SMART PERIODICAL SERVICES IN ZONE B AT MIL STN PALAMPUR

M & L for complete removal of existing treatment on wall/roof projections including facia, cornices etc at any height by scrapping with mechanical sander(having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7"/9" to make free from dust, loose paint etc by skilled labour complete all as specified and directed.

M & L for water proof cement based putty @1kg (undiluted) per sqm of average thickness 2mm over the plastered /old prepared painted surface of wall and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface :- Step 1: Mix the putty powder by adding water as manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2: Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine/manually of putty application finishing the surface even and smooth in level without any undulations. Step 3: Allow 6-8 hrs time to dry the putty surface.

M & L for one coat of acrylic water based exterior grade primer @ 0.9litre(undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface for painting of subsequent coats complete all as specified and directed.

M & L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal/ Anti Algal properties in two coats not less than 1.79 litre(undiluted)/10 Sqm diluted with water as per manufacturer's instruction applied over primed surface with fully automatic airless spray machine of point application with a flow speed of minimum 1 litre per minute having a pressure of 3300PSI. Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed. Note :- 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement.

M & L for Preparation of old painted wooden surfaces of any description not otherwise described over 10 cms width or girth including preparation of surface and applying one coat of synthetic enamel paint, including cleaning surfaces such as removing all splashes, drops, dirt and leaving premises in a clean state complete all as specified and directed

M & L for Preparation of old painted steel surfaces of any description not otherwise described over 10 cms width or girth including preparation of surface and applying one coat of synthetic enamel paint, including cleaning surfaces such as removing all splashes, drops, dirt and leaving premises in a clean state complete all as specified and directed

M & L for water proofing of exterior walls,including completeremoval of existing plaster including raking out joints and applying two coats of Acrylic polymer modified high performance coating (Smartcare Ultra Block 2K). The treatment shall be done from ground level and providing 15mm thick cement plaster in CM 1:4 finished even and smooth complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surfaces, as on external surface such as chajja, parapet, finished even and fair, including taking down old plaster complete all as specified and directed.

M&L for 15 mm thick rendering in ready mix plaster external cement mortar on fair faces of brick or concrete surfaces, as on external surface such as chajja, parapet, finished even and fair, including taking down old plaster complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces, as on internal surface finished even and smooth without using extra cement, including taking down old plaster complete all as specified and directed.