Certain repairs to Wooden and Steel Furniture articles of OTM accn and Md accn in Army area Jodhpur

Amount

S&F top of the bin soiled linen after removing old damaged top duly functional with pino type hingis fixed with proper worksmenship with 18mm thick MDF board along with T/Wood beading well polished allaround.

S&F sides of bin solied linen after removing old damaged parts with proper worksmenship

S&F base of the bin linen after removing old damaged fixed with proper worksmenship with 18mm thick PPB.

S&F top of the bin solied linen large after removing old damaged top duly functional with pino type hingis fixed with proper worksmenship with 18mm thick PPB along with T/Wood beading well polished allaround.

S&F sides of bin solied linen large after removing old damaged parts with proper worksmenship

S&F base of the bin solied linen large after removing old damaged fixed with proper worksmenship with 18mm thick PPB.

polishing to the chair handicraft TPC 16 with best quality polish after removing all old polish and prepration of surfaces to obtain glossy look, all as per directions of Engr in charge

S&F new cushion 40d rapped in tapestry cloth not less than 200/- per meter after removing old cushion to chair dining long back.

S&F new seats PVC (blowplast/supreme/amco or equivlant) after removing old damaged seats with approprate screws and washers. Colour and pattern as approved by the engr in charge to chair school/chair umpire/chair examinator/ chair

S&F new hand rest on the chair examination / chair school / chair with hand rest made out of 18 mm thick plank of Teakwood well seasoned and attached withpino type hingis

Painting to the steel structure of the chair school/chair umpire/chair examinator in two coats

S&F new shutters of the locker bed side wdn only fixing 18mm thick MDF board with pino type hingis.

S&F new handles chrome plated 4" long with approprate screws to locker bed side wdn.

S&F new hasp and staple on the shutter with approprate screws to locker bed side wdn.

S&F new planks of hardwood shisham after removing the old planks of the shelves of the rack loundry.

S&F new legs to the rack loundry with new negs made out of shisham wood well seasoned.

Painting to the structure of the rack loundry with internally and externally with existing colour paint of best quality

S&F new planks of hardwood shisham after removing the old planks of the shelves of the rack side 3/4 spaces.

S&F new legs to the rack side 3/4 spaces with new negs made out of teakwood well seasoned.

Polishing to the rack side 3/4 spaces in two coats for glossy look with worksmenship after removing prepairing the surfaces as directed by the engr in charge

Supply and fixing of 12 mm thick ply BWR grade in favrication for various parts of wooden and steel furniture where ever required with material like fevical, steel scecues full threads only, fevicol sh, beading wooden / PVC as required, with full workman ship and work / joints all as directed by Engr - in - charge at site

Supply and fixing of 4 mm thick ply BWR grade in favrication for various parts of wooden furniture where ever required with material like fevical, steel scecues full threads only, fevicol sh, beading wooden / PVC as required, with full workman ship and work / joints all as directed by Engr - in - charge at site

Supply and fixing of MDF board 18 mm thick both side laminated and one side teak shade in favrication for any wdn or steel furniture required to repair at site or in bso stores yard etc with steel scecues full threads only, fevicol sh , beading wooden / PVC as required, with full workman ship and work / joints all as directed by Engr - in - charge at site colour, shade, pattern as approved by Engr - in - Charge.

Supply and fixing the first class hard wood of teak, well seasoned free from knots and cracks in single piece shall be fabricated for various parts of wooden furniture to make good the articles of furniture. The repairng with hard wood will include all major and minor parts of required sizes as in drg and as required during the repairs. the joints will be fixed with fevicol and shall be fixed approprately shown on drgs.

Dry cleaning to the chair visitors/ computer / revolving/ easy with cushion, chair writing padded, sofa chairs as requirement including cleaning with detergents with sy acides and all as per the directions of engr in charge (including seat and back) (Each chair = Seat & back of chair)

painting with the Preservative to the trustle store room wooden with creaosote oil and used Engine oil of mixed Ration 50 : 50. (FD-86)

S&F new mirror after removing old blurd damaged mirror 3.5 mm to 4 mm thick to hat stand.

S&F new peg sets 4" long chrome plated as per drg and as approved by engr in charge to hat stand.

M & L for Seats plank of first class hard wood well seasoned duly French polished finished and fixed with nuts and bolts with and including a coat of synthetic enamel paint to existing steel frame including taking out the old unsv Seat plank complete all as spfd and directed by Engr-in-Charge to form with back. (FD-78)

All as per Srl Item No 29 above but back plank of form with back

Supply and fixing legs,stiffeners of form with back made of Square conduit pipe 25mm size having 1.6mm wall thickness including taking out the old unsv parts including one coat of Red Oxide primer and painting the steel frames with one or more coat of synthetic enamel paint black complete all as spfd and directed by the Engr-in-Charge.

S&F of 12mm thick MDFboard teak shade for repairs in fabrication the table bed side, shape and size as per drg rest all as per Engr in charge

S&F of 6mm thick ply for repairs in fabrication the table bed side, shape and size as per drg rest all as per Engr in charge

Removing unserviceable part of Almirah large steel, Almirah 1/2 H 1/2 S, Almirah GD etc and supply and fixing the following new parts as per specified drawing and as directed by Engineer -in-Charge. Leg made out 1.00 mm thick MS Sheet (FD-67(M), FD-103, FD114(M), FD-104(M) FD-350)

Shelves made out of 1.00 thick MS Sheet a clip

Locking device

Door made out of 1.00 mm thick MS Sheet

Removing unserviceable part of Almirah medium steel, Almirah Med GD Etc and supply and fixing the following new parts as per specified drawing and as directed by Engineer -in-charge. Leg made out 1.00 mm thick MS Sheet (FD-67(M), FD-103, FD114(M), FD-104(M)

Shelves made out of 1.00 thick MS Sheet

Locking device

Door made out of 1.00 mm thick MS Sheet

Removing unserviceable part of locker bed side steel etc and supply and fixing the following new parts as per specified drawing and as directed by Engineer-in-charge. Leg mae out 1.00 mm thick MS Sheet (FD-1029)

Hasp & Staple MS CP

Door made out of 1.00 mm thick MS Sheet

MS CP Handle

S&F in repairs Chromium plated handle for Almirah any type (FD-67(M), 83(M), FD-1032,FD-114(M),FD-104(M), FD-350(M))

S&F in repairs steel lock with duplicate key (4 Liver). Make Godrej/Harison/Aligarh for almirah any type (FD-67(M), 83(M), FD-1032,FD-114(M),FD-104(M), FD-350(M)

Removing unserviceable part of Table office clerk steel, table typist steel and supply and fixing the following new parts as per specified drawing and as directed by Engineer - in- charge. complete Drawer box with acessories as per Drg made out of 1.00 mm thick MS Sheet ((FD-84(M), FD-1004)

All as per item No 48 above but Locke 4 liver of drawer with duplicate Key

Removing unserviceable part of table officer steel and supply and fixing the following new parts as per specified drawing and as directed by Engineer-in-charge. complete Drawer box with acessories as per Drg made out of 1.00 mm thick MS Sheet

All as per item No 50 above but Lockr 4 liver of drawer with duplicate Key

complete Drawer box for table 3x2 with acessories as per Drg made out of 1.00 mm thick MS Sheet (FD 1008)

Locke 4 liver of drawer with duplicate Key

S&F in repairs 18/19 mm thick Pre laminated particle board (ISI Marked) for table top of existing size and pattern with 4mm thick TW beading etc all as directed. Make :kitply/ancore/eco (ISI Marked) (FD-84(M)/ FD-1004/1003/ 1007/ 1008/1009/1018)

S&F in repairs MS Tube 25 mm Square, 16 Gauge welded to existing frame duly painted paint OG / Black as directed to match with existing surfaces all as directed. (FD-84(M), FD-1004 /1003, FD-165, FD-1007/1008, FD-1018)

Dismantling, taking out carefully old existing broken table top of the table dinning ORs of Alm sheet top of any description, and replacement of the same with S&F new Table top 18 mm thick plain particle board both sides commercial ISI marke of medium desity, flat pressed single layer type withBWR adhesive ISI marked 1.9 mtrs long and 0.685 mtrs width with including top covered 0.63 mm thick almunium sheet on top with 25mmx12 gauge stainless steel screws, 28 Nos with suitable washers on top made to shape, fixed in position, all as shown drawings and specified and as directed by th Engineer-in - Charge. (FD-165 (M)

Repair of chair computer / Revolving /Chair Padded Supply and fixing with welding work & removing and fixing of unserviceable part as per pattern of Durun / complete assy complete all as specified and directed by Engineer-in-Charge. (FD/E6/MAP/01/ /TP)

Removing of unserviceable fabric, foam cushions of seat and back and upholistring of existing chair computer with new fabric, new foam 50mm thick high density (32 density) for seat and back rest as per best trade practice Note : Min price range of cloth to be used Rs 200/- per mtr

Taking out U/S base for chair and S&F new base complete in all respects as pe requirement and duly functional, all as specified and directed.

Removing of U/S hand rest and S & F new hand rest of best quality as per sample available in BS Yard

replacement in Repair of padestal assembly as per sample available in BS Yard

Removing Old/unserviceable parts/components of chair CBA steel and supply and fixing new parts/components maching screws/nuts and bolts/welding etc as per details given below all as specified, shown of drg and as directed by Engineer-in-Charge. Seat frame duly caned in approved pattern made of teak wood (MP Teak) with black finish polish. (FD-75M)

Back frame duly caned in approved pattern with black finish polish.

Handle made out of 2nd class hard wood with black finish polish

PVC Caps black colour

PVC Shoes set of 4 black clour fixed with screw to chairs.

S & F of MS flatt 25x4mm jointing the pipes frame one end to other two Nos below the seat and frame of chair CBA by welding for providing support to the seat. As per engr in charge

Painting to the steel frame of the chair CBA with two coats of paint OG after prepration of surfaces properly with best quality paint as per PS

Removing Old/unserviceable parts/components of chair CBB steel and supply and fixing new parts/components of exiting size shape and pattern with appropriate scews/maching screws/nuts and bolts/welding etc as per details given below all as specified, shown of drg and as directed by Engineer-in-Charge. Seat frame duly caned in approved pattern made of teak wood (MP Teak) with black finish polish.(FD-75M)

Back frame duly caned in approved pattern with black finish polish.

PVC Caps black colour

PVC Shoes set of 4 black clour fixed with screw.

S & F of MS flatt 25x4x500mm jointing the pipes frame one end to other two Nos below the seat on frame of chair CBB by welding for providing support to the seat. All as per engr in charge

M&L of Painting to the steel frame of the chair CBB with two coats of synthick enamel paint OG colour after prepration of surfaces properly with best quality paint as per PS

BED HARD / Bed Newar S&F for long rail of size 65mmx50mmx1980mm long or 90mm x 35mm x 1980mm made out of hardwood including removing of old unsv long rail complete all as spfd and as directed by Engr-in-Charge. (FD 245, FD 246)

Removing of old unserviceable long rail of hard bed and assembling bed hard with short rail size 65mm x50mm x 900mm yt cutting long rail and providing tenon on both ends of short rail and making joints tight proof) Long rails retrieved from above serial item here-in-before, will be issued free for assembling complete all as per shown on drawing and as directed by Engr-in-Charge.

S&F for head board of hard wood except leg and shall be of well seasend sheesham wood of first quality head board shall be covered with 3mm thick ply wood teak facing on one side and commercial on the other side size & shape shown on drawing including removing of old unsv hard board complete all as spfd and as directed by Engr-in-Charge. Make of Ply : Kitply/Ancher/Green ply /Archid

S&F for foot board made of 1st class hard wood, except leg and shall be of well seasend sheesham wood of first quality Foot board shall be covered with 3mm thick ply wood teak facing on one side and commercial on the other side, size & shape shown on drawing including removing of old unsv foot board complete all as spfd and as directed by Engr-in-Charge. Make of Ply : Kitply/Ancher/Green ply /Archid

S&F Plywood commercial 12 mm thick fixed on long rail / side rail along with supports of Sheesham wood, size & shape shown on drawwing including removing of old unsv top complete all as spfd and as directed by Engr-in-Charge.

L.BHIMSEN

SK INDUSTRIES

PRAFUL ENTERPRISES

Shri Maruti Trading Co.