Construction of Nagarpalika Library at Chorwad, Dist. Junagadh (2nd Attempt)

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Clearing and grubbing road land including uprooting rank vegetation grass Twenty Eight

bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees Thousand Four

1 cut earlier and disposal of unserviceable materials (C) By mechanical means in 0.12 28,455.09 Hundred Fifty

area of light jungle Five Rupees Nine

Excavation for foundation upto 1.5 m depth including sorting out and stacking of Six Hundred

useful materials and disposing off the excavated stuff upto 50 Meter lead.(E) Hard Cmt Twenty Seven

Rock Rupees Forty

Seven Paise

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and

Six Hundred Fifty

stacking of useful materials and disposing off the excavated stuff upto 50 Meter One Rupees

3 lead.(E) Hard Rock Cmt 120.40 651.26

Twenty Five

Filling in plinth and foundation with sand under floors including watering Four Hundred

ramming, consolidating and dressing complete Eighty One

Rupees Eighty

Three Hundred

thickness including watering, ramming and consolidating etc. complete. (more One Rupees

5 than 10 ton) Cmt 671.80 301.78

Seventy Seven

Filling available excavated earth (excluding rock) in trenches. plinth,

One Hundred

sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating

6 Cmt 0.00 136.92 Thirty Six Rupees

each disposited layer by ramming and watering. Ninety One Paise

Carring out plinth treatment to post construction / existing structure by spraying

chemical solution for termite control treatment including labour and material

consistent with I.S.I specification. Using Chlordane and Chiorpurfiles 20 EC. As Per

6131_paret-II Concentration Weight one percent is recommended i.e one liter 20 Fifty Nine Rupees

EC chemical emulsion with 19 liter give 1 % concentration inclusive of one liter Forty Five Paise

chemical emulsion application at the rate of 5 Liter chemical/ Sqm of surface is

recommended as per I.S. (The Product performance shall carry Guarantee for

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4-

Three Thousand

graded stone aggregates 20 mm nominal size) and curing complete excluding cost Eight Hundred

8 of formwork in (A) Foundation and Plinth Cmt 134.70 3,805.29 Five Rupees

Twenty Eight

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6-

Four Thousand

crushed stone aggregates 20 mm nominal size) and curing complete including One Hundred

9 cost of formwork in (A) Wall Caps / Coping Cmt 0.00 4,152.60

Fifty Two Rupees

Sixty Paise

GRADE SLAB (M200) : Providing and laying controlled cement concrete M.200

Concrete with all lead, including all transportation, pumping, pouring, curing of Four Thousand

10 concrete etc complete including the cost of formwork but excluding the cost of Cmt. 37.10 4,900.07 Nine Hundred

reinforcement for reinforced concrete work in M200 Grade Slab Rupees Six Paise

Providing and laying controlled cement concrete M:25 and curing complete

Four Thousand

including cost of necessary, form work, compacting with vibrator curing centering

Eight Hundred

& shuttering in true line and level etc, but excluding the cost of reinforcement for

11 Cmt. 61.70 4,825.78 Twenty Five

RCC work in Foundations footings, base of columns and Raft etc., for any type of Rupees Seventy

cross section area complete as directed by E. I. C. Eight Paise

Providing and laying controlled cement concrete M:25 and curing complete

Six Thousand

including cost of necessary, form work, compacting with vibrator curing centering

Eight Hundred

& shuttering in true line and level etc, but excluding the cost of reinforcement for

12 Cmt. 11.00 6,888.20 Eighty Eight

RCC work in column up to plinth lvl. etc., for any type of cross section area Rupees Twenty

complete as directed by E. I. C. Paise

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing centering Six Thousand

& shuttering in true line and level etc, but excluding the cost of reinforcement for Eight Hundred

RCC work in TIE, GROUND, & PLINTH BEAMS for any type of cross sectional area. Seven Rupees

etc., complete as directed by E. I. C. Forty Paise

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing centering Seven Thousand

& shuttering in true line and level etc, but excluding the cost of reinforcement for Nine Hundred

14 RCC work in (F) Wall (Vertical and horizontal fins)., & (F1) Wall cap & coping up to Cmt. 28.50 7,956.78 Fifty Six Rupees

G.F. level., etc. Complete, as per detailed & directed by Architect / Consultant & Seventy Eight

and directed by EIC. Paise

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing centering Seven Thousand

& shuttering in true line and level etc, but excluding the cost of reinforcement for Nine Hundred

15 RCC work in (F) Wall (Vertical and horizontal fins)., & (F1) Wall cap & coping For Cmt. 2.50 7,998.39 Ninety Eight

First Floor level., etc. Complete, as per detailed & directed by Architect / Rupees Thirty

Consultant & and directed by EIC. Nine Paise

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing centering

& shuttering in true line and level etc, but excluding the cost of reinforcement for

Eight Thousand

16 RCC work in (F) Wall (Vertical and horizontal fins) & (F1) Wall cap & coping For Cmt. 0.20 8,040.00

Forty Rupees

For Second Floor level., etc. Complete, as per detailed & directed by Architect /

Consultant & and directed by EIC.

Providing and laying controlled cement concrete M:25 and curing complete

Seven Thousand

including cost of necessary, form work, compacting with vibrator curing centering

Nine Hundred

& shuttering in true line and level etc, but excluding the cost of reinforcement for

17 Cmt. 17.50 7,942.44 Forty Two

RCC work in (D) For Columns for any type of cross sectional area for G.F. Lvl. etc., Rupees Forty

for any type of cross section area complete as directed by E. I. C. Three Paise

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing centering Seven Thousand

& shuttering in true line and level etc, but excluding the cost of reinforcement for Nine Hundred

18 RCC work in (D) For Columns for any type of cross sectional area Work at First Cmt. 15.60 7,984.05 Eighty Four

floor etc., for any type of cross section area complete as directed by E. I. C. Rupees Five

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing centering

Eight Thousand

& shuttering in true line and level etc, but excluding the cost of reinforcement for

Twenty Five

19 RCC work in (D) For Columns for any type of cross sectional area Work at Second Cmt. 5.30 8,025.66

Rupees Sixty Six

floor etc., for any type of cross section area complete as directed by E. I. C. Paise

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing centering

& shuttering in true line and level etc, but excluding the cost of reinforcement for Seven Thousand

RCC work in LINTLE-BEAM, LINTEL & SILL & COPING for all cross sectional area at Fifty Rupees

G.F. Lvl. etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing centering Seven Thousand

& shuttering in true line and level etc, but excluding the cost of reinforcement for Ninety One

RCC work in LINTLE-BEAM, LINTEL & SILL & COPING for all cross sectional area at Rupees Sixty One

F.F. Lvl. etc., complete as directed by E. I. C. Paise

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing centering Seven Thousand

& shuttering in true line and level etc, but excluding the cost of reinforcement for One Hundred

22 RCC work in LINTLE-BEAM, LINTEL & SILL & COPING for all cross sectional area at Cmt. 4.40 7,133.23 Thirty Three

Rupees Twenty

S.F. Lvl. etc., complete as directed by E. I. C.

Providing and laying Controlled cement concrete M:25 and Curing Complete for

reinforced concrete Chhajjas up to all floor two level including finishing the Seven Thousand

exposed surfaces with cement mortar 1:3 (1-cement, 3 Fine sand) to give a Eighty Two

smooth and even surface centering and formwork and curing complete excluding Rupees Twenty

cost of reinforcement. etc., complete as directed by E. I. C. Two Paise

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing centering

& shuttering in true line and level etc, but excluding the cost of reinforcement for Seven Thousand

RCC work in SLAB BEAMS for Ground floor & Super structure, & for any type of Fifty Rupees

cross sectional area. etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing centering Seven Thousand

& shuttering in true line and level etc, but excluding the cost of reinforcement for Ninety One

RCC work in SLAB BEAMS at First Floor & for any type of cross sectional area. etc., Rupees Sixty One

complete as directed by E. I. C. Paise

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing centering Seven Thousand

& shuttering in true line and level etc, but excluding the cost of reinforcement for One Hundred

26 RCC work in SLAB BEAMS at Second Floor to Terrace Floor & for any type of cross Cmt 5.20 7,133.23 Thirty Three

Rupees Twenty

sectional area. etc., complete as directed by E. I. C.

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Providing and laying controlled cement concrete M:25 and curing complete

Six Thousand

including cost of necessary, form work, compacting with vibrator curing centering

Eight Hundred

& shuttering in true line and level etc, but excluding the cost of reinforcement for

27 Cmt 13.20 6,825.08 Twenty Five

RCC work in Staircase with steps / Kadi Tappa, waist slab and landing at any Rupees Seven

height and level as directed etc., complete as directed by E. I. C. Paise

Providing and laying controlled cement concrete M:25 and curing complete

Six Thousand

including cost of necessary, form work, compacting with vibrator curing centering

Eight Hundred

& shuttering in true line and level etc, but excluding the cost of reinforcement for

28 Cmt 43.40 6,857.80 Fifty Seven

RCC work at Plinth to Ground FLOOR SLAB for all thickness/cross section etc. Rupees Seventy

complete as directed by E. I. C. Nine Paise

Providing and laying controlled cement concrete M:25 and curing complete

Six Thousand

including cost of necessary, form work, compacting with vibrator curing centering

Eight Hundred

& shuttering in true line and level etc, but excluding the cost of reinforcement for

29 Cmt 33.40 6,899.31 Ninety Nine

RCC work at FIRST FLOOR SLAB for all thickness/cross section etc. as directed by Rupees Thirty

E. I. C. One Paise

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing centering Six Thousand

& shuttering in true line and level etc, but excluding the cost of reinforcement for Nine Hundred

RCC work in SECOND FLOOR SLAB for all thickness/cross section etc. complete as Forty Rupees

directed by E. I. C. Ninety Two Paise

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

Seventy Seven

31 binding and placing in position complete upto ground floor level Kg 33645.00 77.29 Rupees Twenty

Eight Paise

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, Seventy Eight

32 binding and placing in position complete upto First floor level Kg 10883.00 78.34 Rupees Thirty

Three Paise

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, Seventy Nine

33 binding and placing in position complete for Second floor to terrace floor Lvl. Kg 3813.00 79.39 Rupees Thirty

Eight Paise

Brick work using common burnt clay building bricks having crushing strength not

Four Thousand

less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6. (1- Two Hundred

34 Cement : 6 -fine sand)(B) Conventional Cmt 50.10 4,214.33

Fourteen Rupees

Thirty Two Paise

Brick work using common burnt clay building bricks having crushing strength not Four Thousand

less than 35 kg./Sq.Cm. at Ground floor Lvl. in cement Mortar 1:6 (1-Cement :6- Four Hundred

35 finesand) (B) Conventional For Ground Floor etc. Complete. Cmt 82.50 4,496.05 Ninety Six

Rupees Four

Brick work using common burnt clay building bricks having crushing strength not Four Thousand

less than 35 kg./Sq.Cm. at First floor Lvl. in cement Mortar 1:6 (1-Cement :6- Five Hundred

36 finesand) (B) Conventional For First Floor etc. Complete. Cmt 45.30 4,538.48 Thirty Eight

Rupees Forty

Seven Paise

Brick work using common burnt clay building bricks having crushing strength not

Four Thousand

less than 35 kg./Sq.Cm. at Second floor to terrace floor Lvl. in cement Mortar 1:6

Five Hundred

37 (1-Cement :6-finesand) (B) Conventional For above First Floor to Terrace Floor Cmt 26.40 4,580.91

Eighty Rupees

etc. Complete, as per detailed & directed by EIC. Ninety Paise

Half brick masonry in common brunt clay building bricks having crushing

Six Hundred

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse Eighty Four

38 sand ) (B) Conventional half brick masonry at Ground Floor level.(B) Conventional Smt 117.00 684.26

Rupees Twenty

Half brick masonry in common brunt clay building bricks having crushing

Six Hundred

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse

39 Smt 98.00 690.57 Ninety Rupees

sand ) (B) Conventional half brick masonry at First to Terrace Floor Lvl.(B) Fifty Six Paise

Conventional

Half brick masonry in common brunt clay building bricks having crushing Six Hundred

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse Ninety Six

sand ) (B) Conventional half brick masonry at Terrace Floor Lvl.(B) Conventional Rupees Eighty Six

Providing & Fixing chicken mesh jali at R.C.C. masonry joints at any height with all

Three Hundred

labour & material, etc. Complete, as per detailed & directed by EIC. Twenty Six

Rupees Twelve

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of One Hundred

single or half brick walls for interior plastering for Ground floor level and finished Seventy Two

even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Rupees Four

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of One Hundred

single or half brick walls for interior plastering for First floor level and finished Ninety Five

even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Rupees Ninety

Four Paise

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of Two Hundred

single or half brick walls for interior plastering at Second Floor to Terrace floor Nineteen Rupees

level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Eighty Three

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Providing 10mm thick cement plaster in single coat on brick/concrete Ceiling for

One Hundred

interior plastering for Ground Floor level and finished even and smooth in (ii)

45 Smt 293.30 155.35 Fifty Five Rupees

Cement mortar 1:4 (1- cement :4-sand) Thirty Four Paise

Providing 10mm thick cement plaster in single coat on brick/concrete Ceiling for

One Hundred

interior plastering for First Floor level and finished even and smooth in (ii) Seventy Nine

46 Cement mortar 1:4 (1- cement :4-sand) Smt 266.60 179.24

Rupees Twenty

Four Paise

Providing 10mm thick cement plaster in single coat on brick/concrete Ceiling for

Two Hundred

interior plastering at Second Floor to terrace floor Lvl. and finished even and

47 Smt 51.20 203.14 Three Rupees

smooth in (ii) Cement mortar 1:4 (1- cement :4-sand) Fourteen Paise

Providing and applying ready mix concrete plaster on RCC elements to give

expose finish including 2mm thick base coat of same material and 3mm thick top

One Thousand

coat of concrete platser of approved shade and brand. Job includes proper griding

48 Smt 456.60 1,016.12 Sixteen Rupees

of RCC joints before applying plaster complete with scafolding directed as per Twelve Paise

Architect and EIC

Providing 20mm thick double coat external cement plaster on brick/ concrete

work for plastering comprising of base coat of 12mm thick cement plaster in Two Hundred

cement mortar (1 Cement:4 coarse sand) in rough finishing and 8mm thick top Eighty Three

coat of cement mortar 1:2 (1 Cement: 2 Coarse sand) finished rough / with Trovel Rupees Ninety

including scaffolding curing etc. complete. Five Paise

Washed stone grit plaster on exterior walls height upto 10 metre above ground

level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse

sand ), furrowing the under layer with scratching tool, applying cement slurry on

the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement Nine Hundred

plaster 1:1/ 2:2(1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal Ninety Five

size), in panels with groove all around as per approved pattern, including Rupees Thirty

scrubbing and washing the top layer with brushes and water to expose the stone Paise

chippings ,complete as per specification and direction of Engineer-in-charge

Add for plaster groove in plastered surface or moulding to R.C.C. projections. Forty Three

51 Rmt 551.90 43.05 Rupees Four

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty

One Thousand

:1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with

52 Smt 486.90 1,019.39 Nineteen Rupees

pigment to match the shade of slab including rubbing and polishing etc. complete. Thirty Nine Paise

25mm thick

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting

Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse One Thousand

sand) and jointed with gray cement slury mixed with pigment to match the shade One Hundred

of slab including rubbing Nine Rupees

and polishing etc. complete. Seven Paise

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of

One Thousand

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing

Four Hundred

flooring by adhesive material including dismentaling of existing flooring and

54 Smt 33.50 1,467.72 Sixty Seven

jointed with color cement slurry including finised with flush pointing & cleaning Rupees Seventy

the surface etc. complete for antiskit. Two Paise

Providing and laying Vitrified glazed tiles 8 to 10 mm thick 24" x 24" or as One Thousand

specified in skirting risers of steps and dedo on 10mm thick. cement plaster 1:3 (1- One Hundred

55 cement: 3-coarse sand) and jointed with white cement slurry as per the detailed Smt 250.90 1,195.02 Ninety Five

by Architect & direction of Engineer-in- Charge. Rupees Two

Providing and laying Ceramic tiles 6mm thick in flooring, treads of steps and

landing laid on a bed of 12mm thick Water proof cement plaster with mortar 1:3

(1-cement : 3- coarse sand ) & Water Proofing Chemical Agent and cement vata

One Thousand

(10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat cement

56 Smt 34.00 1,096.00 Ninety Six

finishing, watering etc. complete finishing with flush pointing in white cement. Rupees

(For UG tank flooring)

Providing and laying Ceramic tiles 6mm thick in skrting, risers of steps and dedo

One Thousand

on 10mm thick Water proof cement plaster with mortar 1:3 (1-cement : 3- coarse

Two Hundred

sand ) & Water Proofing Chemical Agent and finishing with flush pointing in white

57 Smt 99.00 1,283.76 Eighty Three

cement. (For UG Tank walls) Rupees Seventy

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Providing and fixing 18 mm thick gang saw cut, mirror [Hi-Gloss] polished at all

exposed Surface, Pre-moulded and pre-polished, machine cut Granite of any

colour and shade, & finish, as per detailed by architect / Consultantfor flooring,

dado skirting, cladding, steps and risers, kitchen platforms, vanity counters,

window sills , fascias and similar locations of required size, approved shade,

colour and texture laid over 20 mm thick mortar 1:4 (1 acid proof cement : 4 Three Thousand

Four Hundred

58 coarse sand). And In dado/skirting on In dado/skirting on 12 mm thick mortar 1:4 Smt 159.00 3,400.27

(1 acid proof cement : 4 coarse sand), joints treated with white cement, mixed Rupees Twenty

with matching pigment, epoxy touch ups, including Spacer tape 6.4 mm thick x 4 Six Paise

TO 6 mm as per detailed groove, rubbing, curing, moulding and polishing to edges

to give high gloss finish as per concept etc. complete at all levels.

Providing and laying Rough Kota stone slab flooring over 20mm (Average) thick

One Thousand

base of cement mortar 1:6 (1-cement : 6- coarse sand) or L.M. 1.1.5 laid over and

59 Smt 106.00 1,090.70 Ninety Rupees

jointed with grey cement slurry including rubbing and polishing etc. complete. (B) Sixty Nine Paise

30mm thick.

Providing and fixing sandwich type platform including supplying and fixing granite

stone 18 mm thick mirror polished stones in top and side position and vertical Seven Thousand

strip at front over 25 mm thick polished kota stone platform fixing in top and Four Hundred

60 sides and intermediates supports fixing with cement mortar and adhesive and Smt 3.00 7,478.49 Seventy Eight

finishing including making recess for Kitchen/ Laboratory sink etc. complete as Rupees Forty

approved and directed by Consultant / EIC. Nine Paise

Providing and laying broken chine mosaic flooring for terrace using 12 mm to

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or

Seven Hundred

slope and to be tempered to bring mortar creme out upto surface using white

Seventy Nine

61 cement including rounding off junctions and extending them upto 15 cm along Smt 275.30 779.70

Rupees Sixty

the wall,clearing with water and oxalic acid etc. as directed. (The Product Nine Paise

performance shall carry Guarantee for 10 years)

Providing and laying cement concrete flooring 1:2:4 (1-cement:2-coarsesand: 4-

Three Hundred

graded stone aggregate 20mm nominal size) laid in one layer and finished with a Thirty Nine

62 floating coat of neat cement. (B) 50mm thick. Smt 29.30 339.08

Rupees Seven

Providing wood work in frames of Size 12.5 x 10 Cm. for doors, windows,

clerestory windows and other frames, wrought framed and fixed in position with

hold fast lugs or with dash fasteners of required dia & length Incl. Providing and

fixing 35 mm thick (or as specified) ISI marked flush door shutters conforming to

IS : 2202 (Part I) decorative type, core of block board construction with frame of

1st class hard wood, with 1mm. thk, ISI marked designed laminate in any finish on Six Thousand

both faces of shutters., slit openings with bidding Patti & 6mm thk designed acid Seven Hundred

63 wash glass,. Stainless Steel butt hinges [125x65x2.5mm. IS1281712] with Smt 41.20 6,771.29 Seventy One

necessary screws, using branded S.S. matt /glossy / platinum finished Rupees Twenty

Nine Paise

accessories, Colour / polishing all bidding parts, and also incl. with all Material,

labour, tools, tolerance, scaffolding etc. complete as per concept /direction and

approved by Architect, and directed by Engineer-In-Charge.

Providing & Fixing Walnut anodized Aluminum Hi-Profile sections (JINDAL-DOMAL

Series OR Equivalent), hI-perfomance Sliding/ Openable window/door with

Required thick toughened designer glass of Saint Gobain or equielent, is used for

Aluminum Hi-Profile Section with necessary accessories and with additional

shutter with Stainless Steel Mosquito net. [In Opening Position always one of

Mosquito net shouter should be in Close Position], captive bead, extremely

difficult to remove once glazed, high performance weather stripping, internal

wedge gasket, Bottom, side and top section including necessary filling up the gaps

Seven Thousand

at junctions, with required EPDM rubber/ etc. and ISI ebco make,"Lx. Premium" Seven Hundred

64 Required Finish door fixture Accessories As per Architect Concept, High security Smt 112.40 7,742.61 Forty Two

interlocking bead, Sheet membrane flashing , 2" over jamb flashing, New Blocking Rupees Sixty

with new backer rod and sealant, channel glide with runner, slide fold hinge when Paise

ever need of sufficient capacity, with warranty, all types of material, labour,

transportation, tools tolerance and matching required level with Flooring etc.

complete as per Architect concept and as per detailed by Architect / consultant &

Directed by EIC.

Providing and fixing standared extruded of alluminium section of size 63mm x One Thousand

38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame for One Hundred

65 ventilation with 5 mm thick frosted glass as details etc complete for Ventilation Smt 4.50 1,175.56 Seventy Five

Rupees Fifty Five

Providing and fixing hydraulic door closer of approved size and make as directed

Six Hundred

66 engineer in charge. all lift, level and leads. Each 10.00 639.11 Thirty Nine

Rupees Ten Paise

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Providing & Fixing M.S. grills of required pattern to wooden frames of windows,

RCC or as specified in drawings etc. with M.S. flats at required spacing & frame One Hundred Six

67 around, square or round bars with round headed bolts & nuts or by screws (A) Kg 4005.00 106.23 Rupees Twenty

Plain Grill, as per detailed & directed by EIC. Three Paise

Providing, supplying, fixing, fabricating, erecting, aligning the structural steel like

pivot ,tubular 'T', 'I" section, angle, plate, beam, channel section, Bar , hollow box

or Z purloins, Round or Square Pipes, of approved make, for built up purloins,

roof trusses, columns, side runners, tie beams, sag rods, base plates gusset

plates, cap plates, bearing bracing, gantry girders, rails, require support, pipes,

including all welded or bolted steel structures of various types with approved I.S.I.

mark electrodes, bolts, anchor bolts including cost of thread, Anchor plate cleats

etc. in RCC or masonry work, including cutting, bending, welding ,fixing, supplying

, Fabricating Decorative fevisted section or any structured member required to One Hundred

Thirty One

68 complete the job for Bridge, Trusses, Canopy, doors, Frame, Railing, Entrance Kg 1756.00 131.83

gate, pergola, Decorative hanging light , New window, parking shed or space Rupees Eighty

frame or any other required specified area as shown on drawing and detailed

specification or as per design incl. three coats of approved brand primer and two

coats of paints, necessary scaffolding, tools tolerance etc. complete as directed

by Engineer In Charge. (payment will be made for weight of metal used in the

Finishing wall with Weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape even shade after thoroughly brushing the surface One Hundred

69 to remove all dirt, and remains of loose powdered materials.etc complete. Smt 801.90 120.26 Twenty Rupees

Twenty Six Paise

Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of primer at

Wall painting (two coats) with plastic emulsion paint of approved brand & One Hundred

manufacture on undecorated wall surfaces to give an even shade including Twenty Three

thoroughly brushing the surface free from mortar droppings & other foreign Rupees Forty

matter & sand papered smooth, as per detailed & directed by EIC. Four Paise

Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of primer at

Ceiling painting (Two coats) with plastic emulsion paint of approved brand and

One Hundred

manufacture on undecorated Ceiling surface to give an even shade including

Twenty Eight

71 thoroughly brushing the surface free from mortar droppings and other foreign Smt 644.60 128.97

Rupees Ninety

matter and sand papered smooth, as per detailed & directed by EIC. Six Paise

Painting two coats (including priming coat) on new steel and other metal surface

One Hundred

with enamel paint, brushing, interior to give an even shade including cleaning the

Twenty Eight

72 surface an even shade including cleanicn the surface of all dirt, dust and other Smt 200.30 128.95

Rupees Ninety

foreign matter. Four Paise

Providing and fixing roof panel shall be made out of 0.5 mm thick pre coated GI

sheet . The Precoated sheet shall be of minimum 240 mpa steel grade confirming

to IS 14246:1995 and shall have zinc coating of minimum 120 gsm as per

IS:277:1992 , 5-7 microns epoxy primer on both side of the sheet and polyester Eight Hundred

top coat 15-18 micron. The PPGI Sheet shall have plastic protective guard film of Sixty Seven

minimum 25 microns to avoid scratches during transportation. The ridge shall be Rupees Thirty

fixed to the steel members by pop rivet or self drilling/self stitching fastners @ Eight Paise

maximum 450 mm c/c along length of capping/flashing etc complete .

Providing, fabricating and fixing STAINLESS STEEL RAILING OF AISI-304 grade using

50mm dia Stainless Steel pipe of 16 gauge, 3 nos. 16mm dia SS pipe of 16 gauge,

round balustrade of 32mm [50mm 16G Grade 304 with glossy finish consisting of

32 NB or nearest size vertical posts 900 Height at maximum spacing 900c/c with

suitable cups at bottom and top rail of 50 NB or nearest size & intermediate rails

of 16 NB or nearest size etc complete] with complete assembly of SS studs to

house the horizontal 16mm pipes and top handrail, bend and coupler to be used

Three Thousand

as per architectural detail drawings for the railing in parapet, stair etc. including Six Hundred

74 fabricating, hoisting, fixing in position with angle cleats, holdfast etc. in RCC or Rmt 51.80 3,646.91

Forty Six Rupees

masonry in true line level and plumb, including complete assembly, including matt Ninety Paise

polishing and buffing complete, including scaffolding etc. complete as directed by

EIC.(Actual length of stair railing shall be measured at site & same shall be paid.

No wastage should be measured or paid.)

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Providing, fabricating and fixing STAINLESS STEEL HAND RAIL OF AISI-304 grade

using 50mm dia Stainless Steel pipe of 16 gauge, [top rail of 50 NB or nearest size

complete] with complete assembly, bend and coupler to be used as per

architectural detail drawings for the railing in parapet, stair etc. including

One Thousand

fabricating, hoisting, fixing in position with angle cleats, holdfast etc. in RCC or

Three Hundred

75 masonry in true line level and plumb, including complete assembly, including matt Rmt 38.30 1,356.18

Fifty Six Rupees

polishing and buffing complete, including scaffolding etc. complete as directed by Seventeen Paise

EIC.(Actual length of stair railing shall be measured at site & same shall be paid.

No wastage should be measured or paid.)

Providing and fixing retro Reflective Hi Intensity Micro Prismatic Grade Board

using 2mm Aluminum / 4mm ACP, angle iron 75 x 75 x 6mm. Descaling and

degreasing the board as per requirement using epoxy reflactive process by screen

painting as directed etc. complete including transporting and fixing in C.C. 1:2:4

Seven Thousand

with necessary excavation curing etc. complete as per I.R.C. 67-2012 design. A

Six Hundred Ten

76 warranty for 7 years for the Retro reflective sheeting from original manufacturer Smt. 4.50 7,610.66

Rupees Sixty Six

& a certified copy of 3 year outdoor exposure test report from third party test lab Paise

for the product offered shall be submitted by contractor. (B)Class B Type-

4(MDR/ODR) retro reflective sheeting

Water proofing-Providing and applying primer + 2 coats of Single component,

high solids, cold applied liquid polyurethane elastomer waterproof membrane

over uniform surface of slab. Apply 2 coats at dosage of 1.5 kgs per sq.m to

achieve the required minimum DFT of 1.5mm. It should have following

properties :-

1. Total Solids % 95 ± 5%

Nine Hundred

2. Specific Gravity 1.30 ±

Seventy Nine

77 3. Elongation % ≥ 700% Smt 296.30 979.14

Rupees Fourteen

4. Dosage 1.2 - 1.5 kg/m2 in two coats Paise

5. Tack Free Time 24 - 48 hrs

6. Tensile Strength N/mm² ≥

7. Low Temperature Crack Bridging No crack

8. DFT 1.2 - 1.5 mm on smooth, non- absorbent surface

9. Shore Hardness 40 ±

10. Conformance Conforms to ASTM C

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block

60mm thick with grade of concrete M300 pnumatic compressed / vibrated

Seven Hundred

mechanically and as per approved design Confirming to IS 15658 : 2006 including

78 Smt 844.33 706.93 Six Rupees

35 mm Sand layer for levelling and filling the joint with sand in proper line and Ninety Two Paise

level as per guidlines of IRC SP 63-2018 etc. Complete

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete

block 30cm length, 30cm height and 15cm thick of M200 grade concret as per Four Hundred

79 approved design and including excavation for fixing in proper line and level, filling Rmt 100.00 402.55 Two Rupees Fifty

the joint with C:M 1:3 (1 cement:3 fine sand) etc complete. Four Paise

CEMENT CONCRETE ROAD WITH EXPANSTION JOINTS.: M20 Cement Concrete laid

in required slope at concrete floor as directed and specified using necessary steel

form work with M.S. Channels including forming construction & contraction joints

4 mm to 6mm wide by cutting the floor up to ¼ th depth of thickness of the

concrete depth using mechanical saw and sealing the joint with poly sulphide

sealant up to full depth of cutting including providing & fixing M.S. dowels bars

Seven Thousand

with bitumen painted of full length as shown in drawing as to form the bays not Three Hundred

80 exceeding 6.0 m X 4.5 m etc. complete as per directed by Architect or Engineer-In- Cmt 7.50 7,346.39

Forty Six Rupees

Charge. For all level and leads.(a) For RCC Road Note: Rates are Incl. cost of Thirty Eight Paise

Cement Concrete Pavement shall be 150mm. Thk. or as detailed and rolling

times as per mentioned above and also all tools tolerance, shuttering, channel,

etc. complete as per detailed & Directed by Architect & EIC.

Providing & Laying & jointing in true line level 110mm dia U.P.V.C. SWR type B

pipe confirming to IS 13592-1992 with one end plain & other end socket with

rubbering & Fixing conforming to ISI 14735-1999 of approved make for drain

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe

Eight Hundred

shall be fixed on wall using PVC clamps of the size 160mm dia x 210mm length x

Seventy Six

81 196mm high at every 2000mm centre to centre or shall be concealed in wall as Rmt. 57.50 876.90

Rupees Ninety

directed necessary fittings such as bends, shoes, etc. incl. testing of pipe & joint & Paise

jointed with adhesive solvent, cement incl. cost of all material etc. complete as

per detailed, directed & approved by the consultant / EIC.

Monobloc pump 3 phase 400/440 volt, 50 Hz AC Supply & 2800 RPM as per IS Twenty Four

Thousand Two

82 9079 at departmental stores with following MOC: Casing: CI-FG260, Impeller: Nos 1.00 24,240.00

Bronze & Shaft: SS:410, 7.5Hp 24 m head Hundred Forty

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Control panel- DOL / Star Delta starter suitable for local & remote pump control

Six Thousand

application consisting of MPCB, overload relay and contactors as per Type II Nine Hundred

run hour meter, required protective relays & control accessories. Rupees Twenty

Four Paise

Providing laying and jointing in true line and level 75mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall

Two Hundred

be fixed on the wall with the help of clamp at every two metre C/C or shall be

Eighty Rupees

84 concealed as directed including necessary fittings etc. including testing of pipe Rmt. 90.00 280.23

Twenty Three

and joints and fixing the same with adhesive solvent, including cost of all Paise

materials.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at every two metre C/C or shall be Seventy Two

85 concealed as directed including necessary fittings etc. including testing of pipe Rmt. 37.50 72.65 Rupees Sixty

and joints and fixing the same with adhesive solvent, including cost of all Four Paise

materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at every two metre C/C or shall be Ninety One

86 concealed as directed including necessary fittings etc. including testing of pipe Rmt. 41.00 91.84 Rupees Eighty

and joints and fixing the same with adhesive solvent, including cost of all Three Paise

materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall

One Hundred

be fixed on the wall with the help of clamp at every two metre C/C or shall be

Forty Eight

87 concealed as directed including necessary fittings etc. including testing of pipe Rmt. 56.00 148.12

Rupees Eleven

and joints and fixing the same with adhesive solvent, including cost of all Paise

materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall

One Hundred

be fixed on the wall with the help of clamp at every two metre C/C or shall be

Ninety Five

88 concealed as directed including necessary fittings etc. including testing of pipe Rmt. 61.00 195.67

Rupees Sixty Six

and joints and fixing the same with adhesive solvent, including cost of all Paise

materials.

Providing & Fixing gun metal check or no return full way wheel valve etc.

Four Hundred

89 complete as per the instruction of EIC. (C) 25 mm. Dia Each 10.00 420.63 Twenty Rupees

Sixty Three Paise

Providing & Fixing gun metal check or no return full way wheel valve etc. Six Hundred

Sixty Three

90 complete as per the instruction of EIC. (E) 40 mm. Dia Each 10.00 663.43

Rupees Forty

Providing and fixing screw down bib taps of following size.(A) Brass screw down

Two Hundred

91 bib tap polished bright. (i) 15mm dia. Each 8.00 214.81 Fourteen Rupees

Eighty Paise

Providing and fixing brass screw down stop tap.(B) 20mm dia. Two Hundred

Twenty Three

Rupees Eighty

Providing erecting and fixing double coated ISI water tank of required capacity Three Rupees

93 each with all necessary fittings and connection etc. complete on terrace Liter 8000.00 3.95 Ninety Four

Providing & Fixing PVC SWR Nahni trap IS 14735 for drain- 100mm diameter with

150 mm X 150mm S.S.jali for floor or nahni trap of the following nominal Five Hundred

diameter of self cleansing design with C.I screed down or hinged grating including Eighty Six Rupees

the cost of cutting & making good the walls, as per detailed, directed & approved Twenty Seven

by the EIC. Paise

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and One Thousand

water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard Two Hundred

95 weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. Each 8.00 1,292.19 Ninety Two

Rupees Nineteen

Constructing brick masonry chamber for underground C.I. Inspection chamber &

bends with bricks having crushing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm internal dimensions, total weight

of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) & Wt. of frame

Two Thousand

15Kg. ) (R.C.C. top slab with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

Nine Hundred

96 aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with Each 6.00 2,932.93 Thirty Two

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls Rupees Ninety

& bed concrete for (i) Inside dimensions 455mmx 610mm & 450mm deep for Two Paise

single pipe line. etc. complete as per detailed, directed & approved by the

consultant / EIC.

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Constructing brick masonry manhole with R.c.c. top slab in 1:2:4 mix ( 1 cement :

2 coarse sand :4 grade stone aggregate 20mm size ) foundation concrete 1:3:6

mix ( 1 cement : 3 coarse sand :6 brick bats 40 mm size ) inside plaster 15mm

thick with CM 1:5 ( 1 cement : 5 Coarse sand ) finished with a floating coat of neat

cement & making channels in cement 1:2:4 mix ( 1 cement : 2 coarse sand :4

stone aggregate 20mm nominal size ) finished smooth complete including curing

Thousand Three

97 & testing… ( I ) inside 900mm x 1200 mm & 1.5 m deep including R.c.c. cover with Each 6.00 19,349.63 Hundred Forty

frame size 560 mm diameter ( A ) with 230mm thick walls of brick masonry using Nine Rupees

brick having crushing strength not less then 35 kg/sqcm in CM 1 : 5 ( 1 cement : 5 Sixty Three Paise

coarse sand ), (2) B type depth 1.50 Meter for 150mm diameter sewer.. etc.

complete as per detailed, directed & approved by the consultant / EIC.

Providing Septic Tank of 5.00 mt x 3.00 mt x2.00 mt size for Sewerage including

One Hundred

excavation with any strata up to four meter depth,PCC in Bottom Slab 1:3:6,Brick Thirty Six

Work in cement mortar 1:5, RCC M250 Slab on Top And bottom, required filling Thousand Two

98 for Tank including making Required line for water inlet, precast RCC M.200 Frame Each 1.00 136,221.73 Hundred Twenty

& cover etc.as directed by engineer in charge. etc complete, septic tank as per One Rupees

detailed drawing. Seventy Three

Providing & Laying & jointing in true line level U.P.V.C. SWR type B pipe

confirming to IS 13592-1992 with one end plain & other end socket with

rubbering & Fixing conforming to ISI 14735-1999 of approved make for drain

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using PVC clamps of the size 160mm dia x 210mm length x Eight Hundred

Thirty Four

99 196mm high at every 2000mm centre to centre or shall be concealed in wall as Rmt. 126.00 834.38

directed necessary fittings such as bends, shoes, etc. incl. testing of pipe & joint & Rupees Thirty

jointed with adhesive solvent, cement incl. cost of all material etc. complete as Eight Paise

per detailed, directed & approved by the consultant / EIC. (A) 160mm dia. etc.

complete as per detailed, directed & approved by the consultant / EIC.

Providing laying (to level or slopes) and jointing reinforced concrete Light duty

Four Hundred

non-pressure pipes I.S. class NP2 of the following internal diameter with collars Thirty Four

100 and butt ends prepared for collar joints including testing of joints complete.(D) Rmt. 40.00 434.28

Rupees Twenty

300mm Seven Paise

Providing sock pit of 2.5 Mtr. Internal dia. and 5 mtr Depth internal clear

dimention including the cost of excavation, P.C.C. 1:4:8 and filling brickbats with Thirty Five

dry masonry work, Honeycomb masonary work, M:20 RCC. SLab incl. form work Thousand One

101 including FE-500 Reinforcemnt, M.S.cover, C.I. Pipe & cowl vent, vatas in C.M. 1:3 Each 1.00 35,135.88 Hundred Thirty

with finishing curing etc. complete as directed.. etc. complete as per detailed, Five Rupees

directed & approved by the consultant / EIC. Eighty Eight Paise

Providing & Fixing white colour, Vitreous china, under / Over Counter wash basin

with single hole for pillar type with Cl or MS brackets painted white including

cutting holes, ranking bolts for Fixing & marking good the same, including Fixing

C.P. Brass waste coupling 32mm dia & Bottal trap & 15mm dia pillar tap, Bottle

Two Thousand

Trap, as approved, capstan head C.P. screwed down high pressure with screw

Nine Hundred

102 shank & back nuts & rubber plugs, 15mm dia brass stop cock (50/75mm p.v.c. Each 4.00 2,942.94 Forty Two

Drain connection pipe, Water Connection Pipe of required Size, & testing the Rupees Ninety

same for leak proof, etc. with all material & labours to complete this job in all Three Paise

respected manners, etc. complete as per detailed & approved by the consultant &

directed by EIC.

Providing and fixing wash down water closet (European type,Wall hung W.C. Pan)

with integral P or S trap including jointing the trap with soil pipe in Cement

Mortar 1:1 (1 - Cement : 1 - Fine Sand) with plastic seat and cover for wash down

Seven Thousand

water closer with C.P. brass hinges, C.P. brass toilet paper holder, Jet Spray,

103 Each 4.00 7,001.62 One Rupees Sixty

Metropole flush valve Incl. Connection and rubber buffers. (A) Vitreous China., Two Paise

etc. complete as per detailed & approved by the consultant & directed by EIC.

Providing and fixing water closet squatting Pan including trap and foot rest (Indian One Thousand

type W.C. Pan) size 580mm (Earthwork, bed concrete to be measured and paid Four Hundred

104 for separately) (A) Vitreous China.(I) Long pattern = White colour Each 1.00 1,436.33 Thirty Six Rupees

Thirty Three

Providing and fixing Urinal or approved quality including conecting the Urinal with One Thousand

waste pipe , tap etc. complete.(A) White earthenware flat back or corner type Seventy Four

size 430mm x 260mm x 350mm. Rupees Eighty Six

Providing & Fixing C.P. brass towel rail Approved Make complete with C.P. Brass

brackets fixed to wooden plugs with C.P. Brass screws,, etc. complete as per

detailed, directed & approved by the consultant / EIC. (B) 600mm x 20 mm size, Six Hundred

106 etc. with all material & labours to complete this job in all respected manners, etc. Each 5.00 616.42 Sixteen Rupees

complete as per detailed & approved by the consultant & directed by EIC. Forty Two Paise

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Providing & Fixing 600mm x 450mm beveled edge mirror of superior glass

mounted on 6mm thick A.C. sheet or plywood sheet & Fixing to wooden plugs

Eight Hundred

with C.P. brass screws & washers, etc. with all material & labours to complete this

107 Each 5.00 859.41 Fifty Nine Rupees

job in all respected manners, etc. complete as per detailed & approved by the Forty Paise

consultant & directed by EIC.

Providing & Fixing handicap toilet set with Wall-mounted European Closet & wash

basin & all handicap requirement with dual flush tank, seat & lead (heavy duty)

including C.I. Brackets, C.P. brass hinges, M.S. / C.I. painted brackets, Waste

Coupling, 32mm size bottle trap etc. all Internal fittings complete with grab rails,

swin type grab bar etc. rubber buffers, C.P nuts, bolts etc making holes in walls & Forty Thousand

floors, & finishing for ready to use. The rate includes all necessary connection Four Hundred

108 charges as per product detail to the satisfaction of Architect / engr. in-charge Each 1.00 40,425.96 Twenty Five

where required & the final handing over etc. complete as per specifications, Rupees Ninety

drawings & as directed by the Engineer-in-charge. The scope includes Providing Five Paise

and fixing all the necessary fittings of approved brand and as per directed by

Architect/EIC.

Providing & Fixing pillar tap, screw down high pressure with screws, shanks &

Three Hundred

back nuts. (i) 15mm dia. Eight Rupees

Seventy Two

Providing & Fixing brass screw down stop tap. (A) 15mm dia.

Two Hundred

110 Each 6.00 205.83 Five Rupees

Eighty Two Paise

Providing and fixing Kitchen / Laboratary sink with C.I. or M.S. brackets, painted

Two Thousand

white including cutting holes in walls and making good the same but excluding Three Hundred

111 fittings. Each 0.00 2,326.66 Twenty Six

Rupees Sixty Five

Providing and Fixing Pipe Hanger on Ceilling for Dutile type Ceilling Piping Work as

Seven Hundred

112 Per Directed By Engineer In Charge Each 10.00 707.00

Seven Rupees

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing

One Thousand

drain pipe etc. and repairing the hole after insertion of drain pipe etc. with

One Hundred

113 cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 Each 20.00 1,161.50

Sixty One Rupees

mm nominal size), including finishing complete so as to make it leak proof. Fifty Paise

Point wiring in Copper (Modular) Point wiring for Light / Bell with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be erected

concealed in/ on surface on wall/ceiling complete with 6A Modular type switch /

bell push & accessories and earth continuity of following type, erected on PVC / Four Hundred

Eighty Five

114 Metallic box, single mounting base frame covered with textured/metallic front Pt. 53.00 485.81

plate modules erected on / in wall / ceiling as per pipe erected, with necessary Rupees Eighty

Lamp holder/ceiling rose / H.D.Connector as directed. One Paise

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of

sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected concealed in /

flushed on wall/ceiling, complete with earth continuity and necessary connection

with primary light with accessories erected on Metal / PVC box covered with

One Hundred

mm thick PC(Polycarbonet) / Acrylic sheet for open / concealed wiring. with

Sixty Seven

115 necessary Lamp holder / ceiling rose / H.D.Connector as directed. Pt. 78.00 167.66

Rupees Sixty Six

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Paise

Secondary Point. (f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in / flushed on wall/ceiling

complete with 6A Modular type switch and hum free EME four or more step type

electronic fan regulator with separately mounted and accessories with earth Six Hundred

Seventy Four

116 continuity of following type erected on PVC / Metallic box, single mounting base Pt. 33.00 674.68

frame covered with textured/metallic front plate modules erected on / in wall / Rupees Sixty

ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as Eight Paise

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat-III

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in

following type of to be erected concealed in / on surface of wall / ceiling

complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box

Five Hundred

covered with appropriate front plate modules erected on / in wall / ceiling as per

117 Pt. 40.00 510.05 Ten Rupees Five

pipe erected with following type of accessories. Paise

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in

following type of to be erected concealed in / on surface of wall / ceiling

complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box Seven Hundred

covered with appropriate front plate modules erected on / in wall / ceiling as per Forty Five

pipe erected with following type of accessories. Rupees Thirty

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire Eight Paise

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete (FRLS) CAT III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in

following type of to be erected concealed in / on surface of wall / ceiling

complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box

Nine Hundred

covered with appropriate front plate modules erected on / in wall / ceiling as per

119 Pt. 6.00 915.06 Fifteen Rupees

pipe erected with following type of accessories. Six Paise

[III] For 16A Plug with 2-4 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete (FRLS) CAT III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected

on PVC / Metallic box, single mounting base frame covered with textured / Two Hundred

metallic front plate modules erected on / in wall / ceiling with following type Fifty Seven

accessories. Rupees Fifty Five

Single mounting base-frame & Textured / Metallic front plates. Cat-III Paise

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected concealed in /

flushed on wall/ceiling ,complete with 6A Modular type switches and following

Six Hundred

type of accessories erected on PVC / Metallic box, single mounting base frame

Three Rupees

121 covered with textured / metallic front plate modules erected on / in wall / ceiling Pt. 6.00 603.98

Ninety Eight

as per pipe erected. with necessary batten/angle holder or ceiling rose or Paise

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat-III

Providing following type of Modular Type Accessories mounted with pvc /

metallic box, single mounting base frame covered with textured / metallic front Twenty Five

122 plate , modules erected with necessary connection. As desired by Engineer In Ea. 20.00 25.25 Rupees Twenty

charge Five Paise

(7) Blank Plate Single Cat-III

Decorative call bell Ting-tong box type 250 volts complete erected

Seventy One

123 Ea. 1.00 71.71 Rupees Seventy

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

One Hundred

metallic/white front plate , modules erected with necessary connections as per

124 Ea. 11.00 160.59 Sixty Rupees

site situation directed by Engineer In charge. Fifty Nine Paise

(8) Computer RJ-45 socket cat - III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings Thirty Three

125 & Junction boxes fixed with adhesive solution & Clamps with following dia of Mtr. 500.00 33.33 Rupees Thirty

pipes, in approved manner as directed b) 25 mm Three Paise

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings Sixty Seven

126 & Junction boxes fixed with adhesive solution & Clamps with following dia of Mtr. 40.00 67.67 Rupees Sixty

pipes, in approved manner as directed d) 40 mm Seven Paise

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

Twenty One

127 coupling, PVC bushes, Check-nuts etc. complete of following sizes. (2) 25 mm Mtr. 200.00 21.21 Rupees Twenty

(A) Supplying and laying UPVC cable trunking system comprising unplasticised

Two Hundred

polyvinyl, chloride rigid material with ignition free & flame proof confirming BS Seventy Seven

128 .All necessary accessories and measuring of following sizes. (1) 75 mm x 50 mm Mtr. 70.00 277.75

Rupees Seventy

trunking Five Paise

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

(A) Supplying and laying UPVC cable trunking system comprising unplasticised One Hundred

polyvinyl, chloride rigid material with ignition free & flame proof confirming BS Eighty Eight

.All necessary accessories and measuring of following sizes. (3) 50 mm x 50 mm Rupees Eighty

trunking Seven Paise

Mains & Wires

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire Sixty Two Rupees

of green colour for earth continuity of following size (general wiring + in street Sixty Two Paise

(a) with medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire Eighty Two

131 of green colour for earth continuity of following size (general wiring + in street Mtr. 1200.00 82.82 Rupees Eighty

light) Two Paise

(a) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm (FRLS)

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling with

One Hundred

2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour

132 Mtr. 250.00 112.11 Twelve Rupees

for earth continuity of following size (FRLS) (a) with medium class Rigid PVC pipe Eleven Paise

and accessories (a) 2 wire 4 sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Two Hundred

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

Eighty Four

133 existing trench / pipe of following size of cables Mtr. 10.00 284.82

Rupees Eighty

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) Two Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper Two Hundred

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing Eighty Seven

trench / pipe at road crossing or floor of following size of cable. (B) 3 core 4 Sq. Rupees Eighty

mm Five Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Three Hundred

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in Sixty Four

existing trench / pipe at road crossing or floor of following size of cables. (B) 4 Rupees Sixty One

core 4 Sq. mm Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid

Five Hundred

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

136 Mtr. 300.00 510.05 Ten Rupees Five

existing trench / pipe at road crossing or floor of following size of cables. (C) 4 Paise

core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Six Hundred

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in Seventy Six

existing trench / pipe at road crossing or floor of following size of cables. (A) 4 Rupees Seventy

core 10 Sq. mm Paise

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade

Forty Six Rupees

138 ISI marked copper wires of following size to be erected as directed.(e) 1.50 Mtr. 250.00 46.46

Forty Six Paise

Sq.mm 3 core round PVC sheathed

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for

Thirty Three

PVC insulated armoured cable complete with out going tails, insulating tape etc

139 Ea. 8.00 33.33 Rupees Thirty

for following size of cables. Three Paise

(A) 2 to 4 core 2.5 / 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for

Thirty Eight

PVC insulated armoured cable complete with out going tails, insulating tape etc

140 Ea. 6.00 38.38 Rupees Thirty

for following size of cables. Eight Paise

(B) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for

Thirty Eight

PVC insulated armoured cable complete with out going tails, insulating tape etc

141 Ea. 4.00 38.38 Rupees Thirty

for following size of cables. Eight Paise

(C) 2 to 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable

Seventy Five

gland with rubber ring for PVC insulated armoured cable complete with out going

142 Ea. 2.00 75.75 Rupees Seventy

tails, insulating tape etc for following size of cables. (B) 3 & 1/2 core 35/50 Sq. Five Paise

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

Fifteen Rupees

143 terminals with brass/cadmium plated nut bolts in an approved manner. (C) 16/25 Ea. 2.00 15.15

Fifteen Paise

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

Twenty Rupees

144 terminals with brass/cadmium plated nut bolts in an approved manner. (D) 35/50 Ea. 6.00 20.20

Twenty Paise

Solder less crimping type Copper lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear Eight Rupees

terminals with brass/cadmium plated nut bolts in an approved manner. (A) Eight Paise

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Solder less crimping type Copper lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear Ten Rupees Ten

terminals with brass/cadmium plated nut bolts in an approved manner. (B) 10 Paise

Making trench in soft soil of suitable width of 90 cms deep for laying cable or

Fifty Five Rupees

147 locating the fault all over the run and backfilling the same and making the surface Mtr. 200.00 55.55

Fifty Five Paise

as normal ground.

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of

same material at required depth for laying of cable. below ground / road

Sixty Two Rupees

148 surface for enclosing cable and back filling the same to make ground as per Mtr. 160.00 62.62

Sixty Two Paise

original. (A)50 mm dia

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of

same material at required depth for laying of cable. below ground / road Ninety Five

149 surface for enclosing cable and back filling the same to make ground as per Mtr. 180.00 95.95 Rupees Ninety

original. (C)90 mm dia Five Paise

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to Six Thousand

25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. One Hundred

150 supply 50 c/s. with all internal connections, spreader tinned copper & complete Ea. 1.00 6,173.12 Seventy Three

erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III Rupees Twelve

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

One Hundred

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected

151 Ea. 93.00 112.11 Twelve Rupees

in existing box. confirming to IS 8828/1996 with ISI Mark - Cat III Eleven Paise

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) Six Hundred

Sixty Eight

152 having 10KA breaking capacity & confirms to IS :8828 in existing box having Ea. 4.00 668.62

following capacity (b)40 Amp. Cat.III Rupees Sixty Two

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) Five Hundred

having 10KA breaking capacity & confirms to IS :8828 in existing box having Eighty Seven

following capacity (a) 6 to 32 Amp. Cat.III Rupees Eighty

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) Six Hundred

having 10KA breaking capacity & confirms to IS :8828 in existing box having Forty Seven

following capacity (b)40 Amp. Cat.III Rupees Forty

Providing and erecting Sheet Steel powder coated MCB distribution board - flush

/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

One Thousand

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

One Hundred

155 nos. of MCBs.(The DBs should be used of same company of MCB to be used) Ea. 2.00 1,152.41

Fifty Two Rupees

suitable for (A) single phase incoming and horizontal single phase outgoing (b) Forty One Paise

sheet steel double door (IP-43) (iii)8 way

Providing and erecting Sheet Steel powder coated MCB distribution board - flush

/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate Two Thousand

nos. of MCBs.(The DBs should be used of same company of MCB to be used) Nine Hundred

suitable for (B) three phase incoming and single phase horizontal type outgoing Thirteen Rupees

Per phase isolation type (PPI) (b) sheet steel double door (ii)6 way Eighty Five Paise

Providing and erecting Sheet Steel powder coated Vertical MCB distribution

board (VTPN) - flush / surface mounted double door (IP54) fitted with insulated

copper busbar, isolated neutral link, earth bar and DIN rail, confirming to IS

Thousand Six

and BS 5486-1986,IP-54 suitable for 63/100 AMP TPN MCCB + RCCB as incomer

157 Ea. 1.00 18,663.60 Hundred Sixty

and three phase outgoing as per following .(The DBs should be used of same Three Rupees

company of MCB to be used) Fifty Nine Paise

(D)12 way outgoing

providing and erecting Approved make RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for One Thousand

operation on single phase 240 V,50Hz. having characteristic of quick action & Nine Hundred

158 tripping with all advance feature & do not incorporate any electronic component. Ea. 10.00 1,969.50 Sixty Nine

for following Max. rating erected as directed (i) 25 Amps.DP Cat. III Rupees Fifty

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Supplying & erecting approved make IP 55 grade Company fabricated Timer Panel

of following capacity for switch On-Off street lights on time scheduling basis

made from 16G CRCA sheet duly epoxy power painted inside and outside with

Thousand Three

hinged doors and locking arrangement consisting of suitable size of 4 Pole MCB

Hundred Ninety

159 and 4 pole contactor (cat-III)with analog time switch, auto manual switch of same Ea. 1.00 12,399.77

Nine Rupees

make and suitable input and output Bakelite terminals and with door earthing Seventy Seven

approved by Engineer in charge.(A) 32 Amp Paise

providing and erecting Approved make RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for Two Thousand

operation on single phase 240 V,50Hz. having characteristic of quick action & Two Hundred

160 tripping with all advance feature & do not incorporate any electronic component. Ea. 6.00 2,235.13 Thirty Five

for following Max. rating erected as directed (ii) 40Amps. DP Cat. III Rupees Thirteen

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K, Two Hundred

Ninety Five

161 Luminaire efficacy> 85 lumens/watt ,LED Nos. 10.00 295.93

LED driver efficiency > 85 % Rupees Ninety

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have Three Paise

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

2KV,IP-20, conventional 4 feet Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Two Hundred

162 Luminaire efficacy> 85 lumens/watt , Nos. 11.00 220.18 Twenty Rupees

LED driver efficiency > 85 % Eighteen Paise

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

Surface/Recessed Mount Downlight with provision for spring loaded mounting

clips complete.IP20 (i) 9 watts,Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Four Hundred

Luminaire efficacy> 85 lumens/watt , Twenty Seven

163 LED driver efficiency > 85 % Nos. 29.00 427.23

Rupees Twenty

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have Three Paise

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

Surface/Recessed Mount Downlight with provision for spring loaded mounting

clips complete.IP20 (ii) 11 watts, Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Seven Hundred

Luminaire efficacy> 85 lumens/watt , Fifty Eight

164 LED driver efficiency > 85 % Nos. 87.00 758.51

Rupees Fifty One

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have Paise

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

Surface/Recessed Mount Downlight with provision for spring loaded mounting

clips complete.IP20 (iv) 24 watts, Surge-2 KV Cat-lll

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure die cast aluminium housing

with smooth finish powder coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

Two Thousand

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver Two Hundred

165 efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below Nos. 10.00 2,201.80

One Rupees

description have shown ranges of Wattage capacity of LED fittings.The Engineer Eighty Paise

Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection. (iii) 36 watts Cat-lll

Providing and erecting PVC body surface or pendent mounting LED Bulk type

Seven Hundred

watt Lighting Fitting with electronic driver. And lumen output from luminaire

Eighty Seven

166 720lm , input voltage range 90-300VAC , 50Hz cool white(3000 to 6500k), inbuilt Nos. 5.00 787.80

Rupees Eighty

driver, -20degC to +60degC working temperature, AL frame with Beam Angle Paise

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm O.D 4 mtr.

Three Thousand

Long duly painted with two coats of aluminium paint complete with metallic base Two Hundred

167 plate of 300 mm x 300 mm x 4mm thick for using as a compound light pole with Nos. 10.00 3,225.94 Twenty Five

approx. weight 32 Kg. Rupees Ninety

Four Paise

Providing and erecting street light pole bracket comprising main B Class MS pipe

of 4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing

of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top

having sufficient fasteners for fixing the brackets and having spread of 1 mtr.

Five Hundred

length with suitable rise as per site condition & suitable welded stiffener reducer

168 Nos. 10.00 561.56 Sixty One Rupees

and nipple with check nut complete painted with one coat of Red oxide / PU base Fifty Six Paise

primer and two coats of Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm bracket 1 Mtr

Providing & erecting approved make street light / wall mounting junction box

compression moulded from SMC (thermoset plastic) vertical sliding cover having

Six Hundred

locking with square head stud loop in / loop out in built terminal suitable for four

169 Nos. 10.00 616.10 Sixteen Rupees

core cable, waterproof of I.P. 54 protected with clamp or bolt nut & earth bolt of Ten Paise

following size. (B) 250mm x 194mm x 99 mm

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including

excavation for the pole of size 45 x 45 x 100 cm. Deep in below ground level with Eight Hundred

170 plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper ground level with Nos. 10.00 809.01 Nine Rupees and

necessary curing and finishing in approved manner. ( for 4 & 6 mtr pole) One Cent

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep

complete having 3blades with aluminium blades with , canopy & 30 cm. down

Two Thousand

rod erected with earthing.(Make shall be approved by Engineer in charge)

171 Nos. 33.00 2,056.36 Fifty Six Rupees

including Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Thirty Six Paise

Pipe down rod erected duly painted for fan complete with proper insulation

without leakage and earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC

One Hundred

bars up to 50mm length each side and pierced through a 16 Gauge M.S. box /

172 Nos. 33.00 108.07 Eight Rupees

Heavy Duty PVC box complete erected concealed in Ceiling with necessary Seven Paise

finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.

Eighteen Rupees

Eighteen Paise

Supplying & erecting approved make low noise decorative exhaust fan having

square frame ABS body with inbuilt lowers & square frame. 250mm with 1350 One Thousand

Three Hundred

174 RPM Cat.II Nos. 9.00 1,366.53

Sixty Six Rupees

Fifty Three Paise

Providing and erecting required size HOT dipped Galvanised iron strip for earthing

Seventy Seven

175 of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp. Kg. 100.00 77.77 Rupees Seventy

Seven Paise

Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/

Seven Hundred

Transformer, LT panel board, Motors etc. using copper clamp. Ninety Four

Rupees Eighty

Seven Paise

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.Using for

Seventy Seven

177 DB earthing wire 8 to 16 SWG. Kg. 50.00 77.77 Rupees Seventy

Seven Paise

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved

make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of 14 mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover

(A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in test Certificate) & Seven Thousand

Ninety Five

178 having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- Ea. 2.00 7,095.25

0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load Rupees Twenty

Five Paise

& dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time Necessary test report must be

submitted by Agency. [B] For Electrical installation up to 11 KV located in other

than normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg.

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved

make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of 14 mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover

(A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in test Certificate) &

Ten Thousand

having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- Five Hundred

179 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load Ea. 2.00 10,593.89 Ninety Three

& dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound Rupees Eighty

should be capable to retain moisture for long time Necessary test report must be Nine Paise

submitted by Agency. [C] For Electrical Installation covering Transformer Neutrals,

Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like

Automation, SCADA)i.e. independent Earthing located in other than normal

soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Supplying & erecting approved make LAN cable of following size in existing pipe Forty Seven

180 as per direction. [C] CAT - 6 RMT 1190.00 47.47 Rupees Forty

Seven Paise

Supplying and erecting approved make online Un-interruptible Power Supply

system comprising flat cum-boost charger with IGBT base rectifier & Inverter &

sealed maintenance free SMF batteries. The charger having operating capacity for

Eighty Two

input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power

Thousand Nine

factor with battery, over/under voltage output with over load & short circuit

181 Nos. 1.00 82,941.20 Hundred Forty

protection equipment. The system housed in CRC sheet duly powder coated paint One Rupees

with following power backup.with MS painted batteries stand, 10% Overload Twenty Paise

capacity for momentary load. (C) 3 KVA with 1Hr Backup

Providing and erecting water cooler having storage capacity 80Ltr. & cooling

capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the

Forty Nine

water should drop by 15˚ C within a hour, The water cooler should be comprising

Thousand Five

of hermetically sealed compressor, fan motor, condensing unit, water tank

182 Ea. 1.00 49,559.69 Hundred Fifty

surrounded by evaporating coil, thermostats, relay etc. complete with necessary Nine Rupees

inlet & outlet connection. The body of water cooler will be made from Stainless Sixty Nine Paise

Steel. ◦

Supplying & erecting 5 stage single reverse osmosis water purification system

Twenty Nine

with M.S. powder coated frame, prefilter housing with 'O' ring presediment filter

Thousand One

GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with

Hundred Eighty

183 psi inline type post carbon filter auto low & high pressure switches with following Ea. 1.00 29,187.99

Seven Rupees

size of storage tank & LPH capacity & erected as directed [C] 50 Ltr / Hr with 150 Ninety Nine

psi 2 nos booster pump Paise

Providing Water proof straight Joint in PVC insulated flat flexible copper cable by One Hundred

Eighty Nine

184 using insulating material, water proofing material, & making the joint complete. Ea. 10.00 189.88

(A) Up to 10Sq. mm Rupees Eighty

Eight Paise

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

SITC OF DOME TYPE CAMERA - 4MP IPCP-UNC-DA41L3C-D-Q CPPLUS MAKE AS

PER SPECIFICATIONS : 1/2.9” 4MP PS CMOS Image Sensor (0.8758 centimeters)

Max. 4MP (2688 × 1520)@1-25/30fps/ (2560 × 1440)@1-25/30 Instastream, Four Thousand

H.265, H.264, H.264H, H.264B, MJPEG Support Triple stream WDR (120dB), One Hundred

Day/Night(ICR), 3D NR, AWB, AGC, BLC, HLC, Digital watermarking3.6mm fixed Fifty Six Rupees

Lens Support Built-in Mic IR Range of 30 Mtr., IP67, PoE complete with rj45 Fifteen Paise

connector crimping, PVC back box

SITC OF BULLET TYPE CAMERA - 4MP IPCP-UNC-TC41L5C-VMD-LQ CPPLUS MAKE

AS PER SPECIFICATIONS : 1/2.7" 4MP PS CMOS Image Sensor (0.9407

Centimeters) Max. 4MP (2688 × 1520)@1-25/30fps/ (2560 × 1440)@1-25/30

Instastream, H.265, H.264, H.264H, H.264B, MJPEG Support Triple stream WDR Eight Thousand

(120dB), Day/Night(ICR), 3D NR, AWB, AGC, BLC, HLC, Digital watermarking3.6mm Eighty Rupees

fixed Lens Support Built-in Mic IR Range of 50 Mtr., IP67, PoE complete with rj45

connector crimping, PVC back box

SITC OF 32 CHANNEL NVR - CP-UNR-4K4322-V4 - 2 SATA - CP PLUS MAKE - 32 Ch.

4K Network Video Recorder AS PER SPECIFICATIONS : Up to 32 channel IP camera

input Max. decoding capability: 8 × 1080p@30 fps, 2 × 8 MP@30 fps Smart

Instastream/H.265/H.264 /MJPEG Max. 160/128/60 Mbps Eighteen

incoming/recording/outgoing bandwidth Support 2 SATA HDDs up to 20TB, 2 (1 Thousand One

front USB 2.0 port, 1 rear USB 2.0 port) HDMI / VGA simultaneous video output Hundred Eighty

Support Multi-brand network cameras ONVIF Version 2.4 conformance Mobile Rupees

Software: iCMOB, gCMOB CMS Software: KVMS, KVMS Pro Lite

Supply Installation Testing & Commissioning of 4TB Surveillance Harddisk

Thousand Three

188 Nos 1.00 13,352.20 Hundred Fifty

Two Rupees

Twenty Paise

SITC OF 16PORT POE NETWORK SWITCH - SG1218MPE TPLINK AS PER

SPECIFICATIONS : 16× PoE+ gigabit RJ45 ports, 2× combo gigabit SFP slots.

PoE power budget is up to 250 W, making it ideal for small to medium business

surveillance systems. Port Priority is able to guarantee the quality of sensitive

application like video monitor. PoE Auto Recovery automatically reboots your

Fifteen Thousand

189 dropped or unresponsive PoE-powered devices. Nos 3.00 15,150.00 One Hundred

Intelligent power management protects the switch from overload. QoS ensures Fifty Rupees

smooth traffic for latency sensitive applications. IGMP Snooping optimizes

multimedia traffic delivery, such as IPTV.

SITC of Dual Band Wireless Cable Router, Wi-Fi Speed Up to 867 Mbps/5 GHz +

Three Thousand

190 300 Mbps/2.4 GHz, Supports Parental Control, Guest Wi-Fi, VPN - TP-Link Archer Nos 2.00 3,030.00

Thirty Rupees

C50 AC1200 or equivalent

SITC OF 43" LED monitor / TV - NEXTVIEW MODEL NO. Nv2fh43s9

Twenty Three

Thousand Four

191 Nos 1.00 23,482.50 Hundred Eighty

Two Rupees Fifty

SITC OF 15U NETWORK RACK - Power Strip with necessory sockets, mounting Nine Thousand

Five Hundred

192 trays, exhaust fan complete with accessoreis - 600 X 600MM approx. size -- Elirix Nos 1.00 9,595.00

make Ninety Five

Supplying & erecting Philips / Ahuja / CKS make PA Ceiling speaker input Power:8

Two Thousand

Watt RMS Power Taps:8/4/2W on 100 V Freq.Responce:60-15,000Hz, SPL

Two Hundred

193 (1w/1m):92db,Dim./Wt: ø 227 X H77mm/0.78kg, Model no.CS-6081T Nos 20.00 2,222.00

Twenty Two

Supplying & erecting Philips/ Ahuja / CKS make Amplifier having following

specification:

Power Output :250W (RMS) (300W Max.), inputs : 6 Misc. & 2 Aux., frequency

Twenty Two

Response :50-1500HZ I3db, Tone, Controls :Cut & Boost type, LED Meter : 5 LED

Thousand Seven

194 Arrays, The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with Nos 1.00 22,725.00

Hundred Twenty

automatic changeover from AC to Battery operation, duly protected by wrong Five Rupees

Battery Polarity connections.

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Supplying & erecting Mixing Console having channels, Audio mixer with. Echo

facility for live performance, Auditorium & stadiums, having following features &

facilities. (a)input Channels :- Each channel has separate

6.25mm size balanced phone jack for mike & line for balanced & unbalanced

signals (b)Individual gain control for sating optimum level for minimum noise

(c)BASS, MID & TREBLE ‘ controls Separately for each input channel (d)ECHO

control for each channel (e)PAN control for echo channel for left or right output

(f) AUX Control : To control , level of the channel in final mix to AUX sound output

(g)Channel ON/OFF switch (h)ECHO Section :- ECHO, reverb & Chorus effect can

be added to all input channel by different setting of Delay, Reverb & Level control

(i)Tape section (j)Aux. send & return For sending Pre-feeder output of channel for

monitoring or adding a special effect unit (k)Mono / Stereo output controls (m)

Head phone output for monitoring purpose. Thirty Eight

Technical specification: Thousand Six

195 (a)Power Requirement -AC220-24OV 50 Hz DC 24 Volts (b)MIC Output Nos 2.00 38,632.50 Hundred Thirty

Two Rupees Fifty

Impedance/gain -2 K Ohms/ 62 dB (c)Line Output Balance/42 dB —- 20 K ohms (d)

Impedance / Gain :- 10Kohms unbalance / 42 dB (e)frequency Response - 30 Hz-

20 KHz L / R Line Output ( + 0, -1 dB ) (f)Equalization Bass/ - + / - 12 dB at 100Hz

Mid / Treble 2 KHz / 10 KHz (g) Outputs, Line Output Line Output Low : -10 dB / -2

dBM , Line Output High : 0 dBM / +17 dBM (775 mv / 5.5 V ) (h) S/N ratio Line

Output Level : > 70 dB (0 dB, 0.775V) The Console shall be mounted on standard

The channel of following numbers. (A) 14 Channel Audio Mixer with ECHO

Supplying and erecting Philips / Ahuja / CKS make Weather & Dust resistant sound

column with Aluminium case & Aluminium mesh grille with foam layer under grill,

150-20000 Hz with following specifications (b) With 2 speakers having power

Five Thousand

196 handling capacity of 23W(MAX) & 15 W (RMS), each speaker have impedance of Nos 2.00 5,050.00

Fifty Rupees

respectively 670 ohms/ 15W, 1 K.ohms/

10W, 2K.ohms / 5W & 4 K. ohms / 2.5W

Supplying and erecting Boss/ Philips / Ahuja / CKS make Weather & Dust resistant

ceiling/ wall mounted sound speaker with decorative case & mesh grille with

Seven Thousand

frequency response 150-20000 Hz with following specifications (b) With

Five Hundred

197 speakers having power handling capacity of 23W(MAX) & 15 W (RMS), each Nos 4.00 7,575.00

Seventy Five

speaker have impedance of respectively 670 ohms/ 15W, 1 K.ohms/ 10W, Rupees

2K.ohms / 5W & 4 K. ohms / 2.5W

Gooseneck Condenser Microphone with Base Ahuja Model No. GM-605, GMB-6C

Eleven Thousand

198 or equivalent in Bosch /Shure etc. Nos 1.00 11,110.00 One Hundred

Ten Rupees

SPEAKER WIRE Eighty Five

199 Mtr 500.00 85.85 Rupees Eighty

Five Paise

Providing and erecting Inverter based approved make split air-conditioning unit

consisting of condensing unit with variable speed fan motor, inverter type

hermetically sealed rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with its accessories by

Thousand Three

means of extra supplied proper insulated copper tubing,drain PVC pipes suitable

200 Each 2.00 56,353.96 Hundred Fifty

for ( cost includes Eco Friendly green gas charging and 15A plug top & Remote Three Rupees

Control & MS Stand) with necessary core cutting. (1)For ISEER Range Ninety Six Paise

(KWH/KWH)(3.1 to 3.99) (C) for 1.7 to 2 ton capacity - Premium Cat.

Liaisoning work for additional load for requirement, electrical power connection Fifty Thousand

201 charges and inspector approval for power(to be paid to concern electrical power Lot 1.00 50,500.00 Five Hundred

supplier company) Rupees

Conventional type Smoke detector having following specifications : Dual LED’s for

360 visibility. Advanced detection and communication protocol. Easy installation

and maintenance.

Sleek low -profile housing design.Regular 100mm Base. EN-54 Standard.

Operating Voltage : 10 ~ 28V DC. O O Operating Temperature : 0 C to 37.8 C. One Thousand

One Hundred

202 Relative Humidity : 10% to 90% Nos 18.00 1,146.35

Reset Voltage : less than 1V. Stand by Current : 85 Micro Amps. Start Up Time : 30 Forty Six Rupees

Seconds. Thirty Five Paise

Cycle time : 28 - 35 Seconds. Alarm Current : 60 mA (Max.). Remote Output :

15mA maximum open collector. Smoke Sensitivity : 0.10 to 0.16 dB/m. Thermal

Rating : 57 C(135 F). complete with Junction box RAVEL make cat no. RE326 2SL

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Conventional type Fire Alarm Panel having Following specifications : CE Approved.

16 X 2 Dot Matrix LCD Display. Standby battery backup with built in charging.

Switch Mode Power Supply. Tactile eypad for easy panel operation. System ON

indication. Low Battery visual warning with audible ton. Fire / Fault status in

unambiguous colored LED indication. 2 programmable relays for fire,supervisory

and fault. All zones accept smoke detectors and any normally open contact

device. Any Zone can be configured as alarm or supervisory. Zone wise isolation

and one man walk test facility. Programmable Aux Outputs. Lamp test & Drill test Nine Thousand

Five Hundred

203 facility. 100 All Events log with RTC. Date / Time / Password configuration. Nos 1.00 9,595.00

Programmable auto silence facility. Zone wise sounder / contact optional). TCP-IP Ninety Five

/ GSM facility (optional). 120 / 230VAC + 10% -15%, 60 / 50 Hz, 50W Operating Rupees

Temperature 0 – 49° C / 32 – 120° F. Storage Temperature 0 – 60° C Relative

Humidity 93 ± 2% RH (non-condensing) at 32 ± 2° C / 90 ± 3° F Charging voltage

Charging current 28 V ± 5% 350mA (max) - RAVEL Make cat no. RE-102R

SITC of Hooter / Sounder as per following specifications : Operating Voltage : 24V

DC Operating Current : 40mA Sound Level : 85dB@1m Operating Temperature :

– 49° C / 32-120° F. Sounder Type : Piezo Electric Type Tone Type : Fire Engine Nine Hundred

Siren Material : ABS Plastic Colour : Red Dimensions : 96 H mm X 76 L mm X 28 D Forty Nine

mm Back Box : 95 H mm X 75 L mm X 58 D mm Mounting Type : Surface / Flush Rupees Forty

Mount complete with Back Box - RAVEL make cat no. RE24CS Paise

SITC of Manual Call Point as per following Specifications : Operating Voltage :

24VDC Operating Current : 30mA Colour : Green / Yellow / Red Material : Plastic Eight Hundred

IP Rating : IP-50 Size : 86 X 86 X 50 mm - RAVEL make Cat no. RE716 MR Eight Rupees

Supplying, Installation, Testing and commissioning of Jockey Pump 10.8M3/hour One Hundred

@70M Head.Horizontal Centrifugal End Suction. with M.S.fabricated common Nineteen

base plate, coupling, coupling guard, foundation bolts etc. for motor and details Thousand Forty

pump specificaion follow as per specification as mentioned in tender volume.. One Rupees

Ninety Four

Supplying, installation, testing and commissioning of electric driven Monoblock

Fire pump 960LPM at 70 m head 2900 RPM pump. suitable for automatic

Two Hundred

operation and consisting of following: complete in all respect as required. With

Suitable HP, SQ cage induction motor TEFC type suitable for operation on

207 Set 1.00 252,399.00 Thousand Three

volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot Hundred Ninety

mounted type with class 'F' insulation, conforming to IS: 325. Nine Rupees

Diesel Operated pump 70m head, 2900 RMP with day tank & battery set Five Hundred

complete with 100 ltr diesel Fifty Five

208 SEt 1.00 555,002.07 Thousand Two

Rupees Seven

Control Panel for the operation of Jockey pump, Fire pump Electric and Fire pump Ninety Four

Diesel with automation Thousand Nine

209 SEt 1.00 94,990.50 Hundred Ninety

Rupees Fifty

Providing, fixing, testing & commissioning of Pressure Switches for automation of

Two Thousand

fire pumps. Pressure switches shall be double pole single throw type suitable for

Four Hundred

210 phase supply with diaphragm. Aluminum Enclosure with IP 66 protection follow Nos. 3.00 2,400.47

Rupees Forty Six

as per specification as mentioned in tender volume.. Paise

Supplying, Installation, Testing and commissioning of C.I.Butterfly valve

Ten Thousand

conforming to I.S:13095 class PN 16 rating with Fittings, Flanges, Nutbolts,

Ninety Rupees

211 Washers, Gaskets etc. follow as per specification as mentioned in tender volume.. Nos. 2.00 10,090.94

Ninety Four

of size: 150mm dia. Paise

Supplying, Installation, Testing and commissioning of C.I.Butterfly valve Six Thousand

conforming to I.S:13095 class PN 16 rating with Fittings, Flanges, Nutbolts, One Hundred

212 Washers, Gaskets etc. follow as per specification as mentioned in tender volume.. Nos. 2.00 6,107.98 Seven Rupees

of size: 100mm dia. Ninety Eight

Supplying, Installation, Testing and commissioning of C.I.Ball type Foot valve

conforming to I.S:13095 class PN 16rating with Fittings, Flanges, Nutbolts, Thousand Five

Washers, Gaskets etc. follow as per specification as mentioned in tender volume.. Hundred Thirty

213 of size: 150mm dia. Nos. 2.00 18,533.30

Three Rupees

Twenty Nine

Providing, fixing, testing and commissioning of C.I. Dual plate type Non-Return

Valve class PN 16 rating with fittings, flanges, nutbolts, washers, gaskets etc.of Eleven Thousand

214 sizes: 150mm dia Nos. 2.00 11,041.19

Rupees Nineteen

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Providing, fixing, testing and commissioning of Above Ground MS. ERW Black C

Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto 200 Two Thousand

mm dia. And above) including cutting, screwing, welding etc. and providing all Three Hundred

215 fittings like flanges, bends, tees, elbows, reducers, clamps, hangers etc. with Meter 35.00 2,391.95 Ninety One

painting of one coat of primer and 2 or more coats of synthetic enamel paint of Rupees Ninety

approved make / shade complete as per specification. 150mm dia Four Paise

Providing, fixing, testing and commissioning of Above Ground MS. ERW Black C

Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto 200 One Thousand

mm dia. And above) including cutting, screwing, welding etc. and providing all Seven Hundred

216 fittings like flanges, bends, tees, elbows, reducers, clamps, hangers etc. with Meter 15.00 1,744.20 Forty Four

painting of one coat of primer and 2 or more coats of synthetic enamel paint of Rupees Nineteen

approved make / shade complete as per specification. 100mm dia. Paise

Providing, fixing, testing and commissioning of Under Ground M.S. ERW Black C

Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto 200 Three Thousand

mm dia. And above) with IWL/pypecoat, 4mm thickness wrapping and coating Two Hundred

217 10.00 3,265.73 Sixty Five Rupees

and providing all fittings like flanges, tees, elbow, fasteners with all follow as per Meter

Seventy Three

specification as mentioned in tender volume.. 150mm dia

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with all

fittings (butt welded) such as elbow, socket, tees, unions, flanges with hot deep Three Hundred

galvanized nut & bolt , reducer, clamps & plug etc.with welding,threading,jointing. Sixty Three

218 And Excluding cutting holes in wall Mtr 80.00 363.56

Rupees Fifty Six

/slab and making good of the same. The pipe & fittings shall have One coat of Paise

primer and two coats of fire red / PO red 25 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with all

fittings (butt welded) such as elbow, socket, tees, unions, flanges with hot deep

galvanized nut & bolt , reducer, clamps & plug etc.with welding,threading,jointing. Four Hundred

219 And Excluding cutting holes in wall Mtr 40.00 459.50 Fifty Nine Rupees

Fifty Paise

/slab and making good of the same. The pipe & fittings shall have One coat of

primer and two coats of fire red / PO red 32 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with all

fittings (butt welded) such as elbow, socket, tees, unions, flanges with hot deep Five Hundred

galvanized nut & bolt , reducer, clamps & plug etc.with welding,threading,jointing. Seventy Five

220 And Excluding cutting holes in wall Mtr 25.00 575.64

Rupees Sixty

/slab and making good of the same. The pipe & fittings shall have One coat of Four Paise

primer and two coats of fire red / PO red 40 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with all

fittings (butt welded) such as elbow, socket, tees, unions, flanges with hot deep Seven Hundred

galvanized nut & bolt , reducer, clamps & plug etc.with welding,threading,jointing. Ninety Seven

221 And Excluding cutting holes in wall Mtr 15.00 797.82

Rupees Eighty

/slab and making good of the same. The pipe & fittings shall have One coat of Two Paise

primer and two coats of fire red / PO red 50 mm dia

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with all

fittings (butt welded) such as elbow, socket, tees, unions, flanges with hot deep

Nine Hundred

galvanized nut & bolt , reducer, clamps & plug etc.with welding,threading,jointing.

Forty Nine

222 And Excluding cutting holes in wall Mtr 15.00 949.31

Rupees Thirty

/slab and making good of the same. The pipe & fittings shall have One coat of Paise

primer and two coats of fire red / PO red 65 mm dia

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with all

fittings (butt welded) such as elbow, socket, tees, unions, flanges with hot deep One Thousand

galvanized nut & bolt , reducer, clamps & plug etc.with welding,threading,jointing. Two Hundred

223 And Excluding cutting holes in wall Mtr 30.00 1,201.78 One Rupees

/slab and making good of the same. The pipe & fittings shall have One coat of Seventy Seven

primer and two coats of fire red / PO red 80 mm dia. Paise

Providing fixing testing and commissioning of GUN METAL 15 mm size quartzoid

Three Hundred

bulb type sprinklers, set to operate at 57 degree Centigrade. Pendent type type Ninety Nine

224 with required accessories complete. (GUN METAL) Nos. 85.00 399.96

Rupees Ninety

Supplying , installation, Testing & commsioning of Flexible Drop 1000mm

One Thousand

Five Hundred

Fourteen Rupees

Eighty Four Paise

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Providing, fixing, testing and commissioning of RRL Fire delivery hose 63 mm Dia Six Thousand

in 15 mtrs length with ISI MARKS is 636 type ‘A’ Fitted with Stainless Steel male & Five Hundred

226 female coupling ISI Mark IS :903 duly binned with copper wire winding follow as Nos. 4.00 6,502.28 Two Rupees

per specification as mentioned in tender volume.. Twenty Seven

Supply installation ,Testing & commissioning of single headed oblique pattern ISI

hydrant landing valve with 80 mm dia flanged inlet & 63 mm dia instantaneous Seven Thousand

type female outlet complete with PVC cap and chain, twist release type lugs Six Hundred Fifty

WITH all accessories as per SI Standard Conforming to IS-5290. (SS 304- Body SS- Rupees Seventy

304 Coupling) Five Paise

Providing, fixing, testing and commissioning of weatherproof standard fire Hose

Six Thousand

Cabinet wall mounting type 18 Gauge. (750 x 600 x 250) having Double Opening One Hundred

228 with M.S. fabricated stand, necessary lock & key arrangement follow as per Nos. 2.00 6,189.79 Eighty Nine

specification as mentioned in tender volume.. Rupees Seventy

Eight Paise

Supply installation ,Testing & commissioning of SS Fire Brigade connection

consisting of 2WAY. 63 mm instantaneous type male coupling with 125 mm Dia. Seven Thousand

Six Hundred Fifty

229 flanged outlet complete for fire water tank. No. 1.00 7,650.75

Rupees Seventy

Five Paise

Supply installation ,Testing & commissioning of SS Fire Brigade connection

consisting of 4WAY. 63 mm instantaneous type male coupling with 125 mm Dia. Eleven Thousand

flanged outlet complete for fire water tank. Seven Hundred

230 No. 1.00 11,731.15 Thirty One

Rupees Fifteen

Providing, fixing, testing and commissioning of Wall mounting Fix type First aid

Ten Thousand

Fire Hose Reel with 30 Mtrs Rubber Hose 25mm Dia IS : 444 Type II fitted wit SS Eight Hundred

231 Shutt off Nozzle follow as per specification as mentioned in tender volume.. Nos. 2.00 10,877.20 Seventy Seven

Rupees Nineteen

Supply installation , testing & commissioning of ISI Standard SS-304 branch pipe Four Thousand

with nozzle of 20mm nominal bore outlet as per IS:903 suitable to fit with One Hundred

232 standard instanteneous type 63mm dia coupling (SS-304) Nos. 2.00 4,182.41 Eighty Two

Rupees Forty

Supply installation testing & Commissioning of 25 MM dia Air Realese valve

Two Thousand

complete in all respects. (GUN METAL) Two Hundred

233 Nos. 2.00 2,294.72 Ninety Four

Rupees Seventy

Supply installation testing & Commissioning of Pressure guage 4" dial 0 to

kg/cm2 with syphon and cock complete in all respects (SS-304). Two Thousand

Three Hundred

234 Nos. 2.00 2,397.24 Ninety Seven

Rupees Twenty

Three Paise

Supply installation testing & Commissioning of 25 MM dia Ball Valve (SS-304) Nine Hundred

Sixty Nine

235 complete with SS Ball with single handed lever complete in all respects. Nos. 2.00 969.10

Rupees Nine

Providing & Installation of ABC Stored Pressure Type Fire Extinguisher 6 Kgs.

Two Thousand

capacity bearing ISI Mark for Fighting ABC Class of Fire. The Extinguisher will be Three Hundred

236 Manufactured Strictly as per BIS: 15683:2006 bearing ISI. Mark follow as per Nos. 5.00 2,355.72 Fifty Five Rupees

specification as mentioned in tender volume.. Seventy Two

Providing & fixing of Co2 type Fire Extinguisher 4.5Kgs. Capacity, made from the

brand new seamless cylinder, as per IS: 7285 and CCE approval, fitted with a Five Thousand

Discharge hose and horn and wheel type valve with initial Charge as per IS: Four Hundred

15683:2006 specification, bearing ISI Mark follow as per specification as Fifty Six Rupees

mentioned in tender volume.. Sixty Two Paise

Providing & fixing Modular type ABC Dry Powder Fire extinguishers 5 litre Four Thousand

capacity Fire Extinguishers. The Extinguisher will be Manufactured Strictly as per Four Hundred

238 BIS: 15683:2006 bearing ISI. Mark follow as per specification as mentioned in Nos. 5.00 4,447.03 Forty Seven

tender volume.. Rupees Three

Providing, fixing, testing and commissioning of On -Off Switch follow as per

Four Hundred

239 specification as mentioned in tender volume.. Nos. 3.00 408.65 Eight Rupees

Sixty Four Paise

Providing, fixing, testing and commissioning of below Auto Glow Signages follow Two Hundred

Thirty Three

240 as per specification as mentioned in tender volume.. Emergency Exit 4” X 12” Nos. 2.00 233.17

Rupees Sixteen

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

APPROVAL FIRE SYSTEM FROM LOCAL FIRE AUTHORITY

Getting of Fire Fighting System Approval from local fire authority with all other Thirty Thousand

241 charges and documentations for getting No Objection Certificate.(as per GMB Job. 1.00 30,300.00 Three Hundred

Approved rate) Rupees

Providing & fixing laminate finish partition up to false ceiling ht (thickness of

partition is 82 mm or as specified in drawing) having 12 mm thick marina

plywood IS 710 grade both side on aluminum framing of gauge 16. Aluminum

framing size for vertical & horizontal support is 50 mm x 25 mm. Grid of

aluminum framing is 600 mm x 600 mm. All exposed surfaces finished with

mm thick Laminate of approved shade complete with mat finish. Necessary

framing to be erected above false ceiling. No extra cost to be paid for the same.

Before installation, make hole/face plate for conduit pipes of electrical /

networking cables with open able stud from partition Including all materials and

labor etc. Make necessary grooves as per shown in drawing. Using of 12 mm thick Six Thousand Six

Hundred Twenty

242 clear glass with proper crystal edges & with suggested frosted films on glass. All Sqm 4.00 6,620.55

joints are covered with teakwood beading Patti finished with polish matching Rupees Fifty Five

with laminate. Including door of same design if required Complete with all

necessary hardware & adhesives as per details given in drawing and as per

instructions of Architect/consultant/Engineer In charge. Contractor has to provide

all necessary cut outs (race ways.) for Electrical works & no extra payment shall

be made for it.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles

having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for

Extra Strength The Light weight calcium silicate ceiling tiles shall have , light

reflection 85% noncombustible as per B.S. 476 part IV, 100% humidity resistance

and also having thermal conductivity0.043° w/m KC.for the best thermal

Insulation . The Light weight calcium Silicate tile shall be of approved texture Fine

fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of

0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level

suspended inter locking metal grid of hot dipped galvanized steel sections

(galvanizing @120 grams per sqm at joints to get required length and size of One Thousand

24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, Six Hundred

243 and centre to centre to form agrid of 1200X600mm and secondary thick Sqm 66.00 1,674.15 Seventy Four

(Minimum) sheet to be interlocked at middle of the 1200X600mm panel to form Rupees Fourteen

grid of size 600X600mm resting on periphery walls/partitions on a perimeter wall

angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum)

sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry

wall screws @ 230mm interval and laying 15mm thick Densified edges light

weight calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid

Providing & fixing work station / table having ht of 750 mm Top, with MS Pipe

powder coating and Back and side Ply of table is also made up of 19mm Thick.

Top of Table is 19mm thk ply with laminate Finish Per Requirement and All

internal & external Joints finished with teakwood beading Patti. Common or front

Twenty Four

Part of Table is Sectationized with MS Perforated Sheet. All exposed and internal

Thousand Eight

244 surfaces covered with Laminate Finish of approved shade & Complete as per Sqm 42.00 24,870.53 Hundred Seventy

detail drawings & as instructed by Architect/consultant/ Engineer In charge. Rupees Fifty

Complete with all necessary hardware like nails, ss screws, table chain, Key board Three Paise

trey, TDS channel, adhesives etc. Contractor has to provide all necessary cut outs

for Electrical works & no extra payment shall be made for it.

Providing & fixing office table / staff table having ht of 750 mm Top, with 19mm

and Back and side Ply of table is also made up of 19mm Thick. Top of Table is

19mm thk ply with laminate Finish Per Requirement and All internal & external

Joints finished with teakwood beading Patti. Item includes fixing of drawers and

keyboard tray and storage with shutters under table as per drawing. With grooves Twenty Nine

shown as per drawing. All exposed and internal surfaces covered with Laminate Thousand Three

245 Finish of approved shade & Complete as per detail drawings & as instructed by Sqm 8.00 29,350.96 Hundred Fifty

Architect/consultant/ Engineer In charge. Complete with all necessary hardware Rupees Ninety

Five Paise

like nails, ss screws, table chain, TDS channel, adhesives etc. Contractor has to

provide all necessary cut outs for Electrical works & no extra payment shall be

made for it. All ply should follow IS

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Open Storage Rack (Laminate FINISH)

Providing & fixing Any ht storage having depth of 350mm/450mm/600 mm,

having skirting of 75 mm, including vertical supports & horizontal shelves shown

as per drawing made by 19 mm thick Marin ply, Open Front Side for Selves with

using 12 mm thick Marin ply for framing. All complete with proper teakwood

beading and Teakwood molding as per design. Back ply is 12 mm Marin ply. All Ten Thousand

exposed are covered with 1 mm thick Laminate & internal surfaces are covered Three Hundred

246 with 1 mm thick laminate. External & internal joints covered with beading Patti Sqm 60.00 10,381.62 Eighty One

complete with polish finish. With grooves shown as per drawing. All complete Rupees Sixty One

with proper hardware like, S.S. Screws, MS Nails, Magnets, cable manager SS

etc. All Details as per shown in detail drawings & as per instructions of

architect/consultant / in charge engineer

Storage with Shutter (Laminate FINISH)

Providing & fixing Any Height storage having Any size of having depth of

350mm/450mm/600 mm, having skirting of 75 mm, with proper locks. includinf of

vertical supports & horizontal shelves shown as per drawing made by 19 mm thick

Marin ply, having shutters of 19 mm thick ply or Clear Glass with using 12 mm

thick Marin ply for framing. All complete with proper teakwood beading. and

Teakwood molding as per design. Back ply is 12 mm Marin ply. All exposed are

Thousand Eight

247 covered with 1 mm thick Laminate & internal surfaces are covered with 1 mm Sqm 41.00 13,815.77 Hundred Fifteen

thick laminate. External & internal joints covered with beading Patti complete Rupees Seventy

with Polish finish. With grooves shown as per drawing All complete with proper Six Paise

hardware like locks, S.S. Screws, MS Nails, Magnets, table chains, cable manager

SS 304 Handles of 250 mm and 100 mm dia etc. All Details as per shown in detail

drawings & as per instructions of architect/consultant / in charge engineer

Notice Board / Pin Board

Seven Thousand

Supplying of Notice Board of 3'x 3' (or as specified) with all Fixing Arrangement Two Hundred

248 complete as per drawing and Directed by Engineer In Charge etc complete. Nos 4.00 7,259.38 Fifty Nine Rupees

Thirty Seven

Providing and fixing News paper stand size 650 x 820 x 1200 or required height

made out of 18 mm wtr.prf. [MR Grade] ply with 1 mm. thk inner laminate for

top including back panel with shelves for magazine and news paper as shown in

Thousand Forty

249 drawing, all expose joints finish with teakwood beadsing patti with polish finish Nos 2.00 13,044.62

Four Rupees

and provision of openable top for news paper storage complete as per detailed Sixty One Paise

drawings and Engineer-In Charge and Architect

Supplying and providing reading chairs with PP arms with soft PU pads, Seat and

back upholstered with cushioned and MS powder coated frame and cantilever

legs. Overall dimension 590 L x 600 W x 915 H (Or as specified) complete as Six Thousand

directed by architect and product as per given specification. Complete as per Sixty Rupees

architectural design and concept and approved by Architect & Client.

Supplying and providing High Back Mesh office Chair As per specification below:

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Adjustable Head rest

-Fixed Arm rest

Ten Thousand

-Knee tilt mechanism

Seven Hundred

251 -360 swivel motion/ 100mm stroke gas Nos 1.00 10,738.07

Thirty Eight

-Nylon Star base Rupees Six Paise

-Pushback mechanism & Comfy seating.

-Complete as per architectural design and concept and approved by Architect &

Supplying and providing Mid Back Mesh office Chair As per specification below:

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Center tilt mechanism

Five Thousand

-100mm class 4 gas lift

Twenty Four

252 -PP Fixed Arm rest Nos 8.00 5,024.65

Rupees Sixty

-Nylon Star base/Twin wheel nylons casters Four Paise

-Complete as per architectural design and concept and approved by Architect &

Supplying and providing dust bin made of 100% virgin plastic with paddle. Five Hundred

Fifty Seven

253 Capacity-10 to 15 Ltr. Nos 5.00 557.52

Rupees Fifty Two

Supplying and providing dust bin made of 100% virgin plastic with paddle. One Thousand

Capacity-120 L Five Hundred

254 Nos 3.00 1,568.03 Sixty Eight

Rupees Two

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

Blinds : Providing and fixing as per approved make manual roller blinds with

Soltis fabric & spring drive system with steel ball chain/one touch with speed

control action roller blind with end brackets with head ail, components, bottom

bar.Color-Alu with manual operation and warranty etc as per manufacturer’s

specifications. Fabric to be as per approved sample. All the work complete as per

the detailed drawing and instruction of Architect/EIC. Soltis-99-Color-Alu fabric:

39% Polyester/61% PVC with Aluminum Backing. Weight:290 g/sqm,

Thickness:0.32 mm, Openness Factor:3%, Visible Light Transmission (N-N): 2%-4%, One Thousand

Solar reflection (white) 65%, Internal Solar Factor (gtot): 0.35 - 0.48, Tensile Nine Hundred

255 Strength (Warp/Weft):160/170daN/5cm,Tearing Strength(Warp/Weft):11/13daN, Sqm 115.00 1,962.94 Sixty Two Rupees

Fungi static Treatment: Degree 0, Excellent (EN ISO 846-A) Fire Retardancy:B- Ninety Three

s2,d0/EN 13501-1. All complete as per approval of designer & instruction of

Project Manager. (The mode of Measurement: The size of the blind will be

measured from end to end bracket (Left to Right bracket) & height will be

measured from top of the pelmet till the bottom of the bottom bar

Providing and fixing Godess Saraswati idol (Material- Fibre) 5 ft tall, with One Hundred

proportionately base dimenstion as per approved design by client and complete Fifty Thousand

256 as per instruction of engineer-in charge and consultant. Nos 1.00 150,995.00 Nine Hundred

Ninety Five

Providing and fixing Wall art/Photoframes of size 2ftx2ft with wooden frame of

Two Thousand

size 2in x 1in consisting 6mm thick ply in back with digital vinyl printing and 5mm Four Hundred

257 thick glass on top if required. Nos 30.00 2,497.23 Ninety Seven

Rupees Twenty

Providing & fixing 75' UHD 4K Smart LED TV, Screen Resolution 3840 x 2160 pixels One Hundred

258 client an architect. Nos 1.00 102,067.57 Sixty Seven

Rupees Fifty

Seven Paise

Providing and fixing PCs with configuration of Core I5 12th Gen, 8Gb RAM DDR4,

256 GB SSD +1TB HDD, WIN.11 HOME MS OFFICE 2021 STUDENT, Full HD display Fifty Nine

of 21 to 23.8' with keyboard and mouse. Thousand Seven

259 Nos 8.00 59,748.35 Hundred Forty

Eight Rupees

Thirty Four Paise

Providing and fixing Automatic Duplex laser printer with 30 pages per minute

Fifteen Thousand

print speed, 8 mb memory, Large 250 sheet paper tray with USB connectivity. One Hundred

260 Nos 1.00 15,157.58 Fifty Seven

Rupees Fifty

Seven Paise

Supplying and providing xerox machine- -20PPM Copy / Print /Color Scan / Duplex Fifty Eight

261 DADF /Single Nos 1.00 58,075.00

Tray Seventy Five

Providing and fixing Directional and Informative Signages- SS Plate, Grade

Ninety Two

Brush finish, 2mm Thickness with smoothen corner edges, Acid etching with duco Thousand Four

262 color, SS studs 1.5' away from wall.fitting as per dirction of Architect and EIC Sqm 1.50 92,433.18 Hundred Thirty

Three Rupees

Eighteen Paise

Providing and Fixing Library Name in Gujarati Letter SS304 1mm thick letter 1.5"

depth 10" Height with Duco color & fitting as per direction of Architect & EIC. Thousand Five

Hundred Twenty

Total Amount

Total Amount

Total Amount Rs. =

Total Amount Rs. =

I/We am/are willing to carry out the work @............ % above/below percent ( should be written in figures & Words) of the estimated rates mentoined above . Amount

of my/our tender work out as under .

Estimated amount put to tender Estimated amount put to tender

Deduct:……………………...….% below Rs……………………………………………… Add……………………..……..% above Rs…………………..………………………

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Rate In Figure Rate In Words

IN words IN words

(Please strike out whichever is not applicable.)

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

4 S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of

original item at the rate of input rate mentioned in all the tender.

Signature of Contractor with Seal Signature of Contracting Authority with Seal