30/2020-21(EDCR) Replacement of ACSR Weasel Conductor by New ACSR Dog Conductor of 33 kv line to 33/11 KV Substation Dadiyal, Rampur under jurisdiction of EDD-II, Rampur emanating from 132 KV Tanda Substation

Amount

Safe Carriage of the following material from Store Centre, Rampur to work site with proper stacking with loading & unloading at both ends respectively distance within 50 km.

9 Mtr long PCC Pole.

ACSR Dog conductor & other line material such as V type X-arm, Stayrod, Earthing Rod, 33 KV X-arm etc.

Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 33 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 100x50x50 mm with Nuts & Bolts, as per RESPO Norms. a) Single support

9 Mtr long PCC Pole

Grouting of pole in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. a) Single support

9 Mtr long PCC Pole

Providing Stay Clamp & Insulator and Grouting of Stay Rods(20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:8(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc.

Fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps.

Earthing of pole with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 8SWG and earthing lugs

Providing & Fixing F Bracket on pcc poles as per RESPO Norms and as per direction of Supervising Engineer.

Dismantling of old ACSR Wesel Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Replacement of disc insulator on poles as per RESPO Norms and as per direction of Supervising Engineer.

fixing of pin insulator with pin on poles as per RESPO Norms and as per direction of Supervising Engineer.

Replacement of pin insulator on poles as per RESPO Norms and as per direction of Supervising Engineer.

Laying, sagging, tightening, stringing and binding etc of ACSR Dog Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Back Cartage of ACSR Wesel Conductor old used and Multiple Scrap material from site to store with loading & unloading at both ends respectively distance within 50 km

M/s Charley Enterprises

R S Electricals Repair and CO

Om Enterprises

N K Electricals

Cosmic Enterprises