Beutification of Swachh & Sundar Shaher in Different Location at Limbdi Nagarpalika area, Limbdi, Dist -Surendranagar (Swachh & Sundar Shaher Yojna) (Re-Tender)

Walkway Paver Block

Sr No Item Description Quantity Unit Rate Amount

Box Cutting The Road Surface To Proper Slope

And Chamber For Making a Base Of Road

1 Work Inclunding Removing The Excavated 150.00 Cumt 104.20

Stuff And Depositing On The Road Side Slope

As Deirected up to 50 mt. Lead

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- coarse sand : 6- hand broken stone

2 aggregates 40 mmnominal size) and curing 75.00 Cumt 2956.23

complete excluding cost of formwork in (A)

Foundation and Plinth

Providing and fixing pre-cast Rubber Dye / steel

Dye inter locking concrete block 60mm thick

with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per

3 approved design Confirming to IS 15658 : 2006 600.00 Sqmt 683.88

including 35 mm Sand layer for levelling and

filling the joint with sand in proper line and level

as per guidlines of IRC : SP 63-2018 etc.

Providing and fixing pre-cast concrete kerb

stone of gray cement based concrete block

30cm length,30cm height and 15cm thick of

4 M250 grade concret as per approved design 1000.00 Rmt 361.64

and including excavation for fixing in proper line

and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Providing and placing Cast Iron Outdoor Garden

Bench, 3 Seater, Size (Feet) 5ft with Wooden

Texture and Back Support loading and

5 unloading and carting site as per instuction of 9.00 Nos 9595.00

nagarpalika including leveling the ground

placing as directed at various place of

nagarpalika etc. complete.

Providing & Fixing PVC Dustbin Capacity 80 Lit

6 (2 nos) with stand Fitting as per 9.00 Nos 2527.02

Instruction,Including Materials & labours etc.

Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free 300.00 Sqmt 78.90

from mortar droppings and other foreign matter

and sand papered smooth.

Schedule B-1 Total Rs.

Sr No Item Description Quantity Unit Rate Amount

Digging holes in ordinary soil and refilling the

same with the excavated earth mixed with

manure or sludge in the ratio of 2:1 by volume (2

parts of stacked volume of earth after reduction

by 20% : 1 part of stacked volume of manure

1 after reduction by 8%) flooding with water, 60.00 Each 44.19

dressing including removal of rubbish and

surplus earth, if any, with all leads and lifts (cost

of manure, sludge or extra good earth if needed

to be paid for separately) Holes 60 cm dia, and

Trees Providing and stacking of Azadirachta

indica ( Neem ) of height 120-130cm in big

polybag of size 25 cm as per direction of the

officer - In - charge.

Trees Providing and stacking of Delonix regia

(Gulmohar) of height 150-165 cm. in big poly

bags of size 25 cm as per direction of the officer-

Trees Providing and stacking of Ficus religiosa

(Peepal) of height 150-165 cm. in big poly bags

of size 30 cm as per direction of the officer-in-

Providing and fixing M.S. flat iron tree guard

cm dia and 2 m high, above ground consisting

nos 25 x 6 mm, 2.25 m long and 8 nos 25 x

mm 2 m long verticals M.S. flats, riveted to

nos 25 x 6 mm M.S. flat iron rings in two halves,

fixing together at site with required six numbers

of 8 mm dia and 30 mm long bolts, including

painting two coats with synthetic enamel paint of

approved brand and manufacture over a coat of

primer. One name plate of 1 mm thick M.S.

5 sheet of size 250x100 mm shall be welded to 60.00 Each 4578.43

the tree guard near the middle height and

lettered CPWD / PWD/ any other approved

name. The tree guard shall be suitably fixed to

the ground by embedding four legs of tree guard

in pits of suitable dia and to a depth of 25 cm,

refilling the pits with soil and ramming, complete

in all respect as per satisfaction and direction of

Officer-in-charge.

Schedule B-2 Total Rs.

LED Light Pole-10

Sr No Item Description Quantity Unit Rate Amount

Providing 1:2:4 cement concrete foundation &

70 % PCC from bottom including excavation for

the pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved

manner. (for 4 & 6 mtr pole) (Item No-6.3.4)

Supplying & erecting Steel tubular pole

(Swaged) confirming to IS - 2713 (Part-II)

Manufacturing process of steel tubular pole

should be as per IS specification. Basic steel

tube should be ISI Marked. Pole should be

painted by one coat of Zinc comet Primer and

two coat of Aluminium /approved paint to be

2 erected on / in existing Foundation. The length 10.00 Each 6470.31

of poles are as below. (A) 7.5 mtr. Long Swaged

Steel tubular pole (i) pole as per IS code 410-

SP-4 with 300 X 300 X 4 mm base plate with

necessary G.I. J Bolts (Approximate Pole weight

67 Kg) For burial erection. (Item No-6.1.3(i))

M.S. Base plate 300 X 300 X 16 mm for pole,

Suitable for mounting on surface of foundation

3 with GI foundation bolts, with required stiffeners 10.00 Each 877.43

welded with pole.(Item No-6.1.3 (ii))

PU base primer and PU Paint on pole.(Item No-

Providing and erecting street light pole bracket

comprising main B Class MS pipe of

cm/require outside dia. complete with suitable B

Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5 mm / 80mm.

/ require size pole top having sufficient fasteners

for fixing the brackets and having spread of

5 mtr. length with suitable rise as per site 10.00 Each 817.91

condition & suitable welded stiffener reducer

and nipple with check nut complete painted with

one coat of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with

following nos of arms. [B] Double Arm bracket

1.5 Mtr (Item No-6.5.2a (B))

Supplying and erecting LED street light / Flood

light fittings with High power White LEDs

wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast

aluminium housing with smooth finish powder

coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with

company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity

6 ratio >0.45, Luminaire efficacy> 100 20.00 Each 1627.72

lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line

supply with over-voltage protection.(ii) 15 to

Watts (Item No-2-16-1(ii))

Making trench in soft soil of suitable width of

cm deep for laying cable or locating the fault all

7 over the run and back filling the same and 180.00 Rmt 49.60

making the surface as normal ground.(Item No-

Providing & laying approved make Double

walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable.(A)50 mm outer dia (Item No-

Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables.(B) 4 core 6 Sq. mm

(Item No-4.3.4 B)

Providing and erecting XLPE(IS:7098) (I)-88 ISI

armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables. (A) 3 core 2.5 Sq. mm

(Item No-4.3.2 A)

Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at 415 V,having

normal current rating up to 25 A to 100A. with

Fixed thermal & magnetic release suitable to

work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

housing.ICS=100% of ICU only Cat III

.(Item No-3.4.1)

Supplying & erecting approved make time

switch with single pole air break contacts

suitable for 230 V.15/16A.complete with self

starting motor driven clock ‘ON’ &’ OFF’

automatic arrangement at any predetermined

time during each 24 hours,With nickel cadmium

rechargeable battery backup erected as

directed..(Item No-6.7.1)

Supplying & erecting IP 55 grade following size

section pillar fabricated from joint less M.S.

Sheet with angle iron legs made from jointless

M.S. Angle with cable clamps to be buried in

ground to have appropriate erection to work

uniform until erected with cement concrete

foundation and 45 cm high bricks work finishing

with plaster etc. hinged double door internally

supported on both side,'with internal and outside

looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two

13 Nos. one is welded and other with nut and bolt 1.00 Each 14902.91

for erecting Bakelite sheet. Painting the Section

Pillar inside and out side with three tank powder

coated paint. section pillar roof should be

without joint with water leakage proof & tested

as per IP 55 test & followed by IS 2147 of

'(A) 150 X 90 X 75 cm section pillar fabricated

from 14 Gauge MS Sheet with angle iron legs

95 cm long made from 40 X 40 X 6 mm thick MS

angle. (Item No-6.6.1)

Supplying and erecting Fabricating terminal box

for street light pole made from 16 SWG M.S.

sheet having following size complete with fixing

arrangement for terminal board, with necessary

hole for wire entry and exit from the box. The

box shall be provided with cover and hinges on

14 one side and bolting at other end The box shall 10.00 Each 502.29

be fixed by clamps fabricated from 25mm x 6mm

flat.The box shall be painted with one coat of

red oxide and two coats of paint having

following box size. 330 mm x 260 mm x 140 mm

(depth) (Item No-6.4.2)

providing and erecting Miniature circuit breaker

single pole 6A to 25A suitable to operate on

V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to

IS 8828/1996 with ISI Mark . Cat.III (Item No-

Schedule B-3 Total Rs.

Total Tender Amount Rs.