32/MWEEE-I/2021-22/TC Item No.1

Amount

SECTION - I (Electrical) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / ressed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-'C'

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-'C'

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required 3 Module (100mmX75mm)

-do- 6 Module (200mmX75mm)

-do- 8 Module (125mmX125mm)

-do- 12 Module (200mmX150mm)

Installation, testing and commissioning of pre-wired, fitting , complete with all accessories and . directly on ceilingl, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 kV grade as required. 4 X 10 sq. mm (25 mm)

-do- 3 x 2.5 Sqmm

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed Steel conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

-do- 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

-do- 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

-do- 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

-do- 2 X 10 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing 6Way Double Door(4+18), horizontal type three pole nd neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (25mm)

Supplying and fixing 5amps,to 32 amps rating, 240 volts, "C" curve miniature circuit breaker suitable for inductive load of following pole in the existing MCB DB complete with connection testing and commissioning etc, as required. Single pole

-do- Triple pole and neutral

Supply and fixing following rating, double pole, 240 volt, isolator in the existing MCB DB complete with connection, testing and commissioning etc, as required. (A) 40 Amp.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Laying of one number pvc insulated and PVC sheathed/ XLPE power cable of 1.1 kv grade of following size in the existing surface as required Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying of one number pvc insulated and PVC sheathed/ XLPE power cable of 1.1kv grade of following size above in the existing masonry open duct as required. Upto 35 sqmm

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ sub main wiring/ cable as required.

Supply of PVC insulated PVC sheathed Copper . conductor armored cable for working voltage up to 1.1 kv confirming to IS 1554(part-1) of f size (3x2.5 Sqmm)

Supply of 12'(300mm)sweep 900 rpm decorative fresh air fan in Plastic body complete with shutter etc as required. ISI marked.

Fabrication, supply, installation, testing & commissioning of 15 cm to 30 cm deep cubical panel type panel board made out of 1.6 mm thick ms sheet equipped with neutral link Aluminum bus bar 400 amp capacity suitable in all compartment accommodate accessories/ switch gear including interconnection with solid alum. bolt of all switch gear termination on both side incoming/ outgoing complete two coats of approved quality color of enameled paint, earthing etc as reqd.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagneticrelease and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 125 A, 16 KA,TPMCCB

-do- 63 Amp, Four Pole Isolator

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm OD

Supply of PVC insulated PVC sheathed Al. conductor armored cable for working voltage up to 1.1 kv confirming to IS 1554(part-1) of following size 4 X 10sqm

Supply, Installation, Testing & Commissioning of of Dali dimmable 35W LED track light with beam angle 24deg distribution - , CCT of 3000K, CRI>90, SDCM≤3. Pane angle: 0-320; tilt angle : 0-90. Input voltage AC 220~240V, 50/60Hz along with Dali VLC driver and Dali track. Service life 50,000hrs@L70B50@Ta25°C. Available in black 9011. CCC/CB/CE/SAA/BIS certified. Similar to Philips ST700T LED30 930PC PSD 1C BK MB

Supply, Installation, Testing & Commissioning of ceiling mounted/ suspended LED luminaire with Light-diffusing white fabric and extruded aluminium frame to create a white light ceiling surface for daylight experience. Single panel luminaire dimension shall not be greater than 1850mm in width and 3650mm in length with a combination of LED modules sized, 600 x 600 mm or 300 x 300 mm. Ceiling panel total height should not exceed 120 mm. The light output should be at least 2900lm/sq mt at 4000K. The CRI of the luminaire should be not less than 90 and color consistency within a 2-step MacAdam ellipse to provide direct view illumination, R9>55. The luminaire should have life of 50k hrs for L70. Input voltage of 100 to 277 VAC, auto-ranging, 50/60 Hz. CE certified luminaire. Both luminaire and driver should be from the same OEM. Similar to Philips/Signify Onespace gen2. (276 Watt/ 41 watt/Sqm)

Supply, Installation, Testing & Commissioning of LED intelligent floodlighting luminaire with Die-cast aluminium, dark grey powder-coated finish, system wattage not exceeding 36W and system lumen output of not less than 2000lm all channels on with system efficacy of 55lm/W. Fixture shall have a CCT of 3000K and CRI>80, with a choice of architectural floodlighting optics with choice of beam angles of 8°, 15°,30°,40° and 60°beam angles. Fixture dimension shall be no larger than 258 mm x 210 mm 157 mm and weigh no more than 4.7 kgs. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 100 – 277 VAC. Fixtures shall be equipped with the latest technologies to increase the life of each fixture. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection & mechanical Impact Resistance Rating of IK =08. Manufacturer shall provide complete optical performance, polar diagrams, and photometric data in various formats including IES file format in accordance with IES LM-79-08. .Manufacture Should provide LM-80 Report of Led chip . Work should should be complete with necessary factory made weather proof leader cable, lenses and external power cum data supply [if any], wiring, junction boxes, provisioning of power and data cabling etc. cat ref BVP322 18LED 30K 220V 15

Supply, Installation, Testing and Commissioning of 1000mm Length LED linear grazing luminaire low power with housing material of extruded aluminium, dark grey anodized finish, system wattage not exceeding 50W and system lumen output of not less than 2400 lumens.Fixture shall have a CCT of 3000K & CRI>80, be available with architectural optics with choice of beam angles of Elliptical 16x35°, 17°, 30°, 40°. Fixture shall operate in a temperature range of 0°C to 40°C. Fixture shall have auto-ranging input voltage for 100-240 VAC. Fixture dimension shall be not larger than 1000 mm x 105 mmX45 mm and weight not more than 3.5 kgs. Luminaire should have SDCM <4 (White ) & Lifetime should be at least 50,000 burning hours at L70 with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. Manufacturer shall provide complete optical performance, polar diagrams, and photometric data in various formats including IES file format in accordance with IES LM-79-08. LED fixture shall be UL listed or UL/cUL classified, FCC Class A, CE certified, PSE marked, RoHS compliant, and C-Tick certified. Work should should be complete with necessary factory made weather proof leader cable, lenses and external power cum data supply [if any], wiring, junction boxes, provisioning of power and data cabling etc. Philips cat ref BCP383 24LED 30K 220V A2 L100

Supply, Installation, Testing & Commissioning of LED indoor surface/suspended COB downlighter made of extruded Aluminium housing suitable for general lighting. The luminaire should have CRI > 80 and CCT of 3000K. The luminaire shall be compliant with IP20 & IK02 classification.The fixture should have a minimum system efficacy of 100 lumen/Watt and a minimum system lumen output of 1000 lumens and maximum system wattage of 10 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 30k burning hours @ design ambient temp 35 deg C. The electronic driver used shall have a power factor >0.9 , THD <10%. he fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Housing color code Black-RAL9005; Similar to PHILIPS Archspace SP320

Supply, Installation, Testing & Commissioning of recessed LED steplight, made of Aluminium housing in Anthracite grey Colour. Luminaire should be with minimum system lumen output of 85lm and maximum system wattage of 3W. The luminaire should have CCT of 3000K. Luminaire dimension shall be not larger than 115x84x44mm. Similar To Philips LED steplight Model No. 34152

Supply, Installation, Testing & Commissioning of decorative heritage LED wall light, made of synthetic, metal in Black Colour and suitable for outdoor areas. The luminaire shall have a lamp base for E27 bulb with maximum 1x42W. Luminaire dimension shall be not larger than 207x250x266 mm. Similar To Philips Model No. 1738130

Supply, Installation, Testing & Commissioning of Deep recessed LED COB Downlighter made of aluminium housing, fixture should have minimum efficacy at System level (Not Chip Level) >=80lumens/watt with Minimum system Lumens 960 with maximum system wattage of12 W. Should have a focused 36 degree beam angle and minimalistic outer trim. Life of fixture : 35000 burning Hrs., CCT of 6500K , CRI >80, an operating Voltage Range of 160 - 360 VAC and surge up to 2KV , The Luminaire should be BIS compliant. Similar to Philips Deco COB.

Supply, Installation, Testing and Commissioning of LED intelligent floodlighting luminaire with Die-cast aluminium, dark grey powder-coated finish, system wattage not exceeding 50W and system lumen output of not less than 3200lm all channels on with minimum system efficacy of 60lm/W. Fixture shall have a CCT of 3000K and CRI>80, with a choice of architectural floodlighting optics with choice of beam angles of 8°, 15°,30°,40° and 60°beam angles. Fixture dimension shall be no larger than 315 mm x 262 mm 169 mm and weigh no more than 7 kgs. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 100 – 277 VAC. Fixtures shall be equipped with the latest technologies to increase the life of each fixture. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection & mechanical Impact Resistance Rating of IK =08.This fixture is best suitable for Colorful Dynamic facade, Programmable, IoT based solutions, can be controlled from centrally. Manufacturer shall provide complete optical performance, polar diagrams, and photometric data in various formats including IES file format in accordance with IES LM-79-08. .Manufacture Should provide LM-80 Report of Led chip . Work should should be complete with necessary factory made weather proof leader cable, lenses and external power cum data supply [if any], wiring, junction boxes, provisioning of power and data cabling etc. cat ref BVP323 24LED 30K 220V 8

Supply, Installation, Testing and Commissioning of 1000mm Length LED linear grazing luminaire low power with housing material of extruded aluminium, dark grey anodized finish, system wattage not exceeding 50W and system lumen output of not less than 2400 lumens.Fixture shall have a CCT of 3000K & CRI>80, available with architectural optics with choice of beam angles of Elliptical 16x35°, 17°, 30°, 40°. Fixture shall operate in a temperature range of 0°C to 40°C. Fixture shall have auto-ranging input voltage for 100-240 VAC. Fixture dimension shall be not larger than 1000 mm x 105 mmX45 mm and weight not more than 3.5 kgs. Luminaire should have SDCM <4 (White ) & Lifetime should be at least 50,000 burning hours at L70 with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. Manufacturer shall provide complete optical performance, polar diagrams, and photometric data in various formats including IES file format in accordance with IES LM-79-08. LED fixture shall be UL listed or UL/cUL classified, FCC Class A, CE certified, PSE marked, RoHS compliant, and C-Tick certified. Work should should be complete with necessary factory made weather proof leader cable, lenses and external power cum data supply [if any], wiring, junction boxes, provisioning of power and data cabling etc. Philips cat ref BCP383 24LED 30K 220V A2 L100

Supply, Installation, Testing and Commissioning of 1000mm Length LED linear grazing luminaire low power with housing material of extruded aluminium, dark grey anodized finish, system wattage not exceeding 15W and system lumen output of not less than 950 lumens.Fixture shall have a CCT of 3000K & CRI>80, available with architectural optics with choice of beam angles of Elliptical 20x30°, 30°, 45°, 60°. Fixture shall operate in a temperature range of 0°C to 50°C. Fixture shall have input voltage of 24 VDC. Fixture dimension shall be not larger than 1000 mm x 25.4 mmX71 mm and weight not more than 0.86 kgs. Luminaire should have SDCM <4 (White ) & Lifetime should be at least 50,000 burning hours at L70 with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. Manufacturer shall provide complete optical performance, polar diagrams, and photometric data in various formats including IES file format in accordance with IES LM-79-08. LED fixture shall be UL listed or UL/cUL classified, FCC Class A, CE certified, PSE marked, RoHS compliant, and C-Tick certified. Work should should be complete with necessary factory made weather proof leader cable, lenses and external power cum data supply [if any], wiring, junction boxes, provisioning of power and data cabling etc. Philips cat ref BCP386 60LED 30K 24V A11 L100

Supply, Installation, Testing and Commissioning of 500mm Length LED linear grazing luminaire low power with housing material of extruded aluminium, dark grey anodized finish, system wattage not exceeding 27W and system lumen output of not less than 1200 lumens.Fixture shall have a CCT of 3000K & CRI>80, available with architectural optics with choice of beam angles of Elliptical 16x35°, 17°, 30°, 40°. Fixture shall operate in a temperature range of 0°C to 40°C. Fixture shall have auto-ranging input voltage for 100-240 VAC. Fixture dimension shall be not larger than 500 mm x 105 mmX45 mm and weight not more than 2 kgs. Luminaire should have SDCM <4 (White ) & Lifetime should be at least 50,000 burning hours at L70 with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. Manufacturer shall provide complete optical performance, polar diagrams, and photometric data in various formats including IES file format in accordance with IES LM-79-08. LED fixture shall be UL listed or UL/cUL classified, FCC Class A, CE certified, PSE marked, RoHS compliant, and C-Tick certified. Work should should be complete with necessary factory made weather proof leader cable, lenses and external power cum data supply [if any], wiring, junction boxes, provisioning of power and data cabling etc. Philips cat ref BCP383 12LED 30K 220V A2 L50

Supply, Installation, Testing and Commissioning of LED based Flood light, housing made up of pressure die cast aluminum Alloy with effective thermal management,sturdiness and embossed brand name/logo name of manufacturer. The fixture should have a minimum system efficacy of 100 lumen/Watt and a minimum system lumen output of 3500 lumens and maximum system wattage of 35 Watts.The fixture shall have a CRI of minimum 70 and CCT - 3000K. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP66 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK >=05.The fixture driver should have an operating voltage range of 140-270 V, surge protection of >=3KV, PF >0.9 and THD<20%. The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Similar to Philips CAT No. - BVP 120

Supply, Installation, Testing and Commissioning of LED Strip light with IP68 & IK06 protection. Product should have sealed with anti-UV polyurethane without color shifting and anti-UV aging.It should have lumen output of 1100Lm/Mtr. with a CCT of 3000K , Product width should not exceed 10mm. It should have better color consistency for visual comfort(SDCM<5) & CRI>80, supply of 24VDC, Class III for safety use Long lifespan 30K hrs. L70B50@35℃ . Product should have accessories of Lead cable (1000mm) with suitable numbers of clip,screw,end caps ,mounting tracks and waterproof connector.The Product should be BIS certified & self declaration of CE certification, Restriction of hazardous substances- Compliant with (RoHS) EN 60598-1: 2015+ A1:2018; Low Voltage Directive (LVD) - 2014/35/EU; EN 60598-2-5:2015; EN 62471: 2008; EN 62493:2015+IEC62778.Cat ref- BGC301 LED 1100lm 3000K L5000 57Watt/5mtr, 1100Lm/m,10mm wide Similar to Philips UNILINEAR FLEX911401719722)

Façade Supporting ZXP399 Lead 2P DC cable 2m (10 pcs)

ZXP399 Jump 2P DC cable 2m (10 pcs)

ZXP399 endcap male connector (20 pcs)

ZXP399 endcap female connector (20 pcs)

3rd party - IP65 100W Driver

ZGC 301 IP connector (10 bags)

3rd party Al profile with clear cover, base clip & end caps as per site 1m

3rd party- IP65 65W driver

Indoor Controls DDBC300-D - 12NC 913703031109

DACM-V3 - 12NC 913703970707

PATPE-WW-X - 12NC 913703433007

DDNP-1501 - 12NC 913703090309

DDNG-485 - 12NC 913703081209

PDEG - 12NC 913703013809

DTK622-USB-J - 12NC 913703090209

SECTION - II (UPS) UPS for back up emergency Supply Supply Assembly Erection testing & commissioning of UPS bank of suitable (N + 1) mode in standby mode. The UPS system shall be suitable for operation on 415 + 10%, 3 phase, 50 + 5% Hz AC supply. The system shall be complete with lead acid type sealed maintenance free batteries suitable to provide a backup of 30 minutes at full load. The interconnection between the UPS to battery and back to UPS; from UPS control panel to individual UPS input connector, from UPS to output panel connector etc. shall be included. The complete system shall be mounted on the expandable rail rack as required at site. The technical details of the UPS shall be as per technical specification. UPS system with 30 minutes battery back-up. 2KVA Off Line Type

SECTION - III (Airconditioning) Supply, Installation, testing and commissioning of - 2 TR Hi Wall type split air-conditioning unit suitable to operate from 230±10% volt, 50 Hz, 1 phase power supply, with air-cooled evaporator with copper coil, fan, and fan motor, air-cooled condenser with hermetically sealed rotary/ scroll compressor, condenser copper coil, propeller fans controls, control panel, Including control wiring, necessary power cable, cordless remote, M.S. frame duly painted to locate Outdoor Unit etc. The Unit should be at least 5 Star rated . . The capacity guarantee should be ensured by the manufacturer. Automatic voltage stabilizers ISI marked with inbuilt time delay relay to be provided.

Supply, Installation, testing and commissioning of - 1.5 TR Hi Wall type split air-conditioning unit suitable to operate from 230±10% volt, 50 Hz, 1 phase power supply, with air-cooled evaporator with copper coil, fan, and fan motor, air-cooled condenser with hermetically sealed rotary/ scroll compressor, condenser copper coil, propeller fans controls, control panel, Including control wiring, necessary power cable, cordless remote, M.S. frame duly painted to locate Outdoor Unit etc. The Unit should be at least 5 Star rated . . The capacity guarantee should be ensured by the manufacturer. Automatic voltage stabilizers ISI marked with inbuilt time delay relay to be provided.

Providing and fixing of copper soft/hard refrigerant piping (Circuit length) along with control cabling and earthing should be insulated with 13 mm thick pipe section of nitrile rubber.

Providing & fixing of uPVC Pipe complete with fittings, supports as per specifications and duly insulated with 9 mm thick pipe section of nitrile rubber as per direction of Engineer-In-Charge & specifications enclosed as reqd. (For Split Units.)

MS stand 25x25x5 for Outdoor unit along with Bird screen fixed on the TOP

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4 + 24), Double door

Supply and laying of following size of PVC insulated PVC sheathed Al conductor armoured cable of b1.1 KV grade on surface etc. as reqd 3.5 C x 50 Sqmm

Supply of PVC insulated PVC sheathed Copper . conductor armored cable for working voltage up to 1.1 kv confirming to IS 1554(part-1) of f size 3Cx2.5 Sqmm

-do- 3Cx1.5 Sqmm

Laying of one number pvc insulated and PVC sheathed/ XLPE power cable of 1.1 kv grade of following size in the existing surface as required Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying of one number pvc insulated and PVC sheathed/ XLPE power cable of 1.1kv grade of following size above in the existing masonry open duct as required. Upto 35 sqmm

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 kV grade as required. 4 X 50 sq. mm (35 mm)

Supplying and fixing 5amps,to 32 amps rating, 240 volts, "C" curve miniature circuit breaker suitable for inductive load of following pole in the existing MCB DB complete with connection testing and commissioning etc, as required. 6 amps. to 32 amps. ratings , TP MCB, “C” curve, 10 KA breaking capacity

SECTION - IV Fire Fighting Providing laying testing commissioning 'C ' class heavy duty MS pipeconfiring to IS 3589 and 1239 including fittinglike elbow, tee, flanges,tapers,nut bolts,gaskets,hangeretc. Fixing the pipe on wall/ceiling with fastner and clamps when laid directly on roof and painting with two or more coats od synthetic enamal paint of required shade complete as reqd. 150mm

Supplying and fixing single headed internal hydrant valve Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conformingto IS 5290 (Type -A) PN rating 1.6 with blank Gunmetal/Stainless Steel cap and chain as required

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post officered, conforming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS:1258512585 20 mm nominal internal dia gun metal globe valve & nozzleDrum and brackets for fixing the equipmets on wall Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required

NON RISING cast Iron double flange SLUICE Valve as per ISI/14846 PN 1.6 rating complete with Bronze body & wedge Stainless Steel spindle, Gland packing, Rubber gasket 150mm DIA Sluice Valve

100mm DIA Sluice Valve

NON RETURN VALVE cast Iron double flange as per IS/5312 PN 1.6 rating complete with Bronze body & wedge Stainless Steel spindle, Gland packing, Rubber gasket 100mm NRV

SITC of electric deiven terrece pump suitable for automatic operation and consisting of following :- Horizontal type,multistage ,centrifugal, split casing pump of cast ironbody and bronze impeller with stainless steel shaft, mechanical seal confirming to IS-1520, 15HP SQ cage induction motor TEFC type suitable for operation on 415V ,3 Phase 50 Hz AC ,with confirming to IP 55 class of protectionfor enclosure ,horizontal foot mounted type with class F insulation,bolts as reqd.with anti vibration pads complete in all respects as reqd. 900 LPM at 35 mtrs head

Supply and fixing of hose cabinet of size 30"x24"x10" (NS) made of 2mm thick MS sheet with 6mm glazed door including necessary locking arrangements suitable to accommodate external hydrant with sluice valve 2 Nos -15 Mts long hose pipe 1Nos-branch pipe,mounted on wall duly painted with post office red externally and white internally with synthetic enmalpaint complete in all respect as reqd.

Providing ,Installation,testing and commissioning 25mm dia gun metal valve

Providing and fixing in position the industrial type pressure gauges with gun metal/ brass valves complete as required

Providing and fixing pressure switch in MS pipe line includingconnectionetc. As reqd

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required 2 way-100 mm dia M.S. Pipe

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required

Fabrication,supplying,installation and commissioning of wall mounted outdoor /canopy type duly compartmentalized cubical panel board,dust and vermin proof made of 2 mm thick CRCA steel hinged locking arrangement,powder coated in approved shade ,suitable for operation of 415V,3 Ph,50 Hz AC supply with MCB 32 A ,TP 25KA-1 No,Contactor-16 Amps,Overload Relay,Push Button, indicating lights ,Voltmeter 0-500V, 0-30A Ampere meter,Auto/Manual Switch with 15 HP fully automatic operations complete as reqd.

Supply and fixing of signage on alluminium sheet 2.0 mm ( +-10%) fixing on wall /ceiling complete in all repect.

Providing and fixing of ABC Powder type Fire Extinguisher of 6 KGs capacity complete with ISI Mark, fixing on wall as reqd.

Providing and fixing 4.5 KG CO2 type Fire Extinguisher squeeze grip Type, trolly wheek as well as mounting type complete with ISI mark including fixing arrangement etc as reqd

Supply and laying of following size of PVC insulated PVC sheathed Al conductor armoured cable of b1.1 KV grade on surface etc. as reqd 4Cx 10 Sqmm

Supply and laying of following size of PVC insulated PVC sheathed CUconductor UN -armoured flexible cable of b1.1 KV grade on surface etc. as reqd 2C x 1 Sqmm

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.

Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required ( 6 - Zones)

ACE ENGINEERS BUREAU