CONSTRUCTION WORK OF INFILTERATION WELL BEHIND FATEPURA WATER WORKS AT CHHOTA UDEPUR NAGARPALIKA UNDER: 15TH FINANCE (UNTIED) GRANT YEAR-2025-26

Sr. No. Description Qty. Rate Per Amount

Sinking single circular well of internal diameter and thickness of

steining as specified up to the level as specified in all sorts of soil

including hard murrum, boulders and all strata type & strata up to

the level as per drawing by dredging, dewatering, drop chiselling

with necessary kentiedge and with mechanical means as may be

1 necessary for this type of work including all labour, plant machinery

etc. complete. Zero level to be considered from cutting edge level.

Including all labour charges with Dewatering but Excluding cost of

Cutting Edge & Well steining. Well Excavation by sinking. For 6.0 mt

internal dia well incl. Dewatering. For 0.00 to 3.00 Mt.

Excavation for well including removing and spreading the excavated

stuffs directed with all lead. In hard rock with blasting and chiselling

or by chiselling/ Breaking only for finishing. For 9.0 to 10.50 Mt.

Depth. 66.50 895.85 Cu.m

Dewatering by pumping set of required capacity including temporary

platform carting pumping at site and fixing the same in position

including all accessories, and fuel and labour etc. complete.

Excavation for foundation in sand, gravel, clay soft soils and murrum

etc. including shoring, strutting dewatering as necessary and

4 disposing of the excavated stuff as directed. (A) Depth upto 3.0 M.

and lead upto 100m for 10 Cu.m.

Providing and casting in situ mass cement concrete in grade M-10

(approx. corresp. to prop. 1:3:6) using granite quartzite trap metal of

5 size 12 mm to 25 mm incl. consolidation curing etc. complete.

Without Forms Work. 6.00 4211.30 Cmt.

Filling available excavated earth (excluding rock) in trenches. plinth,

sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming and watering.

SBD SECTION-7 BILL OF QUANTITIES-155

Sr. No. Description Qty. Rate Per Amount

Providing and cast in situ C.C. in grade M-20 (approx. corresp. to

prop. 1:1.5:3) (proportions as per mix design or as per table 9 of

IS456 2000 in masses by weigh batching ) using quartzite trap metal

of size 12 mm to 20 mm and or 6 mm to 12 mm including scaffolding

7 centering form work, needle vibrated consolidation, curing and

hydraulic testing etc. complete (excluding cost of reinforcement) with

centering and shuttering/ deshuttering etc. complete up to 6 meter

height/depth from Av. G.L. for all structures with water proofing

compound. For Bottom Beam. 11.00 7730.30 Cu.m

7.1 Top Beam 6.50 7730.30 Cu.m

7.2 Well Staining Above & Below G.L. 130.00 7795.85 Cu.m

7.3 Top Dome 8.00 8082.20 Cu.m

7.4 For Pipe Encasing 40.00 6348.00 Cu.m

Supplying cutting, bending, binding and placing in position steel as

per plan and design and as per ISS 2502 including cost of steel and

8 binding wire for reservoirs/ structures only including lift up to 6 meter

height or depth below G.L. for all diameters. Do-CRS steel all

diameter Fe 500 grade confirming to relevant I.S. 17.20 90363.55 MT

Providing fabricating and placing cutting edge and curbs as per

design and drawing manufactured from structural steel or M.S. plate

9 confirming to ISS 226-1962 incl. Riveting, welding etc. complete.

incl. M.S. bars, anchor bolts and structural steel etc complete.

Cement plaster 20 mm thick in C.M. 1:2 using water proofing

compound of approved quality including finishing etc. complete. 131.00 232.30 Sqm

Manufacture, Supply & Delivery of Electric Resistance Welded (Up

to 400mm)/Submerged Arc Welded (Above 400mm) M.S. Pipe

having beveled ends plate or coil conforming to IS-3589-2001 or its

latest revision/ ammendment for following thickness outside

diameter at GWSSB store or site anywhere in Gujarat State

including all taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading conveyance to Departmental

stores, stacking etc. all complete. I/S Solvent free Liquid Epoxy

Lining (406 micron) + O/S 3 LPE Coated M. S. Pipe. 219.1mm Dia &

6.3mm Thick. 50.00 3099.00 Rmt.

Lowering, laying, jointing & welding in position to correct line & level

M.S. Pipe with outerside 3 LPE coating & inside solvent free liquid

epoxy lining on pedestal or chairs upon prepared formation or

prepared bedding in trenches the rates include conveyance from

store to site of work loading, unloading, heat shrink sleev jointing

hydrotesting etc. complete. 219.1mm Dia 50.00 336.95 Rmt.

13 M.S. Specials. Flange Ended. Upto 300mm Dia. 400.00 98.00 Kg.

SBD SECTION-7 BILL OF QUANTITIES-156

Sr. No. Description Qty. Rate Per Amount

Providing and supplying ISI mark CI D/F Sluice Valves as per

IS:14846 (Latest Edition) of following class and diameter including

all taxes, insurance, transportation, freight charges, octroi,

14 inspection charges, loading, unloading, conveyance to departmental

stores, stacking etc. complete. --do-- for 200 mm Dia. PN-1.6 With

Hand/ Wheel Operated (Alt-2 type Long Body)

Lowering, laying and jointing in position following C. I. / D/F Reflux

valves, Butterfly valves, Sluice valves and Air valves including cost

of all labour, jointing material, including nut bolts and giving

satisfactory hydraulic testing, etc. complete.--do-- for 200 mm Dia.

PN-1.6 With Hand/ Wheel Operated (Alt-2 type Long Body).

Providing and fixing 50 cm wide M.S. Ladder fabricated from M.S.

Flats 10 mm x 75 mm with 20 mm dia steel bar steps in double

16 rows, @ 30 cm C/C. The include stays of 10 mm x 50 mm flats fixed

at 3 meter C/C with welding anchoring and 3 coats anticorrosive

paint. 15.50 3392.50 Rmt

Providing and Fixing C.I. Manhole Frame and Cover of All Type

having Weight 50 to 75 Kgs. 150.00 58.00 Kg.

Providing C. I. Cowl Type ventilator with air filter & Jali etc.

complete. For 150mm Dia. 50.00 58.00 Kg.

Fixing C. I. cowl type ventilator in C. C. 1:2:4 with bolts and nuts etc.

19 complete including cost of jointing materials. For 150mm Dia

Add 18% GST Rs.

Add 2% For Contengency Charges.

Add 1% For Labor Cess.

I / We am/are willing to carry out the work at _____________ % above / below (percent should be written in figure and in words) of

the estimated rates mentioned above. Amount of my/our tender works out as under.

( In words ) ____________________________________________________ Percentage above / below the estimated rate.

Estimated Amount put to tender Rs.

Deduct _______ % below Rs. Rs.

Estimated Amount put to tender Rs.

Add _______ % above Rs. Rs.

Total Amount Rs.

Total Amount Rs.

*( Please strike out whichever is not applicable)

SBD SECTION-7 BILL OF QUANTITIES-157

Sr. No. Description Qty. Rate Per Amount

Note :1 All work shall be carried out as per Public Works Department Hand Book and other specifications of Division or as directed.

Note :2 Rates quoted include clearance of site (prior commencement of work and its close) in all respects and hold good for work

Note :3 I/ We have read the conditions mentioned in this tender and agree

to abide by the same.

Signature of Contractor President Chief Officer

ChhotaNagarpalika

Udepur Nagarpalika Chhota

udepurNagarpalika

Chhota Udepur Chhota Udepur

SBD SECTION-7 BILL OF QUANTITIES-158