COMPREHENSIVE MAINT AND PETTY REPAIR OF INTERNAL WIRING ELECTRICAL FITTINGS FIXTURES FANS AND INTERNAL WATER SUPPLY INCLUDING REPAIR TO GEYSER AND CLEANING OF SERVICE TANKS AND SOME CONNECTED WORKS IN SNC O MESS AND ALLIED BLDGS LIKE FOREIGN OFFICERS

Amount

Attending complaint including transportation of tools for rectification of urgent nature of electrical complaints like checking of existing electrical items for continuous electric supply including carrying out minor repairs such as checking of voltage calibration,checking of variation of R Y B phase in LT panel/DBs, changing of MCBs, small pieces of wires including connections etc carrying out repairs such as tightening of loosen electric connections, nuts, bolts, screws of switches, sockets, switch boards, making joints and covering with PVC tape, minor repairs to ceiling fans / exhaust fans like replacement of capacitors, cleaning and oiling etc. as required to make the electrical items/ appliances fully functional at D area at Naval Base during off hours (1700 hrs evining to 0900 Hrs morning ) on all working days all as specified and directed. NOTE:- (i) The contractor should display contact number at complaint cell to register users complaint. (ii) The recovery of rupees 500 per complaint will be charged if contractor failed to attend that instipulated time period . (iii) Number of complaints may vary day to day and shall be on required basis. Contractor shall quote their rates accordingly.including in all aspects like labours, tool, transportation etc.

Taking down Copper/ aluminium point wiring (light, fan, socket, bell, power point) complete fitting such as switches, ceiling roses, pendants, regulators, sockets, light fitting any type, building security light removing materials to store for keeping in safe custdoy for taking credit to match with existing suface all as specified and directed.

Material and labour for point wiring for one light with 1.5 sqmm PVC insulated (FRLSH) unsheathed copper conductor multistranded 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity conductor including connected to common earth dolly drawn through and including rigid PVC Conduit 200 mm dia medium grade ISI marked Concealed of suitable size with all accessories and sunken box of 1.6 mm thick and 60 mm Depth pressed steel box factory made for mounting of switch, socket and fan regulator with modular frames covers including chase cutting and making good to the disturbed surface and matching to the existing finishes specifications complete all as specified and as directed.

All as per item No. 3 here-in-before but for one fan point controlled by one push button on independent board.

All as per item No. 3 here in before but for one bell point controlled by one 5 Amp bell push on independent board complete all as specified and directed.

All as per item No. 3 here in before but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No. 3 here in before but for one 5 pin 5 Amp socket outlet point on the same board complete all as specified and directed.

All as per item No. 3 here in before but using with 2.5 Sqmm copper conductor multistranded (FRLSH) PVC insulated, unsheathed cable and including 2.5 Sqmm copper conductor cable multistranded (FRLSH) PVC insulated and unsheated cable as earth continity wire and connecting to common earth dolly for one 6 pin 15 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 3 above but with 4 Sqmm copper conductor including 4.0 Sqmm copper cable on earth wire for sheet metal enclosure complete all as specified and as directed.

S&F in replacement modular Bell push 6A, 1module, complete all as specified and as directed.

S&F in replacement in repair fan regulator, modular electronic rotary, stepped type 100 Watt, 240 Volt 50 Hz hum free 2 module complete all as specified and as directed.

S&F in replacement switch modular 6 Amps 240 Volts one way switch complete all as specified and as directed.

S&F in replacement Socket 6 Amps AC 240 Volts 2/3 pin combined 2 modular type complete all as specified and as directed.

S&F in replacement Socket 6A/16 Amps-2/3 pin combined AC 240 Volts modular type complete all as specified and as directed.

S&F in replacement Switch modular type AC 240 volts 16 Amps one way complete all as specified and as directed.

S&F in replacement sunken box with modular white cover plate 2 module with removing old type sunken boxes /wooden board and match with existing surfaces complete all as specified and as directed.

S&F in replacement sunken box with modular white cover plate 3 module with removing old type sunken boxes /wooden board and match with existing surfaces complete all as specified and as directed.

S&F in replacement sunken box with modular white cover plate 4 module with removing old type sunken boxes /wooden board and match with existing surfaces complete all as specified and as directed.

S&F in replacement sunken box with modular white cover plate 6 module with removing old type sunken boxes /wooden board and match with existing surfaces complete all as specified and as directed.

S&F in replacement switch piano flush type single pole one way 5 Amp one way complete all as specified and as directed.

S&F in replacement switch piano flush type single pole one way 15 Amp complete all as specified and as directed.

S&Fin replacement, socket outlet 5 Amps, 5 pin, 2 in 1 complete all as specified and directed.

S&F in replacement, socket outlet multipurpose 5 and 15 Amps, 5 pin, 2 in 1 complete all as specified and directed.

S&F in replacement, fan regulator electronic step type 100 W, 250 Volts complete all as specified and as directed.

S&F in replacement ceiling rose surface bakelite 65 x 50 mm, 3 terminals complete all as specified and as directed.

S&F in replacement, lamp holder, PVC/ poly carbonate type with back plate suitable for batten fittings, complete all as specified and as directed.

S&F in replacement electric bell, AC 230 Volt single pole complete all as specified and as directed.

M&L in replacement sub main wiring with 2 runs of 4 Sqmm PVC insulated unsheathed multistranded single core copper conductor FRLSH, ISI marked cable drawn through ISI Marked, medium grade, non metallic, PVC conduits and all accessories, with 1 run of 4 Sq mm PVC insulated unsheathed multistranded single core copper conductor FRLSH, and making good disturbed surfaces, applying distemper / Emulsions matching to the existing colour / quality of walls/floors/ceiling etc complete all as specified and as directed. Note:- Three run of cable and one run of PVC conduits shall be measured as one unit.

All as per item No. 28 here-in-before but 2 runs of 6 Sq mm single core FRLSH copper conductor and 1 run of 6 sqmm conductor for earthing. Note:- Three run of cable and one run of PVC conduits shall be measured as one unit.

All as per item No. 28 here-in-before but 4 runs of 10 Sq mm single core FRLSH copper conductor and 1 run of 10 sqmm conductor for earthing. Note:- Three run of cable and one run of PVC conduits shall be measured as one unit.

All as per item No. 28 here-in-before but 4 runs of 16 Sq mm single core FRLSH copper conductor and 1 run of 16 sqmm conductor for earthing. Note:- Three run of cable and one run of PVC conduits shall be measured as one unit.

S&F SPN enclosure with two pin and earth plug and socket complete with one SP MCB, 20 Amps having breaking capacity 10 kA, including taking down old unserviceable eath plug complete all as specified and as directed.

S&F triple pole enclosure with three pin and earth plug and socket complete with one TP MCB, 20 Amps having breaking capacity 10 kA, including taking down old unserviceable eath plug complete all as specified and as directed.

S&F triple pole enclosure with three pin and earth plug and socket complete with one TP MCB, 32 Amps having breaking capacity 10 kA, including taking down old unserviceable eath plug complete all as specified and as directed.

S&F triple pole enclosure with three pin and earth plug and socket complete with one TP MCB, 63 Amps having breaking capacity 10 kA, including taking down old unserviceable eath plug complete all as specified.

S&F in replacement sheet metal enclosure for MCB DB, SPN, 2 ways, double door, with 200 Amps rated bus bar, having IP-43 protection complete all as specified and as directed.

S&F in replacement sheet metal enclosure for MCB DB, SPN, 4 ways, double door, with 200 Amps rated bus bar, having IP-43 protection complete all as specified and as directed.

S&F in replacement sheet metal enclosure for MCB DB, SPN, 6 ways, double door, with 200 Amps rated bus bar, having IP-43 protection complete all as specified and as directed.

S&F in replacement sheet metal enclosure for MCB DB, SPN, 8 ways, double door, with 200 Amps rated bus bar, having IP-43 protection complete all as specified and as directed.

S&F in replacement sheet metal enclosure for MCB DB, SPN, 12 ways, double door, with 200 Amps rated bus bar, having IP-43 protection complete all as specified and as directed.

S&F SP 6-32 Amps current carrying capacity 'C' curve miniature circuit breaker (MCB) 240V, 10KA in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

S&F SPN 20-32 Amps current carrying capacity 'C' curve miniature circuit breaker (MCB) 240V, 10KA in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

S&F SPN 40-63 Amps current carrying capacity 'C' curve miniature circuit breaker (MCB) 240V, 10KA in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

S&F in replacement sheet metal enclosure for MCB DB, TPN, 4 ways, double door, with 200 Amps rated bus bar, having IP-43 protection complete all as specified and as directed.

S&F in replacement sheet metal enclosure for MCB DB, TPN, 6 ways, double door, with 200 Amps rated bus bar, having IP-43 protection complete all as specified and as directed.

S&F in replacement sheet metal enclosure for MCB DB, TPN, 8 ways, double door, with 200 Amps rated bus bar, having IP-43 protection complete all as specified and as directed.

S&F in replacement sheet metal enclosure for MCB DB, TPN, 12 ways, double door, with 200 Amps rated bus bar, having IP-43 protection complete all as specified and as directed.

S&F sheet metal enclosure vertical TPN DB when MCCB's to be used 4 way with 200 amps bus bar double door IP 43 metal door complete all as specified and as directed.

All as per item No. 48 here-in-before but for 6 way complete all as specified and directed.

All as per item No. 48 here-in-before but for 8 way complete all as specified and directed.

S&F TPN 16-32 current carrying capacity 'C' curve miniature circuit breaker (MCB) 240V, 10KA in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

S&F TPN 40-100 Amps current carrying capacity 'C' curve miniature circuit breaker (MCB) 240V, 10KA in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

S&F TP 25-63 Amps current carrying capacity 'C' curve miniature circuit breaker (MCB) 240V, 10KA in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

S&F in replacement SS enclosure suitable for MCCB 100-200 amps complete all as specified and directed. Make: L&T Cat Part No. CM91003OOOO or equivalent make from the approved list of manufactures.

S&F in replacement MCCBs FP 63 Amps thermal magnatic 25 kA complete all as specified and directed. Make: L&T Cat Part No. CM91712OOJOOG or equivalent make from the approved list of manufactures.

S&F in replacement MCCBs FP 100 Amps thermal magnatic 25 kA complete all as specified and directed. Make: L&T Cat Part No. CM90642OOLO or equivalent make from the approved list of manufactures.

S&F in replacement MCCBs FP 160 Amps thermal magnatic 25 kA complete all as specified and directed.

S&F in replacement MCCBs FP 200 Amps thermal magnatic 25 kA complete all as specified and directed.

S&F in replacement MCCBs FP 400 Amps thermal magnatic 25 kA complete all as specified and directed.

S&F in replacement ceiling light driver 5/ 7/ 10 Watt with all accessories and connection to the electric circuit complete all as specified and directed.

S&F in replacement ceiling light driver 12/ 15/ 20 Watt with all accessories and connection to the electric circuit complete all as specified and directed.

S&F in replacement LED Tubelight fitting 20 Watts, smart Extruded Aluminium LED Batten (4 ft) with higher efficiency, Microwave sensor to save more energy reduces the light by 70% during non-occupancy complete all as specified and directed. Make: Cat Part No. BCLAB 20W LED PS of Bajaj or equivalent make from the approved list of manufactures.

S&F in replacement LED glass T8 tube 20 watt, 220 volt , 50 Hz, LED tube rod, double side connection inbuilt driver, complete all as specified and directed. Make: Cat Part No. CRYSTAL1213T8DSTL20WLED865SGLASS of Havells or equivalent make from the approved list of manufactures.

S&F in replacement LED light fitting 20 W, high performance batten , 220 volt, 50 Hz, 6000 k surface mounted high quality extruded polycarbonate, enviromental friendly, energy efficient, with all connecting accessories with suitable connection complete all as specified and directed. Make: Cat Part No. CCS-100-20-65-HL2-DP-NWH of Crompton or equivalent make from the approved list of manufactures.

S&F in replacement LED light fitting 10 W, high performance batten , 220 volt ,50 Hz, surface mounted high quality aluminium extruded with all connecting accessories, with suitable connection complete all as specified and directed. Make: Cat Part No. LDL-10-CDL of Crompton or equivalent make from the approved list of manufactures.

S&F in replacement mirror light 18 watt 50 hz,230 volts with all accessories and connection to the electric circuit complete all as specified and directed. Make: Cat Part No. LMCL18 of Luker or equivalent make from the approved list of manufactures.

S&F in replacement mirror light 12 watt 50 hz,230 volts with all accessories and connection to the electric circuit complete all as specified and directed. Make: Cat Part No. LMCL12 of Luker or equivalent make from the approved list of manufactures.

S&F in replacement 15 Watt Square recessed mounted down lighter with high luminous LED for indoor application,230 volts ,50 Hzs ,min 100 lm /watt with all accessories and connection to the electric circuit complete all as specified and directed. Make: Cat Part No. LSDE-15-CDL of Crompton or equivalent make from the approved list of manufactures.

S&F in replacement 12 Watt Square recessed mounted down lighter with high luminous LED for indoor application,230 volts ,50 Hzs ,min 100 lm /watt with all accessories and connection to the electric circuit complete all as specified and directed. Make: Cat Part No. LSDE-12-CDL of Crompton or equivalent make from the approved list of manufactures.

S&F in replacement 15 Watt recessed round down lighter with high luminous LED for indoor application,230 volts ,50 Hzs ,min 100 lm /watt with all accessories and connection to the electric circuit complete all as specified and directed. Make: Cat Part No. LCDE-15-CDL of Crompton or equivalent make from the approved list of manufactures.

S&F in replacement 12 Watt recessed round down lighter with high luminous LED for indoor application,230 volts ,50 Hzs ,min 100 lm /watt with all accessories and connection to the electric circuit complete all as specified and directed. Make: Cat Part No. LCDE-12-CDL of Crompton or equivalent make from the approved list of manufactures.

S&F in replacement 12 Watt surface mounted round down lighter with high luminous LED for indoor application,230 volts ,50 Hzs ,min 100 lm /watt with all accessories and connection to the electric circuit complete all as specified and directed. Make: Cat Part No. LCSR-12-CDL of Crompton or equivalent make from the approved list of manufactures.

S&F in replacement Ceiling light in Dome series 18 watt round 18 watt 50 hz,230 volts with all accessories and connection to the electric circuit complete all as specified and directed. Make: Cat Part No. LCL18R of Luker or equivalent make from the approved list of manufactures.

S&F in replacement 10 Watt recessed round down light complied with motion sensor with high luminous LED for indoor application,230 volts ,50 Hzs ,min 100 lm /watt with all accessories and connection to the electric circuit complete all as specified and directed.

S&F in replacement recess mounted/surface mounted commercial luminaire 36 watt complied with motion sensor, 50 Hz, 220 volts, 5700 K LED down lighter 2'x2' complete all as specified and directed.

S&F in replacement suspened LED lighting solution with 52 mm width and 75 mm height 24 watt watt 230V,50 Hz, including connected accessories including provision of flexible copper wire from ceiling rose to light fitting terminal complete all as specified and directed. Make: Cat Part No. CCP-121-24-40-SL-NWH of Crompton or equivalent make from the approved list of manufactures.

S&F in replacement bed side Lamp 3 watt 50 hz,230 volts,3000k with all accessories and connection to the electric circuit complete all as specified and directed. Make: Cat Part No. 48042 of Philips or equivalent make from the approved list of manufactures.

S&F in replacement recess mounted/surface mounted commercial luminaire 36 watt ,50 Hz ,220 volts,5700 K LED down lighter 2'x2' , all as specified and directed. Make: Cat Part No. VENUSNEOHE2X2R36WLED857PIRSENSOR of Havells or equivalent make from the approved list of manufactures.

S&F in replacement dimmable cob light light 7 watt 50 hz,230 volts with all accessories and connection to the electric circuit complete all as specified and directed. Make: Cat Part No. LCOBD07 of Luker or equivalent make from the approved list of manufactures.

S&Fin replacement dimmable cob light light 12 watt 50 hz,230 volts with all accessories and connection to the electric circuit complete all as specified and directed. Make: Cat Part No. LCOBD12 of Luker or equivalent make from the approved list of manufactures.

S&Fin replacement indoor wall mounted light 12 watt ,140 volt to 265 volts,IP-20 ,50 Hz ,aluminium housing with all accessories and connection to the electric circuit complete all as specified and directed. Make: Cat Part No. LWL105 of Luker or equivalent make from the approved list of manufactures.

S&F in replacement LED Flood Light 30 Watt,50 Hz,220 volts having IP-66 protection, pressure die cast aluminium housing, high luminious efficiancy and high power complete all as specified and directed. Make: Cat Part No. LFLR30 of Luker or equivalent make from the approved list of manufactures.

S&F in replacement LED Flood Light 50 Watt,50 Hz,220 volts having IP-66 protection, pressure die cast aluminium housing, high luminious efficiancy and high power complete all as specified and directed. Make: Cat Part No. LFLR50 of Luker or equivalent make from the approved list of manufactures.

S&F in replacement circular highbay LED light 80 Watt, 240 volt, min lmumens 110 Lm/w, IP 66 including provision of flexible copper wire from ceiling rose to light fitting terminal complete all as specified and directed. Make: Cat Part No. LHB11-80-CDL/60-M of Crompton or equivalent make from the approved list of manufactures.

S&F in replacement LED building security light 45 watts ,50 Hz,220 volts having IP-65 protection, pressure die cast aluminium housing, high luminious efficiancy and high power complete all as specified and directed. Make: Cat Part No. ENDURAPEARLNEOSL40WLED757PASYTOPC of Havells or equivalent make from the approved list of manufactures.

S&F in replacement LED building security light 60 watts ,50 Hz,220 volts having IP-65 protection, pressure die cast aluminium housing, high luminious efficiancy and high power complete all as specified and directed. Make: Cat Part No. ENDURAPEARLNEOSL60WLED757PASYTOPC of Havells or equivalent make from the approved list of manufactures.

S&F Flame proof/ Weather proof LED tube light fitting (4 feet) suitable for 1 x 20 watt with glass & connector suitable for LED tube light with all accessories prewired, product in Al. die cast alloy LM6 construction of Gas Gr. IIA, IIB certified by CIMFR dhanbad &CCOE(PESO) Nagpur along with ISI marking including testing complete all as specified and directed including taking down of existing fitting complete all as specified and directed. Make: Make: Cat Part No. Crompton part No EXTN1LT8-16/20 or equivalent make from the approved list of manufactures.

S&F Flame proof/ Weather proof LED tube light fitting (4 feet) suitable for 2 x 20 watt with glass & connector sutable for LED tube light with all accessories prewired, product in Al. die cast alloy LM6 construction of Gas Gr. IIA, IIB certified by CIMFR dhanbad &CCOE(PESO) Nagpur along with ISI marking including testing complete all as specified and directed including taking down of existing fitting complete all as specified and directed. Make: Make: Cat Part No. Crompton part No EXTN2LT8-16/20 or equivalent make from the approved list of manufactures.

S&F FLP rotary switch single pole 16 Amps and fixing arrangement including taking down of existing FLP swtich complete all as specified and directed. Make/Cat No: Sudhir switch Gear RI/OA/1010-2A or equivalent make from the approved list of manufactures.

S&F in replacement XLPE insulated, galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, cross-sectional area 6 sq.mm 2 core including taking down old unserviceable cable complete all as specified and directed.

S&F in replacement XLPE insulated, galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, cross-sectional area 10 sq.mm 4 core including taking down old unserviceable cable complete all as specified and directed.

S&F in replacement XLPE insulated, galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, cross-sectional area 16 sq.mm 4 core including taking down old unserviceable cable complete all as specified and directed.

Taking down unserviceable ceiling fan of 1200mm/1400mm sweep, cutting out the existing burnt out fan motor winding, cleaning the motor slots, rewinding the motor with insulated copper winding wire of existing gauge, baking / heating up the motor to achieve the proper insulation resistance and refixing testing complete including marking MES No complete all as specified and directed.

Ditto all as per item Ser No. 93 above but exhaust fan of 450/300/250 mm sweep complete all as specified and directed.

Ditto all as per item Ser No. 93 above but wall mounted fan of 400 /450 mm sweep complete all as specified and directed.

Ditto all as per item Ser No. 93 above but pedestal fans 600 /400 mm sweep complete all as specified and directed.

Ditto all as per item Ser No. 93 above but industrial air circulator fans of any sizes complete all as specified and directed.

M&L for checking of ceiling fans stability (like fan hooks,nuts, bolts ,hanging rod ,canopy ,washer etc ) exhaust fan stability , loose connection in destribution boards, MCBs in D Area at Naval base all as specified and directed. Note: - 1. The contractor shall prepare a register and enter office name with signature of offce incharge and the same shall be submitted to Engineer-in- Charge. 2. Checking of 7 fans and 2 DBs of any type at a time is shall be considered as one job.

S&F ball bearing 6201 suitable for ceiling fans complete all as specified and directed.

S&F ball bearing 6202 suitable for ceiling fans complete all as specified and directed.

S&F in replacement, capacitor for ceiling fans,230 volts, 2.5 MFD including necessary soldering complete all as specified and as directed.

S&F in replacement, capacitor for any type of exhaust fan/ pedestial fan/ air circulator fan 230 volts AC including necessary soldering of capacity 4 MFD complete all as specified and directed.

S&F in replacement nickel plated mild steel clamps, nuts, bolts, washers and split pin suitable for ceiling fans any type, any make, any size complete all as specified and directed.

S&F in replacement down rod, suitably threaded and holed, made out of 15 mm dia GI tubes, duly painted, 2' long, suitable for ceiling fans any type, any make, any size complete all as specified and directed.

Ditto all as per item Ser No 104 above but 3' long

Ditto all as per item Ser No 104 above but 5' long

S&F replacement copper conductor multistranded cable flexible 03 core PVC insulated of size 40/0.076 at site/MES store yard complete all as specified and directed.

S&F in replacement fan canopy with tightening screw/check nut, made out of PVC, suitable for ceiling fans any type, any make, any size complete all as specified and directed.

S&F in replacement rubber reel insulator, suitable for ceiling fans any type, any make, any size complete all as specified and directed.

M&L in replacement for hanging hook for ceiling fan with nuts bolts and washer min thickness 5 mm complete all as specified and directed.

S&F in replacement of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. Make: Havells Cat Part No. Efficiencia Neo (BLDC 26 W) or equivalent make from the approved list of manufactures. Note : Old fan shall be deposited to AGE (E/M) store yard.

Supply and fixing in replacement of Pedestral Fans, metallic body 400 mm sweep Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. Make: Havells Model No. Turbo Force or equivalent make from the approved list of manufactures. Note : Old fan shall be deposited to AGE (E/M) store yard.

Supply and fixing in replacement of PVC body wall fans 230 volts single phase oscillating 400 mm sweep Five star rated with brushless direct current motor (BLDC) suitable for wall mounting complete all as specified and directed. Make : Havells Cat Part No. Girik or equivalent make from the approved list of manufactures. Note : Old fan shall be deposited to AGE (E/M) store yard.

S&F in replacement PVC body exhaust fan motor suitable for 250/300 mm of size of any make as per site requirement all as specified and directed.

S&F in replacement exhaust fan motor suitable for metallic body exhaust fan for 250/300 mm of size of any make as per site requirement all as specified and directed.

Supply and fixing in replacement of 250mm sweep, PVC body exhaust fan heavy duty, single phase 230 volts, all complete all as specified and directed. Make : Havells Cat Part No. Ventil Air-DX white or Crompton Cat Part No EXHD300-4-1 or equivalent make from the approved list of manufactures. Note : Old fan shall be deposited to AGE (E/M) store yard.

M&L in replacement Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanized iron wire 4 mm dia as earth up to 7.5 m distance and connected by means of bolts, nuts, checknuts and washers of galvanised iron or steel all shown in electric plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including provision of necessary excavation and earth work in any type of soil, PCC pit , RCC cover 50 mm thick, reinforced with 8 mm dia TMT bars both ways @ 10 CM c/c , 20 mm bore medium grade watering pipe, water funnel, 15 mm bore GI medium grade protection pipe, common salt, charcoal dust, returning, filling in of soil, removal of spoil to a distance not exceeding 50 mtr etc including testing on completion completeall as specified. Note :- (i) The unit rate includes for protection pipe and earth lead upto 7.50 Mtr. (ii) Earth lead beyond 7.50 Mtr length shall be measured and paid separately.

M&L in replacement earthing complete with galvanised steel earth plate elctrode 60 x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth strip 25 x 4 mm as earthing lead by means of bolts nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.point 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

M&L for chemical earthing complete with copper plate size 90x60x5mm burried 3 Mtr length directly in ground and filled with back filling compound conforming to is 3043-1987 connected to copper strip of size 32x6 mm by means of bolts, nuts and washers made out of brass and connected to test point including necessary Excavation earth work and PCC 1:3:6 type C1 chamber 40 mm thick RCC cover complete all as chemical earthing manufacture as per recommended in relevant ES code of practice. Note: Rate quoted shall be deemed to be inclusive of cost of copper earthing strip 32x6mm and protection pipe upto 7.5 mtr length with complete earthwork.

M&L in replacement aluminium strip 25 x 3.15 mm with porcelain insulators, saddles and fixing screws etc for roof conductor and down conductor above ground all as specified and directed.

M&L in replacement copper strip 20 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground all as specified and directed.

M&L in replacement air termination single pointed aluminium rod 12mm dia and 300mm long all as specifed and directed.

M&L for test point terminal block made of gunmetal of size 75x75x25mm drilled and screened including all fixing arrangements with hexagonal headed screws and taking down old ones complete all as specified and directed.

M&L for checking of earthing resistence and E-N voltage with caliberated earth tester meter and multimeter including recharging of conventional earthing of lightening arrestor of building /workshop/hanger /OTM etc at Naval Base Kochi complete with chemical, maintaining the earth testing record, rectification of earthing related fault also as per user signature and JE E/M verified complete all as directed.

M&L in replacment galvanised steel strip 32mmx6mm complete with,protection sleeves, saddles,seprator and fixing screws at surrounding inside and outside the bldg complete all as specified and directed.

M&L in replacement galvanised steel strip 25mmx4mm complete with,protection sleeves, saddles,seprator and fixing screws at surrounding inside and outside the bldgcomplete all as specified and directed.

M&L in replacement of eathing chamber made out FRP of breaking capacity of 5 ton with necessory pcc work required with smooth surface duly coloured after repair work and cover of the size of the earth pit comple all as specified and directed.

S&F in replacement 4mm dia galvanised iron or steel wire burried in ground fixed on walls and connected to main earth strip including excavation and earth work refilling etc. compete all as specified and as directed.

S&F in replacement for rigid non metalic PVC medium grade conduit including junction boxes, tee, bends, elbows, reducers bell mouth tube ends,fixing accessories such as couplers, lock nuts, saddle pipe hook etc for 25 mm dia ISI Marked compete all as specified and as directed.

M&L for checking of faulty / jumped energy meter (three phase /single phase) with fixing of new energy meter in series and after one week submmitted meter reading report of both energy meter in engr in charge office all as specified and directed.

S&F AC Single Phase Static Energy meter of Accuracy Class 1.0, rating 5-30A, 240V, 50Hz only kWh Compact Meter with Pilfer Proof Meter box with Sealing Screw Provision (LCD Mni) complete all as specified and directed.

S&F AC Three Phase Static Energy meter of Accuracy Class 1.0, 3 X 240V, 50Hz, with Backlit LCD Display of rating 10-60A. (Measures & displays kWh) compete all as specified and as directed.

Taking down defective Geyser of capacity 25 ltrs from its existing position duly disconnected inlet/outlet water connection and opening up geyser for checking old defective parts and replaced the defective parts which required for repairing including testing and commissioning the same after successful repairing complete including refixing the same on its existing position and making connection inlet/outlet water connection complete all as specified and directed. Note : The spares required for servicing the geyser shoud be paid seperately under releveant item of the schedule.

S&F in replacement Thermostat suitable for 25 and 50 litres capacity Geyser any make/type complete all as specified and directed.

S&F in replacement Heating element 1.5 KW/2 KW ISI marked for 25 and 50 litrs capacity Geyser any make/type complete all as specified and directed.

S&F in replacement Chromium Plated Pipe for Hot and Cold water as per suitable length 12mm dia with two brass adopter and connecting up complete all as specified and directed.

S&F in replacement gasket for 25/50 capacity Geyser complete all as specified and directed.

S&F in replacement indicating lamp suitable for 25/50 ltrs Geysers complete all as specified and directed.

S&F inner tank made out of cast copper alloy, ISI Marked, suitable for any type, any make geyser, for the 25 Litre capacity complete all as directed.

S&F Metallic Outer cover including bottom and top cover duly painted suitable for 25 Litre capacity geyser complete all as directed.

M&L for repairs to 25 Litre geyser metallic inner tank, arresting the leakage by welding, brazing etc, pressure testing after repairs, complete all as directed.

S&F pressure/air release valve suitable for any type any make geyser made out of brass 15 mm complete all as specified and as directed.

S&F Non-return valve, made out of brass 15 mm bore, complete all as specified and as directed.

S&F Non-return valve, made out of brass 25 mm bore, complete all as specified and as directed.

S&F geyser safety valve of any type complete all as specified and as directed.

S&F vertical type Geyser (Water Storage Heater) 25 litres, 230 volt., 50 Hz, working pressure 0.8 Mpa with storage tank of mild steel material 5 star rating including necessary grouting complete all as specified and directed. Make : V-Guard Cat Part No. SPRINHOT PLUS / Havells / Bajaj / Racold or equivalent manufacturers mentioned in list of manufacturers complete all as specified and as directed.

Material, labour, transport and tools for rectification of urgent nature water supply complaints at Naval Base as and when required C Area, Naval Base Kochi) during all working day ,sunday/ holiday /off hours on all working days all as directed. NOTE:- (i) The material incorperated for completion of work will be measured and paid seperately under relevent item. (ii) The contractor should display contact number at C Area, Naval Base Kochi to register users complaint. (iii) The recovery of rupees 400/- complaint will be chargeable if contractor fails to attend complaint.

M&L for scrubbing cleaning, thoroughly removing all scale and dirt, mud sediments, silts etc from the internal surfaces of HDPE storage tanks (bottom and wall) by using brushes, bleaching powder and other cleaning materials as required including writing the words " DATE OF CLEANING" in capital letters of suitable size on outside visible place of with synthetic enamel paint(white) over black back ground of tank capacity up to 500 ltrs capacities compete all as specified and as directed.

All as per item No. 149 here-in-above, but 1000 litres capacity compete all as specified and as directed.

All as per item No. 149 here-in-above, but 2000 litres capacity compete all as specified and as directed.

All as per item No. 149 here-in-above, but 5000 litres capacity compete all as specified and as directed.

All as per item No. 149 here-in-above, but 10000 litres capacity compete all as specified and as directed.

S&F in replacement on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 40 mm dia including taking down old one complete all as specified and directed.

All as per item No. 154 here-in-before but of size 25 mm dia

All as per item No. 154 here-in-before but of size 20 mm dia

S/F in replacement CPVC Ball Valve of size 40 mm dia suitable for CPVC pipe incl necessary fittings and taking down old one complete all specified and directed.

S/F in replacement CPVC Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings and taking down old one complete all specified and directed.

S/F in replacement CPVC Ball Valve of size 20 mm dia suitable for CPVC pipe incl necessary fittings and taking down old one complete all specified and directed.

S/F in replacement float valve synthetic(PVC) of size 40 mm dia high pressure with polythene ball of size 6" dia and flynut including taking down old one complete all as specified and directed.

S/F in replacement float valve synthetic(PVC) of size 25 mm dia high pressure with polythene ball of size 6" dia and flynut including taking down old one complete all as specified and directed.

S/F in replacement float valve synthetic(PVC) of size 20 mm dia high pressure with polythene ball of size 6" dia and flynut including taking down old one complete all as specified and directed

S&F in replacement rotate and lock type cover for over head water tank (HDPE) of capacity 200 Ltrs including taking down old unserviceble tank cover compete all as specified and as directed.

S&F in replacement rotate and lock type cover for over head water tank (HDPE) of capacity 500 Ltrs including taking down old unserviceble tank cover compete all as specified and as directed.

S&F in replacement rotate and lock type cover for over head water tank (HDPE) of capacity 1000 Ltrs including taking down old unserviceble tank cover complete all as specified.

S&F in replacement rotate and lock type cover for over head water tank (HDPE) of capacity 2000 Ltrs including taking down old unserviceble tank cover compete all as specified and as directed.

S&F in replacement roatate and lock type cover for over head water tank (HDPE) of capacity 5000 Ltrs including taking down old unserviceble tank cover compete all as specified and as directed.

S&F in replacement roatate and lock type cover for over head water tank (HDPE) of capacity 10000 Ltrs including taking down old unserviceble tank cover compete all as specified and as directed.

M&L for two coats of colour wash on water tank staging including complete removel of existing treatment by using steel wire brushes or steel scrapers and shall be washed with clean water before apply of colour wash at any height compete all as specified and as directed.

S&F CPVC tank connector of size 32 mm dia compete all as specified and as directed.

S&F in replacement of rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 500 liters incl taking out u/s old one compete all as specified and as directed.

All as per item No. 171 above but 1000 ltr cap.

All as per item No. 171 above but 2000 ltr cap.

All as per item No. 171 above but 5000 ltr cap.

All as per item No. 171 above but 10000 ltr cap.

S&F in replacement of Loft water storage tanks (Rectangular with closed top) an elite plastic loft tank manufactured with “Bi-Axial Rotational Moulding" hoisted & fixed in position of capacity 200 litre compete all as specified and as directed.

S&F in replacement PVC connection pipe 16mm dia (outer 450mm long cold water and taking down old one complete with brass union on both sides to suit 15mm GI pipe compete all as specified and as directed.

S&F in replacement of bib tap Chromium plated (CP), half turn with flange and areator, fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI/cpvc pipe of size 15mm compete all as specified and as directed. Make : Cera cat Part No F2004151 or equivalent make from the approved list of manufactures.

S&F in replacement of bib tap Chromium plated (CP),half turn with flange and areator, fancy type long body cast copper alloy with crutch or butterfly handle screwed for GI/cpvc pipe of size 15mm compete all as specified and as directed. Make : Cera cat Part No F2004152 or equivalent make from the approved list of manufactures.

S&F in replacement of Chromium plated (CP) bib cock short body with flange and nozzle for garden/wahing machine of size 15mm compete all as specified and as directed. Make : Cera Model No F 2003153 or equivalent make from the approved list of manufactures.

S&F in replacement of two way bib cock ,half turn with flange and areator of size 15mm compete all as specified and as directed. Make : Cera Model No F 2004163 or equivalent make from the approved list of manufactures.

S&F in replacement concealed stop cock regular body, half turn with flange chromium plated CP cup fancy type of size 20mm compete all as specified and as directed. Make : Cera Model No F 2004351 and F4050502 or equivalent make from the approved list of manufactures.

S&F 15mm angle valve, half turn with flange, with flange type chromium plated for fixing with CPVC pipe compete all as specified and as directed. Make : Cera Model No F 2004201 or equivalent make from the approved list of manufactures.

S&F in replacement of swivel overhead shower (minimum weight 40grams) of PTMT any colour with shower arm (minimum weight 40 grams) 15mm size, 195mm long with bend of 45 degree with flange for fixing with CPVC pipe compete all as specified and as directed.

S&F in replacement health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe compete all as specified and as directed. Make : Cera Model No F 8030102 or equivalent make from the approved list of manufactures.

S&F shower/ health faucet wall holder, brass chromium plated 20mm size compete all as specified and as directed. Make : Cera Model No F 8070102 or equivalent make from the approved list of manufactures.

S&F in replacement pillar taps, half turn with areator, cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed for 15mm bore pipe compete all as specified and as directed.

S&F in replacement clinical bib cock long body with flange, areator and long handle screwed for GI/cpvc pipe of size 15mm compete all as specified and as directed. Make : Cera Model No:F 9030152 or equivalent make from the approved list of manufactures.

S&F in replacement CP angle cock,Self closers Pressmatic with wall flange and 200 mm connecting pipe for urinal pots to fixed in 15/20 mm pipe compete all as specified and as directed. Make : Cera Model No:F 9020203 or equivalent make from the approved list of manufactures.

S&F in replacement wall mixer (3- in - 1) with arrangment of both Telephonic shower and over head shower with 210 mm long bend pipe compete all as specified and as directed. Make: Jaquar Model No:COP 281PM or equivalent make from the approved list of manufactures.

S&F in replacement Kitchen sink cock quarter turn wall mounted with swivel spout not less than 150 mm and wall flange complete all as specified and as directed. Model No: F2004251 of CERA or equivalent make from the approved list of manufactures.

S&F in repair Plug top 15 amp 230 V, complete all as directed.

M&L for cutting chasses on walls floor etc not exceeding 10cm girth and making good the disturbed surface to match with the existing after removing the existing concealed pipe/laying new pipe, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness, (below or above ground level) complete all as specified and directed.

M&L for Plain Cement Concrete 1:3:6 (Type C-2) using 40mm graded stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed.

S&F in repair PVC sheathed , multi stranded copper conductor, 3 core , flexible cable , 1100 V grade, 2.5 sqmm, Ac connecting complete all as directed.

S&F fusible plug made out of brass with internal or external threading suitable for any type, any make geyser of 25 Ltr complete all as specified and as directed.

S&F heavy spindel of size 15 mm dia complete all as specified and as directed.

S&F normal spindel of size 15 mm dia complete all as specified and directed.

S&F wall mixer spindel of size 20 mm dia complete all as specified and directed.

S&F concealed cock spindel of size 15 mm dia complete all as specified and directed.

S&F wall mixer knob of suitable size complete all as specified and directed.

S&F regrative pressure booster pump of cap 0.5HP/ 0.37KW pressure setting range 1.5 to 25 Kg/cm. Tank capacity 1 Ltrs, rust preventive aluminium die casted motor body fitted with hot water seal, F-class insulation, suitable for hot water application all as specified and directed. Cat Part No. VB1-H1S of V-Guard or Kirloskar, Crompton.

Bell Builders (BID ID -3377393)

ZOOM ENTERPRISES (BID ID -3377064)

ANIE JOHN CONTRACTORS (BID ID -3377134)

HEAVEN ENGINEERS AND CONTRACTORS (BID ID -3376782)

MS BUILDERS (BID ID -3377501)

AR Traders (BID ID -3377759)

Super Constructions (BID ID -3377468)