Supply, Erection, Testing and Commissioning of 2 nos. of 220KV Feeder Bays on EPC basis excluding civil works at 220KV Virpore SS under Navsari Circle for Virpore-Navapura TSS line 1 & 2 for deposit work of M/s Western Railway under Open Access (Option-1A)

complete the job shall be included and shown in technical bid.

2)*Ethernet switches shall have as many spare ports as utilized ports.

3) ** PLCC / FOTE BCU shall have sufficient I/Os as per given list considering future lines also.

4) Contractor shall be responsible for necessary co-ordination with FOTE and OPGW supplier & erection agency

to establish remote connectivity and over all operation from Master Control Centre through SCADA system.

5) @ Communication channel between C & R Panel Relays and FOTE Panel ports with required LIUs in both

Panels is in scope of bidder. Separate Armoured F.O. cable for each relays shall be laid between C & R Panel

and FOTE Panel.

PROTECTION BOQ - under deposit work for erection of 02 Nos. of 220kV TSS Feeder Bay at 220kV

Sr. Erectio Supply

Particulars of Item Unit

No. n Qty. Qty.

Supply, Erection, Testing and Commissioning of Protection equipments and materials as per

A respective technical specifications and relevant special conditions and suitable for One Main and

One Main cum Transfer Bus system on 220kV side

Control & Relay Panels (having IEC 61850 compliant IEDs) for 220kV Bays (Control Voltage - 220V DC )

as per tech specifications with following break up

1) Control & Relay panel for line with Distance protection relays as Main-I & Main-II Set 2

2) Control & Protection panel for Transformer with Differential Set 0 -

3) Control & Protection panel for TBC Set 0 -

4) Control & Protection panel for BC cum TBC Set 0 -

Busbar Protection Augmentation Augmentation of existing Numerical Busbar

protection scheme Siemens Make 7SS522 by providing 02 Nos. of Busbar Bay units (Siemes Make

7SS523 compatible with existing CU & PU) along with all required accessories and installation, testing

commissioning of complete Busbar protection scheme in all respect.

[CU is mounted in one of the existing bay control & protection panel while PUs shall be mounted in

respective bay control and protection panels as shown in panel GA drawing]

3 GPS based Time Synchronising Unit (IEC 61850 compatible) Set 0 -

GETCO/E/2S-250/220kV VIRPORE SS/BOQ/R0, DT-22.07.2024 Page 3 of

SWITCHYARD BOQ FOR 220KV VIRPORE SUBSTATION:- (FOR 2 NOS.220KV NAVAPUR-TSS BAYS)

SCOPE OF WORK:-

1) 2 NOS. 220KV NAVAPUR-TSS FEEDER BAYS ADDED OF M/S WESTERN RAILWAY BY OVERHEAD LINE i.e 1 NO. BAY ADDED IN EXISTING

220KV BUS ARRANGEMENT AT ADJOINING OF EXISTING 220KV ACCHALIYA LINE-1 BAY & 1 NO. BAY ADDED BY 220KV BUS EXTENSION .

2) PROP. LINE FLYOVER FOR 220KV FUTURE LINE-1 .(i.e- 3 Phase bay cosider )

Sr. Erectio Supply

Particulars of Item Unit

No. n Qty. Qty.

Supply, Erection, Testing and Commissioning of Protection equipments and materials as per

B respective technical specifications and relevant special conditions and suitable for Two Main Bus

system on 66kV side

Control & Realy panels for 66kV Bays ( Control Voltage - 220V DC ) as per tech specifications with LED

type Semaphore & suitable for AIS switchgear modules with following break up

1) Control & Relay Panel for 66kV lines Set 0 -

2) Control & Relay Panel for Transformer With Differerential Relay (For 66/11kV Transformer) Set 0 -

3) Control & Relay Panel for Transformer W/O Differerential Relay (For 220/66kV TRF) Set 0 -

4) Control & Relay Panel for BC Set 0 -

5) Control & Relay Panel for Capacitor bank Set 0 -

6) Under Frequency Panel** Set 0 -

Supply, Erection, Testing & Commissioning of General purpose equipments and materials as per

C respective technical specifications and relevant special conditions and suitable for Two Main and

One Main cum Transfer Bus system on 220 kV side and Two Main Bus system on 66kV side

1 DCDB-220 V with 35 Feeder No. 0 -

2 DCDB-220 V with 20 Feeder No. 0 -

3 DCDB-220 V with 20 Feeder No. 0 -

4 LTPB (SCADA compatible) No. 0 -

Supply, Installation, Testing and Commissioning of materials/item for Power Cable and Control

Cable including preparation of wiring schedule

Supply and Laying of 1.1 kV PVC armoured copper/Aluminium control/LT power cable in trench including

binding/clamping of cable with PVC lockable wire tie as per requirement including supply and fixing of

identification tags at both ends and at distance of every 100mtr.

(Note :- Aluminium cables of size 185 mm2 & above shall be XLPE type)

1) 2c x 2.5 mm2, armoured copper control cable # Mtr. 350

2) 2c x 4 mm2 , armoured copper control cable # Mtr. 400

3) 4cx2.5 mm2, armoured copper control cable # Mtr. 650

4) 4c x 4 mm2 , armoured copper control cable # Mtr. 800

5) 7c x 2.5 mm2, armoured copper control cable # Mtr. 150

6) 12c x 2.5 mm2, armoured copper control cable # Mtr. 280

7) 12c x 4 mm2, armoured copper control cable # Mtr. 400

8) 19c x 2.5 mm2 , armoured copper control cable # Mtr. 650

9) 27c x 2.5 mm2, armoured copper control cable # Mtr. 100

10A) 1 x 50 mm2 , armoured copper cable Mtr. 0 -

10B) 4C x 10 mm2 , armoured copper control cable Mtr. 0 -

11) 4 x 10 mm2 , Al. armoured LT cable Mtr. 0 -

12) 3.5 x 25 mm , Al. armoured LT cable# Mtr. 150

13) 3.5 x 50 mm2 , Al. armoured LT cable Mtr. 0 -

14) 3.5 x 120 mm2 , Al. armoured LT cable Mtr. 0 -

15) 1C x 150 mm2 , Al. armoured LT cable Mtr. 0 -

16) 1C x 240 mm2 , Al. armoured LT cable Mtr. 0 -

17) 1C x 300 mm2 , Al. armoured LT cable Mtr. 0 -

18) 3.5 x 300 mm2 , Al. armoured LT cable Mtr. 0 -

Termination of the Control and Power cable at panel / MK box/equipment including PVC binding, dressing,

shaping, drilling of holes in panels for glands nuts, providing of glands for following size. The work also

includes looping in Panel and MK box by using crimping type lugs of suitable size with ferruling (machine

2 printed) with proper size of copper cable wire. The loops should be bunched by using button tape and proper

1) cables from 2 core to 7 core of 2.5 & 4.0 Sq.mm size# No. 150 -

2) cables above 7 core # No. 100 -

Laying of 1.1kv PVC/XLPE armoured Al. LT power cable in ground by digging trench of suitable width and

450 mm depth with providing and fixing of brick and sand layer covering the cable in any type of soil and

Laying of 1.1kv PVC armoured copper control cable in heavy duty PVC pipe of suitable size buried in

3 ground by digging trench of suitable width and 450 mm depth in any type of soil including supply and fixing

of Pipe and identification tags at distance of every 100 Mtrs for following size

1) Control Cables upto 7 core # Mtr. 200 -

2) Control Cables above 7 core and all LT cables # Mtr. 350 -

GETCO/E/2S-250/220kV VIRPORE SS/BOQ/R0, DT-22.07.2024 Page 4 of

SWITCHYARD BOQ FOR 220KV VIRPORE SUBSTATION:- (FOR 2 NOS.220KV NAVAPUR-TSS BAYS)

SCOPE OF WORK:-

1) 2 NOS. 220KV NAVAPUR-TSS FEEDER BAYS ADDED OF M/S WESTERN RAILWAY BY OVERHEAD LINE i.e 1 NO. BAY ADDED IN EXISTING

220KV BUS ARRANGEMENT AT ADJOINING OF EXISTING 220KV ACCHALIYA LINE-1 BAY & 1 NO. BAY ADDED BY 220KV BUS EXTENSION .

2) PROP. LINE FLYOVER FOR 220KV FUTURE LINE-1 .(i.e- 3 Phase bay cosider )

Sr. Erectio Supply

Particulars of Item Unit

No. n Qty. Qty.

“Supply, Erection, Testing and Commissioning of Modular Variable-diameter Cable sealing system as per

respective technical specification and relevant special conditions wherever the electrical / instrumentation /

communication / LT Power cable underground and over-ground enter or leave bay kiosks / control room of

substations / cable trench / basement.

Nos. of Module to be supplied per cable entry in yard kiosk as well control room shall be as mentioned in

tender drawing No. GETCO / E / 2S-250 / P-033.*

Providing and fixing of suitable BOX type GI perforated tray with necessary clamps and couplings for control

cable of CT/PT/CVT etc. equipments including fixing with structures up to plinth level as per instruction of

Engineer-in-charge.

2) 220 kV Switch Yard Mtr. 50

3) 66 kV Switch Yard Mtr. 0 -

4) 11kV Switch Yard Mtr. 0 -

Providing and fixing of suitable BOX type GI perforated tray with necessary clamps and couplings for control

cable of CB, Isolator, Earth Switch etc. equipments including fixing with structures up to plinth level as per

instruction of Engineer-in-charge.

2) 220 kV Switch Yard Mtr. 50

3) 66 kV switch yard Mtr. 0 -

4) 11kV Switch Yard Mtr. 0 -

5 Providing and fixing bay MK as per tech spec No. 2

Providing and fixing Yard LT ACDB as per tech spec -with 20 OG feeders (to be provided in 220 kV & 66 kV

7 Providing and fixing Yard LT ACDB as per tech spec -with 12 OG feeders No. 0 -

8 Providing and fixing of CT-PT/CVT JB as per technical specification

1) PT JB (220kV - 2 no., 66 kV - 2 no., 11kV Yard - 1 no.) No. 0 -

2) CT JB (66 kV - 12 no., 11kV Yard - 1 no.) No. 0 -

3) CVT JB (For 400 kV Line) No. 0 -

1.# The quantities of control and power cables shown in the BOQ are based on typical cable philosophy. Hence, the

2. All the cables shall be laid through minimum possible route and accordingly the quantity of cables shall be calculated and

3* The cable sealing system Module quantity & Frames are standadized as per O.N.No : GETCO/CE(Engg)/V/C /O-006881

FOTE BOQ for requirement of 2 x 25kV, 3- Pahse Power Supply for existing Navapur TSS at 220kV system instead of

Line Detail: 220kV Virpur ( GETCO S/S) to Navapura, overhead line with OPGW of 36 KM length

Sr.N Description Unit

SDH FOTE - STM-1 system with following configuration, Approved Make: 1) ABB India Ltd, Package

(A) FOTE: FOX 615 & Teleprotection: NSD 570 and 2) GE T&D India Ltd, FOTE : e-

terragridcom e-DXC & Teleprotection: e-terragridcom DIP

19" Rack with dual power input & 8 Ports of 10/100 BaseT Fast Ethernet with L2 switch Nos

1 functionality & interface for 8 E1 ports with engineering order wire phone.(Make & Model: Matrix

2 Power Supply card(-48VDC)

2a 220V DC to -48V DC Converter (Depending on sub-station Voltage) Nos

2b 110V DC to -48V DC Converter (Depending on sub-station Voltage)

3 Control Card with alarm cables and terminal Nos

4 4 Port STM-1 OLTE Nos

Optical SFP ( i.e S1.1, L1.1,L1.2,U1.2, V1.2/X 1.2 etc including other SFPs which require to meet

4a configuration & confirming to ITU-T standard) ,Optical Boosters, Optical wave length translator,

Pre amplifier etc.

GETCO/E/2S-250/220kV VIRPORE SS/BOQ/R0, DT-22.07.2024 Page 5 of

SWITCHYARD BOQ FOR 220KV VIRPORE SUBSTATION:- (FOR 2 NOS.220KV NAVAPUR-TSS BAYS)

SCOPE OF WORK:-

1) 2 NOS. 220KV NAVAPUR-TSS FEEDER BAYS ADDED OF M/S WESTERN RAILWAY BY OVERHEAD LINE i.e 1 NO. BAY ADDED IN EXISTING

220KV BUS ARRANGEMENT AT ADJOINING OF EXISTING 220KV ACCHALIYA LINE-1 BAY & 1 NO. BAY ADDED BY 220KV BUS EXTENSION .

2) PROP. LINE FLYOVER FOR 220KV FUTURE LINE-1 .(i.e- 3 Phase bay cosider )

Sr. Erectio Supply

Particulars of Item Unit

No. n Qty. Qty.

5 Optical Fibre Patch cords (10 mtrs) Nos

Stand alone Teleprotection equipment with 8 Nos. Tx & Rx independent command inputs &

6 outputs (4 commands/card) for interconnecting with Relay of DPS along with suitable interface Nos

for integrating with multiplexure on E1 port of interface at SDH level.

7 8 Port 10/100 BaseT Fast Ethernet Card + 1 GbE+ L2 switch Nos

8 Fully Wired Cabinet for FOTE with engineering order wire phone Nos

(B) Mandatory Spares for FOTE Sets

1 Power Supply card(-48VDC) Nos

220V DC to -48V DC Converter or 110V DC to -48V DC Converter (Depending on sub-station Nos

2 Control Card with alarm cables and terminal Nos

3 4 Port STM-1 OLTE Nos

Optical SFP ( i.e S1.1, L1.1,L1.2,U1.2 including other SFPs which require to meet our

4 configuration & confirming to ITU-T standard) ,Optical Boosters, Optical wave length translator,

Pre amplifier etc.

5 Optical Fibre Patch cords (10 mtrs) Nos

Stand alone Teleprotection equipment with 8 Nos. Tx & Rx independent command inputs &

6 outputs (4 commands/card) for interconnecting with Relay of DPS along with suitable interface Nos

for integrating with multiplexure on E1 port of interface at SDH level.

8 Port 10/100 BaseT Fast Ethernet Card + 1 GbE+ L2 switch

C Erection, Installation, testing & Commissioning of FOTE No.

Make & Model of FOTE Equipment at both Sub-station end shall be same.

(1) LCT (Local Craft Terminal- Laptop) with EMS software shall have to be supplied by Manufacturer free of

cost for local as well as remote configuration of FOTE equipment.

OEM will have to submit confirmation in written for following.

(1) The bidder shall furnish the copies of valid type test reports for the offered equipment from NABL

accredited Laboratory or KEMA type tested.

(2) The bidder should have to confirm for guarantee of 5 years from the date of receipt of equipment in store

in good condition or three years from the date of commissioning of offered FOTE (Operational for

Speech+DATA+Protection + Remote SCADA over OPGW) at respective Sub-station which ever will be

(3) The bidder should have to confirm the service and spares support for at least 10 years after the

guarantee period.

(4) Make & Model of FOTE Equipment at both Sub-station end shall be same.

GETCO/E/2S-250/220kV VIRPORE SS/BOQ/R0, DT-22.07.2024 Page 6 of

SWITCHYARD BOQ FOR 220KV VIRPORE SUBSTATION:- (FOR 2 NOS.220KV NAVAPUR-TSS BAYS)

SCOPE OF WORK:-

1) 2 NOS. 220KV NAVAPUR-TSS FEEDER BAYS ADDED OF M/S WESTERN RAILWAY BY OVERHEAD LINE i.e 1 NO. BAY ADDED IN EXISTING

220KV BUS ARRANGEMENT AT ADJOINING OF EXISTING 220KV ACCHALIYA LINE-1 BAY & 1 NO. BAY ADDED BY 220KV BUS EXTENSION .

2) PROP. LINE FLYOVER FOR 220KV FUTURE LINE-1 .(i.e- 3 Phase bay cosider )

Sr. Erectio Supply

Particulars of Item Unit

No. n Qty. Qty.

(3) The bidder should have to confirm the service and spares support for at least 10 years after the

guarantee period.

(4) Make & Model of FOTE Equipment at both Sub-station end shall be same.

Description of Material Unit n qty

1 220kV ,4400PF CVT (having two windings with VA burden 50 & 50 and

accuracy of 0.2 & 3P class for metering & Protection core respectively.The

arrangement of metering core shall be provided in seperate sealable

compartment with locking facility. Clamp/connectors, porcelain insulator & nos 2

supporting structure shall also be supplied.

GETCO/E/2S-250/220kV VIRPORE SS/BOQ/R0, DT-22.07.2024 Page 7 of