Construction Of Multi Purpose Hall And Washing Point in OTM accommodation at HQ DGBR Complex (Seema Sadak Bhawan), Ring Road, Delhi Cantt, New Delhi

Amount

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting out complete all as specified and as directed by Engineer in Charge/OC Contract.

M&L Cement concrete Type D2 PCC 1:4:8 (40 mm graded aggregate) in foundations, filling and mass-concrete complete all as specified and as directed by Engineer in Charge/OC Contract.

M & L Cement concrete type B-2, PCC 1:2:4 (20 mm graded aggregate) 100 mm thick complete all as specified and as directed by Engineer in Charge/OC Contract.

M & L Beams, cantilevers, bressummers, lintels over 1.5m span Type B-1, RCC 1:2:4 (20 mm aggregate) complete all as specified and as directed by Engineer in Charge/OC Contract.

M&L MS Roof trusses (framed), Vertical post, trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Square or Rectangular hollow sections) including distance pieces, cleats etc. conforming to Fe-290 Gde-165 complete all as specified and as directed by Engineer in Charge/OC Contract..

S&F Powder coated anodised aluminium windows, ventilators shutters, side hung type without sash, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (01No) hinges type B-21 100mm long (2No) suitable handle (01No) for fixing etc. complete all as specified and as directed by Engineer in Charge/OC Contract.

M &L Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and as directed by Engineer in Charge/OC Contract.

M&L rendering 15 mm thick in CM 1:4 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer in Charge/OC Contract.

M&L Distempering walls with cement paint, white or tinted complete all as specified and as directed by Engineer in Charge/OC Contract.

M&L Preparation of New or previously untreated steel surface or any description, over 10cm in width or girth, not otherwise described and applied two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer in Charge/OC Contract.

M&L for hard core of broken stone broken to gauge not exc 63 mm deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer in Charge/OC Contract.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer in Charge/OC Contract.

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces complete all as specified and as directed by Engineer in Charge/OC Contract.

M&L Glazed coloured ceramic tiles in vertical surface 350x250x7mm/450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed by Engineer in Charge/OC Contract.

M&L screed bed or bedding layer 15 mm thick in cement mortar 1:6 on floors for laying floor finish complete all as specified and as directed by Engineer in Charge/OC Contract.

S&F, Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self-tapping screws complete all as specified and as directed by Engineer in Charge/OC Contract.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed by Engineer in Charge/OC Contract.

M&L for concealed point wiring with 3 x1.5 Sq mm (nominal area) FRLS PVC insulated un sheathed and stranded cooper conductor cable/phase, neutral and earth wire in and including PVC concealed conduit ISI marked of suitable size medium grade with PVC conduit fittings such as tees, bends, elbow, reducers, including cutting chasing and marking good to disturbed surface, earth wire cover plate 3 mm thickness plastic laminated sheet for one light point complete all as specified and as directed by Engineer in Charge/OC Contract.

All as per item No18 here in before but for one socket outlet point 5 amps on the independent board complete all as specified and as directed by Engineer in Charge/OC Contract.

All as per item No 18 here in before but with 3 x 2.50 sqmm (nominal area) FRLS PVC insulated unseathed and stranded copper wire 15 Amp power point complete all as specified and as directed by Engineer in Charge/OC Contract.

Supply and fixing MCCBs 415V,16KA, 4 Pole, 16A complete all as specified and as directed by Engineer in Charge/OC Contract.

S & F Modular socket 6/16 Amp, multipurpose shutter type , 02 module size complete all as specified and as directed by Engineer in Charge/OC Contract.

S & F Modular switch 6 Amp, 1 way, 1 module size complete all as specified and as directed by Engineer in Charge/OC Contract.

S & F Modular switch 16 Amp, 1 way, 1 module size complete all as specified and as directed by Engineer in Charge/OC Contract.

M&L for ceiling rose surface type bakelite 65X50 mm two or three terminals complete all as directed.

Supply and fixing in repair LED light fitting 20Watt with and including LED tube rod 4 feet long suitable for single phase 230V 50 Hz AC supply made with aluminum extrusion complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable of size 1.5sqmm( nominal area ) complete .Make Philips Cat part No - B085P2D5KS or eqvt to Bajaj, Havells, Crompton, WIPRO etc complete all as specified and as directed by Engineer in Charge/OC Contract.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fitting in trenches complete all as specified and as directed by Engineer in Charge/OC Contract.

Supply and fixing of Brass Elbow (3/4") complete all as specified and as directed by Engineer in Charge/OC Contract.

Supply and fixing of Brass Elbow (3/4 x1/2) complete all as specified and as directed by Engineer in Charge/OC Contract.

Supply and fixing of Brass Tee (3/4") complete all as specified and as directed by Engineer in Charge/OC Contract.

Supply and fixing of Male Brass Threaded adaptor (3/4") (MTA/ MBTA) complete all as specified and as directed by Engineer in Charge/OC Contract.

Supply and fixing of Female Brass Threaded adaptor (3/4") (FTA/ FBTA) complete all as specified and as directed by Engineer in Charge/OC Contract.

Stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union (3/4") and fixed complete all as specified and as directed by Engineer in Charge/OC Contract.

Plug type bib taps, cast iron, screwed for iron pipe (3/4") and fixed complete all as specified and as directed by Engineer in Charge/OC Contract.

Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and as directed by Engineer in Charge/OC Contract.

Supply and fixing PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 100 mm Dia complete all as specified and as directed by Engineer in Charge/OC Contract.

PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors, 75 mm Dia complete all as specified and as directed by Engineer in Charge/OC Contract.

Supply and fixing PVC (SWR) bends any radius, 75 mm Dia complete all as specified and as directed by Engineer in Charge/OC Contract.

PVC (SWR) junction single, (Single T) equal or unequal, 75 mm Dia complete all as specified and as directed by Engineer in Charge/OC Contract.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engineer in Charge/OC Contract.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer in Charge/OC Contract.

Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer in Charge/OC Contract.

Fixing Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed by Engineer in Charge/OC Contract.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed by Engineer in Charge/OC Contract.

S & F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer in Charge/OC Contract.

Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed by Engineer in Charge/OC Contract.

S & F PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing, Thickness of PVC insulation panel is 10 mm complete all as specified and as directed by Engineer in Charge/OC Contract.

20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete

Supply and fixed in repairs MCB four pole 'C' Curve 240 Volts of capacity 63 Amps 10 KA rating complete all as specified and as directed by Engineer in Charge/OC Contract.

S & F Cashing/ Capping 3 Inch width and 2 ft length complete all as specified and as directed by Engineer in Charge/OC Contract.

Grating doom 100 mm dia of PTMT. (Minimum weight 25 gms) complete all as specified and as directed by Engineer in Charge/OC Contract.

AKANSHA CONSTRUCTION