and Fixing Second class teak wood frame work consisting of battens of required size fixed with rawlplug & drilling necessary holes and including priming coat etc complete
Y GEORGE KUTTY
Bidder Name
Y GEORGE KUTTY
Baby Thomaskutty
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_901658.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .