4217 Co. On U.D. Construction of Shed for Swimming Pool at NEW MLA QUARTERS With Foundation, Steel structure, Brickwork, Door Window, Flooring etc at Sector-17, Gandhinagar.

1 Excavation for foundation upto 1.5 m depth including 747.00 Cmt 123.13 Rupees One

sorting out and stacking of useful materials and Hundred Twenty

disposing off the excavated stuff upto all lead.(A) Three and Paise

Loose or soft soil Thirteen Only

2 Excavation for foundation From Depth 1.50mt to 597.00 Cmt 136.30 Rupees One

3.0mt including sorting out and stacking of useful Hundred Thirty Six

materials and disposing off the excavated stuff upto all and Paise Thirty

lead.(A) Loose or soft soil Only

3 Excavation for foundation From Depth 3.0mt to 5.0mt 478.00 Cmt 182.94 Rupees One

including sorting out and stacking of useful materials Hundred Eighty

and disposing off the excavated stuff upto all lead.(A) Two and Paise

Dense or Hard soil Ninety Four Only

4 Extra for additional depth more than 5.0 m for 124.00 Cmt 205.12 Rupees Two

excavation for foundation including sorting out and Hundred Five and

stacking of useful materials and disposing off the Paise Twelve Only

excavated stuff upto all lead.(B) Dense or Hard soil

5 Demolition including stacking of serviceable materilas 51.00 Cmt 1110.75 Rupees One

and disposal of unserviceable materials with all lead Thousand One

and lift. (i) R.C.C. work Hundred Ten and

Paise Seventy Five

6 Demolition of Brick work and stone masonry including 28.00 Cmt 577.92 Rupees Five

stacking of serviceable materilas and disposal of Hundred Seventy

unserviceable materials with all lead and lift.(ii) In Seven and Paise

Cement Ninety Two Only

7 Demolition and disposal of unserviceable materials 29.00 Cmt 639.72 Rupees Six

with all lead and lift.(i) Plain concrete. Hundred Thirty

cu. Nine and Paise

Seventy Two Only

8 Dismentaling tiled of stone floors laid in mortar 240.00 Cmt 50.11 Rupees Fifty and

including stacking of serviceable materilas and Paise Eleven Only

disposal of unserviceable materials with all lead and

9 Filling available excavated Earth (Excluding Rock) in 1873.00 Cmt 136.92 Rupees One

trench Plinth side of foundation etc.in layer not Hundred Thirty Six

exceeding 20 cm in depth consolidation each and Paise Ninety

deposited layer by ramming and waterring etc. Two Only

coomplete.

10 Filling in Plinth with sand under floors including 54.00 Cmt 481.70 Rupees Four

watering, ramming consolidating and dressing etc. Hundred Eighty

complete. One and Paise

11 Applying general insecticide pest control treatment to 119.00 Smt 91.63 Seventy

Rupees OnlyOne

Ninety

floors, cupboards etc including labour material etc. and Paise Sixty

complete. Using Imidacloprid 30.5 SC as per IS 6313 Three Only

Part-II (0.075% concentration by mass) is

recommended 10.5 ml chemical dilluted with 5 liters

of water application0.5 liter chemical/Smt of surface

is recommended as per I.S

Description of Item Quantity Unit Rate In figures Amount

12 Providing and laying in position Ready Mixed M-150 37.00 Cmt 4321.79 Rupees Four

grade concrete for reinforced cement concrete work in Thousand Three

Foundations & Plinth, using cement content as per Hundred Twenty

approved Design Mix manufactured in fully automatic One and Paise

batching plant established on site and transported to Seventy Nine Only

site of work in transit mixer having continuous

agitated mixer, manufactured as per mix design of

specified grade for reinforced cement concrete work

including pumping of R.M.C. from transit mixer to site

of laying, excluding the cost of reinforcement and

including cost of centering. shuttering, formwork

finishing and admixtures in recommended

proportions as per IS : 9103 to accelerate/ retard

setting of concrete, improve workability without

impairing strength and durability as per direction of

the Engineer -In - Charge. Without Fly Ash (Min

cement level as per latest IS 456 shall be maintained)

For All Floor Level

13 Providing and laying in position Ready Mixed M-200 36.00 Cmt 4321.79 Rupees Four

grade concrete using cement content as per approved Thousand Three

Design Mix manufactured in fully automatic batching Hundred Twenty

plant established on site and transported to site of One and Paise

work in transit mixer having continuous agitated Seventy Nine Only

mixer, manufactured as per mix design of specified

grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying,

excluding the cost of reinforcement and including cost

of centering. shuttering, formwork finishing and

admixtures in recommended proportions as per IS :

9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and

durability as per direction of the Engineer -In - Charge.

Without Fly Ash (Min cement level as per latest IS

shall be maintained) For all R.C.C. memebers at all

floor level

14 Providing and laying in position Ready Mixed M-250 79.41 Cmt 6878.95 Rupees Six

grade concrete using cement content as per approved Thousand Eight

Design Mix manufactured in fully automatic batching Hundred Seventy

plant established on site and transported to site of Eight and Paise

work in transit mixer having continuous agitated Ninety Five Only

mixer, manufactured as per mix design of specified

grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying,

excluding the cost of reinforcement and including cost

of centering. shuttering, formwork finishing and

admixtures in recommended proportions as per IS :

9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and

durability as per direction of the Engineer -In - Charge.

Without Fly Ash (Min cement level as per latest IS

shall be maintained) for all RCC elements like

foundation, slabs, beams, Plinth beams, coping,

columns, walls chhajja, and stair cases, lintel etc at all

floor level from below Plinth and above Plinth level.

15 Providing cement vata (10cm. x 10 cm. size) quarter 48.60 Rmt 24.28 Rupees Twenty

round in cement mortar 1:1 including neat cement Four and Paise

finishing, watering etc. complete. Twenty Eight Only

16 Disposing available excavated earth stuff to other 73.00 Cmt 129.28 Rupees One

location or as per instruction of directed engineer in Hundred Twenty

charge. Up to All lead.No extra payment shall be made Nine and Paise

for royalty and other government charges. Twenty Eight Only

17 Providing and laying TMT Bar Fe 550D reinforcement 26100.00 kg 94.99 Rupees Ninety

for RCC work including bending, binding and placing Four and Paise

in position complete for all floors. Ninety Nine Only

Description of Item Quantity Unit Rate In figures Amount

18 Brick work using common burnt clay building bricks 6.39 Cmt 4214.09 Rupees Four

having crushing strength not less than 35 kg./Sq.Cm. Thousand Two

in foundation and plinth in Cement Mortar 1:6 (1- Hundred Fourteen

Cement : 6 -fine sand) (B) Conventional and Paise Nine

19 Brick work using common burnt clay conventional 46.03 Cmt 4502.81 Rupees Four

building bricks having crushing strength not less than Thousand Five

35 Kg/sqcm. in foundation and Plinth and in super Hundred Two and

structure in cement mortar 1:6 ( 1 cement : 6 fine Paise Eighty One

sand ) including curing etc. complete, For all floors as Only

directed by architect or engineer in-charge.

20 Half brick masonary in common burnt clay 225.02 Smt 685.79 Rupees Six

conventional building bricks having crushing Hundred Eighty

strength not less than 35 Kg/Sq.cm. in C.M. 1:4 ( 1 Five and Paise

cement : 4 coarse sand ) including curing etc. Seventy Nine Only

complete , For all floors as directed by architect or

engineer in-charge.

21 Providing 10 mm. thick Mala cement plaster in single 80.94 Smt 161.36 Rupees One

coat on brick/concrete wall ceiling for interior Hundred Sixty One

plastering finished with Mala Trovel including curing and Paise Thirty

etc. complete. In Cement mortar 1:3(1 cement : 3 fine Six Only

sand) For all floors as directed by architect or

engineer in-charge.

22 Providing 15mm thick cement plaster in single coat on 301.00 Smt 185.41 Rupees One

Rough (Similar)side of single or half brick walls for Hundred Eighty

interior plastering upto floor two level and finished Five and Paise

even and smooth in (i) Cement mortar 1:3 (1-cement:3- Forty One Only

23 Providing 20 mm thick double coat mala cement 369.00 Smt 286.10 Rupees Two

plaster on interior or exterier brick / concrete work Hundred Eighty Six

for plastering comprising of base coat of 12 mm thick and Paise Ten Only

cement plaster in cement mortar (1 Cement : 4 coarse

sand) in rough finishing and 8 mm thick top coat of

cement mortar 1:2 (1 Cement : 2 Coarse sand) finished

with trovel including scaffolding curing etc. complete.

for all Floor

24 Providing 15 mm thick water proof cement plaster 167.00 Smt 246.47 Rupees Two

using water proofing powder 1Kg/1bag of cement for Hundred Forty Six

all floors on brick / concrete wall work using water and Paise Forty

proofing materials in C M 1: 3 ( 1 cement 3 coasrse Seven Only

sand) including finishing with a flooting coat of neat

cement slurry etc complete For all floors as directed

by architect or engineer in-charge.

25 Providing and applying 2-3 mm Thick Exterior Texture 670.00 Smt 279.77 Rupees Two

Synthetic plaster made of copolymer binders and fine Hundred Seventy

natural marble powders of Earthen/Coral/Spectrum Nine and Paise

as per the required design and pattern approved by Seventy Seven

the architect / Engineer in-charge on 1 coat of base Only

primer of Earthen/Coral/Spectrum (to be carried out

on the single/double coat smooth male plaster)

26 Finishing wall with 100% weather proof acrylic 369.00 Smt 150.88 Rupees One

exterior emulsion water repellant paint on wall Hundred Fifty and

surface (two coats) and one coat of primer to give an Paise Eighty Eight

required shape even shade after thoroughly brushing Only

the surface to remove all dirt, and remains of loose

powdered materials.etc complete, For all floors as

directed by architect or engineer in-charge.

27 Wall painting (two coats) including one coats special 382.00 Smt 123.78 Rupees One

effects (royale play) with plastic emulsion paint of Hundred Twenty

approved brand and manufacture on new wall surface Three and Paise

to give an even shade including two coats of lapy ( Seventy Eight Only

putty) & two coats of primer of approved brand

including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand

papered smooth For all floors as directed by architect

or engineer in-charge.

Description of Item Quantity Unit Rate In figures Amount

28 Providing and laying Pool Tiles deep or orient Blue, 60.00 Smt 2798.59 Rupees Two

24.7cm x12.2cm and 8mm thick as per direction of Thousand Seven

engineer in charge, on a bed of polymer modified Hundred Ninety

cement based tile adhesive finished with flush Eight and Paise

pointing in white cement and as aproved colour,shed Fifty Nine Only

and size by directed by architect or engineer in-

charge. No extra payment shall be made for variation

in bedding thickness as per site conditions. This item

shall be executed as per site condition and as per

instruction of engineer incharge.

29 Providing and laying Anti Slip TYPE POOL TILES 120.00 Nos 359.16 Rupees Three

FLOORING, WITH APPROVED SHADE COLOUR & Hundred Fifty Nine

SHADE / DETAILS AS APPROVED BY ARCHITECT OF and Paise Sixteen

THE SAME MATERIAL on a bed of polymer modified Only

cement based tile adhesive finished with flush

pointing in white cement and as aproved colour,shed

and size by directed by architect or engineer in-

charge. No extra payment shall be made for variation

in bedding thickness as per site conditions. This item

shall be executed as per site condition and as per

instruction of engineer incharge.

30 Providing and laying Finger grip with safety marking 120.00 Nos 924.76 Rupees Nine

TYPE POOL TILES FLOORING, WITH APPROVED Hundred Twenty

SHADE COLOUR & SHADE / DETAILS AS APPROVED Four and Paise

BY ARCHITECT OF THE SAME MATERIAL laid on a bed Seventy Six Only

of polymer-modified cement-based tile adhesive,

finished with flush pointing in white cement, complete

in approved colour, shade, and size, as approved by

the Architect/Engineer-in-Charge. The rate shall

include all cutting, wastage, labour, materials, and

incidentals required to complete the work. No extra

payment shall be made for variation in bedding

thickness as per site conditions.This item shall be

executed as per site condition and as per instruction of

engineer incharge.

31 Providing and laying 600 × 600 mm and 8-9mm thick 149.57 Smt 1467.72 Rupees One

Vitrified tiles in flooring in required thickness as per Thousand Four

direction of engineer in charge,over 20 mm (average) Hundred Sixty

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) Seven and Paise

on new surface or fixing on existing flooring by Seventy Two Only

adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc.

No extra payment shall be made for variation in

bedding thickness as per site conditions.

32 Providing and laying 15 mm thick full-body vitrified 28.00 Smt 3273.31 Rupees Three

tiles of approved make, shade, size and finish, machine Thousand Two

cut with rectified edges, laid on 10 mm thick polymer Hundred Seventy

modified cement-based tile adhesive over prepared Three and Paise

surface, with joints filled, including cutting, finishing, Thirty One Only

cleaning and all necessary materials and labour

complete, as directed by the Architect or Engineer-in-

Charge. For all floor.

Description of Item Quantity Unit Rate In figures Amount

33 Providing and fixing 35 mm thick single-leaf flush door 2.10 Smt 6971.18 Rupees Six

shutter with solid core construction, conforming to IS: Thousand Nine

2202 and manufactured by an ISI-approved Hundred Seventy

manufacturer, suitable for heavy-duty use. The shutter One and Paise

shall be provided with 6 mm thick teakwood Eighteen Only

lipping/batten on all edges and 1.0 mm thick

decorative laminate on both faces, complete with

Nos. of 150 mm high heavy-duty stainless steel butt

hinges, stainless steel pull handles 150 mm to 200 mm

long on both sides, approved locking arrangement,

and all necessary fixtures, fittings, fasteners and

hardware. The item shall be complete in all respects,

including installation, as directed by the Engineer-in-

34 Providing And Fixing Two Track Sliding Window In 25.92 Smt 7357.56 Rupees Seven

Slim Section With Powder Coating Colour Section Thousand Three

Frame Main Outer Size Horizontal Tw0 Track Section Hundred Fifty

(80.7 X 47.1 X 1.40mm) (@ Wt. Of 1.61 Kg/Mt), Seven and Paise

Verticle Two Track Section: 84.0 X 32.6 X 1.40mm (@ Fifty Six Only

Wt. 1.04 Kg/Mt), Vertical Shutter Section:58.5 X 31.3 X

1.4 Mm . (@ Wt. 0.88 Kg/Mt) With Sliding Shutters Of

Verticle Shutter , 37.65 X 23 X 1.4 To 3 Mm @ Wt.

Kg/ Mt, Horizontal Shutter ,65.00 X 28.00 X 1.40 Mm @

Wt. 0.91 Kg/Mt With 5 Mm Thick Reflective

Toughened Glass And One Sliding Shutter With

Including Rubber Gastet And Powder Coated

Aluminium Fitting And Fixtures And Silicon Sealant

Glass Fixing To Frame As Per Details Etc. Complted As

Per Make List. Including All Lead And Lift For All

Floors. Including Drilling Of Holes For Fixing

Hardware And Drainage Of Water Air Lock Strip And

Finishing Joints With Silicon Sealant Shall Be

Approved By Architect Or Engineer In Charge

35 Providing & fixing M.S. grills of required pattern to 777.60 Kg 106.23 Rupees One

frames of windows, ventilation or any other place etc. Hundred Six and

with M.S. flats of required size and 12mm rod at Paise Twenty

required spacing & frame around, square or round Three Only

bars with round headed bolts & nuts or by screws as

directed by engineer in charge for all floors(A)Plain

36 Steel work welded in built up sections, framed work 10062.72 Kg 88.38 Rupees Eighty

including cutting hoisting fixing in position in beams Eight and Paise

and joists, channels, angles, tees, flats with connecting Thirty Eight Only

plates or angle cleats as in main & cross beamship &

jack rafters, purlins connected to common rafters and

like for all M.S. structures other than grills. Structural

steel shall conform to a minimum yield strength (Fy)

of 310 MPa.

37 Painting two coats (including priming coat) on new 668.43 Smt 128.62 Rupees One

steel and other metal surface with enamel paint, Hundred Twenty

brushing interior to give an even shade including Eight and Paise

cleaning the surface of all dirt, dust and other foreign Sixty Two Only

38 Providing and fixing to wall ceiling and floors 10.0 Kg. 160.00 Rmt 339.05 Rupees Three

F/Cm2 working pressure I.S.I. mark P.V.C. pipe of 110 Hundred Thirty

mm dia low density of make as approved by Engineer Nine and Paise

In Charge complete with special flange compression Five Only

type fitting wall clamps etc. including making good the

wall ceiling and floor and trenches.as directed by

architect or engineer in-charge.

39 Supplying and Fixing Z patti type G.I.Brackets for 56.00 Rmt 301.99 Rupees Three

SWR/RWR/Water supply Plumbing (down take) pipe Hundred One and

with GI Clamp and Nacessary Fastenrs . Paise Ninety Nine

Description of Item Quantity Unit Rate In figures Amount

40 Providing and fixing S.W. gully trap with C.I. grating 8.00 No 1246.92 Rupees One

brick masonry chamber and water tight C.I. cover with Thousand Two

frame of 300mm x 300mm size (inside) with standard Hundred Forty Six

weight.(i) Square mouth traps.(B) 150mm x 100mm and Paise Ninety

size P or S type Two Only

41 Providing and laying in trenches 10.0 Kg. F/Cm2 80.00 Rmt 959.08 Rupees Nine

working pressure I.S.I. mark PVC SWR pipe of 160 mm Hundred Fifty Nine

dia low density pipe of make as approved by and Paise Eight

Engineer In Charge including fitting etc completein Only

42 Providing and laying in trenches 10.0 Kg. F/Cm2 120.00 Rmt 1557.05 Rupees One

working pressure I.S.I. mark PVC SWR pipe of 250 mm Thousand Five

dia low density pipe of make as approved by Engineer Hundred Fifty

In Charge including fitting etc completein ground. Seven and Paise

43 Constructig brick masonary chamber of 500 mm x 700 12.00 No 3597.27 Rupees Three

mm inside dimension and depth upto 0.45 m for Thousand Five

under ground CI inspection chamber and bends with Hundred Ninety

bricks having crushing strength not less than 35 Seven and Paise

Kg/Smt. in CM. 1:5 precast fibre reinforced concrete Twenty Seven Only

frame & cover of square frame of approx

800x800x150mm & round cover 75mm thick, RCC top

slab CC 1:2:4 ( 1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size ) foundation

concrete 1:5:10 inside plaster 15 mm thick with

cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

44 Extra over items Chamber for every additional depth 12.00 No 264.86 Rupees Two

of 0.1 M. of part thereof beyond 450 mm depth for Hundred Sixty

Brick masonry chamber. (ii) for 500 mm x 700 mm Four and Paise

size. Eighty Six Only

45 Providing and laying in position rebar as specified in 308.00 No. 256.69 Rupees Two

true line & level including drilling adequate hole, Hundred Fifty Six

cleaning the same, grouting with HILTI, HY - 200 rebar and Paise Sixty

system as per manufacturers specifications strictly in Nine Only

accordance with structural details having minimum

depth of embedment 350mm , etc complete For all

floors (a) 8 to 20 mm dia

46 Providing and fixing GI chicken mesh jali 12.5 mm x 24 47.00 Smt 82.64 Rupees Eighty Two

swg at R.C.C. masonry joints at any height with all and Paise Sixty

labour & material etc. complete. Four Only

47 Providing and fixing pre-cast Rubber Dye / steel Dye 37.50 Smt 706.90 Rupees Seven

inter locking concrete block 60mm thick with grade of Hundred Six and

concrete M300 pnumatic compressed / vibrated Paise Ninety Only

mechanically and as per approved design Confirming

to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-2018 etc.

48 Providing and fixing pre-cast concrete kerb stone of 50.00 Rmt. 374.92 Rupees Three

gray cement based concrete block 30cm length,30cm Hundred Seventy

height and 15cm thick of M250 grade concret as per Four and Paise

approved design and including excavation for fixing in Ninety Two Only

proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete

Description of Item Quantity Unit Rate In figures Amount

49 Providing and fixing of Ridge flashing for roof panel 267.76 Smt 867.39 Rupees Eight

shall be made out of minimum 0.5 mm thick pre coated Hundred Sixty

GI sheet . The Precoated sheet shall be of minimum Seven and Paise

240 mpa steel grade confirming to IS 14246:1995 and Thirty Nine Only

shall have zinc coating of minimum 120 gsm as per

IS:277:1992 , 5-7 microns epoxy primer on both side

of the sheet and polyester top coat 15-18 micron. The

PPGI Sheet shall have plastic protective guard film of

minimum 25 microns to avoid scratches during

transportation. The ridge shall be fixed to the steel

members by pop rivet or self drilling/self stitching

fastners @ maximum 450 mm c/c along length of

capping/flashing etc complete .

50 Providing & Filling 3 mm wide Epoxy Grouting in 1080.00 Rmt 62.54 Rupees Sixty Two

Vitrified Flooring & Wall Dedo etc. Complete. and Paise Fifty

51 Providing, fabricating, supplying, and fixing FRP 39.00 Rmt 2903.75 Rupees Two

Overflow Drain Cover of 300 mm width (0.30 m) and Thousand Nine

length as per approved drawings, manufactured from Hundred Three

high-strength Fiberglass Reinforced Plastic (FRP) with and Paise Seventy

anti-slip surface finish, UV-resistant, corrosion- Five Only

resistant, and suitable for swimming pool applications,

complete with FRP supporting system (where

specified), edge preparation, cutting, fitting, fixing with

stainless steel fasteners, anchors, and all necessary

hardware, including alignment, installation, testing,

and finishing, complete in all respects as per the

approved drawings, specifications, manufacturer's

recommendations, and the directions of the Engineer-

in-Charge.

52 Providing and applying Sikadur®-32 LP or approved 25.00 Kg 871.13 Rupees Eight

equivalent, a two-component, solvent-free, moisture- Hundred Seventy

tolerant epoxy structural bonding agent, for bonding One and Paise

new concrete to existing concrete, including surface Thirteen Only

preparation, mixing, application, and all materials,

labour, tools, and equipment required for complete

execution as per the manufacturer's specifications and

as directed by the Engineer-in-Charge. The make and

product shall be submitted for approval and confirmed

by the Engineer-in-Charge prior to supply and

application.

53 Providing and fixing Invisible Grill for full window 82.08 Smt. 1277.65 Rupees One

with single horizontal line with 2mm SS 316 7x7 Nano Thousand Two

technology wire having 1.5 inch center to center Hundred Seventy

spacing vertically for all floors. 3-4mm Alluminium Seven and Paise

base track shall be provided with SS 304 bolt. Sixty Five Only

Anchoring shall be done by 8x100mm hilti

anchorfastners. CNC wire lock connector shall be

provided to lock all vertical wires to centred

horizontal wire. For Side wall connectors shall be

provided. The work shall be done with proper safety

measures for all floors as directed by Engineer in

Description of Item Quantity Unit Rate In figures Amount

54 Providing and fixing 24-inch diameter turbo 4.00 No. 3252.20 Rupees Three

ventilators along with 2 ft × 14 ft skylights on the top Thousand Two

of the self-supported steel roof at the designated Hundred Fifty Two

locations, as per the approved design and drawings. and Paise Twenty

The turbo ventilators shall be manufactured from high- Only

grade aluminium of Everflow or equivalent approved

make. The ventilators shall be installed using

polycarbonate housings of a reputed make and sealed

with GE, Wacker, or equivalent approved sealants to

ensure complete watertight sealing at all joints with

the roof. The rate shall be inclusive of making the

installation completely waterproof, and shall include

all materials, labour, tools and tackles, fabrication,

cutting, wastage, fixing accessories, necessary civil

works, and all other incidental items required to

completeThe rate includes all materials, labour, tools

and tackles, incidental works, and everything

necessary to complete the work in all respects, as

directed by the Engineer-in-Charge.

55 Point wiring for Light / Bell with 2-1.5 sq.mm & 30.00 pts 582.77 Rupees Five

earth wire of 1.5 sq.mm (Green) both are of ISI marked Hundred Eighty

1.1 KV grade FRLS PVC insulated multi strand copper Two and Paise

wires up to 10 mtr length , in below type of pipe Seventy Seven

erected with 6A Modular type switch / bell push & Only

accessories and earth continuity of following type,

erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector

as directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete Cat. III

56 Point wiring for on board Looped Plug with 6A 4.00 pts 309.06 Rupees Three

Modular type switch & 5 pin socket erected on PVC / Hundred Nine and

Metallic/Wooden box, single mounting base frame Paise Six Only

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories Cat. III

57 Providing following type of Modular Type Accessories 6.00 Nos. 151.50 Rupees One

mounted with PVC / metallic/Wooden box, single Hundred Fifty One

mounting base frame covered with textured / and Paise Fifty

metallic/white front plate , modules erected with Only

necessary connections as per site situation directed by

Engineer In charge. (1)One No. SP 6 Amp. Cat. III

58 Providing following type of Modular Type Accessories 6.00 Nos. 151.50 Rupees One

mounted with PVC / metallic/Wooden box, single Hundred Fifty One

mounting base frame covered with textured / and Paise Fifty

metallic/white front plate , modules erected with Only

necessary connections as per site situation directed by

Engineer In charge. (2) One No 5 pin plug Cat. III

59 Providing following type of Modular Type Accessories 4.00 Nos. 180.79 Rupees One

mounted with PVC / metallic/Wooden box, single Hundred Eighty

mounting base frame covered with textured / and Paise Seventy

metallic/white front plate , modules erected with Nine Only

necessary connections as per site situation directed by

Engineer In charge. (9) 16 Amp. SP one way switch

60 Providing following type of Modular Type Accessories 4.00 Nos. 199.98 Rupees One

mounted with PVC / metallic/Wooden box, single Hundred Ninety

mounting base frame covered with textured / Nine and Paise

metallic/white front plate , modules erected with Ninety Eight Only

necessary connections as per site situation directed by

Engineer In charge. (10) 6/16Amp. Universal socket

Description of Item Quantity Unit Rate In figures Amount

61 Providing and erecting Mains with 1.1 KV grade FRLS 50.00 mtrs 78.78 Rupees Seventy

PVC insulated ISI marked stranded Copper conductor Eight and Paise

wire in following type of pipe to be erected concealed Seventy Eight Only

in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

62 Providing and erecting Mains with 1.1 KV grade FRLS 180.00 mtrs 104.03 Rupees One

PVC insulated ISI marked stranded Copper conductor Hundred Four and

wire in following type of pipe to be erected concealed Paise Three Only

in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. Mm

63 Providing and erecting Mains with 1.1 KV grade FRLS 50.00 mtrs 184.83 Rupees One

PVC insulated ISI marked stranded Copper conductor Hundred Eighty

wire in following type of pipe to be erected in / on wall Four and Paise

/ ceiling with 2.5 sq. mm copper conductor FRLS PVC Eighty Three Only

insulated stranded wire of green colour for earth

continuity of following size (A) With medium class

Rigid PVC pipe and accessories (b) 2 wire 6 sq. mm

64 Supplying and erecting LED indoor fittings with LEDs 10.00 nos 535.30 Rupees Five

of wattage 0.2 Watt to 0.5 Watt assembled on single Hundred Thirty

MCPCB, with housing used as a heat sink shall be Five and Paise

made of thick sheet Steel conforming to IS: 513/CRCA/ Thirty Only

aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

(A) Tube Light with integral driver (v) 36-40 Watts,

Surge-2 kV, IP-20, conventional 4 feet Cat-lll

65 Supplying and erecting LED street light / Flood light 10.00 nos 6177.16 Rupees Six

fittings with High power White LEDs wattage of 3 Watt Thousand One

and above assembled on single MCPCB, efficiency Hundred Seventy

more than 130 lm/w and corrosion free High pressure Seven and Paise

die cast aluminum housing with smooth finish powder Sixteen Only

coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required LM-79 &

LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The

between the ranges shown.) (B) Flood Light (IP-65),

Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (iv)

90 - 119 watts Cat-lll

66 Providing and erecting Miniature circuit breaker 8.00 nos 123.22 Rupees One

single pole 6A to 25A suitable to operate on 240 V A.C. Hundred Twenty

system and having breaking capacity 10 KA to be Three and Paise

erected in existing box. confirming to IS 8828/1996 Twenty Two Only

with ISI Mark Cat.III

Description of Item Quantity Unit Rate In figures Amount

67 Providing & erecting 415 V MCB Four Pole for Motor 1.00 Nos 736.29 Rupees Seven

& Inductive Load (C Curve) having 10KA breaking Hundred Thirty Six

capacity & confirms to IS :8828 in existing box having and Paise Twenty

following capacity (b)40 Amp. Cat.III Nine Only

68 Providing and erecting Sheet Steel powder coated MCB 1.00 nos 1492.78 Rupees One

distribution board - flush / surface mounted fitted Thousand Four

with busbar, neutral link, earth bar and DIN rail, Hundred Ninety

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without Two and Paise

MCB to house appropriate nos. of MCBs.(The DBs Seventy Eight Only

should be used of same company of MCB to be used)

suitable for (A) single phase incoming and horizontal

single phase outgoing (b) sheet steel double door (IP-

43) (iv)12 way

69 Providing and erecting Approved make RCCBs 1.00 nos 2458.34 Rupees Two

conforming to IS: 12640 and having sensitivity of 30 Thousand Four

mA and Short Circuit withstand capacity of 10 KA and Hundred Fifty

suitable for operation on single phase 240 V,50Hz. Eight and Paise

having characteristic of quick action & tripping with all Thirty Four Only

advance feature & do not incorporate any electronic

component. for following Max. rating erected as

directed (ii) 40Amps. DP Cat. III

70 Providing and erecting HOT deep Galvanised iron 2.00 kg 77.77 Rupees Seventy

strip/wire 4.064mm to 1.626mm. Seven and Paise

Seventy Seven

71 Supplying & erecting earth pit of minimum bore 1.00 nos 4591.46 Rupees Four

dia.150mm size approved make Earthing Electrode Thousand Five

consisting Pipe-in-Pipe Technology as per IS 3043- Hundred Ninety

1987 made of corrosion free hot dipped G.I.Pipes One and Paise

having Outer pipe dia of 50mm having 80-200 Micron Forty Six Only

galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly

conductive compound with high charge dissipation

suitable for following type of applications with

chamber and heavy duty cover. (A)(approved make

OEM has to submit test certificate including value of

earth resistance of installation duly stamped and

signed by agency and officer Incharge has to ensure

the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:-

ohm / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. (a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

72 Supplying & erecting approved make low noise 10.00 nos 1703.87 Rupees One

decorative exhaust fan having square frame ABS body Thousand Seven

with inbuilt lowers & square frame. 250mm with Hundred Three

1350 RPM Cat.II and Paise Eighty

Seven Only

Total Rs.

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of the estimated rate

mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

Description of Item Quantity Unit Rate In figures Amount

Statement of Recovery of "Credit of Dismentaled Material"

Description of Item Quantity Unit Rate In Amount

No In Words

73 Demolition & Credit value of Existing Old Residnential 1.00 Block 54329.00 Rupees Fifty Four

Blocks of any category having combination up to 14 Thousand Three

units at any sectors of Gandhinagar including civil Hundred Twenty

items and disposal of servicable and unservicable Nine Only

materials with all lead and lift and all tools,

machinaries, equipments and plants including

cleaning the site of all debris and rubbis and levelleing

the ground as directed by engineer in charge.

Total Rs.

1 The credit of dismantled materials of existing blocks to be demolished on the site shall be recovered from the running bill

of the contractor as mentioned in the above recovery statement. In case of variation in the type of blocks to be demolished,

other than those mentioned above, the credit of dismantled material shall be recovered according to the necessary

approval of the competent authority as per the latest government rules.

2 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which

no extra payment shall be made.

3 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

4 GTS and Income tax TDS will be deducted at a source while making payments of bills

5 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design

the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in

all the tender.

Deputy Executive Engineer Executive Engineer Executive Engineer

Capital Project Sub Division:03 Capital Project Division No 1 C.P. Elect. Division

Gandhinagar Gandhinagar Gandhinagar