Supplying, Errection, Testing and Commissioning of 25 KVA pole mounted distribution substation for feeding to road lighting network under village Mearth at Industrial Complex Ghatti Kathua

Amount

Supplying/Errection/Testing/Commissioning of 25 KVA Distribution Substation a) 25 KVA Distribution Transformer 11/433 KVA Level-2 copper wound with filling of fresh T-oil as required -1No b) P/F of steel tubular pole 410-SP-33 the pole shall be amount which shall be painted with red oxide & two coats of simmer paint cemented upto 5 feet in the ratio of 1:3:6 with 1 feet of Muff above the grand level with surface plastering etc. as required - 2 Nos. c) Gapless surge arrester 9 KV, 10KV L.A with polymer/ porcelain Housing station type- 1Set d) 11 KV G.O AB Switch 3 3 pole 200A – 1 Set e) 11 KV DO fuse 3 phase 200 Amp – 1 Set f) 11 KV Disc insulators (Polymer/ Porcelain) complete with fitting (45 KN) – 3 No. g) GI Chanel/ Angle/ Flat of size including damps – 200 Kg. h) 11 KV Pin insulators (polymer/porcelain) with pins (5 KN) – 3 No. i) Galvanized stay set with 50 x8 mm stay clamp, guy insulator (2 Nos), Anchor plate ( 200x 200 x 6 mm) Nut Bolts 2 No. turn Buckles 1.8m long 16 mm Dia meter solid GS stay rod 2 7/3.15 mm Dia GI stranded wire complete -2 Set. j) Wedge connector/ PG clamps – 6 Nos. k) P/F of 1x 120 unarmored Aluminum cable with thumbing to end terminals – 15 Mtr. l) Prodigy meter m) Galvanized Nut & Bolts – 8 Kg. n) Danger plate with clamp – 1 No. o) G.I Barbed wire for Anti climbing- 15 Kg. p) P/F of 0.05 ACSR Conductor – 10 Mtr q) P/L of Chemical earthing with Main Holes -3nos r) P/F of 25 x 5 mm G.I strip on surface or in recess for connection etc as required. s) Sundry items like Aluminium lugs, Jumpess Binding tape etc - LS t) P/F of fuse link Bus Bar on Angle iron for protection of transformer – 1 No.

Tapping Point along with HT Line:-- Providing and Fixing of tapping point for 25 KVA Distribution Substation along with HT Line compression of Following items:- i) 120 Sqmm HT AB Cable -120 ii) Steel tubular pole 9 Mtr-5 No. iii) Clamp hook for supporting of HT Cable iv) H.T Connection Kit- 3No. v) Nut Bolt with washer –LS vi) Go/Do switch to disconnect the HT Line- 1 No. vii) Misc item required as per site requirement - Item increase/ Decrease as per site requirement.

GLOBAL ENGINEERS

VEE GEE ENGINEERS