Additional civil works for the proposed shifting of CSC Tirur under Malappuram BA

Amount

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.

a) 80x1.25 mm M.S. laths with 1.25 mm thick top cover.

Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).

Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-charge.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

a) Hot finished welded type tubes.

Providing and laying matt finished vitrified tile of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

a) Cement mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster of mix :

a) 1:6 (1 cement: 6 fine sand)

Dismantling of existing CSC counters of size 12.00 m x 0.60 m madeout of wooden frames covered with granite top over the Plywood and laminated front facias by dismembering the Granite slabs, plyboards along with lamination including wooden frames , cash counters and flap doors etc and arranging in such a way to transport to other building etc complete as directed by the Engineer Incharge.

Transportation of dismantled CSC counter materials from the present CSC to Proposed CSC in Thazepalam , Tirur building including loading , transporting and unloading at site etc complete as direted by the Engineer Incharge.

Reassembling of CSC counters of size 12.00 m x0.60 m with available members dismantled from old CSC inlcuding Provision for replacing the damaged plywood, lamination, screws and Hinges including enamel painting and polishing etc complete as direted by the Engineer incharge.

Dismantling of False ceiling madeout of 600 x600 mm size Perforated ceiling particle boards supported over the aluminium grids including dismantling Hanger roads, aluminium grids and stacking of reusable ceiling tiles etc complete as dirted by the Engineer incharge.

Transportation of dismantled False ceiling materials from Mananchira TE building at kozhikode to Tirur Thazepalam building including loading , transporting and unloading at site etc complete as direted by the Engineer Incharge.

Refixing of falseceiling with available aluminium grids , perforated particle boards of size 600 x600 mm with provision for new Hanger roads and aluminium grid sections wherever required including painting of ceiling tiles with two coats of enamel paint etc complete as direted by the Engineer incharge.

Providing & fixing at all heights, levels and locations colour finish 2.00 mm thick polycorbonate sheet roofing sheets approved brand. Theprofile sheets shall be fixed to truss members in slope or requiredpitch or curvature with Hex cap headed self drilling/tapping Stainlesssteel screws M6, 50 mm long with 3 mm EPDM seal washer etc. allinclusive of labour, scaffolding, T&P and sundries etc. complete asper directions of the Engineer-In-Charge. (Cost of truss/frame workshall be paid separately).

Dismantling of RCC Chajja having projection upto 60 cm and thickness upto 100 mm including cutting the Reinforcement and making good the RCC surface with cement Mortar 1:3 etc complete as directed by the Engineer Incharge.

Clearing the bushes and vegetation growth alround the building and over the wall and cleaning the accumulated mud inside the compound and disposal to the nearest dumping place etc complete as diretced by the Engineer Incharge.

Cleaning of Teraazo tile flooring and wall tiles using floor cleaning liquid equivalent to LIZOL and removal of stains from the tiles using stain remover etc and finally water washing the entire floor area upto 100 sqm using soap solution etc complete as directed by the Engineer incharge.

Easening of Window shutters of size upto 0.5X 0.75 M including replacing damaged hinges, and Handles and repairing shutter ensuring proper operation of window shutters etc complete as per the direction of Engineer in charge.

Easening Door shutters of width upto 1.20 m including replacing damaged hinges, and repairing shutter ensuring proper operation of door shutters etc complete as per the direction of Engineer in charge.

Fixing in postion the available steel Cash Chest of size upto 600 mm x450 mm x 750 mm including providing Cement concrete covering all the sides except front side and finishing the surfaces etc complete . The rate is inclusive of dismantling of existing Cash chest available in the OCB Exchange tirur and shifting to this building etc complete as dirted by the Engineer Incharge.