GENERAL RM RC1 KARUKACHAL ZONE II 2025 26 One year Running contract for various roads under PWD Roads Section Karukachal ZONE II in Kottayam District8 Road Stretches for a total length of 22.929KM General Civil Work1

Amount

Appendix A Reactive Maintennce

55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.9.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface.

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD217570/2024-2025:Mix Seal Surfacing providing ,laying and rolling of close graded premix surface material of 20mm thickness composed of 11.2mm to .09mm (Type A) or 13.2mm to 0.9mm (TypeB)aggregates using penetration grade bitumen using VG 30 to the required line ,grade and level to serve as wearing course on a previously prepared base ,including mixing in a suitable plant ,laying and rolling with a three wheel 8-10KN static roller and finishing to required level and grades as per Technical specification Clause 509 of MORD - Bitumen @ 22.00kg/10m2By Manual Means

3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

12.8.1.C.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer

OD202705/2024-2025:Providing and fixing Vinyl sticker including lettering and symbols for existing DLP Board 1.22m x 0.61m size including Painting all exposed surface with 2 coat of epoxy painting etc.

OD231782/2024-2025:Providing and fixing 1.22m*0.61m size DLP board of with suitable supporting back supporting frame of MS ANGLE 25*25*5 and supported on GI Pipe pole 50mm NB CONFIRMING TO is 1239 firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete minimum size45cm*45cm*45cm, 45cm below ground level including painting all exposed surface with two coat of epoxy painting over epoxy primer including lettering symbols by using vinyl sticker etc . complete

Appendix B Proactive Maintenance

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD217566/2024-2025:Mix Seal Surfacing providing ,laying and rolling of close graded premix surface material of 20mm thickness composed of 11.2mm to .09mm (Type A) or 13.2mm to 0.9mm (TypeB)aggregates using penetration grade bitumen using VG 30 to the required line ,grade and level to serve as wearing course on a previously prepared base ,including mixing in a suitable plant ,laying and rolling with a three wheel 8-10KN static roller and finishing to required level and grades as per Technical specification Clause 509 of MORD - Bitumen @ 22.00kg/10m2By Manual Means

Appendix C Premonsoon work

2.2:Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area

OD202707/2024-2025:Filling up of potholes with bituminous ready mix compound (25kg bag) and compacting by ramming to get a compact surface including of cost of materials, laying charges transportation to site etc complete rate is arrived for a bag of 25kg.

10.3:Maintenance of Earth Shoulder (stripping excess soil) from the shoulder surface to achieve the approved level and compacting with plate compactor

OD202710/2024-2025:Hire And Running charges forTipper

OD202709/2024-2025:Arranging man mazdoor for cutting earthen drain,diverting blocken water, and other various works

OD202711/2024-2025:Engaging Skilled Labour for Tree cutting

2.3.2.A:Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness In area of light jungle - By Mechanical Means

OD202708/2024-2025: Hydraulic Excavator of 1 cum bucker

Appendix D -Routine Inspection

OD202706/2024-2025:Engaging labor with passenger car not less than1000cc for conducting and reporting routine inspection for 20km for the entire length of project road at a frequency of 7 days throughout the agreement period of Running Contract as per the direction of departmental officer.

Antony Jim (BID ID -2234855)

NIKHIL T REJI (BID ID -2234929)

Bidder Name

P.M KABEER

NIKHIL T REJI

Antony Jim