REPAIRS TO SECURITY /COMPOUND WALL FENCING, STEEL GATES ETC AT CERTAIN LOCATION INCLUDING PAINTING AT MILITARY STN JAMNAGAR

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed by Engineer-In-Charge.

Excavating in post holes (or similar holes) in hard dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and as directed by Engineer-In-Charge.

M&L PCC (1:3:6) nominal mix type C-2 (using 40 mm grade aggregate) as in foundations, fillings and mass Concrete complete all as specified and as directed by Engineer-In-Charge.

M & L for providing precast reinforced cement concrete 1:1.5:3 type A1 using (20mm graded stone aggregate) in precast post,fencing post,straining or terminal post,struts etc for fencing,average sectional area exc 100 and n exc 250 sqm with or without chamfered angles and flat ,splayed,rounded or mitred tops as direct and fixed complete all as specified and as directed by Engineer-In-Charge.

Dismantling fencing wire mesh any type complete all as specified and as directed by Engineer-In-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed by Engineer-In-Charge. Note-MS Flat & MS bar to be measured and paid separately.

Supply only chain link MS Galvanized fencing size or type 75mm x 75mm with 4mm dia wire incl line wire and any type of standarded rails standard bolts incl binding wire (if minimum weight is not available then contractor has to provide next higher weight without extra cost) complete all as specified and as directed by Engineer-In-Charge.

M & L MS round bars 10mm dia conforming to Fe-410W or Fe310 fixed indipendantely , including , hooking ends fixing chain link fencing as in bearing bars and binding with and including mild steel wire (annealed) not less than 0.9mm dia of securing with clips complete all as specified and as directed by Engineer-In-Charge.

M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in reinforcement of fencing posts,colums,plinth beams in fencing complete all as specified and as directed by Engineer-In-Charge.

All as per item No.9 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed by Engineer-In-Charge.