PRESS NIT NO.03(2021-22)CWA (W and S)-I

Caustic Soda (NaOH) MS RL Preparation Tank : Size :- 2000 mm Dia x 2300 mm Height Main Hole :- 400 mm Suction :- 400mm MOC :- MS + Rubber Lined Capacity :- 10 M3 Type :- Cylindrical Thickness :- MS 5 mm, RL 3 mm Application :- 10% Caustic Solution Preparation Tank, Storage

Absorption Tower / Gas Exhauster / Scrubber Unit : Size :- 400 mm Dia x 1000 mm Height Blower Suction :- Top of Tower 150 mm PVC Side Glass :- 300 mm x 300 mm Chlorine Suction :- 150 mm PVC from Chlorine Toner Room Pauling Ring :- Packed Bed with PP Paul Rings Size 1 ½” for Caustic solution MOC :- PP + FRP 3mm PP Sheet with proper PP welding, 2 mm FRP Coating Pump Discharge Nozzle :- 50 mm Application :- For Scrub of Chlorine Gas in Caustic Solution

Caustic Re Circulating Pump : Type : Centrifugal, Head : 10 MWC , Capacity : 8 m3/Hr, Specific Gravity : 1.2 , Fluid : 20% NaOH , Casing : PP , Impeller : PP Shaft : EN-8 , Sealing Arrangement : Mech Seal, Motor Rating : 1HP pprox, 415VAC 3 Phase , Type of Motor : TEFC , Insulation : Class B , Protection : IP 55 , Speed : 2800 RPM , Application : Caustic Neutralization

Blower Type : Centrifugal , Impeller Blade : Made with 5 mm MS Sheet With Dynamic Balancing , Blower Body Size : Suction Size 150 mm x 150 mm , Motor MS Plate : 10mm Thick + 300 x 500 mm , MS Channel : 75 x 40 mm Head : 120 MMWC , Capacity : 1500 CFM , Speed : 1440 RPM , Casing : MS Frame , Type : Direct Driven , Motor Rating : 7.5 HP, 415 VAC, 3 Phase , Motor Type : TEFC , Speed : 1440 RPM

Blower Ducting Line : Size : 150 mm size ( 6”), MOC : PVC , Pressure : 4 Kg/Cm2

Damper Size : 90mm Dia , Location : Chlorine Room in Ducting , MOC : PVC

Ball Valve Size : 50 mm , 1 ½”, Temperature :up to 100 0C , M.O.C :PP , Pressure 10kg/cm2 , Body : 200 PSI , Seat : 150 PSI, End Connection :As per ANSI B 16.5, & as per BS 10 & DIN Std, Make of PP Valves:Parth / CPI /Orient

Check Valve Size : 50 mm, 1 ½” , Body : 150 PSI , Seat : 100 PSI , Temperature : 80 0C , Construction : Ball type design, Soft seated , End Connection : Flanged as per ANSI B 16.5, as per BS 10 , DIN Std , Ball Type : PP

Level Indicator with 25 mm 2 Nos PP Ball Valve Type : Borosilicate Glass Tube , Scale : Calibrated Scale, Casing : PP /SS , Ball Valves : 2 Nos , 25 mm

Pressure Gauge Type : Isolator , Range : 0 to 6 Kg/cm2 , Sensing Element : SS-316 , Process Connection: ½” BSP , Isolator MOC : ABS Grade I & PTFE Diaphragm, Make : H Guru , Application : Showing Pump Discharge Flow Ball Valve : 25mm for Pressure Gauge

Chlorine Leak Detector Range : 0 to 10 PPM Chlorine , Sensor : Electrochemical Type , Output : Single Sensor , Alarm : Audio/Visual , Type of Alarm : Audible by Hooter , Indication : Continuous Digital , Sensitivity/ Resopnse Time : Less Than 5 Sec , Power Supply : 220 VAC 50 HZ , Protection : IP 55 , Cable : 25 Mtrs Co Axial Cable with BNC , Mounting : Wall Mounting , Application : Auto Detect Chlorine

Re-Circulation Pump UPVC Piping and Fittings Size : 50 mm Suction and50 mm Discharge Schedule : 40 for Piping and 80 for Fittings Pressure : 10 Kg/Cm2 , Make : Astral / Prince , Length :- 3 Mtr of each pipe

Caustic Soda : 98% grade NaOH, PACL/MODI alkali make or 40% caustic lie in liquid form

Automation Control Panel Panel with internal Relays i.e. Services relays, converting relays, DC to AC, Volt meter, Amp. Meter, internal wiring\, signal lamps, change over switch, control switches. Application :- Auto Chlorine detect by chlorine leak detector than auto blower and pump running by automation. Also Manual adjustable Switch in Panel

Control Cables All necessary Cabling work

Erection, Commissioning & Civil Work Erection and Commission of above project including Supply, Erection, Commissioning and Testing, Transportation, Loading Unloading at site Storage at Site. All necessary Painting work and Cabling Work. From our panel to all equipments

S V Chemicals & Traders