SPECIAL REPAIRS OF BLDGS NO 738 AND P 745 AT TK TPTR PL ASC AND OTHER SANCTIONED WORKS IN ARMY AREA UNDER GE ARMY NO 1 JODHPUR

Amount

Surface excavation not exceeding 30cm and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.

M&L for hard core broken stone of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, water and rammed to a true surface, with power roller, complete all as specified and as directed.

M&L plain cement concrete 1:3:6 type C-2 by using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete, concrete block for iron strut or post complete all as specified and as directed .

Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

M&L for textured finishedd external grade parking tiles of 30cmx30cmx10 mm thick, set, jointed and pointed in white cement and pigment match to colour, laid over and including screed bed or bedding layer of 15mm thick in CM 1:4 complete all as specified and as directed. Make :- Johnson ( Endura) or equivalent make as approved by GE.

M&L precast cement concrete (1:3:6) type C-1by using 20mm graded stone aggregate as in solid block masonry exceeding 10cm width and setting in cement mortar 1:6 complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint on new concrete surfaces of any description over 10 cm width or girth, over & including M&L a coat of primer including preparation of surfaces, complete all as specified and directed.

Taking down existing old tar-felt RCC roof treatment, and demolition of cement concrete (unreinforced) of any description and in any position not other wise specifically provided and removal unserviceable materials, debris and rubbish to a distance noexceeding 50 mtr & depositing where directed. complete all as specified and as directed

M&L for plain cement concrete 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate), as in roof padding over roof for making good depression / undulation to make the existing as filling in depression of roof slab, complete all as specified & directed.

M&L for PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in coping/ roof kerb, DPC, pier caps, bed blocks, for hold fast etc., including mixing with WPC and necessary form work, complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.

Removing excavated material (soil) not exceeding 50 meter and deposing where directed at a level not exceeding 1.5 meter here-in-above the starting point, complete all as specified and directed.

M&L for neat cement slurry @ 3.00 kg/Sqm and screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following as roof treatment complete all as specified and as directed : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 3.00mm having weight not less than 3.00 Kg/Sqm using torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen conforming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. (e) FIFTH COURSE : 40 mm thick plain cement concrete 1:2:4 (using 20 mm stone crushed aggregate) as in roof padding, including WPC as per manufacturer instruction.

M&L 75 mm thick PCC 1:4:8 type D-2 using 20mm graded crushed stone aggregate, as in sub base of floor/hard standing, incld. compaction properly & universal and laid to level, complete all as specified and directed.

Supply and laying machine / factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.

Excavation in post holes each not exceeding 0.5 cu.m, getting out in any type of soil, including returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed.

M&L for rolled mild steel sections as in main and cross beams,hip and jack rafters,purlins where connected to common rafters and guides for sliding doors,fixed with angle cleats or other connecting plates and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.

M&L for prepainted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strenght 550Mpa in roof coverings fixed with self tapping screws, complete all as specified and directed.

S&F mild steel frame work as in stairs ,hand rails half round or other stock section or section or core for wooden hand rail straight portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc hip ties for roof including securing bolts post and struts in fencing including securing bolts post and struts in fencing including cutting tops to shape as directed drilling holes nothing for wire etc flat iron fillet for necessary drilling bolting or riveting etc and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.

Preparation of new or previously untreated steel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over & including M&L a coat of red- oxide, zinc chrome primer complete all as specified and directed.

Preparation of new or previously untreated steel surface of any description, not exc 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over & including M&L a coat of red- oxide, zinc chrome primer complete all as specified and directed.

S&F for 5mm thick PVC wall panelling with grid to secure wall panneling at specified specing as per specification complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-2 by using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed .

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed .

M&L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations filling, sub base and mass concrete filling, etc, complete all as specified and as directed.

Returning filling in excavated soil, including spreading, leveling, watering and well ramming in layer n. exc 25 cm complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc.1.50 mtr above the starting point, complete all as specified and directed.

M&L for squared rubble walling, Jodhpur type, regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed.

Extra over stone walling for hammer dressing to face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints, complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes confirming to IS:1161-1979 Grade St-240 complete all as specified and directed.

S&F rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., complete all as specified and directed.

S&F rolled mild steel work confirming to Fe 410-W, Grade-E- 250, Quality-A as in plates [plain & chequered], channels, angles, square cut or notched [ordinary or counter sunk] forming holes without any attachment complete all as specified and directed.

M&L 40 mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in flooring/hard standing laid in alternative bays using glass dividing strips, complete all as specified and directed.

M&L for sand filling under floor or in foundations including watering and consolidation complete all as specified and as directed.

M&L for 25 mm thick cement concrete 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregate), to receive floor finishes, complete all as specified & directed.

M&L for glazed colour ceramic tiles (premium quality) of size 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 15mm thick backing coat in CM (1:6) complete all as specified and directed.

M&L Machine cut kota stone slab 20-25 mm thick (size not less than 580 mm X 580 mm) as in floor, treads(single piece for steps) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including M&L 15mm thick screed bed in CM 1:6, complete all as specified and as directed.

M&L Machine cut kota stone slab 18-20 mm thick as in riser of steps(single piece for steps), skirting, dado & pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including M&L 10mm thick backing coat in CM 1:4, complete all as specified and as directed.

M&L for non skid ceramic coloured tiles (premium quality) of size 6 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including M&L 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Taking down cement plaster on stone masonry, RCC verticle surfaces like column / pillar etc, dado surfaces etc complete including racking out joints, hacking for key scrubbing down with water, complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for 10 mm thick Rendering in CM 1:3 on fair faces of brick work or conc surfaces as in ceilings & finished even & smooth w/o using extra cement, complete all as specified and as directed.

M&L for Racking out joints/ pointing to squared rubble or polygonal rubble un-coursed or brought up to courses masonry built in cement mortar or cement lime mortar, coursed or un-coursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering complete all as specified & directed.

M&L keyed pointing in cement mortar (1:3) to squared rubble masonry regular coursed or un coursed complete all as specified & directed.

M&L for preparing new plastered or old plastered wall surfaces and applying 2 mm thick wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper on walls, complete all as specified and directed. Note -i)- Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures. ii)- OBD shall be in one or more colours/ shades all as approved by GE.

M&L for Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.

M&L for preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint over & including M&L a coat of white wash to match with the existing surface complete all as specified and as directed.

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area not exc 1.5 Sqm each, complete all as directed.

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm wood grain printed PVC Sheet on back face, Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 by using 20 mm graded stone aggregate as in bed block for fixing of hold fast complete all as specified and as directed.

Taking down of steel window and ventilators, complete all as specified and directed.

S&F factory made box type windows (steel) (BWM) with side hung shutter including cooler opening as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded, complete all as specified and directed. Note : Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.

All as per item No. 54.00 here-in-above, but without glazing bars, complete all as specified and directed.

S&F of box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete with glazing bars, complete all as specified and directed.

M&L for rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars ,barred iron doors; ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.

S&F glavanised steel wire cloth, 0.56mm nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tack or galvanised wire stapples complete all as specified and as directed.

S&F factory made solid panel PVC moulded door shutter 28 to 30 mm thick (stiles) , with 2, 4, 6 raised panel design with 2 mm thick moulded prelam PVC sheet on the front face & 2 mm thick plain colour PVC sheet on back face suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed.

S&F of stainless steel butt hinges 100mm size, include screws or bolts, nuts and washers to match the butt hinge, complete all as specified and as directed.

S &F of mild steel butt hinges 100mm size, complete all as specified and as directed.

S&F of mild steel barrel tower bolt 200 mm long stove enamelled black with bright bolt, complete all as specified and directed.

S&F Mild steel pressed handles 150mm size, oval type, stove enamelled black, pattern and design, complete all as specified and directed.

S&F of mild steel sliding door bolt 300 mm long stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on stapple plate, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incld punching or drilling out old glazing pins/ spring clips and provding and fixing new ones, complete all as specified and directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.

S&F for 4 mm thick figurred , pin headed glass ordinary quality & glazing with oil putty in square n exc 0.50sqm ineach pane, complete all as specified and directed.

M&L for preparation of new / old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed .

Taking up or down 15mm bore CPVC/steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.

All as per item No. 69.00 here-in-above, but size 20/25 mm bore

S&F 15 mm bore GI tubing medium grade, galvanized, with all fittings fixed to wall, ceilings or laid n floors, complete all as specified and directed.

All as per item No. 71.00 here-in-above, but size 20 mm bore

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, complete all as specified and directed.

S&F in replacement of bib cock with flange 15mm dia, chromium plated, cast copper alloy, fancy type, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S & F in replacement, brass chromium plated shower rose of size 125mm with or without swivel joints fixing to steel pipes complete all as specified and as directed.

S&F in replacement angular stop valves cast copper alloy chromium plated (ISI marked) screwed down high pressure fancy type screwed both ends for 15mm bore of iron pipe or union, complete all as specified and as directed.

S&F in replacement stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed, (ISI Marked) suitable for 20mm bore, complete all as specified and as directed.

S&F in replacement stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed, (ISI Marked) suitable for 25mm bore, complete all as specified and as directed.

S&F in replacement Pillar taps 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed.

M&L for 75mm outlet diameter PVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate), complete all as specified and directed.

S&F tubular towel rail 20 mm dia chormium plated brass 'D' type 600mm long with bracket fixed with chormium plated brass screws, complete all as specified and as directed.

S&F in replacement decorative type curtain rod stainless steel finish of pipe 22 to 25 mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end (as approved by GE).

M&L for machine cut sand stone slabs, 7.5 cm thick, Jodhpur pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 complete all as specified and directed.

S & F for vitreous china ware wash hand basin, white, flat back of size 300 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 300mm long complete all as specified and as directed.

S & F in replacement white vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests and PVC 'P' or 'S' trap, including M&L brackets, flush HDPE pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts & fixing arrangement of cistern, including provision of cement concrete bedding 1:5:10 type E2 complete all as specified and as directed.

Dismantling of cast iron of CI / PVC soil, waste & vent pipe jointed in cement mortor of size 110/100mm bore, incld. All fittings, complete all as directed

Dismantling of cast iron of CI / PVC soil, waste & vent pipe jointed in cement mortor of size 75mm bore, incld. All fittings, complete all as directed

Supply & laying 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches of suitable size complete all as specified and as directed .

Supply & laying 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches of suitable size complete all as specified and as directed .

S&F 75 mm bore (SWR) PVC bends any radius with oval access door complete all as specified and as directed.

S&F 110 mm bore (SWR) PVC bends any radius with oval access door complete all as specified and directed.

S&F of PVC (SWR) 110mm bore vent cowl complete all as specified and directed.

Supply only in replacement 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed.

M&L 50 mm thick plain cement concrerte 1:3:6 type C1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight in 2 mtr interval, complete all as specified and directed.

Removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster, padding,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . flushing at junction of parapets complete and removing the same to the places where directed

S&F rotational moulded polythene water storage tanks of 500 ltrs capacity, white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I with PTMT ball valve heigh pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms including dismantling old u/s tanks & removing to store or credit to contractor, complete all as specified and directed.

Supply only integral water proofing compound ISI Marked all as specified.

M&L precast cement concrete block masonry using PCC 1:2:4, type B-1 solid blocks, 10 cm thick and setting in cement mortar 1:4, straight or curved on plan exceeding 6 m mean radius complete all as specified and directed.

Demolition of stone / boulder masonry walling, built in cement mortar including all quoins, arches, pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and directed.

M&L 40 mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in flooring/hard standing laid in alternative bays using glass dividing strips, complete all as specified and directed.

Supply only 38mm wide and 3mm thick glass dividing strip complete all as specified & directed by Engineer-in-charge.

Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc, complete all as directed.

M&L for fixing TMT bar 12 mm dia by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc., complete all as specified and as directed.

M&L for cleaning the existing reinf of slabs, chajjas etc., & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface, complete all as specified and as directed.

M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack, complete all as specified and as directed.

M&L for 15-20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand ofover the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat, complete all as specified and as directed.

M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth without using extra cement, complete all as specified and as directed.

M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth, complete all as specified and as directed.

S&F GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjas/fascias etc., complete all as specified and as directed.

S&F MS chromium plated peg set of five fixing with wall, complete all as specified and as directed.

S&F Soap Dish, viterous china white, approximate size 160 x 160 x 90 mm, fixed with CP brass screws, complete all as specified and directed.

Use and waste of formwork to sides and soffits of slabs not exc. 200mm thick and suspended slab & its similar works fair finished surfaces of concrete, complete all as specified and as directed.

Form work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs not exc 20cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10cm but not exc 20cm wide with fair finished surfaces, complete all as specified and as directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces, complete all as specified and as directed.

M&L reinforced cement concrete type B-1 [Nominal Mix] 1:2:4 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L of RCC nominal mix type B-0 (1:2:4) using 12.50 mm agg as in beam in stone masonary/ block masonary or as in lintel over 1.50 m span.complete all as specified and as directed.

S&F TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam, slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clip, complete all as specified and as directed.

S&F TMT bar 5 mm dia and over upto and including 10mm dia as in stirrups cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam etc., hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clip, complete all as specified and as directed.

Demolition of reinforced cement concrete including cutting to reinforcement as required to facilitte, as in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, chimneys and similar suspended work, complete all directed.

M&L for writing letters or figures with (Block roman italic or Indian) exc 30cm high of suitable width as required at site with two coats of flourescent paint, complete all as specified and directed.

M&L for salt glazed stoneware drain pipes 150mm bore, grade 'A' laid in trenches and jointed in CM(1:1) including taking down old UNSV pipe, complete all as specified and directed.

Supply & laying jointing and testing 150mm bore reinforced concrete pipes class NP-2 laid and jointed in cement mortor 1:1 complete with collars or socket/spigot type laid jointed and haunching at side in cement, complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate), bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested, suitable for 150 mm bore pipe, complete all as specified and directed.

M&L pressed steel frames of size 125X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate,etc., PCC work, complete all as specified and directed.

S&F for 35 mm thick second class hard wood factory made plain, framed, panelled shutters, with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Removing of existing filling in sunken floor o wc/bath/kitchen and repair to sunken floor with 15 mm thick plastering in CM 1:3 of internal surface with PC than painting with bitumen 30/40 over a coat of bitumen primer putting 50 micron polythene than filling with pcc 1:5:10 type E-1 using 40mm graded stone aggregate and inserting 50 mm bore GI water pipe light grade spout complete all as specified and directed.

S & F floor door stopper of size 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

Excavation in post holes each not exceeding 0.5 cu.m, getting out in hardrock, including returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed. Note:- Blasting of hard rock is prohibited and use of mechanical plant or chisel cutting.

"Supply only" chain link MS Galvanised fencing any size or type, as shown in Drg No. CEJZ/TD/28 & CEJZ/TD/36 (SHEET NO. 1/2 & 2/2) dt.09.12.13 complete all as specified and directed. Note:- BOO will be conveyed by GE to ascertain the weight of GI chainlink fencing.

"Fixing only" chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire, complete all as specified and directed.

S&F mild steel screw bolts 5 to 10 mm dia (machine made) with hexagonal or square head and one end screwed or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but not exc 10cm long, complete all as specified and directed.

S&F galvanised 2 strand steel barbed wire 2.24 mm barbed with 2 mm dia of barbs at 75 mm spacing and straining and fixing to any type of standard rails , straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed.

Supply only MS round bars 10mm dia cut to length bent to shape required including cranking bending spiarally for hopping for column hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to IS, complete all as specified and directed.

Supply and Fixing of concertina coil as 600mm dia rounded 50 circuls covering in 10RM with necessary fixing material complete all as specified and directed.

M&L for fabrication and fixing of Steel gate 5.5 mtr wide and 2 mtr height with RCC column including all necessary excavation in any type of soil and painting complete all as specified and directed and as shown on drawing No TD/2004/13 sheet no 1/3 to 1/3

M&L for Steel gate 2.5 mtr wide and 2 mtr height with RCC column including all necessary excavation in any type of soil and painting complete all as specified and directed and shown on drawing No TD/2004/13 sheet no 1/3 to 1/3

Refixing old GI water tubing of 25 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.

All as per item No. 138.00 here-in-above, but size 20 mm bore

All as per item No. 138.00 here-in-above, but size 15 mm bore

S&F 25 mm bore of GI tubing medium grade, galvanized, with all fittings fixed to wall, ceilings or laid in floors, complete all as specified and as directed.

Dismantling, stone slab, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as directed.

M&L for complete removal of existing distampered of walls, complete all as directed.

S&F in replacement 1000 ltrs capacity rotational moulded polythene water storage tanks white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms, including taking down old u/s existing tank complete all as specified and as directed.

Disconnecting existing tanks setting aside [or lowering if required] for repairs,cleaning etc., and hoisting if required reconnecting and refixing in position of water tanks of capacity exc 500ltrs and not exc 1000 litres, including PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms, complete all as specified and as directed.

S&F in replacement stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed, (ISI Marked) suitable for 15mm bore, complete all as specified and as directed.

M&L for 50 mm thick plain cement concrete, 1:2:4 type B0 using 12.5mm graded stone aggreage, as in platform for water tank on roof slab etc.,rounded or chamfered on edges including necessary form work, complete all as specified and directed.

M&L for preparation of old painted surfaces of walls and applying one coat of cement base paint complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:4 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished surface fair and even without using extra cement, complete all as specified and as directed.

M&L for preparation of old decorated plaster surfaces of ceiling and applying one coat of white wash, complete all as specified and directed.

M&L for preparation of old decorated plaster surfaces of wall and applying one coat of white wash, complete all as specified and directed.

S&F 100mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor, complete all as directed.

S&F 75mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed

S&F 100mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall, complete all as specified and as directed.

S&F 75mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall, complete all as specified and as directed.

S&F100mm CI bends any radius, complete all as specified and as directed.

S&F 100mm dia CI vent cowl fixed to pipe, complete all as specified and as directed.

S&F Cast iron nahani trap with CP grating out let diameter 110mm including jointing to waste pipe fixed in cement mortar 1:1, complete all as specified and as directed.

S & F 75mm dia out let, PVC ( SWR) floor trap plain with grating including jointing to waste pipe with solvent cement, complete all as specified and as directed.

S&F 100mm dia CI door Tee bend fixed to pipe, complete all as specified and as directed.

Taking down carefully aluminium/copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendent, regulators, sockets, bell push, bell, light fittings etc. removing serviceable materials to store for keeping in safe custody for reuse at site or for taking credit (Credit shall be made as per Schedule of credit), removing rubbish from the site and making good all disturbed surfaces of walls, floors etc. to match to the existing surfaces, complete all as directed.

M&L point wiring using approved colour coding (Red , Black and Green for single phase circuits) as per IS code -694 with valid CML No., with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and sheathed FRLSH cable 1100 Volts grade, ISI marked, in and including heavy duty PVC conduit of dia not less than 20mm and conduit accessories ISI marked with valid CML No. ( IS 9537 -1983 for concealed in wall ISI marked with with pressed flush metal boxes covered with inner plates & outer plates etc, with cover plate(ISI Marked) cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated & sheathed multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly for One light/fan/bell point controlled by one, one way switch, complete all as specified and directed.

All as per serial Item No. 162.00 above but for one 3 pin socket outlet 5/6 Amps on the independent board, complete all as specified and directed.

All as per serial Item No.162.00 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board .omplete all as specified and directed .

S&F switch flush type single pole one way 5/6 Amp ISI Marked, complete all as specified and directed.

S&F switch flush type single pole one way 15/16 Amp ISI Marked, complete all as specified and directed.

S&F socket outlet 2 in 1, 6 pin, 5 and 15 amp flush type ISI Marked, complete all as specified and directed.

S&F socket outlet, 6 Pin, combined 2 module, 6/16 Amps, complete all as specified and directed.

M&L ceiling rose, 3 phase / PVC / Polycarbonate, isolated body, ISI Marked, complete all as specified and as directed.

S&F insulated Batton lamp holder metal cased body of brass with back plate suitable for batton fittings including 9 watt LED Lamps ISI Marked complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20/22W, 4 feet, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

S&F bldg security LED Light Luminaire of 35 Watts having IP 65/66 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 160-260 Volts with in built surge protectore, toughened glass with and including GI pipe 20/25mm dia bracket of 1.5 m in length including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable, complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm nominal cross section 2 core in service connections complete all as specified and directed., complete all as specified and directed Note: - (i) Excavation and earthwork, sand cushioning, PCC cable cover, shall be measured and paid separately in relevant item here in after .

M&L point wiring (concealed) using approved colour coding (Red , Black and Green for single phase circuits) as per IS code -694 with valid CML No., with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and sheathed FRLSH cable 1100 Volts grade, ISI marked, in and including stove enamelled steel conduit of dia not less than 20 mm, with accessories concealed in wall/roof/floor etc, ISI marked with fire proof prestressed steel sunken / concealed box suitable for flame proof switch rotary type with terminal box in LM6, 16A, single pole 250 V, (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, with 1 module cover plate(ISI Marked) cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated & sheathed multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly for One flame proof light point controlled by one, one way flame proof switch, complete all as specified and directed.

S&F switch flame proof rotary type with termination box in LM6, 16A, single pole 250V, complete all as specified & directed.

Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size, complete all as specified & directed.

S&F Prewired distribution board in sheet metal encl , prewired when MCB to be used with 200 Amps rated copper bus bar confirming to relevant IS SPN 8 way , complete all as specified and as directed.

Taking down carefully old UNSV Ceiling fan from existing location and depositing to the AGE E/M store yard and Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) Connecting up complete with and including three core flexible PVC insulated multi stranded copper condutor of size 1.0 sqmm from ceiling rose/ conector to fan (earth wire to connected to fan hook) ISI marked complete all as specified and as directed.

Supply, Installation, testing & commissioning of Split type air conditioner electric driven (single phase), cooling capacity 2.0 Ton BEE 3 Star rating, including M&L all acessoseries like copper tubes with insulation puffs, drainage pipe of required length as per site requirement, stand for mounting the outdoor unit on wall/roof etc. complete all as per specified & directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 150 V to 290 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA, complete all as specified and as directed.

S&F for sub main wiring with four runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 10 Sqmm and one run of 10 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 to 32 mm dia (external) with wall thickness not less than 1.8 mm, (ISI marked) concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc., complete all as specified and as directed. NOTE: four runs of 10.00 Sqmm cable with one run of 10.00 Sqmm earth wire and PVC conduit shall be measured & paid for as one length.

S&F for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 6 Sqmm and one run of 6 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 20 mm dia (external) with wall thickness not less than 1.8 mm, (ISI marked) concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc., complete all as specified and as directed. NOTE: two runs of 6.00 Sqmm cable with one run of 6.00 Sqmm earth wire and PVC conduit shall be measured & paid for as one length.

S&F in Prewired distribution board (sheet metal enclosures) TPN 4 way with suitable rated 200 Amps bus bar for Double door DB's of apporved gauge conforming to IS relevant, IP-43 protection, 240 volt, complete all as specified and directed by Engr-in-charge. Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

Supply, fixing, testing and commissioning SP 40 Amps 240V 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection, complete all as specified and as directed.

Supply, fixing, testing and commissioning TPN 63 Amps 240V 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection, complete all as specified and as directed.

Single pole and neutral enclosure with 2 pin earth industrial plug and socket with one MCB SPN 32 Amps, complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 3 connected to Earthing test point all as specified or indicated including testing on completion Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia, complete all as specified and as directed.

Supply, fixing, testing and commissioning SP 5 to 32 Amps 240V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection, complete all as specified and as directed.

Supply, fixing, testing and commissioning SPN 40 Amps 240V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection, complete all as specified and as directed.

S&F and testing factory made sheet metal enclosure for MCB DB SPN 8 way 240 volt with double door, IP - 42 DB's suitable for one MCB SPN as incoming and two MCB SP as out going protection duly fixed/concealed in wall complete and making good disturbed surfaces of wall, floor etc including necessary connection lugging with copper lugs pin/ring type, complete all as specified and as directed.

Supply,fixing, testing and commissioning of addressable smoke (white colour) detector with mounting base, with inbuilt test button and with power operated / ultra alkaline battery, wireless signal output, max area coverage 49 Sqm with 12 f eet height, including wireless optical smoke sensor, analogue system through radio waves compatibility, plugs into surface base mounting, red LED indication, photo electric light scatter detection principle, 12 V power connection / 9 volts DC battery operating voltage, unique address embedded in detector addressing method, indoor type, moulded ABS, Dimensions: 106mm (Dia) x 36mm (H), complete all as specifeied and directed by Engr - in - Charge. Make GE/Honeywell/Bluestar as approved by GE

Supply, install and testing Intelligent hooter (Red color) with flasher light wireless type in heavy abc engineering plastic box all mounting accessories, complete as required. Inclding transmitter to transmit signal of manual call point / smoke detector, wireless hooter cum flasher with module, analogue smoke sensors through radio waves compatibility, plug into surface base mounting, hooter cum flash light indication, 105 db sound, reads different zones of smoke sensors principle function and push the signals so as to collect and read by wireless panel, 12 volts DC operating voltage, 2 pin 5 Amp socket is required to be connected and charging, 10 Nos 1.2 V (AAA size) battery, 6 Hours power backup, unique address embedded in detector, indoor type, made out ABS Plastic body, complete all as specifeied and directed by Engr - in - Charge. Make GE/Honeywell/Bluestar as approved by GE

Supply,fixing, testing and commissioning of intelligent wireless manual call station (red colour), modern push type emergency button with set & reset button with safety cover, with Lock / un-lock facility optional, radio transmitter through radio waves, fix into moulded box, unique address embedded, indoor type, moulded ABS, complete all as specifeied and directed by Engr - in - Charge. Make GE/Honeywell/Bluestar as approved by GE

Supply,fixing, testing and commissioning of microprocessor based Intelligent wireless digital addressable fire alarm centralised panel, digital type alarm control panel with capacity 100 devices, event historical logging, input AC power supply, automatic battery charger, 12 volts sealed maintenance free lead acid batteries complete with Compatibility - radio emitter through radio waves,Indication, Alarm 105 db, displays different zones of smoke sensors transmitted by Hooter cum flasher, 12 volts DC ( Rechargeable batteries) Operating voltage, two pin 5 Amp socket is required to be connected for charging, 7 to 8 Hours Power Backup, digital nos. display on screen with display manual chart,Indoor type, mild steel body, 12V DC, 1.2 AH Battery, complete all as specifeied and directed. Make GE/Honeywell/Bluestar as approved by GE

S&F sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 1.50 Sqmm and one run of 1.50 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 15 mm dia (external) with wall thickness not less than 1.8 mm, (ISI marked) surface conduit on wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc., complete all as specified and as directed. NOTE: Two runs of 1.50 Sqmm cable with one run of 1.50 Sqmm earth wire and PVC conduit shall be measured & paid for as one length.

Supply,fixing, testing and commissioning of ABC type fire extiguisher (minimum capacity 6 Kg) including fixing accessories such as stand, fasteners etc, complete all as specifeied and directed.

Note for item No. 13.00: - (i)- A Information Tablet will be put up in the front side wall of the buildings where this work will be done. All building/structure shall be provided with plaque (tablet) furnishing the information as per PS clause, in plaster engraving in and painted as directed by GE (ii)- WPC shall be measured and paid separately under respective item..

Note for all items:- (i) All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Repairs/Replacement unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ Bidders are required to quote their rates accordingly. (ii) The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount (iii) Makes of materials will be approved by GE in writing before commencement of work. (iv)- Quantities are clubbed in BOQ for different Jobs. For which ref. Annexure-I on Sl. page. No. 43 (A) to 43 (D) of tender document.

M/S SUMAN ENTERPRISES

M/s Ajay kumar Garge

JB INFRA