PROVN OF 01 X WC AND 02 X URINAL AT OTM ACCN AND HARDSTANDING NEAR BLDG NO P-31,32 AND 33A OF 91 INF BDE SIGNAL COY, CONSTRN OF OFFRS TOILET AT 260 FD WKSP COY EME, ADDN/ALTN TO STORE ROOM OF P 260 (OFFRS MESS) AND PROVN OF 01 X CAR PARKING SHED WITH

Amount

M&L for surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil all as specified and directed

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for fdn and steps and getting out in hard/dense soil all as specified and directed

M&L Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed

Returning filling in including spreading, leveling, watering well ramming in layers not exc 25cm thick using excavated soil all as specified and directed

M&L Walling of random rubble coursed well bounded bedded out solidly hearted built in CM 1:6 all as spd and directed.

Sand filling/cushioning under floors or in foundations including watering and consolidation all as specified and directed

M&L Plain cement concrete 1:3:6 Type C2 (using 40 mm graded stone aggregate) as in sub base in 100mm thick all as specified.

M&L Plain cement concrete 1:4:8 Type D-2, using 40 mm graded stone aggregate as in foundation all as specified and directed

M&L for machine pressed precast concrete interlocking coloured paver block any shape and size confirming to IS 15658-2006 of 60mm thickness , M-35 Grade with grey cement and pigment all as specified and directed

M&L for PCC type B1 1:2:4 ( 20 mm graded aggregate in kerbs or mud stops rounded or chamfered edges etc complete all as specified and directed

Demolition of brick work, PCC block built in cement mortar and removing the debris/rubbish to a distance n.exc 100m all as specified and directed

M &L Pre Cast Cement concrete block masonry type C1, 1:3:6 (Using 20 mm grated aggregate ) with solid block exc 10 cm in width and setting in CM (1:6) all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base of floor all as specified and directed

M&L for cement concrete 1:2:4 type B1, (20mm graded Aggregate), 40 mm thick. , finished even and smooth using extra cement all as specified and directed

supply only Liquid water proofing compound

M&L for Mild steel bars 10mm TMT bar dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clips quality conforming to TMT bars all as specified and directed

All as per item no 16 here-in-before but 5mm dia and over upto and including 8mm dia

All as per item no 16 here-in-before but 5mm dia and over upto including 10mm dia stirup spacers and binders

M&L Form work to sides of concrete foundations, footings, bases of columns, raft, and raft beaams sides and soffits of foundation and plinth beams and similar work flat fair finished surfaces etc all as specified and directed

M&L for Form work to sides of pillars, posts, struts, piers, columns and stanchions all as specified and directed

Form work to soffit of suspended slab such as roof slab, floor slabs landing and similar work not exceeding 200 mm thick horizontal or slopping all as specified and directed

Form work to sides and soffit of floor or roof beams, ,beam haunching, lintel, beam, shelves including supports overhangs etc all as specified and directed

M&L for RCC 1:2:4 type B1 (20mm graded aggregate) nominal mix as in foundation, including rafts footing , plinth beams, base for columns etc all as specified and directed

RCC 1:2:4 type B1 (20mm graded aggregate) nominal mix as in columns, pillars, etc all as specified and directed

RCC 1:2:4 type B1 (20mm graded aggregate) nominal mix as in lintel beam and similar work etc all as specified and directed

M&L For reinforced cement concrete type B1 1:2:4 ( 20 mm graded aggregate) Slab supported on walls, beam and columns in floor, roofs, slabs and in shelves and the like etc all as specified and directed

M&L RCC lintels 1:2:4 type B1(20 mm graded stone agg) upto 1.5m clear span cills steps etc all as specified and directed

M&L Providing precast cement concrete louvers and jallies, 65 mm thick (measured solid), including all moulding, set in cement mortor 1:4 type B-0 1:2:4 (12.5 mm gradedaggregate), (upto four storey building) all as specified and directed by Engr-in-charge.

M&L for Rendering 5 mm thick cement plaster on ceiling in cement mortar 1:3, finished even and smooth without using extra cement all as specified and directed

M&L for 5mm thick rendering in cement mortar 1:4 mixed with water proofing compound over 10mm thick rendering in CM 1:6 on fair faces of concrete surfaces finished fair and smooth without using extra cement for external walls all as specified and directed

Rendering 5 mm thick in cement mortar 1:3 on top of roof slabs mixed with water proofing liquid as per manufacturers instructions, out of make : As approved by GE, finished even and fair complete all as specified and as directed.

M&L for 10mm thick rendering in cement mortar 1:6 on fair faces of concrete surfaces finished fair and smooth without using extra cement for internal walls all as specified and directed

M&L for Rendering 10 mm thick cement plaster on fair faces of brick work/concrete in cement mortar 1:4, finished even and smooth without using extra cement all as specified and directed

Rendering 10mm thick in cement plaster 1:4 on brick wall surfaces for fixing tiles all as specified and as directed.

M&L for Applying two coats of acrylic exterior emulsion water proofing painting over a coat of primer including prepartion of new surfaces of wall (up to four storey bldg) as per manufactures instructions ) all as specified and directed

M&L for applying two coats of oil bound distemper on preparation of undecorated surfaces on walls complete all as specified

M&L for 20mm thick damp proof course to horizontal or vertical surfaces including necessary formwork in cement mortar 1:2 all as specified and directed

Taking down of cement plaster incl hacking out of joints, hacking for key, scrubbing down with water etc all as specified and directed

Plain cement concrete, 1:1.5:3 (Nominal mix), type B-0 (Using 12.5mm graded stone aggregates) as in filling gape of wall complete all as specified and as directed by Engr-in-charge.

M&L for 15 mm thick screed bed or bedding a layer in CM 1:4 for laying floor finishes all as specified and directed

M&L for non skid ceremic coloured tiles 7 to 8 mm thick (square/Rectangular ) area of each tiles exceeding 0.06 Sqm but not exceedng 0.11 sqm in floors etc .set and jointed neat cement slurry and pointed with colour cement to match all as specified and directed

M&L for non skid ceremic coloured tiles 7 to 8 mm thick (square/Rectangular ) area of each tiles exceeding 0.11 Sqm but not exceedng 0.18 sqm in floors etc .set and jointed neat cement slurry and pointed with colour cement to match all as specified and directed

M&L for glazed ceremic coloured tiles of size 450x300x7mm thick as in skirting/dados set and jointed in neat cement slurry and pointed with coloured cement to match, non skid joint free tiles all as specified and directed

M&L Hardcore guage exc 63 mm n.exc. 100 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rolled / rammed to a true surface.Brocken stone or Boulders

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in floor / plinth protection including finished even and smooth without using extra cement all as specified and directed

M&L for rendering 15mm thick on external surfaces of fair faces of brick work or concrete surface in cement plaster 1:4. finished even and smooth without using extra cement all as specified and directed

M&L Preparing new plastered surface,priming with chalk whiting and applying two coats of OBD on walls over a coat of primer all as specified and directed

M&L for preparation of new plaster surface of ceiling with three coat of white wash complete all as specified and directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening as per specification and drawings all as specified and directed

S&F solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frame covered with heat moulded plain PVC 'C' channesl having PVC sheet strip of 20mm width stuck inside with solvenr cement for stiles and plain colour PVC sheet for top rail, lock rail and botton rail on either4 side and as gap insert for top rail and botton rail, panelling fitted in the MS frame welded, sealed to stiles and rails with suitable PVC sheet beading and jointed together with slovent cement including aluminium mongeries etc all as specified and as directed.

S&F Steel windows/ventilators with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed

S&F Aluminum anodised, barrel tower bolts of extruded section and fixed of 200mm long all as specified and directed

Figured glass 3mm thick , pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane all as specified and directed

S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 of 100mm long all as specified and directed

S&F Aluminium handles, cast type, anodised of 125mm all as specified and directed

S&F in repair towel rail 20 mm dia, D type 60 cm long between flanges of Aluminum anodised all as specified and directed

S&F corner glass fancy type with stainless steel frame (200 mm x 200 mm)chromium plated screwed down for fixing to walls with screws all as specified.

S&F toilet paper holder fancy type chromium plated screwed down for fixing to walls with screws complete all as specified and directed

S&F chromium plated fancy type hand shower including fittings screwed down for fixing walls with screw complete all as specified and directed

S&F fancy type plastic cabinets mirror ivory colour fixing to walls complete 300x450x 100 mm fixed to walls complete all as specified and directed

S&F Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed by Engr-in-charge.

S & F PVC connection 15mm dia 450 mm long with 2 Nos brass check nuts with washer etc complete all as specified by Engr-in-charge.

S&F PVC valveless, syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle incl brackets capacity 06 ltrs and connection to pipe complete all as specified and directed

S&F bib tap fancy type CP 15mm dia of pipe all as specified and directed

S&F single concealed stop valve chrome plated, for 15mm dia iron pipe or for unions and fixed all as specified

S& F in repairs Soap dish, vitreous china white approximate size 160X160X90mm all as specified and directed

Vitreous china wash basin (white) of size 550mmx400mm including brass CP wast coupling 32mm dia with long screwed shank and fly nuts, PVC medium grade 32mm dia waste pipe, pvc connection 15mm dia 450mm long with brass CP nuts and washer at both ends complete all as specified and directed by Engr-in-charge.

S & F PVC (SWR) gully trap 125 / 110 mm including setting and jointing with solvent cement and removing old trap and making good all as directed by Engr in Charge

Pillar tap, cast copper alloy with capstan head, chromium plated screwed down high pressure with or without lettered hot/cold with long screwed shanks and fly nuts screw for iron pipe 15mm bore complete all as specified and directed by Engr-in-charge.

S&F single concealed stop valve chrome plated, for 15mm dia iron pipe or for unions and fixed all as specified

Rotational moulded polyethlene water storage tanks for 250 to 300 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position incls 15mm ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity for iron pipe and nipple suitable for HDPE water tank complet all as specified and directed by Engr-in-charge.

S& F vitreous china squatting pan , 'orissa' pattern, size 580 X 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe ) including connection to trap, and to flushing pipe ,antisyphonage pipe, etc. complete includig making good to floor

S & F 75 mm PVC (SWR) floor trap, plain with Chrome plated grating including jointing with solvent cement and removing old trap and making good all as directed by Engr-in-charge.

S&F UPVC pipe pressure rating 10kgf/CM2 fixed complete to walls, ceiling or in floors etc of 15mm bore UPVC tubing all as specified and directed

all as per item no 75 here in before but for 20 mm bore UPVC tubing

all as per item no 75 here in before but for 25 mm bore UPVC tubing

S&F PVC ( SWR) soil waste pipe in any length double socketed with rubber ring jointed laid in trenches or in floors 100/110mm dia bore of pipe ISI marked all as specified and directed

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls, including necessary brackets all as specified and directed .

S&F PVC (SWR) bends any radius 100mm bore with access door all as specified and directed

S&F PVC (SWR) bends any radius 75mm bore with access door all as specified and directed

S&F PVC (SWR) bends any radius 100mm bore all as specified and directed

S&F PVC (SWR) bends any radius 75mm bore all as specified and directed

S&F PVC(SWR) vent cowl 110mm bore all as specified and directed

M&L For Two coat of Synthetic enamel paint over a coat Zinc chrome primer, including Preparing new steel surfaces any description, over 10 cm width or grith,not otherwise described all as specified and directed

M&L for preparation of new plaster surface of wall with three coat of white wash including prepartion of surfaces complete all as specified and directed

S& F Vitreous china urinals,bowl type (back or corner wall type) complete, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets flush pipe, grating and Union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe all as specified and directed

S&F rotational moulded polythylene water storage tanks (500 Ltr) (Cylindrical vertical with closed top) hoisted and fixed in position all as specified

S&F Ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed (20mm) all as specified and directed

Excavation in Post holes ( or similar holes ) in hard dense soil, each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm.

M&L Providing cement concrete 1:3:6 type C2 (40 mm graded stone agg) as in foundations, filling and mass concrete, all as directed by Engr-in-charge.

S&F Framed brackets of angles or tees with web and flanges cut to shape drilled and counter sunk for screw, including bending and welding angles as necessary guesset plates, riveting etc n exc 10 kg each brackets conforming to Fe 290. Gde-E-165.

S&F Mild steel screw boplts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to fitted with washers and one hexagonal or square nut, n exc 5 cm long, dia of neck 11 to 15 mm thick.

M&L For Two coat of Synthetic enamel paint over a coat Zinc chrome primer, including Preparing new steel surfaces any description, over 10 cm width or grith,not otherwise described.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheeting, 0.50 mm thick, of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws or or fixed with 'L' or 'J' type or cranked hooks bolts in liew of screw all as specified by Engr-in-charge.

Point wiring complete for One light point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including non metalic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed on wall and ceiling/roof etc, with fixing of modular metal flush boxes not less than 1.2 mm thick of suitable modules, concealed in walls with modular white plated cover 3mm thick as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as directed NOTE: (a) Modular metal flush boxes concealed in wall with suitable cover plate for mounting switch/sockets etc and cost of cutting chases & making good as existing to disturbed surface with cement mortar, if required any shall be deemed to included in the quoted rates. (b) Modular fittings/fixtures such as switch, socket, regulator, bell push, etc., shall be measured and paid separately as under relevant item Make: Havells /Plaza/Anchor/Finolex/Nicco/Polycab/RPG

All as per ser item No. 1 above but for One fan point controlled by one way switch and regulator

All as per ser item No. 1 here in above but for one 5 Amps socket outlet on independent board.

S&F modular switch 1 way 6A, 240 volts, 1 module complete all as specified and directed Make: Anchor/Havells/Legrand/Cona/Crabtree

S&F ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65 x 50 mm three terminal complete all as specified

S&F modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type all as specified and directed Make: Anchor/Havells/Legrand/Cona/Crabtree

Supply, fixing, connecting and testing MCB single pole 5 to 32 Amps, 240 volt, 10 KA all as specified and directed Make: Indo Asian/L&T/Legrand/Havells

Supply and fixing sub main wiring with 2 runs of 2.5 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC FRLS conduit, medium grade, ISI marked, 20/25mm bore with conduit fittings and accessories concealed in wall/ceiling/floor including one run of 2.5 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete. NOTE: Two runs of 2.5.0 sqmm copper cable and one run of 2.5 sq mm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length Make: Havells /Plaza/Anchor/Finolex/Nicco/Polycab/RPG

Supply and fixing surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver for and including 1 x 18/20 watt ultra bright LED polycarbonate tubelight 1200mm, 865-CRI 80, 6500K etc including prewired with 3 core flexible cables of size 24/0.2mm with copper conductor from connector to light fittings & connecting up complete all as specified and directed. Make: Crompton/ Philips/Bajaj/Havells/Wipro

Supply, install & testing exhaust fan, PVC body 250mm sweep, white/ivory, sleek & elegant look, 240 volts, AC, high speed ventilating fan with powerful air flow, light weight, rust proof body & blade, self opening louvers for protection from birds & rain water complete fixed to wall with suitable MS bolts, grouted to wall incl cutting hole ventilating openings for for fixing fan and connecting up including provision cable from connector to fan with 3 core flexible copper conductor from ceiling rose to to exhaust fan including writing MES No. complete all as specified and directed Make: Cat No. Brisk Air 10" of Crompton of equivalent make

Supply only Chair Verandah all as specified and shown on E-in-C Branch Drawing No FD-256 SHT 1/1

Supply only foam with back 1500 mm long all as specified and shown on E-in-C Branch Drawing No FD-78(M) SHT 1/1

Supply only foam without back 1525mm long all as specified and shown on E-in-C Branch Drawing No FD-77(M) SHT 1/1

Supply only peg table all as specified and shown on E-in-C Branch Drawing No FD-277 SHT 1/1

mahadeva traders cotractor and suppliers

KEERTHI CONSTRUCTIONS

Shilpa Engineers and Contractors