E Tender for the Setting up of Cafeteria at Thiruvananthapuram

E Tender for the Setting up of Cafeteria at Thiruvananthapuram For more details refer tender documents

Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Supply and installation of cushion Over GI Pipe structure and creating a seating area above the drainage pipe to make the look more aesthetic to the seating

Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).6 mm thick cement fiber board as per IS: 14862

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminum Cornposite Panel Cladding, with open grooves for linear as well as curvilinear porlions'of the building , fbr all heights and all levels etc. including Structural analysis &, design and preparation of shop drawings for pressuie equalization or rain screen principle as required, proper drainage of water to make it watertight including.checking of all the structural and functional design, Providing, fabricating. and supplying and flxing panels of alurninum composite panel cladding iri pan shape in metallic colour of approved shades made out of 4 mm thick aluminurn composite panel material consisling of 3mm thick FR grade mineral core sandwiched betrveen two Aluminun: sheets (eachO.5rnm tlrick) The aluminum cornposite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon baied fluoropolymer resin coating of,approved colour andl shade on face # I and polyrner (service) coating on,face #,.2 as specified. using stainless steel screws, nuts. bolts, washers cleats. weather silicone sealant, backerrods etc. The fastening brackets of Alurninium alloy 6005 T5 /MS with Hot Dip Galvanized with serration,and serrated washers to arrest the wind Ioad movernent, fasteners, SS 316 pins and anchor bolts of approved make in SS 3I6, Nylon separators top revent bi-metallic contacts all complete required to perform as per specification and drawing The it includes cost of all material & camp labour component, the cost of all mock UPS at site, cost of all samples or the lndivldual components for testing in an approved laboiatory, field tests on the assembled working curtain wall with aluminium composite panel.clading. cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of.the building for occupation. Base frarne work for ACP cladding is.payable under the relevant aluminium iterns The Contractor shall provide curtain wall with aluminum conrposite panel cladding, having all the performance characteristics all complete, as pe,the Architectual drawings,.as per itern description, as specified as per,.the.,approved shop drawings and as directed by the engineer in charge ,however, tor.the.purpose of payment, only the actual area on the"external face of tne curtaln wall wtth Aluminum composite.Panel Cladding (including width of groove) shall be rneasured in sqm. up to two decimall places

Cutting/Modification of the existing structure andinstallation withglass

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturar) with water absorption less than 0.08% and conforming to IS 15622, of.appoved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc, complete size of Tiles 800 x 800 mm

The work includes the supply and installation of a puffed roof covering for the canteen area, having an overall size of 10m x 10 m. The roofing system will be. supported on a robust RCC frame work designed to provide adequate strength. stability, and.long-term durability. High-quality puffed roofing sheets will be used to ensure superior thermal insulation, weather resisiance, and low maintenance. All necessary structural members, fixtures, anchoring, and finishing works will be provided to complete the installation in a safe and efficient manner. The roofing will offer effective protection against heat and rain, while enhancing the overall utility and comfort of the canteen space.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 wlth C.l brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting.and making good the walls whereever required .Kitchen sink without drain board 470 x 420 mm bowl depth 178 cm

Providing and fixing wash basin with C.I.. Brackets 15 mm CP brass pillar taps, 32 mm C.P brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever require. White Vitreous China Wash basin size 630 x 450 mm with a pair of 15 mm C.P brass piler taps

Providing and fixing.C,P brass Iong body bib cock of approved quality conforming to IS standareds and weighing not less than 690 gsm 15 mm nominal bore

Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS 893115 mm nomonal bore

Providing and fixing PVC Pipes, fittings including fixing the pipe with clamps at 1 m spacing This including of Pipes & amp: fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall,

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow

Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee

For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)

LS Amount for Electrification