Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.8 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹23.3 L+₹1.3 L (5.70%)Rejected-Finance POST MISAMARI DIST SONITPUR ASSAM 784 506 | SONITPUR | ASSAM | 784506 | L2 | Rejected-Finance NOT BEING LOWEST BID |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
10 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MISAMARI
PO-Missamari Dist-Sonitpur Assam
REPAIR TO CERTAIN MISC B/R WORKS AT LAMA CAMP AREA UNDER GE MISAMARI
2022_MES_557374_1
8285
Open Tender
Civil Works
Item Rate
270 days
GE MISAMARI
PLEASE REFER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
Yes
GE MISAMARI
₹60,000
Yes
16 May 2023
13 Oct 2022
12 Nov 2022
13 Oct 2022
10 Nov 2022
27 Oct 2022
60 days
Amount
Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises, complete all as specified and directed.
M&L for glazed ceramic coloured tiles, glossy finished of size 450x350x7mm thick as in vertical surfaces such as skirting/dados and riser of steps, over and including including 10 mm thick rendering/backing coat in CM 1:4 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles,complete all as specified and as directed.
M&L for Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.11 Sqm but n.exc. 0.18 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.
M&L for Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles, complete all as specified and directed.
M&L Vitrified Ceramic double charged tiles 10 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles, complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish, complete all as specified and directed.
M&L for brick work with burnt modular bricks built in cement mortar 1:6 straight or curved on plan exceeding 6mtr mean radius, complete all as specified and directed.
M&L for brick work with burnt modular size bricks built in cement mortar 1:4 straight or curved on plan to any radius in half brick thick walls, complete all as specified and directed.
Demolition of reed lathing single or double including battens and plaster or chicken wire lathing, complete all as specified and directed.
S&F GI Wire netting 0.9 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc., in walls, ceilings, stanchions, beams, etc., including all laps, cutting and waste, complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed.
M&L for 15mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement, complete all as specified and as directed. Note : WPC Shall be measured and paid separately under relevant item.
M&L for rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth, complete all as specified and as directed.
M&L rendering 10mm thick on on otherside of lathing in cement mortar 1:6 be finished fair & even without using extra cement, complete all as specified and as directed.
Supply only Integral water proofing compound
Dismantling fillets, rails, posts, rafters, purlins etc. under 40 Sqcm in section, complete all as specified and as directed.
S&F second class hard wood plain fillets in rectangular or triangular in section, clean swan secured with screws or beads sectional area exc. 13 sqcm but n.exc.25 sqcm, complete all as specified and as directed.
Dismantling Unframed timber scantlings 40 Sqcm and over in section and in any position, complete all as specified and as directed.
M&L 2nd class hard wood in scantling wrought timber unframed and fixed, complete all as specified and as directed.
Dismantling of timber boarding of any description fixed in any position with nails, complete all as specified and directed.
S&F 50 mm thick second class hard wood boarding with butt joints clean sawn fixed with nails in any situation (except flooring and skirting), complete all as specified and directed.
S&F 20 mm thick planed both sides, second class hard wood boarding with butt joints clean sawn fixed with nails in any situation (except flooring and skirting), complete all as specified and directed.
Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames), complete all as specified and directed.
Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame), complete all as specified and directed.
S&F facroty made Second class hard wood kiln seasoned and chemically pressure treated plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.
S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.
S&F 35 mm thick factory made Second class hard wood kiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc, complete all as specified and as directed.
S&F for 2nd class hard wood 30mm thick glazed and skeleton shutter open rebated and prepared to receive glass gauge etc divided into square with rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc (size of members of shutters as specified in SSR Par –I section 8 Clause 8:24 (b) complete all as specified and directed.
S&F Solid PVC Door Frame of size 100mmx45 mm made out of 5mm wood grain colour PVC Sheet reinforced with MS Square etc, complete all as specified and directed.
Supplying and fixing in frame at site, factory made solid panel pvc moulded door shutter 28 to 30 mm thick (style) with 2,4,or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.
M&L for taking down and refixing the same existing aluminium door shutters for carrying out repairs as required, removing the existing beading and fixing new rubber beading of suitable size with adhesive, overhauling of floor springs including greasing and oiling as required, each shutter area n. exc 2 Sqm, complete all as specified and directed.
Hacking out old broken glass ( any thick ness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and provoding and fixing new ones, complete all as specified and directed.
S&F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed.
S&F for GI wire cloth with 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple, complete all as specified and directed.
S&F in repair GI wire cloth with 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple, complete all as specified and directed.
S&F 100 mm long medium weight, cold rolled mild steel Butt hinges and fixed, complete all as specified and directed.
S&F 75 mm long medium weight, cold rolled mild steel Butt hinges and fixed, complete all as specified and directed.
S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.
S&F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.
S&F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.
S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.
S&F aluminium alloy 300mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy and fixed, complete all as specified and directed.
Supply fix in repairs Harrison rails, mild steel, chromium plated fixed alongwith 2 Nos. of brackets, stops, rollers etc, complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets,complete all as specified and directed.
S&F for Anodised aluminium/ GI snap grid power coated framed work of size main runner 39x24.70x0.80 mm, cross tee size 29.x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling all as specified with 4mm thick GI suspender, complete all as specified and as directed.
M&L for 4m thick Non Asbestos designed fibre cement building boards fixed or laid/inserted to timber/GI/ Aluminium framework with screw in ceiling flat or sloping, complete all as specified and as directed.
S&F in repairs 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle/push flush type brackets etc complete all as specified and as directed.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white incl seat cover of plastic, CP jet and pipe etc complete incl necssary PVC pipe fittings, P or S trap, complete all as specified and as directed.
S&F in repairs vitreous china squatting Orissa pattern Water closet, size 630x450 mm white, with 'P' or 'S' Trap, integral foot rests etc. complete including making good to floor, complete all as specified and as directed.
S&F in repairs for Vitreous china wash hand basin, white, (flat back or angle back) of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, complete all as specified and as directed.
S &F in repairs Vitreous china urinals, bowl type flat back size 465 x 355x 265 mm whiten minimum with grating and union for discharge pipe , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, complete all as specified and as directed.
S&F PVC connection pipe 15 mm bore 450 mm long, complete all as specified and as directed.
S&F in repairs brass cromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and as directed.
Taking down rain water pipes inculding all fittings of any size and pattern, complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls,floor, etc, complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls, floor, etc, complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door, complete all as specified and directed.
S&F 110 mm bore PVC (SWR) Vent Cowl, complete all as specified and directed.
Supply & fix 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store, complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store, complete all as specified and directed.
Taking up or down 25 or 32 mm bore steel tubing and connections, including cleaning for Refixing or removal to store, complete all as specified and directed.
Supply and laying 20 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and directed.
Supply and laying 25 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and directed.
Supply and laying 32 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete, complete all as specified and directed.
S&F in repairs 15 mm bore angular stop valves cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore of pipe fixed , complete all as specified and directed.
S&F in repairs 15mm bore bib cock with wall flange copper alloy screwed down high pressure with crutch or butter fly handdle screwed both end for iron pipe, complete all as specified and directed.
S&F 15 mm bore pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.
S&F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed.
S&F in repairs cromimum plated helth faucet shower with CP flexible pipe up 15 mm bore (ABS Body) with 1 mtr long Easy Flex tube in chrome finish, complete all as specified and directed. Make : Code No. ALD-573 of Jaquar.
Removing complete existing treatment incl PCC pedding of roof surfaces by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and as directed.
M&L for brushing neat cement slurry with 03 Kg of cement per Sqm, complete all as specified and as directed.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under relevant item.
M&L 25 mm thick cement concrete (1:2:4 ) Type B0 (using 12.5 mm graded stone aggregate) as in roof, complete all as specified and as directed.
M&L APP based polymeric membrane minimum weighing 3kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application including coating the surface with water based bituminous primer blow bitumen of 85/25 or 90/15 at 1.2 Kg/Sqm both at bottom and top of the membrance and finally finished with one coat of bitumenous aluminium paint at 100 gm per sqm, complete all as specified and as directed.
Disconnecting of water tank exc 250 Ltrs but not exc 500 Ltrs Capacity existing tanks, setting aside (or lowering ) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position, complete all as specified and as directed.
M&L for providing cement concrete as in roof kerbs or mud stops, rounded or chamfered on edges,of min 75 mm thick of M20 grade using 12.5mm graded stone aggregate to be admixed with water resisting and crystalline water proofing admixture Sika® Control- 200 P (IN) @0.8% to 2% by weight of cement mixing at site and placed in position finished even and smooth with proper slope, On horizontal surface, including demolition of old PCC, complete all as specified and as directed. Note : WPC shall be measured and paid separately under relevant item.
Supply only Sika® Control- 200 P (IN)
M&L for protection plaster 15 mm thick in CM 1:4, admixed with Sika® Plastocrete Plus @100ml per 50kg bag cement including taking down old vertical wall plaster surface, Product requirements admixture: conforms to IS 2645, complete all as specified and as directed. Note : WPC shall be measured and paid separately under relevant item.
Supply only Sika® Plastocrete Plus
Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and even and smooth without using extra cement including mixing of water proofing compound wherever required for floors and sides of wall in sunken floors NOTE: Water proofing compound will be measured separately
M&L applying one coat of NITTO proof to sides and bottom of floors to sunken floors, complete all as specified and as directed.
M&L for plain cement concrete (1:5:10) Type E2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and as directed.
Dismantling water tanks and removing to store exc 500 Ltrs & not exc 1000 Ltrs, complete all as specified and directed.
S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed, complete all as specified and as directed.
S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed, complete all as specified and as directed.
Disconnecting existing tanks exc 250 Ltrs but n.exc 500 Ltrs Capacity, setting aside for repairs, cleaning etc and hoisting if required, reconnecting and refixing in positiion after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes, complete all as specified and as directed.
Disconnecting existing tanks exc 500 Ltrs but n.exc 1000 Ltrs Capacity, setting aside for repairs, cleaning etc and hoisting if required, reconnecting and refixing in positiion after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes, complete all as specified and as directed.
M&L for preparation of new plastered/putty surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered surface to preparatory to distempering , complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer, complete all as specified and directed.
M&L applying a coat of 1mm thick wall care putty over plaster surface to prepare the surface even and smooth as per manufacture instruction, complete all as specified and as directed.
M&L for Preparation old decorated plastered surfaces of wall and applying one coat of cement base paint, complete all as specified and directed.
M&L for preparation of old decorated plastered wall surface applying One coat of oil bound distemper on wall, complete all as specified and directed.
Preparation of new or previously untreated wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over one coat of pink primer , complete all as specified and directed.
Preparation of old painted wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.
Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of synthetic enamel paint, complete all as specified and directed.
Material & Labour for preparation of old wall surface applying one coat of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm, complete all as specified and directed.
RC Madan
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .