GENERAL-Mini Indoor Stadium,Kanhangad-- SITC of Fire Protection System in Mini Indoor Stadium-Electrical Fire Fighting Work

Fire Fighting

OD79794/2025-2026:Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) a. Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. c. M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. d. Suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 35 m Head

90.14.1.1:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame)

90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet

90.14.10.4:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 25/35 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL

OD6131/2025-2026:Supply and fixing one set of spreader/ terminal adapter kit Extended terminal for 4 pole MCCB of rating up to 125 A

90.14.28.4:S & F Motor starters of the following ratingsSemiautomatic star delta starter for 5 to 7.5HP motor

OD4387/2025-2026:Supply and providing of On Delay Timer switch (operating range from 0-30 sec.)

OD6081/2025-2026:Providing and fixing following multi function meter to read: V, A, F, 3 phase accuracy class 1 in existing panel and giving connection complete

OD6133/2025-2026:Supply and Installation of current Sensing Phase Failure & UV+OV relay with Dry run & Over load Protection (Delayed Auto reset, 2 CO Contact) on DIN rail (model:Minilec D2 MPR2).

OD6132/2025-2026: Supply and fixing 100/5 A, 5 VA, accuracy class 1, Tape wound Metering CT in existing panel board and giving connection as required

OD6134/2025-2026:Supply and Fixing of Blue colour LED indicator, AC/DC, 22.5 mm cut out dia

OD6135/2025-2026:Supply and Fixing of Red, Green, Black, Yellow, Orange colours LED indicator, AC/DC, 22.5 mm cut out dia

OD175225/2025-2026:Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589,IS 1239 i/c welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :100 mm dia

18.8.6:Providing, laying, testing and commissioning of C class heavy duty GI pipe conforming to IS 1239, i/c welding ,fittings, like elbows, tees, flanges, tapers, nuts ,bolts ,gaskets etc., and fixing the pipe on the wall , ceiling with suitable clamp or support frame and painting with two or more coats of synthetic enamel paints of required shades complete as required. 80 mm

18.11.5:Supplying, fixing, testing and commissioning of Butterfly Valve of PN 1.6 rating with bronze or gun metal seat duly ISI marked complete with nuts, bolts ,washers ,gaskets conforming to IS 13095 of following sizes as required:100 mm dia

18.14.5:Providing,installation,testing and commissioning of non-return valve of following sizes conforming to IS :5312 complete with rubber gasket, GI bolts , nuts, washers etc as required.100 mm dia

OD237235/2023-2024:Ball valve-Supply, installation, testing and commissioning of C.I. slim seal type ball valve with required flanges, nuts and bolts gasket etc. complete 25mm dia

OD80481/2025-2026:Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required

OD6333/2025-2026:Supply and installation of pressure guage,4" dial,0-200 psi range 3/8" BSP weather proof with stainless steel internals,siphon tube including fittings etc.

OD237236/2023-2024:Supply,installation,testing and commissioning of single acting Air Release Valve with screwed inlet 25mm dia etc.

OD80529/2025-2026:Supplying, Installation, Testing & Commissioning of Air cushion tank ( Air vessel) of continuous welded construction, fabricated out of atleast 8mm thick steel with dished ends, galvanised to IS:4736-1968 and supporting legs, 200mm dia & 1000mm height complete with necessary automatic air release cock , safety 25mm drain valve, pressure gauge, flange connection to the wet riser piping with necessary piping to meet the functional requirement of the system.

OD79469/2025-2026:Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Stainless steel

OD237234/2023-2024:Supply and providing Hose box Cabinet to accomodate one piece of 63mm dia fire hose along with one pair of 63mm dia male&female couplings and one branch pipe

OD80674/2025-2026:Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. a. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 b. 20 mm nominal internal dia gun metal globe valve & nozzle. c. Drum and brackets for fixing the equipmets on wall. d. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 m

OD80684/2025-2026:Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Stainless Steel (Grade 304)

OD80749/2025-2026:Supply, installation, testing and commissioning of weather proof hose cabinet having the size of 750x500x250mm made of 16gauge MS Sheet with PCC supports and full front front glass door and locking arrangements ssuitable to accodmmodate 2 nos 15m long hose pipes and 1 No. branch pie. The cabiner shall be painted to scarlet red colour outside and off white inside.

OD80752/2025-2026:Supply, installation, testing and commissioning of 4way Fire Brigade Inlet connection of 150 mm dia. built - in Gun metal Non- return valves instantaneous coupling type arrangement to be connected to down comer main.

OD237239/2023-2024:Supply and Installation of ABC stored pressure type 5 Kg capacity Fire Extinguisher with pressure indication complete conforming to IS 15683 with initial charging and Installation brackets etc as required

OD239921/2023-2024:Supply and installation, testing and commissioning of CO2 type fire extinguisher with 4.5 kg. Capacity complete with installation brackets conforming to IS15683 with ISI mark

17.1.9.1:Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.4 Zone

OD80875/2025-2026:Supply,installation,testing and commisioning of 4 zone Automatic Fire Alarm Control Panel conventional type micro processor based control made of MS sheet cabinet the powder coated,audio and digital visual display,circuit open short functions,test/evacuation mode,silence and reset options,common and zone wise hooter supply outputs,fault and fire mode auxiliary contacts with 24 DC volt output zone circuits,operating 230/50Hz AC volts

OD80883/2025-2026:Supply,installation,testing and commissioning of manual call point break glass type red colour powder coated MS/ABB box fix on existing wall/frame,24volt DC operated push OFF/ON switching mechanism with inner,outer frame,operation label and necessary attachments.

OD80885/2025-2026:Supplying,installing,testing and commissioning of Audio alarm hooter(sounder) powder coated MS/ABS box fix on existing wall/frame,24/12 volt DC operated siren circuit with diaphram speaker,maximum sound 60 db intensity under statutory with necessary attachment .

17.1.3:FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying, installation, testing & commissioning of manual call boxes of MS Construction in surface/recess with stainless steel chain & hammer assembly Complete with glass and push button etc. as required.

OD241506/2023-2024:Supply, Installation, Testing& Commissioning of Sealed Lead Acid Battery 12V DC 7AH for fire alarm control panel

17.1.2:FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying, installation, testing & commissioning of smoke detector with built-in LED and mounting base complete with all connections etc. as required.

17.1.8:FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying, installation, testing & commissioning talk back slave station in surface/ recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/ microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required.

17.5.2:CABLING & WIRINGSupplying & laying of 2x1.5 sq mm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

1.17.33:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 6 sq. mm

OD237242/2023-2024:Supply, conveyance and fixing Emergency Fire escape LED light fitting with 2 nos LED lamps, 7 AH SMF battery Charging unit Exit sign display etc complete in MS enclousure as required.

OD237245/2023-2024:Supply and erection of SIGNAGES-Led type "Fire EXIT" sign board of with battery backup

OD237244/2023-2024:Supply and providing in position of self glowing "FIRE DUCT" sign board of size 100x300mm made of luminescent safely,rigid sheet in given colour,photo luminescent rigid sheet with two each hanging chains and nacessary support to hang it on ceiling.

OD4300/2025-2026:Supply and erection in position laminated sheet of "FIRE EVACUATION PLAN "of suitable size fixed on wall & necessary accessories to fix the plan on wall

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD79468/2025-2026:Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler

OD237240/2023-2024:Supply, Installation, Testing and Commissioning of solid state Amplifier of 100 W RMS out put in rack, including necessory control wires, jacks etc. complete as required

OD237241/2023-2024:Supply & erection of MICROPHONE for Intelligible, crisp and bright sound suitable for all type of PA applications. Supplied with quick detachable holder with 3-pin professional XLR connector & 6 mtrs. Twin core shielded low noise cable.

OD237246/2023-2024:Preparation of necessary doccuments,forms,drawing,scheme,certificates etc.preparation of As built drawings procuring approvals for the drawings cordinating site inspection and statutory sanctions from the fire authority for the installation( Fee for challan not including)

Please Enable Macros to View BoQ information