Fabrication installation testing and commissioning of new gates by way of replacing damaged old ones installed at Lalyana Moga , LIS Ismailpur, Ranbir Canal and its distributaries at below mentioned locations and Nandpur ditch.

Amount

Gate at Ismailpur LIS (2’6”X 2’.0”) Dismantling of damaged winch m/c (2 ton cap.) ,installed on the distributary system of sump at LIS Ismailpur from its hoisting and extraction of the damaged gate leaf with the help of necessary tools, tackles and hoisting mechanism/manual labour . Cleaning of the guide channels and base . Fabrication of gate leaf channel of size (2’6”X 2’.0”) (approx) using the ISMC channel of 75X40MM size with requisite no. of cross members for support by way of cutting /welding using superior quality electrodes. Providing and then welding the MS sheet of 5 mm thickness on the frame of channel structure and finishing the gate structure. Also making of provision for stem rod attachment with 2 no. L-shaped MS Clamps. Providing/fixing of seal of size as per required match at bottom of leaf frame by way of nut bolts /rivets or MS flat for securing the seal with the leaf. Fabrication, providing & fitting of 02 Ton capacity manually operated, worm gear type winch machine along with base plate of 10mm thickness of suitable size and one stem rod duly threaded along its length for up down movement of the gate and then oiling and greasing the gear mechanism/ stem rod before fitting. job also includes drilling of holes on top hoisting channels , L clamps, base plate for fixing winch machine and stem rod. Complete painting of gate structure and the winch machine by way of providing two coats of superior quality paint after applying one coat of red oxide primer. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using manual labour, tools and tackles using chain pulley block and tripod. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete job includes cost of material, transportation charge, labour charges and testing for its smooth operation at site. Dismantling of damaged winch m/c of gate (4’6”x2’6”) installed on the distributary system of sump at LIS Ismailpur from its hoisting and extraction of gate with the help of necessary tools, tackles and hoisting mechanism/manual labor . Fabrication, providing & fitting of 02 Ton capacity manually operated, worm gear type winch machine along with base plate of 10mm thickness of suitable size and one stem rod duly threaded along its length for up down movement of the gate and then oiling and greasing the gear mechanism/ stem rod before fitting. job also includes drilling of holes on top hoisting channels , L clamps, base plate as per the requirement for fixing winch machine and stem rod. Complete painting of gate structure and the winch machine by way of Providing two coats of superior quality paint lowering the leaf structure into the sliding grooves using manual labour, tools and tackles/chain pulley block and tripod. connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete job includes cost of winch machine, transportation charge, labour charges and other equipments required for the complete execution of the job and testing for its smooth operation at site.

Gate of Ismailpur Distributary(4’0”X 2’3’’) Dismantling of damaged 02 ton capacity winch machine from the supporting channel then extracting out the damaged/worn out gate leaf structure with the help of manual labour using tools and tackles, chain pulley block after cleaning area around the gate leaf. Fabrication of gate leaf structure of size (2’3”X 4’.0”) (approx) using the ISMC channel of 75X40MM size heavy duty with requiste no. Of cross members for support by way of cutting /welding using superior quality electrodes. Providing and then welding the MS sheet of 5 mm thickness on the frame of channel structure and finishing the gate structure. Also making of provision for stem rod attachment with 2 no. L-shaped MS Clamps. Job also includes Complete fabrication of outer MS structure of size ( 4’8”x 4 ‘) approx by MS channel of 100x50 mm consisting of groove channels, base channels , top hoisting channels ,4 no .side support clamps for rigid anchoring of size and checking it for trouble free operation. Providing/fixing of seal of size as per required match of bottom of leaf frame by way of nut bolts /rivets or MS flat for securing the seal with the leaf. Fabrication, providing & fitting of 02 Ton capacity manually operated, worm gear type winch machine along with base plate of 10mm thickness of 15’X15’ size approx and one stem rod duly threaded along its length for up down movement of the gate and then oiling and greasing the gear mechanism/ stem rod before fitting. job also includes drilling of holes on top hoisting channels , L clamps, base plate for fixing winch machine an stem rod. Complete painting of gate structure and the winch machine by way of Providing two coats of superior quality paint after applying one coat of red oxide primer. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation.. Installation of gate structure by casting grooves near side supports and fixing the gate structure along the walls of distributory by anchoring/pcc and subsequently lowering the leaf structure into the sliding grooves using manual labour, tools and tackles using chain pulley block and tripod. connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete job includes cost of material, transportation charge, labour charges and testing for its smooth operation at site. Dismantling of damaged winch m/c of gate (5’0”x 2’3”) installed on the distributary of LIS Ismailpur from its hoisting and extraction of gate with the help of necessary tools, tackles and hoisting mechanism/manual labour. Fabrication, providing & fitting of 02 Ton capacity manually operated, worm gear type winch machine along with base plate of 10mm thickness of suitable size and one stem rod duly threaded along its length for up down movement of the gate and then oiling and greasing the gear mechanism/ stem rod before fitting. Job also includes drilling of holes on top hoisting channels , L clamps, base plate as per the requirement for fixing winch machine and stem rod. Complete painting of gate structure and the winch machine by way of Providing two coats of superior quality paint after cleaning and rubbing the gate with sand paper. Lowering the leaf structure into the sliding grooves using manual labour, tools and tackles/chain pulley block and tripod. connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete job includes cost of winch machine , transportation charge, labour charges and other equipments required for the complete execution of the job and testing for its smooth operation at site.

Gate of Lalyana Moga. (4’6”X 2’.6”) Dismantling of damaged winch m/c installed on the distributary system from its hoisting and extraction of the damaged gate leaf with the help of necessary tools, tackles and hoisting mechanism/manual labour . Cleaning of the guide channels. Fabrication of gate leaf of size (4’6”X 2’.6””) (approx) using the ISMC channel of 75X40MM size with requiste no. of cross members for support by way of cutting /welding using superior quality electrodes. Providing and then welding the MS sheet of 5 mm thickness on the frame of channel structure and finishing the gate structure. Also making of provision for stem rod attachment with 2 no. L-shaped MS Clamps. Providing/fixing of seal of size as per required match of bottom of leaf frame by way of nut bolts /rivets or MS flat for securing the seal with the leaf. Fabrication, providing & fitting of 02 Ton capacity manually operated, worm gear type winch machine along with base plate of 10mm thickness of suitable size and one stem rod duly threaded along its length for up down movement of the gate and then oiling and greasing the gear mechanism/ stem rod before fitting. job also includes drilling of holes on top hoisting channels , L clamps, base plate for fixing winch machine and stem rod. Complete painting of gate structure and the winch machine by way of Providing two coats of superior quality paint after applying one coat of red oxide primer. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using manual labour, tools and tackles using chain pulley block and tripod . connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete job includes cost of material, transportation charge, labour charges and testing for its smooth operation at site. Fabrication, providing & fitting of 02 Ton capacity manually operated, worm gear type winch machine at Mehmoodpur Escape gate(5’0”x3’6”) along with base plate of 10mm thickness of suitable size and one stem rod duly threaded along its length for up down movement of the gate and then oiling and greasing the gear mechanism/ stem rod before fitting. Job also includes drilling of holes on top hoisting channels , L clamps, base plate as per the requirement for fixing winch machine and stem rod. Complete painting of winch machine by way of Providing two coats of superior quality paint after cleaning and rubbing the gate with sand paper. connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete job includes cost of material, transportation charge, labour charges and other equipments required for the complete execution of the job and testing for its smooth operation at site.

Gate at NANDPUR DITCH 1 Dismantling of damaged winch m/c installed on the distributary system from its hoisting and extraction of the damaged gate leaf with the help of necessary tools, tackles and hoisting mechanism/manual labour . Cleaning of the guide channels and base . Fabrication of leaf structure of size (3’6”X 3’.0”) (approx) using the MS angle min 40MM size with requisite no. Of cross members ( min 3) for support by way of cutting /welding using superior quality electrodes. Providing and then welding the MS sheet of suitable thickness on the frame of gate and finishing the gate structure. Also making of provision for stem rod attachment with 2 no. L-shaped MS Clamps. Providing/fixing of seal of size as per required match of bottom of leaf frame by way of nut bolts /rivets or MS flat for securing the seal with the leaf. Fabrication, providing & fitting of 02 Ton capacity manually operated, worm gear type winch machine along with base plate of 10mm thickness of suitable size and one stem rod duly threaded along its length for up down movement of the gate and then oiling and greasing the gear mechanism/ stem rod before fitting. job also includes drilling of holes on top hoisting channels , L clamps, base plate for fixing winch machine and stem rod. Complete painting of gate structure and the winch machine by way of Providing two coats of superior quality paint after applying one coat of red oxide primer. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using manual labour, tools and tackles using chain pulley block and tripod . connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete job includes cost of material, transportation charge, labour charges and other equipments required for the complete execution of the job and testing for its smooth operation at site.

Gate of Chumbian at Ranbir Canal(3’4”X 3’0”) Fabrication of gate leaf frame of size (3’4”X 3’0”) (approx) using the ISMC channel of 75X40 MM size with requisite no. of cross members for support by way of cutting /welding using superior quality electrodes. Providing and then welding the MS sheet of 5 mm thickness on the frame of channel structure and finishing the gate structure. Also making of provision for stem rod attachment with 2 no. L-shaped MS Clamps. Providing/fixing of seal of size as per required match of bottom of leaf frame by way of nut bolts /rivets or MS flat for securing the seal with the leaf. Job includes fabrication providing and fitting at site of hoisting channel-01 no. fabricated out of MS Channel 100x50 mm of approx length 5’6” and proper anchoring in the PCC. Fabrication, providing & fitting of 02 Ton capacity manually operated, worm gear type winch machine along with base plate of 10mm thickness of suitable size and one stem rod duly threaded along its length for up down movement of the gate and then oiling and greasing the gear mechanism/ stem rod before fitting. job also includes drilling of holes on top hoisting channels , L clamps, base plate for fixing winch machine and stem rod. Complete painting of gate structure and the winch machine by way of Providing two coats of superior quality paint after applying one coat of red oxide primer. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Job includes cleaning of side channels and proper oililng/greasing. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using manual labour, tools and tackles using chain pulley block and tripod. Connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete job includes cost of material, transportation charge, labour charges, excavation and testing for its smooth operation at site.

Rebate on old items per Kg

M/S V.N ENGG WORKS

KRISHNA ENGINEERING WORKS

NATIONAL ELECTRO-MECH COMPANY