20JAN202201-Development of Various park (Vishnu Garden Shri Nagar Colony Gopal Nagar, Gulab Park Old Sabzi Mandi in ward no. 02

Amount

-(SHOULDER WHEEL) Fabricated with main post 114 mm & 3 mm thick, Lock nut fastners -Main Bearing should be 6206zz, 6205zz not less than 6203zz, Handle and Connecting pipe shall be 60mm and 32mm respectively. Pipes should be pure polyester powder coating and seat solid MS Sheet powder coating.

-Supply and Fixing of Precast Cement RCC Chair Benches with Back Rest Manufactured using M-30 Grade Gray Cement Concrete

-(TWISTER STEPPER) Fabricated with main post 114 mm & 3 mm thick, Lock nut fastners -Main Bearing should be 6206zz, 6205zz not less than 6203zz, Handle and Connecting pipe shall be 60mm and 32mm respectively. Pipes should be pure polyester powder coating and seat solid MS Sheet powder coating

-(LEG PRESS) Fabricated with main post 114 mm & 3 mm thick, Lock nut fastners -Main Bearing should be 6206zz, 6205zz not less than 6203zz, Handle and Connecting pipe shall be 60mm and 32mm respectively. Pipes should be pure polyester powder coating and seat solid MS Sheet powder coating.

-(DOUBLE CHEST PRESS) Fabricated with main post 114 mm & 3 mm thick, Lock nut fastners -Main Bearing should be 6206zz, 6205zz not less than 6203zz, Handle and Connecting pipe shall be 60mm and 32mm respectively. Pipes should be pure polyester powder coating and seat solid MS Sheet powder coating.

-(SINGLE PULL DOWN) Fabricated with main post 114 mm & 3 mm thick, Lock nut fastners -Main Bearing should be 6206zz, 6205zz not less than 6203zz, Handle and Connecting pipe shall be 60mm and 32mm respectively. Pipes should be pure polyester powder coating and seat solid MS Sheet powder coating.

-(HORSE RIDER) Fabricated with main post 114 mm & 3 mm thick, Lock nut fastners -Main Bearing should be 6206zz, 6205zz not less than 6203zz, Handle and Connecting pipe shall be 60mm and 32mm respectively. Pipes should be pure polyester powder coating and seat solid MS Sheet powder coating.

-6.1.2 : 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 20 mm nominal size)

-Carriage of Earthwork (Earthwork filling) including Loading and unloading (Lead upto 8 km )

-7.21.1 : Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement: 4 coarse sand)

-13.27 Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

-6.1.1 Providing and laying in position cement concrete of specified 4451 grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: Unit 6.1.1 1 : 1 ½: 3 ( 1 Cement: 1 ½ coarse sand (zone-Ill) : 3 cum graded stone aggregate 20 mm nominal size)

-6.39 Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1 :3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 6.39.1 1:1½ :3 (1 Cement: 1½ coarse sand(zone-111) : 3 cum graded stone aggregate 20 mm nominal size).

-(CHEST PRESS) Fabricated with main post 114 mm & 3 mm thick, Lock nut fastners -Main Bearing should be 6206zz, 6205zz not less than 6203zz, Handle and Connecting pipe shall be 60mm and 32mm respectively. Pipes should be pure polyester powder coating and seat solid MS Sheet powder coating.

-nishing walls with Acrylic Smooth exterior paint of required shade :11.95.1 New work (Two or more coat applied @ 1.67 litre/1 O sqm over sqm and including priming coat of exterior primer applied @ 2.20kg/10 sqm)

-11.58 Providing and applying two coats white cement based putty of approved sqm brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete

-(PULL DOWN DOUBLE) Fabricated with main post 114 mm & 3 mm thick, Lock nut fastners -Main Bearing should be 6206zz, 6205zz not less than 6203zz, Handle and Connecting pipe shall be 60mm and 32mm respectively. Pipes should be pure polyester powder coating and seat solid MS Sheet powder coating.

-(ROWER) Fabricated with main post 114 mm & 3 mm thick, Lock nut fastners -Main Bearing should be 6206zz, 6205zz not less than 6203zz, Handle and Connecting pipe shall be 60mm and 32mm respectively. Pipes should be pure polyester powder coating and seat solid MS Sheet powder coating.

-Providing and fixing pre coated galvanised steel sheet roofing accessories 0.50 mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade using self drilling/ self tapping screws complete tile profile type kamdhenu make.

-10.100.2 : Cement Concrete 1:8:16 with stone aggregate 40 mm size in foundation and plinth.

-11.5.3 : 12 mm cement plaster of mix : 1 :4 (1 cement: 4 fine sand)

-4.12 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas 87 (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge