Third party consultants for Inspection, testing, quality control & monitoring and construction supervision for the work of Providing community irrigation facility to 9950 Ha of leftout area in Athani Taluk, Belagavi District Including Filling up of 17 Nos MI/ZP tanks by lifting water from Krishna River near Zunjurwad Village of Athani taluk Belgaum District for the work of Ammajeshawari (Kottalagi) LIS Phase-I

Third party consultants for Inspection, testing, quality control & monitoring and construction supervision for the work of Providing community irrigation facility to 9950 Ha of leftout area in Athani Taluk, Belagavi District Including Filling up of 17 Nos MI/ZP tanks by lifting water from Krishna River near Zunjurwad Village of Athani taluk Belgaum District for the work of Ammajeshawari (Kottalagi) LIS Phase-I

TESTS ON SOIL SAMPLE Conducting Mechanical analysis (Sieve test) as per IS Codes as directed by Engineer-In-incharge

Conducting Liqid limit and plastic limit test as per IS Codes as directed by Engineer-In-incharge

Conducting Specific gravity test as per IS Codes as directed by Engineer-In-incharge

Conducting Standard compaction test [OMC % MDD] as per IS Codes as directed by Engineer-In-incharge

Conducting Traxial shear at OMC/in-situ condition test as per IS Codes as directed by Engineer-In-incharge

Conducting Permeability Test at OMCas per IS Codes as directed by Engineer-In-incharge

Conducting Triaxial shear at saturation as per IS Codes as directed by Engineer-In-incharge

Conducting Swelling pressure test as per IS Codes as directed by Engineer-In-incharge

Conducting Consolidation test as per IS Codes as directed by Engineer-In-incharge

TESTS ON CEMENT SAMPLE Conducting Consistency test as per IS Codes as directed by Engineer-In-incharge

Conducting Fineness test as per IS Codes as directed by Engineer-In-incharge

Conducting Soundness test by Le-Chatellier method as per IS Codes as directed by Engineer-In-incharge

Conducting Initial and final Setting time [for set of three nos] as per IS Codes as directed by Engineer-In-incharge

Conducting compression test on cement concrete cubes as per IS Codes as directed by Engineer-In-incharge

TESTS ON FINE AGGREGATE Conducting Sieve analysis Test as per IS Codes as directed by Engineer-In-incharge

Conducting Particle finer than 75 micron test as per IS Codes as directed by Engineer-In-incharge

Conducting Specific gravity, bulk density, bulking & moixture content and water absorption test as per IS Codes as directed by Engineer-In-incharge

Conducting Fineness Modulus test as per IS Codes as directed by Engineer-In-incharge

Conducting Silt content test as per IS Codes as directed by Engineer-In-incharge

TESTS ON COURSE AGGREGATE Conducting Sieve analysis Test as per IS Codes as directed by Engineer-In-incharge

Conducting Particle finer than 75 micron test as per IS Codes as directed by Engineer-In-incharge

Conducting Specific gravity, bulk density.test as per IS Codes as directed by Engineer-In-incharge

Conducting Aggregate Impact value test as per IS Codes as directed by Engineer-In-incharge

Conducting Aggregate crushing value/10% fine value test as per IS Codes as directed by Engineer-In-incharge

Conducting Abrasion Value test as per IS Codes as directed by Engineer-In-incharge

Conducting Crushing Value test as per IS Codes as directed by Engineer-In-incharge

Conducting Stripping Value test as per IS Codes as directed by Engineer-In-incharge

Conducting lab test on steel (round bar/twisted) for determining tensile strength, elongation, 0.2% proof stress and unit weight of up to 20mm dia as per IS Codes as directed by Engineer-In-incharg...

Conducting lab test on steel (round bar/twisted) for determining tensile strength, elongation, 0.2% proof stress and unit weight of Dia nore than 20mm as per IS Codes as directed by Engineer-In-incha...

Casting and testing for compressive strength of Cement Concrete Cubes by normal curing method as per IS Codes as directed by Engineer-In-incharge

Extraction and Conducting Compression test of cement concrete core samples including capping &etc. and furnishing the reports. (for set of three cores) Up to 100 mm core diameter (4 inch) as per IS Co...

Conducting Slump test as per IS Codes as directed by Engineer-In-incharge

NON DESTRUCTIVE TESTING Conducting non-destructing test using rebound hammer at site as per IS Codes as directed by Engineer-In-incharge

Conducting Ultrasonic pulse velocity test as per IS Codes as directed by Engineer-In-incharge

TESTS ON BITUMEN Conducting Penetration test at site as per IS Codes as directed by Engineer-In-incharge

Conducting Specific gravity test at site as per IS Codes as directed by Engineer-In-incharge

Conducting Ductility test at site as per IS Codes as directed by Engineer-In-incharge

Conducting Flash and Fire point test at site as per IS Codes as directed by Engineer-In-incharge

Conducting Softening point test at site as per IS Codes as directed by Engineer-In-incharge

TESTS ON BITUMEN CONCRETE MIX Conducting Sieve Analysis test at site as per IS Codes as directed by Engineer-In-incharge

Conducting Impact Value test at site as per IS Codes as directed by Engineer-In-incharge

Conducting Abrasion Value test at site as per IS Codes as directed by Engineer-In-incharge

Conducting Flakiness & Elongation Index ,Water Absorption & Density test at site as per IS Codes as directed by Engineer-In-incharge

Conducting Bitumin content test at site as per IS Codes as directed by Engineer-In-incharge

TESTS ON GRANULAR SUB BASE Conducting Sieve Analysis test at site as per IS Codes as directed by Engineer-In-incharge

TESTS ON WET MIX MECADAM (WMM) Conducting Sieve Analysis test at site as per IS Codes as directed by Engineer-In-incharge

TEST ON PIPES Conducting Test on pipe shell thickness as per IS Codes as directed by Engineer-In-incharge

Conducting Test On Paint Thickness Of M.S Pipe as per IS Codes as directed by Engineer-In-incharge

Test On outer surface layer Of M.S Pipe Conducting Pull off adhesion test as per IS Codes as directed by Engineer-In-incharge

Conducting Gauge test as per IS Codes as directed by Engineer-In-incharge

Conducting Water Absorption test as per IS Codes as directed by Engineer-In-incharge

Conducting Cold Flexibility test as per IS Codes as directed by Engineer-In-incharge

Conducting Ultrasonic pulse velocity test as per IS Codes as directed by Engineer-In-incharge

Conducting Radiography test as per IS Codes as directed by Engineer-In-incharge

MEASUREMENT/BILLING SERVICES Engaging PROJECT MANAGER (Engineering Graduate Employee). as directed by Engineer-In-incharge

Engaging Field surveyour / Total station operator (Engineering Graduate Employee) as directed by Engineer-In-incharge

Engaging LAB TECHNICIANS (Engineering Graduate Employee) as directed by Engineer-In-incharge

Engaging HELPER LABORATORY as directed by Engineer-In-incharge

Engaging FIELD ENGINEERS (Diploma in Engineering Employee) as directed by Engineer-In-incharge