Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.1 LAccepted-AOC VILL SAHAJADPUR P O SAHAJADPUR DIST MURSHIDABAD PIN 742187 WEST BENGAL | SAHAJADPUR | MURSHIDABAD | WEST BENGAL | 742187 | L1 | Accepted-AOC Accepted due to L1 | |
| 2 | L2₹24.8 L+₹1.7 L (7.40%)Rejected-AOC ROOM NO 262 PART II NEAR SANKER MANDIR GANESH MURTHI NAGAR COLABA MUMBAI 05 | MUMBAI | L2 | Rejected-AOC Rejected due to L2 | |
| 3 | L3₹27.9 L+₹4.8 L (20.6%)Rejected-AOC | L3 | Rejected-AOC Rejected due to L3 | |
| 4 | L4₹29.2 L+₹6.1 L (26.3%)Rejected-AOC | L4 | Rejected-AOC Rejected due to L4 |
Tender Value
₹28.9 L
EMD Value
₹57,740
Closing Date
6 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE PANAGARH
HQ CWE PANAGARH, MES, PO - PANAGARH, DIST - BURDWAN, WB, PIN - 713420
ANCILLARY FACILITIES FOR KSP AT NABAGRAM MILITARY STATION UNDER CWE PANAGARH
2024_MES_649162_1
8915/E8
Open Tender
Civil Works
Item Rate
180 days
NABAGRAM
Pls refer Tender Documents
7 documents required · 7 mandatory
₹500
AGE (I) NABAGRAM
₹57,740
Yes
3 Jul 2024
3 Apr 2024
14 May 2024
3 Apr 2024
6 May 2024
18 Apr 2024
Amount
B/R PORTION
Surface excavation in any type of soil, not exceeding 30 cm deep and averaging 15 cm deep and getting out to required slope, gradient, camber & super elevation complete all as specified and directed. Note:- Total qty : 255.50+28.0+1050.00 = 1333.50 Sqm
Add to (or deduct from) item No. 1.01 above here-in-before for every 3cm or part thereof above or below 15cm average depth complete all as specified and directed.
Excavation in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any type of soil, complete all as specified and directed. Note:- Total qty : 6.00+11.25+45.00 = 62.25 Cum
Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil, complete all as specified and directed. Note:- Total qty : 3.70+10.13+25.40 = 39.23 Cum
Removing surplus soil to a distance n.exc 50m and deposited where directed at a level not exceeding 1.50 m above the starting point complete all as specified and directed. Note:- Total qty : 76.65+8.40+157.50+2.30+1.13+19.6 = 265.58 Cum
Excavating in post holes (or similar holes) each not exceeding 0.5 cum in soft/loose soil, getting out, and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed. Note:- Filling of PCC will be measured & paid under Item No 1.17
Forming embankments including raising (or) lowering earth, spreading in layers nexc 30 cm thick, watering, ramming/rolling and finishing to required size, shape, etc. nexc 1.5 m high from base including rough excavation and brought the soil from a distance exc 5 Km and n exc 10 Km, complete all as specified and directed.
Rolling and consolidating formation surfaces (in cutting) with 8 to 12 ton power roller complete to required level, gradient, slopes, camber and super elevation including filling depressions with and including approved earth which may occur during rolling process complete all as specified and directed. Note:- Total qty : 25.55+105.00 = 130.55 Cum
M&L soling (or sub base) 150mm spread thickness with broken boulders, 80 to 63 mm size interstices filled, surface formed and rolled to required level, camber, gradient and super elevation and consolidating with 8 to 12 ton power roller complete all as specified and directed.
M&L 15cm thick (compacted thickness) WBM in two layers (each layer of 75mm thick) with coarse aggregates of granite trap and basalt grading 2 (63 to 40mm size) or grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber with 8 to 12 tonne power roller required, complete all as specified and directed.
M&L preparing unsurfaced water bound macadam top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and including applying evenly a prime coat of Cationic Bitumen Emulsion SS1 confirming to IS : 8887 at a rate of application of 1.0 kg/sqm on surface of WMM / WBM as specified in Table 500-3 of MoRTH Specification for road and bridge works 2013, using mechanical sprayer, complete all as specified and directed.
M&L Bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with 5.5% binder with paving bitumen (VG-30), filler cement as per recommendation of design by weight of total mix from hot mix plant, rolled by with 8 to 12 tonne vibrating (tandom) road roller to confirm uniform surface and compacted to required camber and gradient complete with mechanical paver, complete all as specified and directed.
M&L for Hard core of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and well rammed to a true surface complete all as specified and directed.
M&L 100 mm thick plain cement concrete (1:3:6), type C2, (using 40 mm graded crushed stone aggregate) as in sub base of path, even and rough without using extra cement complete all as specified and directed.
M&L factory made coloured precast chequered cement concrete designer tile (interlocking tile) top layer glazed made with white cement & pigment and the base in grey cement of thickness 22 to 25 mm thickness in different colour and pattern (compressive strength not less than 250 Kg/Sqm) as approved by GE, set in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over 15 mm thick screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed.
S&F at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.
M&L plain cement concrete 1:2:4 type B-2 using 40 mm graded stone aggregates as in sub base, foundation, filling and mass concrete complete all as specified and as directed.
S&F mild steel Angle iron 65x65x6mm as in posts and struts in fencing including cutting tops to shape as directed drilling holes notching of wire, etc. flat iron fillets 40x6mm, 3 Nos 10mm dia bar at each panel and 4 Nos 8mm dia bars hooked at each post (for securing wire mesh etc.) including all necessary drilling, bolting or revieting, welding at corners etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. Note:- Necessary S&F of mild steel screws bolts, nuts & washers shall be measured and paid separately under relevant item.
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut , not exceeding 15 cm long, diameter of neck 5 to 10 mm complete all as specified and directed.
Supply only chain link fence of size 50 x50 x3.00mm made of galvanized wire and shall conform to IS:2712-2003, mesh wire and line wire of the fabric to be manufactured from galvanized steel wire conforming to IS 280:2006 having zinc coating of type heavy as laid down in IS 4826, complete all as specified and directed. Note:- Weight of chain link fence ascertian through BOO for measurement
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards,rails,straining bolts, etc. including provision of binding wire, complete all as specified and directed.
S&F Galvanised 2 Strand steel barbed wire (confirm to IS 278-2001) 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and starting and fixing to any type of stardard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed. (each line of wire to be measured seprately)
M&L preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed. Note:- Total qty : 84.24+15.00 = 99.24 Sqm
M&L for preparing surfaces of steel and iron work of and girth not otherwise described and treating ends of post etc. with tar or coal tar black paint, area tarred exceeding 0.1 sqm but not exceeding 0.5 sqm each complete all as specified and directed.
M & L plain cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregateas in sub base, foundation, filling and mass concrete complete all specified and as directed.
M&L for reinforced cement concrete M-25 (Nominal Mix) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc., complete all as specified and directed.
M&L for 10mm dia and over TMT Steel bar cut to length bent to shape reqd incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. Note:- Total qty : 101.12+75.84 = 176.96 Kg
All as per Item No. 1.27 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed.
Form work to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams for rough finished surfaces of concrete, complete all as specified and directed.
M&L for reinforced cement concrete M-25 (Nominal Mix) using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.
Form work to flat sides of pillars, posts, struts, piers, columns and stanchion for rough finished surfaces of concrete, complete all as specified and directed.
S&F for rolled mild steel frame work with and including sand cast iron work grade FE-410W undecorative pieces, angle or other sections with and including bush and rod type hanging device, sutable wheel arrangement for sliding with sliding rails, MS locking arrangement, complete have grinder finish and one shop coat of red oxide primer and two coat of synthetic enamel paint, complete all as specified and as directed:- (i) Mild steel frame work of grade Fe-410-W as in gates. (ii) Decorative cast iron pieces of size and shape as directed by Engr-in- charge (iii) Provn of bush and rod type pintel hinges
S&F mild steel structural steel work as in rolled mild steel frame work as in framing for cladding glazing and the like fixed with angle cleats and connecting plates etc. of Fe-410-W (Gde Fe-250) quality-A complete all as specified and directed.
E&M PORTION
Supply and laying Pipes galvanized, 50 mm bore “Medium grade”, laid in trenches complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc. as per site requirement, complete all as specified and directed.
S&F gun metal, gate valve, 50 mm dia with iron wheel head, screwed both ends for iron pipe and fix, complete all as specified and directed.
Cutting, screwing existing steel tubing of size 80 or 100 mm bore diameter for aleration or addiation (or lengthening screw on pipe to from connector) and relaying/ refixing to its new/old position complete all as specified and directed.
M&L for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregates as in sub base, foundation, filling and mass concrete complete all as specified and as directed. Note:- Total qty : 1.00+1.00 = 2.00 Cum
Material and labour point wiring for light point/ fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc., complete all as specified and directed. Note : Quoted rate including necessary chasing cutting and making good.
All as per Item No. 2.05 here-in-before but One 3 pin 5 Amps switch socket combination points with cable 2.5 sqmm on independent board, complete all as specified and directed. Note : Quoted rate including necessary chasing cutting and making good.
All as per Item No. 2.05 here-in-before but One 3 pin 15 Amps switch socket combination points with cable 4.0 sqmm on independent board, complete all as specified and directed. Note : Quoted rate including necessary chasing cutting and making good.
S&F switch socket combination 2 in 1, 3/5 pin, (6 Amps), flush type, universal, complete all as specified and as directed.
S&F switch socket combination 2 in 1, 6 pin, (6 and 16 Amps), flush type, universal, complete all as specified and as directed.
S&F ceiling rose surface bakelite 65 mm x 50 mm three terminal suitable for 230 Volts, AC, 6 Amps, isolated body, complete all as specified and directed.
S&F switch piano, flush type, single pole, 5/6 Amps, one way, complete all as specified and directed.
S&F LED light fitting 20 Watt with and including LED tube rod 4 feet long suitable for single phase 230V 50 Hz AC, efficacy 100 lumen/watt supply made with aluminum extrusion complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable of size 1.5sqmm( nominal area ) complete all as specified and directed.
S&F LED light fitting 10 Watt with and including LED tube rod 2 feet long decorative type suitable for single phase 230V 50 Hz AC, efficacy 100 lumen/watt supply made with aluminum extrusion complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable of size 1.5sqmm( nominal area ) complete all as specified and directed.
S&F ceiling fans metal body complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
S&F ventilating metallic body turbo exhaust fan 300 mm sweep 230 volt AC, heavy duty complete with louver and all accessories with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size, complete all as specified and as directed.
S&F MCB, SP, 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection, complete all as specified and directed.
S&F MCB, SPN, 20 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessry connection, complete all as specified and as directed.
S&F epoxy powder coated sheet metal enclosure IP-43 & IK-09 with metal door & as per IEC 61439-3 suitable for flush mounting & surface mounting, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with 200 Amps rated suitable size of copper busbar fully insulated, DIN channel, Neutral bar & Earth bar and incoming contact, complete all as specified and directed.
M&L earthing complete with galvanised steel earth plate electrode 60cmX60cmX6mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level)with top edge of the plate not less than 1.5 metres below normal groundlevel, connected to galvanised earth lead wire 4mm dia by means of volts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-3 of SSR Part-I connected to earthing test point all as specified or indicated including excavation and connected earth work in hard/dense soil, PCC 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15 mm bore GI medium grade earth lead protection pipe, 50 mm thick RCC 1:2:4 type B-1 cover slab of earth pit reinforced with 8 mm dia TMT bars @ 10 cm C/C both ways and with handle made out of 10 mm dia bars, funnel, strainer,charcoal and testing on completion, complete all as specified and directed.
Supply, laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 vlts grade, cross sectional area 10 sqmm 2 core, laid in trenches/on pole/ in pipe/or wall using suitable clamp for fixing of cable, complete all as specified and directed. Note : Excavation, sand cushioning, brick will be measured and paid separtely under relevant item.
Supply, laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 vlts grade, cross sectional area 70 sqmm 3½ core, laid in trenches/on pole/ in pipe/or wall using suitable clamp for fixing of cable, complete all as specified and directed. Note : Excavation, sand cushioning, brick will be measured and paid separtely under relevant item.
M&L river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed. Note : Punned thickness 18 cm shall only be considered for payment.
Supply and laying in trenches fly ash bricks, for cable protection, complete all as specified and directed.
S&F Pipes galvanized, 50 mm bore “light grade”, including necessary fittings such as tees, bends, elbows, sockets, reducers etc. laid in trenches/fixed with poles/laid in road/plinth/floor for protection of cable, complete all as specified and directed.
M&L earthing complete with galvanised steel earth plate electrode 60cmX60cmX6mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level)with top edge of the plate not less than 1.5 metres below normal groundlevel, connected to galvanised earth lead strip 32 X 6 mm by means of volts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-3 of SSR Part-I connected to earthing test point all as specified or indicated including excavation and connected earth work in hard/dense soil, PCC 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15 mm bore GI medium grade earth lead protection pipe, 50 mm thick RCC 1:2:4 type B-1 cover slab of earth pit reinforced with 8 mm dia TMT bars @ 10 cm C/C both ways and with handle made out of 10 mm dia bars, funnel, strainer,charcoal and testing on completion all as specified and directed.
S&F of Solar street light with in built charger controller (PWM) 12.8V 27 AH, charger battery from solar panel protects battery from over charging/over discharging, protects panel from reverse current, including 5 mtr pole of dia 80mm with suitable fixture and LED lamp 4 X 40 Watt complete all as specified and directed .
Supply install, testing & commissioning factory made CPRI approved LT feeder pillar box out door type factory made totally enclosed dust and vermin proof single opening with double leaf shutter duly hinged with locking arrangement made of MS Angle iron frame work and CRCA Sheet of 3.15mm thick as per IS 5039 dually painted with epoxy base powder coated paint of approved shade over a coat of Red Oxide Zink Chrome Primer neccessary holes Shall be kept on the kiosk box for incoming and outgoing cable entry. All Holes Shall be provide with brass cable gland of appropriate size.The feeder piller Box Shall be Suitable for 415 volts ,50 Hz ,3 Phase 4 wire System and shall be completed with 300 amps Capacity Aluminium TPN Busbar Chamber having TPN 3 Phase 4 Wire System Fixed on Porcelain Insulator with suitable size PVC copper Conductor duly Sleeved with 4 Coloured heat Shrinkable PVC Sleeve, thimble Glands and shall be compolete all as directed. Note:- The cost PCC plateform shall be deemed to include in the qoated rate of above said item
Item 2.27 Contd LT feeder pillar box comprising with following accessories:- (i) MCCB 4 pole TPN , 100 Amps ,36 KA, 415 Volts, 50 Hz - 01No (As incoming) (ii) MCCB ,3 pole TP 63 amps ,10KA, 415 Volts, 50 Hz - 03 Nos (Out going) (iii) MCB ,3 pole SPN 40 amps ,10KA, 415 Volts, 50 Hz - 02 Nos (Out going) (iv) LED phase Indicator lamp (R,Y,B) with MCB SP 2 amps showing 3 phase supply switch control – 03 Nos (v) LED Multi Function meter for Showing Multy parameters -01 No. (vi) On Load Change over switch with SS Enclouser 100 Amps -01 No.
M&L for cable route marker with route indication on cast iron disc of 100mm dia and 10mm thick, marked / written for "LT CABLE 1100 VOLTS" embosed including indicating direction fixed / bolted to 40mmx40mmx6mm thick MS angle iron support of 0.5m long embedded upto 200mm depth in concrete block of size 200mm x 200mm x 500mm of mix PCC 1:3:6, type C-1 including painting with two coats of synthetic enamel paint over a coat of red oxide primer to exposed steel surfaces complete all as specified and directed.
Abida Enterprises
ANSH CONSTRUCTION
NS Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .