REPAIR AND MANTENAANCE OF ELECTRIC FENCING AT SAUW BLDG AND CONNECTED MISC WORK AT INS CIRCAR, INS VIRBAHU, INS SATVAHANA AND CERTAIN POCKETS OF NAVAL DOCKYARD AREA UNDER AGE E/M I OF GE(U-I) VISAKHAPTNAM

Amount

Supply and replace MCCB 4 pole, 415 V, adjustable type 630 Amps with breaking capacity 50 KA including necessary modification in the panel complete all as specified and as directed. Make: GE/L&T/Havells/Indoasian

Supply and replace MCCB 4 pole, 415 V, adjustable type 400 Amps with breaking capacity 35 KA including necessary modification in the panel complete all as specified and as directed. Make: GE/L&T/Havells/Indoasian

Supply and replace MCCB 4 pole, 415 V, adjustable type 250 Amps with breaking capacity 35 KA including necessary modification in the panel complete all as specified and as directed. Make: GE/L&T/Havells/Indoasian

Supply and replace MCCB 4 pole, 415 V, adjustable type 200 Amps with breaking capacity 35 KA including necessary modification in the panel complete all as specified and as directed. Make: GE/L&T/Havells/Indoasian

Supply and replace MCCB 4 pole, 415 V, adjustable type 160 Amps with breaking capacity 25 KA including necessary modification in the panel complete all as specified and as directed. Make: GE/L&T/Havells/Indoasian

Supply and replace MCCB 4 pole, 415 V, adjustable type 63 to 100 Amps with breaking capacity 25 KA including necessary modification in the panel complete all as specified and as directed. Make: GE/L&T/Havells/Indoasian

Supply and install ON LOAD change over switch 415V 4 pole of capacity 630 Amps in open execution type fixing in existing panel if required then including necessary modification in the panel and including dismanlting old one complete all as specified and as directed. Make: GE/L&T/Havells/Indoasian

Supply and install ON LOAD change over switch 415V 4 pole of capacity 400 Amps in open execution type fixing in existing panel if required then including necessary modification in the panel and incl dismanlting old one complete all as specified and as directed. Make: GE/L&T/Havells/Indoasian

Supply and install ON LOAD change over switch 415V 4 pole of capacity 250 Amps in open execution type fixing in existing panel if required then including necessary modification in the panel and incl dismanlting old one complete all as specified and as directed. Make: GE/L&T/Havells/Indoasian

Supply and install ON LOAD change over switch 415V 4 pole of capacity 200 Amps in open execution type fixing in existing panel if required then including necessary modification in the panel and incl dismanlting old one complete all as specified and as directed. Make: GE/L&T/Havells/Indoasian

Supply and install ON LOAD change over switch 415V 4 pole of capacity 160Amps in open execution type fixing in existing panel if required then including necessary modification in the panel and incl dismanlting old one complete all as specified and as directed. Make: GE/L&T/Havells/Indoasian

Supply and install ON LOAD change over switch 415V 4 pole of capacity 100 Amps in open execution type fixing in existing panel if required then including necessary modification in the panel and incl dismanlting old one complete all as specified and as directed. Make: GE/L&T/Havells/Indoasian

Supplying, fixing and testing of Flood light die cast aluminium of 200 W, 230 volts including inbuilt drive with all fixing arrangements with nuts & bolts, clamps, iron chanels on poles etc complete all as specified and directed by Engineer-in-Charge including taking out old one Make:Havells/ Philips/GE/WIPRO.

Decarburizing/cleaning complete LT 415 Volts 3 phase panel/ bus bar chamber with electrical connections, complete bus bar from the bus bar chamber, cleaning with CTC and ensure proper decarburizing, refixing the same after applying Backtol Red solution to the bus bar insulator & checking all the connections, tightening the nuts, bolts & thimbles of in-coming/out-going system complete incl replacement of defective rusted bolts & nuts all as specified and directed.

Supplying,fixing and testing of Gate light / Post top light fitting 70 W LED with die cast aluminium body with drive, 230 volts with spun aluminium landscape luminaire and IP-65 protection with high power LED as source all necessary fixing arrangments and fittings etc including taking out old one of any type complete all as specefied and directed. Make: Bajaj / Philips/GE/Wipro.

M & L for Removing electric / mechanical connections of old LT UG cable from MCCB of existing LT Panel of size from 16 sq mm to 100 Sq mm, 3.5 / 4.0 core including cutting/removing the burnt end/ jointed area and after refixing with new aluminium thimble /lugs set , incl covered with proper insulated tape, clamps, nut bolts etc if required etc all as specefied and directed by Engr -in-charge.

M&L for Removing electric / mechanical connections of old LT UG cable from MCCB of existing LT Panel of size from 120 sq mm to 240 Sq mm, 3.5 / 4.0 core including cutting/removing the burnt end/ jointed area and after refixing to MCCB/ACB with new aluminium thimble /lugs set , incl covered with proper insulated tape, clamps, nut bolts etc if required etc all as specefied and directed by Engr -in-charge.

Supplying, fixing and testing of landscape light for garden and slope areas 10 W LED Integral decorative bollard inverted pyramid tripod with IP-65 protection of all necessary fixing arrangments and fittings etc including taking out old one of any type complete all as specefied and directed. Make: CG /Havells/Philips/GE/WIPRO.

M&L for taking out the loose or separated Door / canopy / front & back sheet covers for existing the LT panel and refixing the same after welding, provn of nut bolts / hinges if required as per site, proper locking arrangement and fixing of proper earth connection etc complete all as specefied and directed.

Taking out the Loop in loop junction box , disconnet the cable connections and refixing the loop in loop box with cable connections with provision of new set of aluminium Lugs / thimbles of size 10 sqmm / 16sqmm / 25sqmm / 35 sqmm for 3.5 / 4.0 core existing LT cables of any type including provision of necessary tape insulation, clamps for fixing of cables ,fittings and fixtures, nut bolts, clamps etc complete all as specefied and directed.

Preparation of external surfaces of LT panels indoor / outdoor type for painting by scraping down old dusted paint by steel brush broomming rubbing and cleaning applying two coats of synthetic enamel paint as approved and marking feeder details all as directed by Engineer-in-Charge.

Supplying, fixing and testing of Street lights LED 150 Watt with drive, 230 volts or nearest size pressure die cast aluminium housing luminaires with high power LED source on 09 mtr/11Mtr poles with all necessary fixing arrangments and fittings etc including taking out old one of any type complete all as specefied and directed. Make: Havells / Philips/ GE/Wipro.

Supplying, fixing and testing of Gate light / post top light fitting 40 W LED WW with die cast aluminium body with drive, 230 volts with spun aluminium landscape luminaire and IP-65 protection with high power LED as source all necessary fixing arrangments and fittings etc including taking out old one of any type complete all as specefied and directed. Make: Bajaj / Philips/GE/Wipro.

M&L for preperation of old painted surface, cleaninig of oils, lubricants, grease etc complete of any type of 9/11 mtr long poles as per IS above PCC coping with applying 2 coats of aluminium paint including brackets, clamps and terminal boxes including 5 cm wide two nos red colour flourcent strip pasting on pole as directed and writing pole Nos all as specefied and directed.

Supplying, fixing and testing of landscape light for garden and slope areas 9 W LED Integral decorative bollard with all necessary fixing arrangments and fittings etc including taking out old one of any type complete all as specefied and directed. Make: Bajaj / Havells/Philips/GE/WIPRO.

Supplying, fixing and testing of LED post top lantern light fitting with die cast aluminium body with drive, 230 volts with spun aluminium landscape luminaire, 27 Watt and IP-65 protection with high power LED as source all necessary fixing arrangments and fittings etc including taking out old one of any type complete all as specefied and directed. Make: Philips /Bajaj/GE/Wipro.

Supplying, fixing and testing of LED post top lantern light fitting with die cast aluminium body with drive, 230 volts with spun aluminium landscape luminaire, 40 Watt and IP-65 protection with high power LED as source all necessary fixing arrangments and fittings etc including taking out old one of any type complete all as specefied and directed. Make: Bajaj/Philips/GE/Wipro.

Supply and replacement of multi core PVC insulated stranded copper conductor of size 1.5 sqmm 3 core cable to be connected with street light fittings to loop-in and out boxes with its end point terminal connection all as directed. Make : Polycab / Finolex /Havells

Supply and fix hot press moulded junction boxes with hinged door, fitted with 4 P ,50Amps rated connector and neutral link mounted in the box,including necessary fixing arangement to the steel tubular pole/over walls including taking out old one complete all as directed. Make : Sintex /Hansel/ Havells

Supplying, laying, testing and commissioning LT XLPE insulated , armoured heavy duty electric cable of following sizes, 1100 volts grade with stranded aluminium conductor laid in trenches / passing through pipe / duct/ road crossing /fixed on poles / walls Complete all as specified and directed. MAKE: Havells / Gloster / KEI Industries Ltd / Polycab / Asian Cables / Finolex [Note: The rate quoted shall inclusive of termination at ends with suitable aluminium lugs where required]

16 sqmm 4 core

25 sqmm 4 core

95 sqmm 4 core

50 sqmm 3.5 core

70 sqmm 3.5 core

120 sqmm 3.5 core

185 sqmm 3.5 core

240 sqmm 3.5 core

300 Sqmm 3.5 core

Excavation in trenches n.exc 1.5 m wide and not exc 1.5 m depth and getting out in soft / loose soil complete all as specified and directed.

Removal of surplus excavated material of any type to a distance not exceeding 50 m and depositing where directed at a level not exc. 1.5 m bove the starting point complete all as specified and directed.

Returning and filling in of excavated material any type including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed.

M&L for sand cushioning / sand covering for underground cable protection complete all as specified. Note: Punned thickness shall only be measured and paid.

Supply and laying sub class 'B' bricks of old size (approved size locally available) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge

Supply and fixing indication lamp, 230 volts AC, LED type colour of RYB complete all as directed. Make :- KAYCEE / TECHNIK / L & T

Supply, fixing, testing and commissioning of following of CT, class of accuracy class1 upto 5 VA, including disconnecting old U/S meter, removed from bus bar, fixing new CT to bus bar with suitable clearance, secondary wiring with FRLS insulated copper conductor and lugs with suitable size complete all as directed. Make:- ALSTHOM / CROMPTON GREAVES / KAPPA / AE/ SIEMENS

S&F Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for HT, 25x20 cm size complete all as specified and directed.

Supply & fabrication of LT Panel Board floor mounted outdoor cubical type with compartments for each out going and incoming feeders made of CRCA of 3.15 mm thick MS sheet power coated of suitable size with support of angle iron of 50 x 50 x 6 mm angle iron bottom legs frame with double hinged with front and rear opening, hinged doors with projected an raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for existing cables, danger notice plate, strickering of Switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS tinned Aluminium bus bar with for three phase and four wire LT AC, 50 Hz ,415 V, 480 Amp capacity complete with powder coating, with accomodating following items:-

Incoming :- 1) MCCB , 4P, 35KA, 320 Amp adjustable type - 01 No. Out going :- 1) MCCB, 3P, 25 KA, 125 Amp fixed type - 01 No 2) MCCB, 3P, 25 KA, 100 Amp fixed type - 03 Nos 3) Digital Intelligent Panel meter to measure voltage, current, frequency, power factor, kWH, etc with all connected CTs - 01 No 4) Aluminium Bus bar for 3 phase supply 5) LED indicating lamp with colour Red, Yellow, Blue - 01 Set Make of ACB/MCCB : L&T/Seimens/Schneider/Legrand/C&S/Indoasian

M & L in repairs of LT panel for Supply & fabrication of CPRI approved LT Panel Board floor mounted outdoor cubical type with compartments for each out going and incoming feeders made of CRCA of 3.15 mm thick MS sheet power coated of suitable size with support of angle iron of 50 x 50 x 6 mm angle iron bottom legs frame with double hinged with front and rear opening, hinged doors with projected on raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for existing cables, danger notice plate, strickering of Switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS tinned copper bus bar with for three phase and four wire LT AC, 50 Hz ,415 V, 750 Amp capacity complete with powder coating, with accomodating following items in replacement of Old HRC fuse set / old unserviceable MCCB's/old defective meters etc:-

Incoming :- 1) MCCB , 4P, 35KA, 500 Amp adjustable type - 01 No Out going :- 1) MCCB 3P 35KA 250 Amps fixed type -1 Nos 2) MCCB, 3P, 25 KA, 125 Amp fixed type - 02 Nos 3) MCCB, 3P, 25 KA, 100 Amp fixed type - 02 Nos 4) MCCB, 3P, 25 KA, 63 Amp fixed type - 02 Nos 5) Digital Intelligent Panel meter to measure voltage, current, frequency, power factor, kWH, etc with all connected CTs - 01 No 6) Copper Bus bar of 800 Amp incl PVC sleeves for 3 phase with neutral supply - 01 Set 7) LED indicating lamp with colour Red, Yellow, Blue - 01 Set. Make of ACB/MCCB: L&T/ Seimens/ Schneider/ Legrand/ C&S/ Indo Asian

Supply & fabrication of LT Panel Board floor mounted outdoor cubical type with compartments for each out going and incoming feeders made of CRCA of 3.15 mm thick MS sheet power coated of suitable size with support of angle iron of 50 x 50 x 6 mm angle iron bottom legs frame with double hinged with front and rear opening, hinged doors with projected an raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for existing cables, danger notice plate, strickering of Switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS tinned Aluminium bus bar with for three phase and four wire LT AC, 50 Hz ,415 V, 400 Amp capacity complete with powder coating, with accomodating following items:-

Incoming :- 1) MCCB , 4P, 35KA, 250 Amp adjustable type - 01 No Out going :-1) MCCB, 4P, 25 KA, 100 Amp fixed type - 03 Nos 2) Digital Intelligent Panel meter to measure voltage, current, frequency, power factor, kWH, etc with all connected CTs - 01 No 3) Aluminium Bus bar for 3 phase supply 4) LED indicating lamp with colour Red, Yellow, Blue - 01 Set Make of ACB/MCCB : L&T /Seimens /Schneider /Legrand /ABB / Indo asian

Taking out & dismantling of old existing LT FPB cubical panels, removing electrical and mechanical connections complete , dismatling of PCC etc incl transportation to MES store yard / Contractor store yard incl all necessary arrangements, labour & tools as required at site etc complete all as specefied and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level, connected to galvanized earth strip of 50X6mm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected from earth plate electrode to main switch board/ earthing test point including watering arrangement with PCC 1:3:6 type C1 chamber, MS funnel, wire gauge, 50mm thick precast RCC cover in Type B1, including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to a distance n.exc 50m, charcoal and salt complete all as shown in electrical plate No. 3 of Schedule Part-I 2009 and connected to earthing test point all as specified or indicated and testing on completion

M&L for re-windings of HT distribution transformers of any capacity/ size/ type by strip opening of HT coils (i.e. Primary coils) from core assembly safely, unwinding the HT (i.e. Primary coils) complete, removing the old defective insulation paper, rewinding with new copper wire of same gauge and existing size together with new DPC insulation to the copper conductor, varnishing of the windings including heating/ drying/ backing complete carefully and thoroughly inside the heating chamber at suitable temperature to obtain required value of insulation resistance etc. all as directed by Engr-in- charge.

M&L for re-insulating of LT strip of transformers of any capacity/ type by insulating with copper strip as per same gauge and existing size together with new insulated materials/ bracings before placing in to the transformer and assembling the coil with new insulation and fitting the coils in the chamber, testing and commissioning the transformer complete all as directed.

Filtration of transformer oil of transformers/ FRMUs installed at various locations to achieve di-electric strength not less than 60 KV at 2.5mm gap as per relevant IS with portable filtration plant, testing of the oil for the di-electric strength before filtration and after filtration complete all as directed by the Engineer-in-Charge.

Supply and topping up of transformer oil with di-electric strength not less than 50 KV in to the conservator tank/ body tank of the transformer/ OCB/ FRMUs etc. at various locations complete all as directed by the Engineer-in-Charge. [Make: Power oil/ Transol/ Savita Chemicals]

M&L for replacement of the LT porcelain bushings complete of following capacity distribution transformers of existing transformer make/ size/ type all as directed including dismantling old one.

Above 300 KVA to 1250 KVA

Up to 300 KVA

M&L for replacement of the HT porcelain bushings complete of following capacity distribution transformers of existing transformer make/ size/ type all as directed including dismantling old one.

Above 300 KVA to 1250 KVA

Up to 300 KVA

M&L for replacement of the HT bushing with gun metal rod with threading & of suitable length/ size all as per existing including metal rings/ bolts/ washers/ rubber rings etc. complete of following capacity distribution transformers of any make/ size/ type all as directed including dismantling old one.

Above 300 KVA to 1250 KVA

Up to 300 KVA

M&L for replacement of the LT bushing with gun metal rod with threading & of suitable length/ size all as per existing including metal rings/ bolts/ washers/ rubber rings etc. complete of following capacity distribution transformers of any make/ size/ type all as directed including dismantling old one.

Up to 300 KVA

above 300 KVA to 1250 KVA

M&L for preparation of old painted surfaces of transformers with coarse cloth/ brush and painting throughout externally on exposed surfaces with two coats of smoke grey colour synthetic enamel paint including complete including one coat of white wash for base foundation all as specified and directed by Engineer-in-charge for the following capacity in-door/ out-door type transformer:-

Upto 300 KVA

Above 300 KVA to 1250 KVA

Supply and fix in repairs off load tap changer assembly suitable for any make with tapping position including opening top cover, conservator etc.

300 kVA to 1250 kVA

Up to 300 KVA

Supply and laying or fixing or passing through pipe or in cable ducts, 11000 volts grade XLPE insulated Heavy duty (earthed),screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor 185 sq mm 3 core size including dismantling old one complete all as specified and directed by Engineer-in-Charge. MAKE: Havells / Gloster / KEI Industries Ltd / Polycab / Asian Cables / Finolex.

Supply and laying or fixing or passing through pipe or in cable ducts, 11000 volts grade XLPE insulated Heavy duty (earthed),screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor 240 sq mm 3 core size including dismantling old one complete all as specified and directed by Engineer-in-Charge. MAKE: Havells / Gloster / KEI Industries Ltd / Polycab / Asian Cables / Finolex.

Supply and laying or fixing or passing through pipe or in cable ducts, 11000 volts grade XLPE insulated Heavy duty (earthed),screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor 95 sq mm 3 core size including dismantling old one complete all as specified and directed by Engineer-in-Charge. MAKE: Havells / Gloster / KEI Industries Ltd / Polycab / Asian Cables / Finolex.

Supply and fix cable jointing kit for 11 KV grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 240 sq. mm complete all as directed . Make: M-Seal/ 3M/ Raychem/ Denson

Supply and fix cable jointing kit for 11 KV grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 240 sq. mm complete all as directed . Make: M-Seal/ 3M/ Raychem/ Denson

Supply and fix cable jointing kit for 11 KV grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 185 sq. mmcomplete all as directed . Make: M-Seal/ 3M/ Raychem/ Denson

Supply and fix cable jointing kit for 11 KV grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 185 sq. mmcomplete all as directed . Make: M-Seal/ 3M/ Raychem/ Denson

Supply and fix of Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 240 sqmm complete all as directed . Make: M-Seal/ 3M/ Raychem/ Denson Note 59 to 63 : Excavation , removal, Returning filling etc to be measured and paid separately under respective schedule.

M&L for detecting HT/LT UG cable faults located in any stretch / depth with cable fault locator consisting of microprocessor based, identification instrument, cable tracer for exact location of under ground cable routes. Note :- The rate quoted deemed to be inclusive of rental charges for T&P like entire cable fault locating instrument, charges for operator and transportation etc complete.

Supplying , fixing and testing of timer switch 65 A 3 pole panel complete for street light controls analog time switch with connected items fixing on pole/wall/panels including PCC with all fixing arrangements complete , taking out old one etc all as directed. Make: Havells / L&T / Siemens /Hager / Schneider/ Indo asian.

Taking down defective street light fitting of any size /any type/ any capacity from height of pole/ walls/ high rise of any location of poles of 09 Mtr / 11 mtr height from ground level for reapir work and fixing back after repair work including checking, inspecting, testing and commissioning complete all as directed by Engr-in-Charge. Note : (a) Spares like ballast, lamp, starter, capacitor , igniter, holders, lamp holder, etc. shall be measured and paid separetely under relavant items of schedule'A' (b) Necessary tools like mobile ladder & other T&P required etc shall be arranged by the contractor (c) The rate quoted deemed to be inclusive for minor repair parts like nuts, bolts,cirle clips, clamps etc if required at site.

Supply the following spares for street light fittings of any type, any model as per existing parts as per site requirement ( Make : Phillips/ crompton Greaves / Havells / GE )

LED driver suitable for street light upto 45/60 Watt LED fitting.

LED driver suitable for street light 90/120 Watt LED fitting.

LED driver suitable flood light 100 watt to 250 Watt LED fitting.

Supply & fix LED tube light mini LED batten (4 ft) along with fixture and LED Rod 20 W complete as directed . Make : Bajaj /Phillips/ crompton Greaves / Havells / GE

Supply and laying in replacement armoured single mode optic fibre cable of four core suitable for ethernet communication between controllers and the CMS complete all as specified and directed including taking down old one. Make: Finolex / RPG / D-Link/Polycab

Servicing of Trophy FT Dual pulse/polarity Fence energizer (Model 2A0472) suitable for operating voltage of 12 Volt DC complete all as specified. Make: GALLAGHER

Servicing of Power supply control PCB module (Power card) suitable for Trophy FT Fence Controller with operating voltage of between 90V to 265 V AC 50-60Hz complete all as specified. Make: GALLAGHER or equivalent

Servicing of GALLAGHER controller Cardax 5000GL all as specified. Make: GALLAGHER or equivalent

Supply and fixing of SMPS Rapid Battery chager cum Power Supply Unit for DC Power supply 12 Volt DC - 10 Amps with surge and fuse protection, cooling fan, relay contact, indication for power ON, boost charge, float charge and polarity reverse suitable to charge the Large 65 AH SMF Battery. Make : APC/SUNOM/Gallagher or equivalent

Supply and fixing Alarm device operating on 12V DC supply having audibility of 110 db level, and operate when voltage on the fence is <3KV all as specified. Make: Suraj/Gallagher or Equivalent

Supply and fixing Sealed Low Maintenance battery (SMF-VRLA) of 12V 65AH capacity all as specified. Make : Exide/AMCO/AMRON

Supply and fixing Sealed Low Maintenance battery of 12V 7 AH capacity all as specified. Make : Exide/AMCO/AMRON

Supply and fixing Ethernet to OFC convertors (ethernet switch) with 3 port -10/100 BaseT(X) + 2 port- 100 Base-FX with power input 12 V DC - 36 V DC, complete all as specified. Make : 3 One Data (Model: IES-205-2F) /Moxa / D Link

Supply and fixing End Strain Hooks hot dip galvanized upto 30microns for fixing strain insulators and tensioners complete all as specified. Make: Gallagher or equivalent

Supply and fixing Corner Strain Hooks hot dip galvanized upto 30microns, for fixing strain insulators and tensioners complete all as specified. Make: Gallagher or equivalent.

Supply and fixing End strain insulators of high impact, high strength UV polycarbonate material virgin grade capable of withstanding up to 15KV and shall not allow power leakage complete all as specified. Make: Gallagher or equivalent

Supply and fixing Joint clamps of spin galvanised MS material suitable for strand size upto 4mm (3/16" 8 guage) complete all as specified. Make: Gallagher Cat No. GAL 6035 or equivalent

Taking down unserviceable electric power fence wire and supply and fixing high tensile wire of 2.59mm with zinc coating of min 230 gsm corrosion resistant , having UTS of 140Kg/Sqmm, as per IS 398 complete all as specified and directed. Make: TATA or equivalent

M&L for repair of Diesel Engine by dismantling the Sub-assemblies such as fuel pump, fuel injection, wood ward Governor, turbo-charger, radiator, oil cooler, engine heads, rocker arms, self starter, dynamo-engine wiring, terminal contacts and safety controls etc. including replacement of spare parts as required and re-assembling the sub-assemblies after carrying out necessary repairs including testing and commissioning complete all as directed by Engineer-in-charge for the following capacity. Notes: 1. Supply only Spare Parts required shall be measured and paid separately under relevant items of Schedule 'A' 2. Repairs and calibration of Sub-assemblies shall be measured and paid separately under relevant items of Schedule 'A'

M&L for Repair & Calibration of wood ward Governor as per calibration procedure and norms for the following capacity of DG Sets:

M&L for Repair & Calibration of turbo super charger as per calibration procedure and norms as per manufacturer's guide lines including replacement of Turbo supply & discharge hoses and clamps and de-scaling of Turbo charger complete all as specified and directed for the following capacity of DG Sets:

M&L for Repair & Calibration of Fuel Pump & Injectors as per calibration procedure and norms as per manufacturer's guide lines including replacement of unserviceable 'O' rings, Plungers and cups etc.

M&L for Repair & Calibration of Self Starter including re-winding of Commutator, replacing Carbon brush set, carbon brush holder, King Pins Holders, armature check nuts, body screws, clutch plate assembly and solenoid etc.

M&L for De-scaling of radiator by dismantling the upper & lower tank and cleaning the core pipes with cleaning chemicals, components and arrest the leaking core by brazing/ dummy with lead including cleaning of upper and lower tanks and replacing the upper and lower gaskets and required nuts, bolts, refixing the same including testing and painting complete all as specified and directed for the following :

M&L for Maintenance and servicing of alternator of any Make of any capacity by opening the end cover, cleaning the dust and rust formed over the terminals, cleaning with CTC liquid up to the satisfaction and checking of diodes , excitation winding, isolating transformer and AVR panel and applying Dr. beck paint for insulation improvement over the strips/ winding and drying till getting sasfactory insulation resistance complete, and refixing the covers and testing complete all as specified and directed for the following capacity of alternators:

Supply only the following Spare Parts as required during repair of engine Head-reconditioning of capacity 62.5/100 KVA

a)Valve guide

b) exhaust valve

c) intake valve

d) valve spring

e) valve lock

f) valve set

g) gasket kit

Supply, replacing,testing & calibrating and commissitoning of Engine oil pressure gauge,dial type,Analog type,range 0 to 10 kg/cm²,resolution 0.25kg/cm²,control wiring complete all as directed

Supply, replacing,testing & calibrating and commissitoning of coolant temperature gauge,dial type,Analog type,range 0 to 150 C°,resolution 5C°,control wiring complete all as directed

Supply, replacing,testing & calibrating and commissitoning of ammeter,dial type,Analog type,range -150 - +150 Amps,resolution 10Amps,control wiring complete all as directed

Supply, replacing,testing & calibrating and commissitoning of hour run meter cum tacho meter,dial type,Analog type,range 0 - 3600 RPM,reselution 50 RPM,control spring cable including inner and outer complete all as directed

Supply, install, testing and comissioning of tubular batteries 12 V, 180 AH including copper terminal lugs complete and replace disconnecting old unserviceable 12V,180AH batteries with copper terminal lugs complete. Make: Exide/Tata green/Amron

Material and labour for maintenance to 62.5 KVA Gen Set for 'B' check as per the recommendations of manufacturer including renewing of necessary filters, Engine oil etc, complete all as per manufacturers instructional manual and all as directed by Engg-in-charge. Note : Engine oil shall be suplied by contrctor for carrying out 'B' check. The quoted rate deemed to be included for the same.

Material and labour for replacement of air cleaner filter to 62.5 KVA Gen Set matching with existing and as per the recommendations of manufacturer all as directed by Engg-in-charge.

Supply only for top up engine oil 15W40 or as per manufacturers recommendations. Make: Servo/ Volvoline/HPCL

Supply and fixing in repair Self Starter motor for 62.5 KVA Kirloskar make matching with existing and as per the recommendations of manufacturer .

SRI SAI KRISHNA ENGINEERING WORKS

THE VENKATESWARA SUPPLIERS

ALPHA ENGINEERING CONSTRUCTIONS

M/s.DSRK CONSTRUCTIONS

MARINE TECHNICAL SERVICES

AARAV POWER CONTROLS