Repairing Work Of Different Drainage/Strom pumping Station in West Zone, AMC Area. (Single Bid)(Tender Cost:- Rs.99,34,256.00)

Name of Work : Repairing Work Of Different Drainage/Strom pumping Station in West Zone, AMC Area.

Sr. No. Item Description Qty Units Rate Amount

1.0 Excavation for foundation upto 1.5 m depth including sorting

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.

(A) Loose or soft soil

a) 0 to 1.5 meter depth 250 CMT 115.92

b) 1.5 to 3.0 meter depth 150 CMT 128.52

c) 3.0 to 5.0 meter depth 150 CMT 141.11

Conveyance charge of earth, lime, murrum, building rubbish, manual

2.0 garbage, sludge, excavated rock, fly ash, aggregate of any kind etc., comp.

a) Conveyance charge 5 km lead 400 CMT 235.51

Filling available excavated earth (excluding rock) in trenches. plinth,

sides of foundations etc. in layers not exceeding 20 cm. in depth

3.0 consolidating each deposited layer by ramming and watering. 50 CMT 129.10

Filling in plinth with sand under floors including watering, ramming,

4.0 consolidating and dressing etc. Complete. 40 CMT 455.63

Demolition including stacking of serviceable materilas and disposal of

5.0 unserviceable materials with all lead and lift.

a) (i) R.C.C work 50 CMT 1047.38

Demolition of Brick work and stone masonry including stacking of

6.0 serviceable materilas and disposal of unserviceable materials with all lead

a) (ii) In Cement Mortar. 50 CMT 544.95

Dismentaling tiled of stone floors laid in mortar including stacking of

7.0 serviceable materilas and disposal of unserviceable materials with all lead 500 Smt 47.25

Dismantaling doors, windows, ventilators etc. (woodorsteel) shutters

including chowkhats, architraves, holdfasts and other attachment etc.

8.0 complete and stacking the materials with all lead and lift.

a) (i) Note xceeding 3 Sq.M. in area. 40 Each 185.85

b) (ii) Exceeding 3 Sq.M. in area. 40 Each 248.85

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc.

9.0 stacking of serviceable materilas and disposal of unserviceable materials with 500 Smt 47.25

all lead and lift. (i) G.I.sheet roofing.

Dismentalings manglore of country tile roofing with battens boarding etc.

including stacking of serviceable materilas and disposal of unserviceable

10.0 materials with all lead and lift. (ii) A.C. sheet roofing. 250 Smt 86.63

11.0 Providing Scaffolding for Demolation, Plaster work & painting work by "H"

Frame Stand of by any means like bamboo, valli etc. inluding carting material

work site and removing after compltion of work. Rate include any type rent 500 Smt 40.00

etc complet for any height as directerd by engg. incharge.(Non SOR)

12.0 Providing and laying cement concrete 1:3:6 (1-Cement: 3 - Coarse sand : 6 -

Graded brick bat aggregate 40 mm normal size) and curing complete

excluding cost of form work.(A) Foundation and Plinth 250 Cmt 2976.00

13.0 Providing and laying in position Ready Mixed M- 200 grade concrete for

reinforced cement conctere work , using cement content as per approved

Design Mix manufactured in fully automatic batching plant and transported to

site of work in transit mixer for a lead up to 10 kms having continuous

agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit

mixer to site of laying, excluding the cost of centering shuttering finishing

and reinforcement including cost of admixtures in recommended proportions

as per IS: 9103 to accelerate/ retard setting of concrete, improve workability 100 Cmt 4793.10

without impairing strength and durability as per direction of

the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS

456 shall be maintained)

14.0 Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level 1000.00 Kg 75.46

15.0 Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls for interior plastering upto floor two level and

finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) 2000 smt 155.61

16.0 20mm thick sand faced cement plaster on walls upto height 10 metres above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement :

3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. 2500 smt 297.68

17.0 Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional 30 Cmt 4011.66

18.0 Extra for brick work in superstructure above plinth level upto floor two level

(B) Conventional

19.0 White washing with lime on wall surface (two coats) to give an even shade

including thoroughly booming the surface to remove all dirt, dust; mortar 1000.00 Smt 12.29

drops and other foreign matter.

20.0 Painting one coats (excluding priming coat) on previously painted steel and

other metal surface with enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign matter. 1000.00 Smt 54.35

21.0 Painting two coats (excluding priming coat) on new steel and other metal

surface with synthetic enamel paint, brushing to give an even shade including

cleaning the surface of all dirt, dust and other foreign matter. 1000.00 Smt 64.66

22.0 Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly brushing

the surface to remove all dirt, and remains of loose powdered materials.etc 10000.00 Smt 113.40

Brands:- Asian Paint, Berger Paints, Nerolac Paint

23.0 Distempeing (Two coats) with oil bound washable distemper of approved

brand and of required shade on wall surfaces to give an even shade, after

thorouhly brushing the surface clean of all greasedirt, loose pieces of scales

and also including distempering with oil bound washable distemper of 8500.00 Smt 76.08

preparing the surface even and sand papered smooth. Brands:- Asian Paint,

Berger Paints, Nerolac Paint

24.0 Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign 10000.00 Smt 78.44

matter and sand papered smooth.

25.0 Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and 5000.00 Smt 40.19

sand papered smooth.

26.0 Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround, square

or round bars with round headed bolts and nuts or by screws (A) Plain Grill. 2500.00 kg 100.17

27.0 Providing and fixing 35 mm thick shutters for Doors, windows and clerestory

windows including Indian teak wood frames 10 cm x 7 cm. size including

anodized alluminium fixtures and fastenings including primer coat of

approved quality and two coats of oil painting etc, complete. (ii) Fully 50 Smt 5285.45

28.0 Providing erecting and fixing double coated ISI water tank of required

capacity each with all necessary fittings and connection etc. complete on

terrace (approved brand and make) 8000.00 ltr. 3.91

29.0 Providing & fixing to wall ceilling and floor galvanised M.S. tubes medium

grade of following nominal bore, tube fittings & clamps incl. Making good

the wall ceiling & floor.

30.0 Providing and fixing wsh down water closet (European type, W.C. Pan) with

integral P or S trap including jointing the trap with soil pipe in Cement

Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid 25.00 No. 1290.80

for separately)(A) vitreous China Pattern : (i) in white colour

31.0 Providing and fixing Urinal of approved quality including connection with

trap and with integral longitudinal flush pipe.(A) Squating plate pattern white 25.00 No. 1535.63

earthenware 550mm x 300mm.

32.0 Providing and fixing washbasin with single hole for pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 25.00 No. 1400.18

mm x v 400mm size. (i) In white colour.

33.0 Providing & fixing screw down bib taps of Brass screw down bib tap

polished bright.

a) 15 mm dia. 25.00 each 184.98

34.0 Provdg. & fixing Gun metal check or non return fullway wheel valve.

35.0 Providing and laying white glazed tiles 6mm thick in flooring treads of steps

and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand ) finishing with flush pointing in white cement. 250.00 Smt. 908.17

36.0 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush pointing in white cement. 250.00 Smt. 1062.50

37.0 Providing and laying polished Kota stone slab (Polished, Green colour)

flooring over 20 mm. (average) thick base of cement mortar 1:6 (1 cement :

coarse sand) or lime mortar 1:1.5 laid over and joined with grey cement slurry 250.00 Smt 982.83

including rubbing and polishing complete.25 mm th.

38.0 Providing and Laying of Rubber Moulded Paver Block Grey/Coloured 60 mm

thick, M-35 Grade of any size ; shape (Usually Uni-Paver Blocks) using black

trap good quality aggragate of 20 mm nominal size for footpath, parking

areas, service lanes and other areas as mentioned in the drawing / instruction

of engineer in charge. Cost includes formworks using rubber mould, Rate

providing and laying paver blocks as per required grading and specification.

The paver block shall be mechanically compacted. The work of paving blocks

shall be executed in line and level by skill mason of flooring work only. It

should be laid in such a way that the no cutting of the paver block to be

necessary. if cutting of paver block necessary then it should be cut by

machine only and carting. The finished surface of the paver block shall have

resonably good, plain finished. Paver blocks shall be compacted and shall be

relaid if necessary. Gravel or such type of materials shall not be allowed for

production. Laying on 5 cms thick sand bedding.

39.0 Providing cement vata ( 10 cm. x 10 cm. size) quarter round in cement mortar

1:1 including neat cement finishing, watering etc. complete 500.00 Rmt. 23.45

40.0 Providing and laying cement concrete flooring 1:2:4 (1-cement :2-coarses

and:4-graded stone aggregate 20 mm nominal size) laid in one layer and

finished witha floating coatofneat cement. (B) 50 mm thick. 250.00 Smt 348.08

41.0 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base

of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including finised with flush 100.00 Sq.M. 1383.99

pointing & cleaning the surface etc. complete for antiskit.

42.0 Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete.

43.0 Providing and laying broken chine mosaic flooring for terrace using 12 mm to

20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar creme out upto surface

using white cement including rounding off junctions and extending them upto 350.00 Sq.M. 739.89

15 cm along the wall,clearing with water and oxalic acid etc. as directed.

44.0 Providing & Fixing in position Alluminium doors with frame using approved

quality anodised extruded alluminium section as approved by Engg.in charge

(Jindal alluminium) (a) Frame sections 101.6 x 44.45 mm (b) Shutter bottom

vertical & topsection 83.5 x 44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter

bottom section at 114.3 x 44.45 mm at(1.37 kg/mt) Shutter middle section at

100 x 44.3wt.(1.37 kg/mt) incl.providing & installing 5 mm thk approved

color Acrylic sheet of standard quality fixewith glazing chips on upper pannel

& Laminated sheet on lower pannel (wt.0.13 kg/Rmt etc.comp.as direction of

engg.in charge.

45.0 Providing & Fixing in position Alluminium window sliding / fix type with

frame using approved anodised extruded alluminium section as approved by

Engg.incharge.(Jindal alluminium) units equivalent (a) Frame sections 65 x

25 mm (at 0.41kg/mt) (b) SlidingFrame bottom section of 61.85 x 31.75 mm

(at 0.41kg/Rmt) (c) Shutter top & bottom section 40 x 18mm (wt.0.41 25.00 Sq.M. 2350.00

kg/Rmt) (d) Shutter interlock verticalsection 10 x 18 mm.(0.41 kg/Rmt) (e)

Shuttervertical of 40 x 18 mm (0.41 Kg/Rmt) including P/Finstalling 5 mm

thick approved color Acrylic sheet of standard quality etc.comp.

46.0 Providing and fixing 30mm thick FACTORY MADE SOLID BOTH SIDE

PRELAM PANEL PVC DOOR SHUTTER consisting of frame made out of

tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, top and

bottom rails. M.S. frame shall have a coat of steel primer of approved makde

and manufactures. M.S frame covered with 5mm thick heat moulded prelim

PVC ‘C’ channel of siz 30mm thickness, 70 mm width of which 50mm shall

be flat and 20mm shall be tapered in 45 degree

Angle on either side forming stiles, and 5mm thick, 95mm wide pream PVC

sheet out of which 75mm shall be flat and 20mm shall be tapered in

degree on the inner side ot form top and bottom rail and 115mm wide prelim

PVc sheet out of which 75nmm shall be flat and 20mm shall be -

sqm 2214.00 tapered on both side to form lock rail, Top, bottom and lock

rails shall be provided either side of the

panel. 10mm (5mm x 2) thick 20mm wide cross PVC sheet shall be provided 50.00 Smt 2214.00

as gap insert for top rail and bottom rails. Panelling of 5mm thck both side

prelim PVC sheet to be fitted in the M.S. frame welded,sealed to the stiles

and rails with 7mm (5mm + 2 mm) thick x 15mm wide PVC sheet

beading on inner side, and joined togeth with solvent cement adhesive. An

additional 5mm thick PVC strip of 20mm width is to be stuck on the interior

side of the ‘C” chanel using PVC solvent adhesive etc. complete as per

direction of Engineering in charge, manufacture’s specification and rawing.

47.0 Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30 cm length x 30 cm heigh and 15 cms thick of M-250 grade

concrete as per approved design and including excavation for fixing in proper 100.00 Rmt 358.06

line and level, filling the joints in C: M 1:3 (1 Cement : 3 Fine sand) etc.

48.0 Providing RCC precast M.H. Frame & Cover manufacture, supply and

delivery at storeor at site of work precast RCC M 200 frame & cover suitable

to drainage M.H. and as per type design & drawing including cost of

reinforcement M.S.Angles or Flat, curing mold work etc.

Frame suitable for 50 cm opening of MH 25.00 No. 1121.00

Cover suitable for 50 cm opening of MH 25.00 No. 1173.00

49.0 Providing formwork of ordinary timber planking so as to give a rough finish

including centering shuttering strutting and propping etc. Height of propping

and centering below supporting floor to ceiling not exceeding 4 M. and

removal of the same for in situ reinforced concrete and plain concrete work 40.00 smt 171.68

in. (A) Foundations Footings Bases of Columns etc. and Mass concrete.

50.0 Providing formwork of ordinary timber planking so as to give a rough finish

including centering shuttering strutting and propping etc. Height of propping

and centering below supporting floor to ceiling not exceeding 4 M. and

removal of the same for in situ reinforced concrete and plain concrete work 40.00 smt 252.00

in. (B) Flat surfaces such as soffits of supspened floors slabs Landings and

the like. (1) Floors etc. upto 200 mm in thickness. (upto 10 ton)

51.0 Providing formwork of ordinary timber planking so as to give a rough finish

including centering shuttering strutting and propping etc. height of propping

and centering below supporting floor to ceiling not exceeding 4 M. and

removal of the same for in situ reinforced concrete and plain concrete work

in. (C) Vertical surface such as walls (any thickness) partitions and the like 40.00 smt 229.95

including attached buttresses & string course & the like. (upto 10 ton)

55.0 Providing, laying, spreading and compacting graded stone aggregate to wet

mix macadam specification including premixing the Material with water at

OMC in mechanical mix plant carriage of mixed Material by tipper to site,

laying in uniform layers in sub- base / base course on well prepared surface 200.00 Cmt 1526.77

and compacting with plate compactor to achieve the desired density

56.0 Providing corrugated G.I. sheets roofing fixed with galvanized iron ‘J’ or ‘L’

hook bolts, and nuts 8 mm. dia with bitumen and G.I. limpet washers filled

with white lead complete excluding the cost of purlines, rafters and trusses.

a) (I) 0.8 mm. thick sheet. 100.00 Smt 719.93

57.0 Repairing and refixing corrugated GI sheet incl.cutting it if necessary and all

fixures for fittings of sheet as per instruction of engineer incharge. 150.00 Smt 72.00

58.0 Providing & Fixing 3 mm thick F.R.P.sheet of Approved Quality & Color /

Pattern as per Consultant's design also includes required fabrication structure

in the grid of 2'-0 x 2'-0 size using hollow pipe of 16 gauge & size 2"x 1" &

1"x 1",G.I. & Bitumen Washers,Silicon paste application for fixing the

sheet.Rate also include necessary bending,cutting,labour charges,Zinc Primer 50.00 Smt 1930.00

coat & Two coats of oil painting of color as approved by consultants &

making good the wall.(N.S.)

59.0 Providing 2 mm thick F.R.P.Gutter with necessary M.S.Supporting Brackets.

60.0 Providing and fixing five course water proofing treatment felt consisting of

second and fourth course of blown bitumen or/and residual bitumen applied

hot 1.20 kg. /sq.mt. of area for each course and first course and first course

with fibre base bittumin saturated under lay type and third course with fiber

base self finished felt type 2 Grade – I, fifth and final course of stone grit

mm. and down size or pea sized gravel spreaded at 0.008 cum/sq.mt.

including preparation of surface, excluding grading complete.

61.0 Cutting out crack of the roof terrace to V section. Cleaning, wetting,

grouting, with cement and sand slurry 1:3 (1 cement : 3 sand) 200.00 Rmt 64.58

62.0 Providing & Fixing tiles roofing with manglore tiles including teak reepers of

sizes 50mm x25mm. (upto 10 ton)

63.0 Providing corrugated G.I. sheet of class-3 roofin fixed with glavanished iron J

or L Hooks, Bolts an nuts 8mm diameter with bitumen and G.I. limpe washer

or G.I. limpet washer. filled with white lea complete excluding the cost of 10.00 Sqm 719.93

purlins, Rafters an Trusses.(1) 0.80 mm thick sheet.

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle

posts 40mm x 40 mm x6 mm and oil painting 3 coats fixed at 2.5 Mt,C/c.

with five Horizontan lines and two diagonals of galvanised steel barbed wire

weighting 9.38 Kg. per 100 Metre, strained and fixed to posts with G.I,staples

64.0 including fixing the postsin ground with 0.5 M x 0.5.M x 0.5 M. block in 100.00 Rmt 385.40

C.C1:5:10 etc complete.

Providing and Supplying ISI standard R.C.C pipes(of Sulphate Resisting

Cement) in standard lengths of following class and diameter suitable

for either collar joints or rubber ring joints including all taxes,

insurance, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to departmental stores, stacking

etc.complete As Directed by engineering in charge.(IS-458/1989)

66.0 L,L & J of R.C.S. Pipes

Lowering, laying and jointing R. C. C. pipes of following diameters in

proper position, grade and alignment at all level as directed by

Engineer-in-charge including conveyance from stores to site of work,

labour, giving hydraulic testing as per ISI code.

Class NP2,NP3,NP4

Making connection to the ex.M.H.in running sewer incl. Dewatering and

other required machinery etc. of following dia pipes at any convenient time.

67.0 All damaged work shall be well repaired as per instructions. etc..complete.

a 150 mm to 300 mm dia. 5.00 Nos 1500.00

b 400 mm to 600 mm dia. 5.00 Nos 2500.00

c 700 mm to 900 mm dia. 5.00 Nos 3500.00

Providing and Fixing 1 H.P. Electrical monoblock or submarcible water

68.0 pumps with motor and required cable and switch board of approved brand 1.00 NO 6800.00

and make etc.comp.as directed.

Providing & Supplying JCB Machine on rental basis in case of emergency

situation and break down type work & also during unavoidable condition as

per instruction of engg.incharge , rate includes all nece. shifting, fuel and

operating charges and stacking of useful & non-useful materials separately up

to store. (No payment should be allowed for non working condition of

69.0 machinery and for pipe line excavation and laying work) 150.00 Hr 535.71

(AMC Water ARC SOR 15-16 It.No.24 pg.no.4 - 12% GST)

70.0 Hiring of Hydra / Crane with Driver (8 working Hours in Day)

(i) Hiring of crane 10.00 Day 6412.47

(ii) Hiring of Hydra

Hiring of Tractor with trolley considering 8 hrs. as working day hours incl.

Driver 45.00 Day

Hiring of Three wheeler carrier (Chakado Rickshaw) considering 10 hrs. as

working day hours incl. Driver 12.00 Day

Dewatering by pumping set of Dewatering by pumping set of required

capacity including temporary platform carting pumping at site and fixing the

73.0 same in position including all accessories, and fuel and labour etc. complete. 500.00 H.P/Hr 18.32

Pump set of Capacity

Structural steelwork riveted, bolted or welded in built up for all type sections,

inframed work, including cutting, hoisting, fixingin positionand applying

74.0 apriming coat of approved steel primer all complete as per the structural 50.00 kg 126.68

design sand directions of Engineer in charge.