Fresh Tender LAC ADS Sri Ramesh Chennithala MLA Haripad Block Panchayath 2023 2024 Construction of a new building in Haripad Govt UP School Malayalam School Building Construction General Civil Work

Work Name:LAC-ADS-LAC - ADS Sri. Ramesh Chennithala MLA.Haripad Block Panchayath 2023-2024 Construction of a new building in Haripad Govt.UP School (Malayalam School)-Building Construction-General Civil Work

瑩潩湡⁤楢摮湩⁧污潣灭敬整甠瑰汰湩桴氠癥汥桔牥潭ⴠ䴠捥慨楮慣汬⁹牔慥整⁤慢獲漠⁦牧摡⁥敆㔭〰⁄牯洠牯ࡥ楫潬牧浡đ㔀⸰⸶⸱㨵潓楬⁤汢捯慭潳牮⁹獵湩⁧牰⁥慣瑳猠汯摩戠潬正⁳ 慆瑣牯⁹慭敤 景猠穩⁥〳㉸砰〲浣漠⁲敮牡獥⁴癡楡慬汢⁥楳敺挠湯楦浲湩⁧潴䤠⁓ㄲ㔸倠牡⁴⁉景ㄠ㜹‹潦⁲畳数⁲瑳畲瑣牵⁥灵琠汦潯⁲睴敬敶桴捩湫獥⁳〲浣愠摮愠潢敶椠㩮䌠⁍㨱‶ ‱散敭瑮㨠㘠挠慯獲⁥慳摮 瑥⁣潣灭敬整û㔀⸰⸶⸲㨱潓楬⁤汢捯慭潳牮⁹獵湩⁧牰⁥慣瑳猠汯摩戠潬正⁳䘨捡潴祲洠摡⥥漠⁦楳敺㌠砰〲ㅸ‵浣漠⁲敮牡獥⁴癡楡慬汢⁥楳敺挠湯楦浲湩⁧潴䤠⁓ㄲ㔸瀠牡⁴⁉景ㄠ㜹‹潦⁲潦湵慤楴湯愠摮瀠楬瑮⁨楷桴琠楨正敮獳ㄠ挵湩›䵃ㄠ㘺⠠ㄠ挠浥湥⁴㘺挠慯獲⁥慳摮 瑥⁣潣灭敬整Ĩ㔀⸰⸶⸳㨲潓楬⁤汢捯慭潳牮⁹獵湩⁧牰⁥慣瑳猠汯摩戠潬正⁳䘨捡潴祲洠摡⥥漠⁦楳敺㐠砰〲ㅸ‰浣漠⁲敮牡獥⁴癡楡慬汢⁥楳敺挠湯楦浲湩⁧潴䤠⁓ㄲ㔸瀠牡⁴⁉景ㄠ㜹‹潦⁲畳数⁲瑳畲瑣牵⁥灵琠汦潯⁲睴敬敶潦⁲〱挠桴捩慷汬椠›䵃ㄠ㘺⠠ㄠ挠浥湥⁴›‶潣牡敳猠湡⥤椠据畬楤杮挠獯⁴景猠慣晦汯楤杮挠浯汰瑥䁥㌱ㄮㄮㄺ′浭挠浥湥⁴汰獡整⁲景洠硩ㄺ㐺⠠ㄠ挠浥湥⁴›‴楦敮猠湡⥤m㄀⸳⸷㨱㈱洠散敭瑮瀠慬瑳牥映湩獩敨⁤楷桴愠映潬瑡湩

g coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)@13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)—
11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.1
50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack woodn
50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood_
50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood
50.9.6.1:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shuttersŠ13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer‡13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work‚13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new workû9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etckgx10.6.3:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick to coverÙ13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work—10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
9.53:Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)eachÚ9.97.3:Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:200x10 mmnoÜ9.100.1:Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm650.9.15.1:Supplying and fixing 200 mm Aluminium aldropô
16.89:Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi models location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.16.90:Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.:50.9.15.4:Providing and fixing iron hooks and eyes: 150 mmÈ10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. completeè50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete¹
12.8:Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required.ù12.12.2:Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete.Plain wing adjustable ridges“OD474078/2024-2025:Supplying and fixing granite name board 75*60 cm size on brick wall with engraving letters as per the direction Dept EnginieersîOD164036/2025-2026:Providing and fixing unplasticised rigid half split PVC rainwater pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 using as rain water gutter, (i) single socket pipe 110mmdia1 meter