SPECIAL REPAIR TO BUILDING NO. P-3 (SQUASH COURT) AT INS DWARKA, OKHA AND PROVISION OF STABILIZER FOR NAVAL COMMUNICATION NETWORK CENTER AT NAVAL BASE OKHA UNDER GE NAVY PORBANDAR

Amount

Demolition of stone/boulder masonry, built in cement mortar incl coping etc all as specified and as directed by Engr-in-Charge.

M&L for walling of Porbandar stone masonry well bonded and solidly hearted built in CM 1:6 complete all as specified .

Taking down cement plaster, any description on brick or stone walls, etc. including raking out joints, hacking for keys, scrubbing down with water, etc. and rubbishing off the premises, etc. complete

M&L Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, Complete all as specified and directed.

M & L Rendering 15 mm thick in CM (1:4) on stone/concrete surface of external walls finished even & smooth with using extra cement incl using integral WPC etc complete (integral WPC will be measured separately.

M & L Rendering 5 mm thick in CM (1:3) on concrete surface of ceiling finished even & smooth without using extra cement etc complete

Supply only integral waterproofing compound

M&L for preparing of newly plastered surface of walls and applying one layer 1 mm of white wall care putty and two coats of oil bound distemper over a coat of primer etc complete

M&L for Preparation of new plastered surfaces in walls soffits, facia roof and applying Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. at any height including necessary scaffolding etc complete all as specified and as directed by Engr-in-Charge of weather coat primer all as specified.

M&L peparation of newly plastered surfaces of ceiling and applying three coat of white wash all as specified.

Complete removal of existing treatment of wall ( any no. of layers) and making surface even and smooth to receive two coats of anti fungal weather proof acrylic based paint 100% acrylic over coat of exterior wall primer after preparation of surface of at any height including necessary scaffolding etc. complete all as specified and as directed by Engr-in-Charge

M&L for complete removal of existing treatment with mechanical scrubber on old plastered or un-plastered surfaces of walls and applying two coats of oil bond distemper over 1 mm Birla/JK white putty on walls complete all as specified and directed.

Taking down chowkhats (without taking off shutter) exc 1.5 sqm but n exc 4 sq. m each

Taking down chowkhats (without taking off shutter) not exc 1.5 sqm each

Taking down aluminium windows/ door frames incl shutters (without taking off shutter) complete of size n exc 1.5 sqm area all as specified

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails MS frameshall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain cover PVC sheets for top rail, lock rail and bottom rail on either side and as gap insertfor top rail and bottom rail, panelling of plain of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles, and rails with suitable PVC sheet beading and joined together with solvent cement supplying l and fixed in the frame at site as per specification and drawing.

S & F 2nd class HW rail and style 35 mm Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S & F Stainless Steel butt hinges 100mm size medium weight cold rolled mild steel

S&F 100mm Butt hinges(Size of hinges in mm), medium weight, cold rolled, stainless steel ISI marked, and fixed all as specified.

S & F 300mm long aluminium alloy anodised sliding door bolts complete complete all as specified and directed.

S&F 150mm long (Length of Bolt in mm) Aluminium anodised,barrel tower bolts of extruded section and fixed all as specified and directed.

S&F150mm (Size of Handle in mm) Extruded aluminium alloy handles, fabricated type,anodised all as specified.

S&F in repairs Aluminium (Extruded Section Body) Door closer hydraulically regulated,designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified.

S& F powder coated aluminium frame and shutters for doors, windows, ventilators with one or more rebates including joining cleat and necessary fitting (handle, locking arrangement, stoppage) for fixing etc (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F 4.8mm thick Sheet glass, ordinary quality with and including neoprene beadings in square nexc 0.5 sq.m in each pane as specified and directed.

S&F 5.5mm thick Sheet glass, ordinary quality with and including neoprene beadings in square nexc 0.5 sq.m in each pane as specified and directed.

M & L in repair aluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm all as specified

Demolition of PCC in ground floors and pavings n exc 15 cm thickness (below or above round level)

Demolition of RCC in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L Plain Cement concrete 1:2:4 type B-2( 40 mm graded aggregate) 75mm thick as in plinth protection finished even and fair.

M&L for pre-cast reinforced cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) as in manhole cover with plain fair surface including chamfers, weatherings, throatings, necessary form work and set in CM (1:6), placed in position complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in copings, benching, and the like including weathering, sightly rounded or chamfered angles and throating alongwith necessary use&waste of formwork as directed.

M & L cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in base and mass concrete to be laid in required slope complete all as specified.

M & L for 75mm thick PCC 1:3:6 Type D-2 using 40mm graded stone aggregate as in sub bases all as specified & directed by Engineer-in-charge.

M&L for Concrete bed Type D2 1:4:8 to 150mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested

M & L cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified.

M & L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' in plinth protection

Dismantling boarding/ wooden flooring incl wood floor runner, any description, fixed in any position with nails

M&L for Wooden flooring made of kiln seasoned (moisture containt of approximately 14% at the time of dispatch), Treated Maple Wood finished with 20 to 24mm thick, 57 to 83 mm wide and in random length in tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with air pass groove and treated with special anti termite and water resistant lacquer. Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with anti-termite solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the two wings at 300 mm x 300 mm Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub floor before laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of 8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a thin coat of water based polish on the the face before executing the approved game line marking.

Dismantling floor, hearth or wall tiling including cement mortar bedding, and rubbish off the premisess complete all as specified and as directed

M&L for Light shade vitrified ceramic tiles, premium quality, coloured (of approved shade and design) area of each tiles not exceeding 0.36sqm,joint free, as in floors and skirtng, etc. set and jointed in neat cement slurry and joints grouted with pigment to match with shade ,laid over and including 15 mm thick screed bed in CM (1:6) complete all as spec and directed.

Ditto all as per item no above but in vertical surfaces such as skirting over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L for non-skid ceramic coloured tiles (of approved shade and design), 7to8mm thick, of superior quality, square / rectangular (area exceeding 0.11 Sqm but not exceeding 0.18 Sqm) joint free, as in floors, etc.set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match shade of tiles laid over & including 15mm thick screed bed in CM (1:4) complete all as specified and as directed

M&L for coloured Glazed ceramic tiles,of size 450x300x 7 to 8mm thick (approved shade and design) of superior quality fixed on vertical surfaces such as skirting / dado / risers of step etc.,set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles fixed over & including backing coat of 15mm thick plaster in CM (1:4) complete all as specified and as directed

Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar .

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) as in partitions, steps, jambs, pillars, window- cills,cooking platforms, working table and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

M & L for machine cut kota stone as in flooring, stair case landing. treads of steps etc, 20-25mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified including 15mm thick screed bed or bedding in cement mortar 1:6. all as specified nd directed

M & L for machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 1:4 cement screed and jointed

Taking up or down steel tubing of 20 mm bore and connections

Taking up or down steel tubing of 25 or 32 mm bore and connections

S&F in Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls,ceilings or in floors etc pipes incl cutting/chases of walls etc 25mm inclluding fitting (such as elbow teen reducers, couplers short pieces, connection uion etc) whatever required as per manufacturer's instruction fixed on wall /ceiling complete all as specified.

S&F in Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls,ceilings or in floors etc pipes incl cutting/chases of walls etc 32mm inclluding fitting (such as elbow teen reducers, couplers short pieces, connection uion etc) whatever required as per manufacturer's instruction fixed on wall /ceiling complete all as specified.

M & L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good for cutting exceeding 20cm girth

S&F Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc pipes incl cutting/chases of walls etc 20mm inclluding fitting (such as elbow teen reducers, couplers short pieces, connection uion etc) whatever required as per dmanufacturer's instruction fixed on wall /ceiling complete all as specified.

Dismantling of water storage tank of exc 500 ltrs & n exc 1000 ltrs capacity complete all as specified and as directed

S&F 1000 Ltrs Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed

S&F in repairs Vitreous China wash down water closet pan (European type) with P or S trap, white colour, fixing bolts, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete

S & F in repairs vitreous china wash hand basin white flat back size size 630x450mm incl 02 Nos angle iron bracket 40x40x5mm bracket CP waste coupling and 32mm dia PVC waste pipe, complete all as specified and direceted.

S&F in repairs Plastic water closet seat and cover, white, closed pattern with flat bottom, and mild steel chromium plated hinging device suitable for European WC all as specified and directed.

S&F in repair 10 litres PVC valveless, syphonic action type flushing cistern, with inlet ball valve, float and handleincloding brackets and PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified

S&F in repairs long shank CP Pillar taps 15 mm dia but fancy type, with capstan heads, screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for pvc pipe and fixed.

S&F in repairs bibtap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe 15mm bore chromium plated (fancy type) all as specified.

S&F in repairs CP Stop valves, crewed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F in repairs brass CP Health Faucet with 1.2 mtr long flexible tube and wall hook complete all as specified. Make: Jaquar/ Hindware/ Cera

S& F in repair SS soap dish of premium quality with complete fixing accesorises etc complete. Make: Jaquar/ Hindware/ Cera

S&F in repairs fancy type brass CP toilet paper holder, fixed to walls with screw etc complete .Make: Jaquar/ Hindware/ Cera

S&F in repairs fancy type Brass Chromium plated towel rail, 20mm dia, D type, 60cm long between flanges all as specified.

S&F in repairs PVC connection 600mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified.

S&F in repairs Grating square fitting of size 150mm made in two parts for smell and mosquito proofing with minimum 25 mm water seal of PTMT. (Minimum weight 85gms)complete all as specified.

S & F in repair designer looking mirror of size 1350 x900 mm with back lit and fixed on wall with brass fixing knob complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise described for of any description.

S&F for Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing(Beam, tee, angle, channel or flat section) including distance pieces, cleats, etc. Gde Fe 410-W (Gde-E-250) quality-A.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including ridge etc complete

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer all as specified.

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for suspended ceiling with prepainted calcium silicate board 10mm thick of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600x600mm, with aluminium snap grid framework and hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified.

M&L for preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts/scaffolding all complete as per direction of Engineer-in-charge.

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-in-charge complete in all respect. Epoxy bonding adhesive having coverage 2.20sqm/kg of approved make

M & L for providing and applying jacketing around columns,beams, including all necessary scaffolding, shuttering,drilling holes or welding to existing reinforcement and fixing shear anchor as per specification all complete .Note: Reinforcement shall be measured and paid separately

Providing and applying polymer based bonding coat of pagel U10 of PIDILITE/BASF/SIKA/FOSROC or Equivalent make on cleaned / washed surface of concrete and applying pre -packed polymer modified repair mortar pagel U10/U40 of PIDILITE / BASF / SIKA / FOSROC or Equivalant as per ASTM / BS standards having comp. strength of 45 MPa. min at 28 days, Adhesive bond not less than 02 MPa, Chloride content less than 0.05% & Flexuural Strength of 8mpa min at 28 days in all respect as per manufacturer's recomendations and relevant codes, including the required material, manpower, Application and tools & tackles all complete as per direction of the Engineer - in - charges.

Providing and fixing hard drawn steel wire fabric of size 25x25mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge.

Providing and laying in position Micro - Concrete as per relevant ASTM / BS / IS having comp. strength of min 45 mpa at 2 days of make PIDILITE/ BASF/SIKA/FOSROC or equivalent in columns and beams, which shall be pre-packed single component, chloride free, non shrink, free flow, self compacting and mixed as per manufacturere spacification, including required leak proof shuttering, pre - soaking of substrate, manual application or pumping, manpower and tools & tackles all complete as per direction of the Engineer - In - Charge.

M&L CRS reinforcement bars 10mm and over using cut to length bent to shape as required including cranking bending spirally for hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securig with clips etc complete.

Ditto as above item No 87, but 5mm dia and over upto and including 10mm dia in stirrups.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, manholes, etc. or for laying cables/pipes, erecting poles etc. n exc 10 sqm on plan and getting out in soft/ disintegrated rock complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, manholes, etc. or for laying cables/pipes, erecting poles etc. n exc 10 sqm on plan and getting out in Hard/dense soil complete all as specified and directed.

Removing of excavated mtrls n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed as in rock complete.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in hard dense soil

Demolition and breaking up drain pipes 150mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar in floors including excavation and removal of soil complete all as specified and directed

M&L for reinforced concrete pipe of 150mm bore of pipe, class NP-2, laid and jointed with collars complete all as specified and directed.

M & L Mild steel TMT bars 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Cutting into existing manholes of 150mm internal dia of pipes for connecting new drains, making good to pipe and rendering cutting out existing benching and forming branch channel in PCC (1:2:4) type B-1, smooth finished complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specially provided for.

M & L stone kerb of roughly squared stones of size 20cmx30cm dressed so that the maximum depression from straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20 mm for the rest of surfaces, jointed in cement mortor 1:6 and struck flush, including embedding stones in the ground to depths indicating and tamping ground around stones and also removing any surplus spoils, etc.

M&L for even spreading of 25mm thick layer of sand cushioning incl watering & consolidation all as specified & directed by Engineer-in-charge.

M&L for machine pressed precast concrete rubberised inter locking paver blocks any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new painted surfaces and applying two coat of synthetic enamel on brick, stone, concrete, asbestos cement or plaster surface all as specifed and directed.

Dismantling of cast iron or reinforced concrete drain pipes of dia 300 mm or more, jointed in cement mortar and taking out of trenches, if required

M & L for Cutting of bituminous/RCC road and sub-base WBM (any thickness) for laying of RCC drain etc complete

M & L for Reinforced cement concrete pipes 450mm, class NP3, laid and jointed complete with collars

M & L for Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete using extra cement including forms, moulds mitred / stopped ends etc

Taking down carefully aluminum/copper point wiring (light,fans,socket etc) complete incl battens and fittings such as switch, ceiling rose,light fittings, regulaters, socket etc and making good disturbed surface of wall/floor etc complete all as specified.

M&L for point wring for one light/ fan controlled by one switch with 1.5 sqmm nominal area) PVC insulated and PVC unsheathed multi stranded copper conductor cable FRLSH in and including concealed PVC conduit 20 mm dia medium duty ISI marked, including suitable new steel sunken boxes, modular frame and cover plate for fixing of modular switches as per required point in that board, flush to surface for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 sqmm copper conductor cable FRLSH connected to common earth duly complete including cutting, chasing the surface and then making good the same in CM 1:6 complete all as specified and directed. (Note : Switches, Sockets etc shall be measured and paid for separately under appropriate items of Sch 'A'

All as per item No 108.00 above but 5 amps socket outlet on same board board.

All as per item No 108.00 above but One 3 pin socket outlet, 5 Amps,independent borad complete all as specified andas directed.

All as per item No 108.00 above but One 3 pin socket outlet with 2.5 sqmm cable for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

Supply and Repair/Replacement of Modular switch 1 way 6 Amps, 1 modules 230 volts complete all as specified and directed.

Supply and Repair/Replacement of Modular switch 1 way 16 Amps, 1 modules 230 volts Complete all as specified and directed.

Supply and Repair/Replacement of Modular socket 6A, 2/3 pin combined, 2 modules 230 volts complete all as specified and directed.

Supply and Repair/Replacement of Modular socket 6A/16A, 2/3 pin combined, 2 modules 230 volts complee all as specified and directed.

Supply and Repair/Replacement of five step fan Modular regulator 2 module 230 volts complete all as specified and directed.

Supply and Repair/Replacement of ceiling rose surface backelite 65x50 mm having 3 terminal complete all as specified and directed..

M&L For breaking the existing wall to make hole for exhaust fan and making good to the disturbed surface of wall complete all as specified and directed at site.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed..

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and Repair/Replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and Repair/Replacement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

M&L for Repair/Replacement for Sub main wiring power/circuit using PVC insulated unsheathed FRLS, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through in and including PVC conduit concealed in walls/roof/floors all as directed by Engineer in Charge. Notes:- (i)Two wires of 4 sqmm and one wire of 4sqmm & PVC conduit shall be measured as one unit.

Supply and Repair/Replacement of Flood light fitting Endura pearl 200W LED type new genaration energy saving & environmental friendly long life with high power LED as lighting source and exclusive innovative die-cast aluminium flood light with highly efficient LEDs as light source, suitable for highlighting architectural features with IP65 protection and impect resistance of IK07and fixed on wall/Ceiling complete all as required and directed Make Havells Cat Part No. JETAVALOURFL200WLED757MODWBLTG or equivalent to Bajaj/ Wipro/ Surya.

Supply and Repair/Replacement of Building street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and Repair/Replacement of TP&N distribution board with double door vertical type TPN DB made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating,suitable for MCCB for capacity 63Amp, 16 KA, Incomer 4 ways 415 Volts made up of CRCA sheet with busbar rating 200 Amps Adjustable thermal (70% to 100%) & Fixed magnetic setting type including grouting in the wall, cutting & chasing etccomplete all as specified Cat par No.DHDPTVODRW04 opf Havells or equivalent to L&T/ABB

Supply and Repair/Replacement of MCB rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP of 5Amp -32Amp current carrying capacity in the MCB DB complete with connection testing and commissioning.complete all as specified and directed by Engineer - in - Charge.

Supply and Repair/Replacement of MCCB 4 Pole 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 25 KA complete all as specified and as directed.

M & L of earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr below the normal ground level with top edge of earth plate not less than 1.50 mtr below the normal ground level and connected to galvanised earth lead wire 4.0mm dia by means of nut, bolt & washer and protected by 40mm dia GI pipe light grade and watering pipe of 20mm dia GI pipes light grade and connected to earth test point including necessary excavation, earth work, PCC chamber (1:3:6) type C-1 and 40 mm thick RCC pit cover in RCC (1:2:4) type B-1 using 6 mm dia MS round bars @ 150 mm C/C both ways all as shown in electrical plate No. 3 of SSR Part-I all as specified and directed.

M & L Earth continuity conductor or main earthing lead of size 4.00mm GI wire fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm galvanised iron wire complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor 35 Sqmm 3.5 Core complete all as specified and as directed.

M & L for sand cushioning for LT cable laid in trenches using screened sand of approved quality as per SSR Part-I all as specified & directed.

S & F unreinforced pre-cast concrete cable covers class LV types 2 flat size 250mm x 150mm x 40mm including removal of old covers complete all as specified and as directed.

Supply and laying/jointing GI Pipe mideum grade 40mm dia with all fittings laid/fixed on wall/pole or under road/PCC crossing and all as specified and directed.

Making connection of CPVC distribution branch with GI main of following sizes by providing and fixing tee including cutting and making fusion joint etc.

Supply Repair/Replacement Laying and Testing of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fittings and making connection fixed complete to walls, ceilings floors or laid in trenches etc. of 32 mm dia laid in trenches complete all as specified and directed.

All as per above item No 136.00 but for 25 mm dia.

Supply and Repair/Replacement of CPVC ball valve 32 mm bore all as directed.

S&F in repair/Replacement of CPVC ball valve of 25mm dia as per requirement of the site complete all as specified and as directed.

Supply and Fixing of Voltage stablizer for automatic operation, three phase naturally oil cooled indoor type & designed for input variation between 340 V to 460 V with output voltage stabilized at 415 with accuracy + 2.5% and speed of correction 8 Volts per second and of capacity 160 KVA complete all as specified and directed.

Supply and laying/jointing GI Pipe light grade 80mm dia with all fittings laid/fixed on wall/pole or under road/PCC crossing and all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 240 sq mm 4 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core complete all as specified and directed.

M&L of earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr below the normal ground level with top edge of earth plate not less than 1.50 mtr below the normal ground level and connected to galvanised earth strip 32x6mm size by means of nut, bolt & washer and protected by 40mm dia GI pipe light grade and watering pipe of 20mm dia GI pipes light grade and connected to earth test point including necessary excavation, earth work, PCC chamber (1:3:6) type C-1 and 40 mm thick RCC pit cover in RCC (1:2:4) type B-1 using 6 mm dia MS round bars @ 150 mm C/C both ways all as shown in electrical plate No. 3 of SSR Part-I all as specified and directed.

Supplying and laying synthetic Rubber insulated mats 2.5 mm thick for voltage upto 11 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all as specified and directed.

JAY BHARAT METAL SUPPLIERS

J J ENTERPRISES