Building

Name of Work :- Const. Of Various Anganwadi Building at Sanand Ta. Sanand

Dist. Ahmedabad Package No. AHD/Anganwadi/21 (2026-2027) (Amnagar. Andej-

3, Nana Vidramgam, Rampura) Total-4

Memorandum Showing items of Works to be Carried out

Sr. Item of Work Quantities Unit Tender Total

No. estimated RatesIn Amount

but may Figures According to

be more Rs.P.S. Estimated

or less Quantities

1 Item no- 1 Excavation for foundation upto 1.5 mt.depth 245.640 Cum 149.67

including sorting out and stacking of useful materials and

disposing of the excavated stuff up to 50meter lead (B)

Dense or Hard soil

2 Item no- 2 Carring out plinth treatment to post 275.640 Sqm 105.95

construction / existing structure by spraying chemical

solution for termite control treatment including labour

and material consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As per 6131_ part-

II Consentration Weight one percent is recommended i.e.

one litre 20 EC chemical emulsion dillute with 19 liter

give 1 % concentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical / Sqmt.

of surface is recommended as per I.S.

3 Item no- 3 Providing and laying cement concrete 1:4:8 33.920 Cum 2838.81

(1- Cement : 4- coarse sand : 8- crushed stone aggregates

40 mm nominal size) and curing complete excluding cost

of formwork in (A) Foundation and Plinth

4 Item no- 4 Providing and laying cement concrete 1:3:6 33.640 Cum 3228.39

(1- Cement : 3- Coarse sand : 6- crushed stone aggregate

40mm normal size) and curing complete excluding cost

of formwork in (A) Foundation and Plinth

5 Item no- 5 Filling in plinth with sand under floors 57.080 Cum 460.19

including watering ramming, consolidating and dressing

6 Item no- 6 Filling foundation and plinth with murrum 536.000 Cum 289.06

or selected soil in layer of 20 cm in thickness

including ramming watering and consolidating etc.

7 Item no- 7 Filling available excavated Earth (Excluding 92.280 Cum 130.39

Rock ) in trench plinth side of foundation . in layer not

excluding 20 cm in depth consolidation each deposited

layer by ramming and watering etc. complete

8 Item no- 8 Providing and laying cement concrete 1:3:6 7.360 Cum 4046.21

(1 cement : 3 coarse sand : 6 crushed stone aggregates

mm nominal size) and curing complete including cost of

form work in (A) Wall caps/ copings.

9 Item no- 9 Providing and laying ordinary cement 4.840 Cum 8963.84

concrete 1:1.5:3 (1 Cement : 1.5 corse sand : 3 graded

stone aggregates 20mm nominal size) and finishing

smooth with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement of

R.C.C. work in (A) BEAMS :(ii) Having cross-sectional

area more than 0.05 Sq.m. and up to 0.08 Sq.m.

10 Item no- 10 Providing and laying ordinary cement 1.280 Cum 9090.84

concrete 1:1.5:3 (1 Cement : 1.5 corse sand : 3 graded

stone aggregates 20mm nominal size) for R.C.C. Lintel

including finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

11 Item no- 11 Providing & laying Ordinary cement 29.280 Cum 7258.19

concrete 1:1.5:3 (1cement : 1.5 coarse sand 3 graded

stone aggragate 20 mm nominal size) and finishing the

smooth with curing etc. complete including the cost of

formwok but excluding the cost of reinforcement for

RCC work in (II) slabs having more than 10 cm and upto

13 cm thickness.

12 Item no- 12 Providing T M T. bar reinforcement of Fe- 3748.000 Kg. 76.21

500D for R.C.C. work including bending binding and

placing in position complete up to All floor Level

13 Item no- 13 Brick work using common burnt clay 134.160 Cum 4051.78

building bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement Mortar

1:5. (1- Cement : 5 -fine sand) B) Conventional

14 Item no- 14 Brick work using common burnt clay 91.080 Cum 4326.75

building bricks having crushing strength not less than

35 kg./ Sq.Cm. in super structure in Cement Mortar

1:5. (1- Cement : 5 -fine sand) (B) Conventional

15 Item no- 15 Half brick masonry in common brunt clay 44.280 Sqm 653.17

building bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse

sand ) in super structure above plinth up to floor two level

Conventional Bricks for All Floors.

16 Item no- 16 Providing and fixing alluminium 21.760 Sqm 5990.68

anodised glazed door rectangular frame 60mm x 40mm x

2mm @ 1.037 Kg./ Rmt. weight, flush door shutters,

solid core construction with frame of first class hardwood

with cross board and face veneer or plywood face panels

, including anodised alluminium butt hinges with

necessary screws. including Laminated sheet 1 mm

thick,S.S. stoper 30cm long ASIS 304 grade,S.S. Aldrap

30cm long ASIS 304 grade,S.S. Handle 15cm long ASIS

304 grade,S.S. Handle Door stop ASIS 304 grade(2)

17 Item no- 17 Providing and fixing window having 19.160 Sqm 1713.70

extruded aluminum Colour anodized section frame main

outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg /

Rmt, horizontal two track member size 61.85 mm x

mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of

size 61.85 mm x 31.75mm x 1.30 mm @ wt.of

Kg/mt with sliding shutters of horizontal member size

40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical

member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

complete for window.

18 Item no- 18 Providing and fixing standared extruded of 12.640 Sqm 1175.56

alluminium section of size 63mm x 38.10mm x 1.2mm

@ Wt. 0.643 Kg/mt with colour anodized alluminium

frame for ventilation with 5 mm thick frosted glass as

details etc complete for Ventilation

19 Item no- 19 Providing and fixing M.S. grills of required 793.760 Kg. 106.07

pattern to wooden frames of windows etc. with M.S. flats

at required spacings and frame alround, square or round

bars with round headed bolts and nuts or by screws (A)

Plain Grill. including Applying priming coat and

Painting two coats (excluding priming coat) etc.

20 Item no- 20 Providing and laying Vitrified tiles 8 to10 181.000 Sqm 1484.61

mm thick, 36'' x36'' in flooring treads of step sand landing

laid on a bed of 12mm thick cement mortar 1:3 (1 cement

: 3-coarse sand ) finishing with flush pointing in white

21 Item no- 21 Providing & Fixing 30 mm thick polished 47.120 Sqm 709.06

Kota-stone slabs for Shelves of Cupboard shelves

including making grooves in walls and finishing with

C.M.( 1:1) and polishing etc. Complete.

22 Item no- 22 P & L 24"x24" vitrified 8mm thick tile 7.040 Sqm 1397.83

flooring over 20mm(average) base of cement mortar 1:6

( 1 cement:6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing &

cleaning the surface etc. complete for antiskit

23 Item no- 23 Providing and laying Vitrified tiles 8 to10 100.080 Sqm 1538.85

mm thick ,in skrting risers of steps and dedo on 10 mm

thick cement plaster 1:3 (1-cement :3-coarse sand) and

jointed with white cement slurry

24 Item no- 24 Providing and laying broken china mosaic 213.440 Sqm 747.29

flooring for Terrece using 12mm to 20mm of broken

piece of glazed tiles to be laid over cement mortar

bedding of CM (1:3) to plain or slope & to be tempered

to bring Mortar cream out upto surface using white

cement including rounding off junction and extending

them up to 15 cm along the wall clearing water and oxalic

acied etc as directed

25 Item no- 25 Providing and fixing machine cut, free edges, 102.720 Sqm 2823.61

mirror polished Granite stone slab 18 mm thick for

vertical wall/ Doors/ Windows Sill, Jams for cladding as

per design including full moulded round inside edge and

laid on 10 mm thick cement mortar 1:3 ( 1 cement:

coarse sand) jointed with grey cement slurry including

rubbing and polishing finishing etc. complete.

26 Item no- 26 Providing 15mm thick cement plaster in 425.840 Sqm 176.58

single coat on Rough (Similar) side of single or half brick

walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1-

cement: 3 sand) and finishing with a floating coat of neat

cement slurry.etc. complete.

27 Item no- 27 Providing 10 mm thick cement plaster 208.840 Sqm 153.67

in single coat on Ceiling / sofit of stair for interior

plastering finished even and smooth in (ii) Cement

mortar 1:3 (1-cement 3 - sand )for Ground Floor

28 Item no- 28 Applying two coats of acrylic lappy (putty) 534.600 Sqm 119.82

and two coats of primer & Wall painting ( two

coats) with plastic emulsion paint of approved brand

and manufacture on wall surfaces to give an even

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

29 Item no- 29 20 mm thick sand faced cement plaster on 554.000 Sqm 300.66

walls upto 10 mt height above ground level consisting of

12 mm. Thick backing coat of c.m. 1:3 (1 cement :

sand) and 8 mm. Thick finishing coat of c.m. 1:1 (1

cement : 1 sand) etc. complete as directed.

30 Item no- 30 Finishing wall with weather proof exterior 554.000 Sqm 114.53

emulsion paint on wall surface (two coats) to give an

required shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials etc complete

31 Item no- 31 Constructing a cooking platform 60 cm. 4.800 Rmt 2483.99

width and 70 cm high resting on B.B.Masonry walls

cm.thick in C.M. (1:6) with (i) Fixing or precast

R.C.C.1:2:4) 8 cm. thick slab with marble chips set in

C.M. (1:6) (6mm thick terrazo) with plastering on

exposed faces walls in C.M. (1:4) etc complete. including

the approved quality stainless steel sink of size 600 X

X 150 including fixing the sink in the stone platform with

waste pipe and whole work as per instruction of Engineer

32 Item no- 32 Providing laying and jointing in true line 60.000 Rmt 72.65

and level 15mm dia. U.P.V.C. Pipe ( SCH-40) for cold

water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be concealed

as directed including necessary fittings etc.

including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

33 Item no- 33 Providing laying and jointing in true line 80.000 Rmt 91.84

and level 25mm dia. U.P.V.C. Pipe ( SCH-40) for cold

water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be concealed

as directed including necessary fittings etc.

including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

34 Item no- 34 Providing laying and jointing in true line and 40.000 Rmt 119.15

level 32 mm dia. U.P.V.C. Pipe ( SCH-40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

35 Item no- 35 Provdg. & fixing gun metal check or 20.000 Each 420.63

nonreturn full way wheel valve. (C) 25 mm dia.

36 Item no- 36 Providing and fixing to wall ceiling floor 10 56.000 Rmt 277.43

Kg. F/Cm2 working pressure polythene pipes for soil

waste and ventilating pipes of the following outside

dia. low density, complete with necessary fittings

,wall clamps etc including making good the wall ceiling

and floor. (F) 75 mm

37 Item no- 37 Providing and fixing to wall ceiling floor 10 60.000 Rmt 336.24

Kg. F/Cm2 working pressure polythene pipes for soil

waste and ventilating pipes of the following outside

dia. low density, complete with necessary fittings

,wall clamps etc including making good the wall ceiling

and floor. (G) 110 mm

38 Item no- 38 Providing and fixing PVC SWR Nahni Trap 8.000 Each 571.08

IS 14735 for drain - 100 mm diameter with jali of the

following nominal diameter of self cleansing design with

C.I. screwed down or hinged grating including the cost

of cutting and making good the walls.

39 Item no- 39 Providing and fixing Screw down Quarter 8.000 Nos 214.81

turn bib taps of following size (A) Brass chromium

plated screw down Bib tap (Ii) 20 mm dia

40 Item no- 40 Providing and fixing wash basin with 8.000 Nos 2092.55

single hole for pillar tap with C.I. Or M.S. brackets

painted with including cutting holes and making good

the same including fittings, (fixing C.P brass waste

mm dia),( fixing M.I. fisher union 32 mm dia),(fixing

pillar tap,cap stan head , screw down high pressure with

screws, shank sand back nuts. 15mm dia), (fixing brass

screw down stop tap15mm dia), (fixing Rubber plug) (A)

Vitreous China (ii) Flat back wash Basin 550mm x

400mm size (i) in white colour

41 Item no- 41 Providing and fixing water closet squatting 8.000 Nos 1535.97

Pan (Indian type W.C.Pan) size 580mm (A) Vitreous

China.(I) Long pattern, White colour including Providing

and fixing(100mm size P or S trap for water closet

squatting pan including jointing the trap with the pan and

soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)

(A) Vitreous China.),(G.I. inlet connection for flush pipe

with W.C. Pan) (C.P. Brass 1/2 turn flush cock 25 mm

42 Item no- 42 Providing erecting and fixing double 4000.000 Liter 3.95

coated Syntex or equivalent PVC. (ISI) mark

water tank of required capacity each with all

necessary fittings & connection etc. comp on terrace.

43 Item no- 43 Providing and fixing S.W. Gully trap 4.000 Nos 1292.19

with C.I. Grating brick masonary chamber and

water tight C.I. Cover with frame of 300 mm. X

300 size (inside) with standard weight (I) Square

mouth traps (C) 100 mm. X 100 mm size P type

44 Item no- 44 Constructing brick masonary chamber 4.000 Nos 2932.93

for under ground C.I. Inspection chamber and

bends with bricks having crushing strength not

less than 35 Kg/cm2 in cm. 1:5 C.I. Cover with

frame (light duty) 455 mm. X 610 mm. Internal

dimensions, total weight of cover with frame to

be not less than 38 Kgs. weight of cover 23 Kg.

and wt. of frame 15 Kg) R.C.C. top slab with 1:2:4

mix(1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm. size ) foundation concrete

1:5:10 inside plaster 15 mm. thick with cement

mortar 1:3 finished smooth with a floating coat

of neat cement on walls & bed concrete etc.

complete. (I) inside dimensions, 455 mm. x 610 mm.

And 450 mm. Deep for single pipe line.

45 Item no- 45 Constructing brick masonary chamber 4.000 Nos 3660.76

for under ground C.I. Inspection chamber and

bends with bricks having crushing strength not

less than 35 Kg/cm2 in cm. 1:5 C.I. Cover with

frame (light duty) 455 mm. X 610 mm. Internal

dimensions, total weight of cover with frame to

be not less than 38 Kgs. weight of cover 23 Kg.

and wt. of frame 15 Kg) R.C.C. top slab with 1:2:4

mix(1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm. size ) foundation concrete

1:5:10 inside plaster 15 mm. thick with cement

mortar 1:3 finished smooth with a floating coat

of neat cement on walls & bed concrete etc.

complete. [II] Inside dimensions 500 mm. x 700 mm.

& 450 mm. deep for pipe lines one or two.

46 Item no- 46 Providing and constructing soak pit of 4.000 Nos 41305.11

size 2.46mt. outer and 6.0mt. deep including 23cm

thick brick masonary for top 0.75mt. height solid

masonary in cement mortar 1:6 and remaining honey

combed masonry in cement mortar 1:6 and covered

with jodhpuri patti C.I. pipe 100mm dia 1.8mt. long

etc. comp. as directed including 15mm plaster in

C.M. 1:4 over jodhpuri patti.

47 Item no- 47 Providing and fixing 90 cm high 60.000 Rmt 3662.27

Stainless Steel railing made from anticorrosive

grade S.S. pipe of 50 mm dia (16 gauge) as hand rail

with S.S. 304 grade baluster of 32 mm dia (16 gauge)

as a vertical support fixed in RCC slab / steps of stair

at 1.2 Mt. c/c including three horizontal S.S. pipes of

16 mm dia (16 Gauge) at equal distance fixed by

mm dia (16 Gauge) S.S. pipe with baluster including

accessories as per detailed drawing as directed etc.

48 Item no- 48 Construction of an under ground 8000.000 Litre 12.26

masonry water tank of size 2.00 m X 2.00 m X

m = 6000 litre capacity as per the approved drawing

& design etc. complete.

49 Item no- 49 Providing and fixing pre-cast Rubber 180.000 Smt 686.90

Dye/steel Dye interlocking concrete block 60 mm

thick with grade of concrete M300 pnumatic

compressed /vibrated mechanically and as per

approved design Confirming to IS 15658 :

including 35mm Sand layer for levelling and filling

the joint with sand in proper line and level as per

guidlines of IRC : SP 63-2018 etc. Complete.

50 Item no- 50 Providing and laying cement concrete 3.120 Cum 3697.91

1:2:4 (1 Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth

51 Item no- 51 (i) Half brick masonry in common brunt 21.840 Smt 599.84

clay building bricks having crushing strengthnot less

than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1 Cement:

4-coarse sand) in foundation and plinth

(B) Conventional

52 Item no- 52 Providing 15mm thick cement plaster in 54.560 Smt 205.37

single coat on brick /concrete walls for interior

plastering upto floor two level and finished even and

smooth in. (ii)Cement mortar 1:4 (1 cement:4-sand )

with finishing in floating coat of neat cement slury

53 Item no- 53 Providing and laying cement concrete 5.760 Smt 351.56

flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded stone

aggregate 20mm nominal size) laid in one layer and

finished with a floating coat of neat cement. (B) 50mm

54 Item no- 54 Providing and laying in ground 110 mm 120.000 Rmt 334.08

diameter PVC rain Water pipe 6 Kg./ Sq.cm. necessary

fittings connection as per detailed drawing as directed by

Engineer - in - charge.

55 Item no- 55 Providing and laying in ground 150mm 40.000 Rmt 429.76

diameter PVC rain Water pipe 6 Kg./ Sq.cm. necessary

fittings connection as per detailed drawing as directed by

Engineer - in - charge.

56 Item no- 56 Brickwork using common burnt clay 6.200 Cum 4021.02

building bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement Mortar

1:6 (1- Cement : 6-fine sand) (B) Conventional

57 Item no- 57 Providing formwork of ordinary timber 4.800 Smt 173.40

planking so as to give a rough finish including centering

shuttering strutting and propping etc. Height of propping

and centering below supporting floor to ceiling not

exceeding 4M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (A)

Foundations Footings Bases of Columns etc. and Mass

58 Item no- 58 Supplying of crused stone aggregate of 25 to 0.800 Cum 661.90

40 mm size as directed with 5 Km. lead

59 Item no- 59 Supplying of coarse sand as directed with 5 2.440 Cum 419.42

60 Item no- 60 Point wiring for Light / Fan/ Bell/ Primary 60.000 No. 390.87

Point with 2-1.5 sq. mm & earth wire of 1.5 sq. mm

(green) both are of ISI marked 1.1 kv grade FRLS PVC

insulated multi strand copper wires upto max length of

10 mt, in below type of pipe erected with 6A Tissino

Type ISI marked flush type switch / bell push and

accessories erected on Metal / PVC /Wooden Box

covered with 3 mm thick PC (Poly carbonate)

/Acrylic/Laminated sheet. with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete (Elect S.O.R. P NO.

17 Item No. 1-1-1 (f)

61 Item no- 61 Providing & erecting Approved make 12.000 No. 2311.89

Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C.50 Hz 1200 mm sweep complete

having 3 blades aluminium body and blade sets having

ornamental design shanks , canopy erected with earthing.

[ Make shall be approved by Engineer in Charge] (Elect

S.O.R P NO. 123 item code 5-1-3)

62 Item no- 62 Supplying and erecting LED indoor fittings 20.000 Ea. 295.93

with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sinks hallbe

made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with

companymark/name 160V to 270V, Power Factor more

than 0.95, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.TheEngineer

inchargemayselect any wattage capacity between the

ranges shown.) (A) Tube Light with integral driver. (iii)

18-20 Watts, Surge-2KV,IP-20, conventional 4 feet

(Elect. SOR P.NO.56 It Code 2-15-1 Cat. III)

63 Item no- 63 Point wiring for independent PLUG with 8.000 No. 347.44

following size mains earth wire of 1.5 sq.mm (green)

both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires upto 10 mt length, in

following below of pipe erected complete with ISI

marked 3 / 5 Pin socket and tissino type switch erected

with earth continuity connection erected on Metal /

PVC/Wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic/Laminated sheet.[A] For

amp plug and 6 amp switch with 2- 1.5 sq. mm Cu. Mains

from near by switchboard/ db board upto 6 mt.(f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete (Elect S.O.R. P NO.

64 Item no- 64 Providing & erecting 240 V MCB double 4.000 No. 270.68

pole switch for motor & inductive load (C Curve) having

10 KA breaking capacity & confirms to IS: 8828 in

existing box having following capacity(A) 6 to

Amp(Elect S.O.R. P NO. 87 Item No. 3-10-2 cat II)

65 Item no- 65 Providing and erecting Pipe type earthing 4.000 No. 823.15

with 40 mm dia 2.5 mtr long 'B' grade G.I. pipe with

necessary coupling buch buried in specially prepared

earth pit & G.I. earth wire of 8 SWG erected & connected

as directed (For panel) (Elect S.OR P NO. 95 Item No. 3-

66 Item no- 66 Providing & erecting open well horizontal 4.000 No. 10284.83

mono block pump set with cast iron body, complete for

three phase submersible motor having SECTION 9-4 [A]

For 1.5 HP 3 phase open well horizontal mono block

pump set suitable for 190 LPM @ 20 mtr head suitable

for 40 mm dia delivery pipe Catt-II (Elect S.OR P NO.

241 Item No. 9-4-2)

67 Item no- 67 Providing and fixing 600 mm x 450 mm 4.000 Nos 833.73

bevelled edge mirror of superior glass mounted on 6 mm

thick plywood sheet or PVC framing and fixed to wooden

plugs with C.P brass screw and washers.

68 Item no- 68 Providing and fixing C.P. brass towel rail 4.000 Nos 603.19

complet with C.P. brass brakets fixed to wooden plugs

with cpbrass screws ( B ) 600 mm X 20mm size

69 Item no- 69 Sheesham wood study Table and Chair. 4.000 No. 11992.74

Table dimension 34 inches length , 18 inches width and

30 inches height. Primary material solid sheesham

woodand secondary material 15mm solid MDF color

teak finish style.

70 Item no- 70 2 Seater School Benches and Desks (small) 20.000 No. 5095.45

71 Item no- 71 Furniture for Cup board 4.000 LS 20200.00

72 Item no- 72 Premium quality Kids Play school indoor 4.000 Set 20042.44

setup (1) Amazon basic junior BPA free 4 to score Giant

premium plastic games set.

73 Item no- 73 Premium quality Kids Play school indoor 4.000 Set 825.17

setup (2) Jazz Drum set.

74 Item no- 74 Premium quality Kids Play school indoor 4.000 Set 3584.49

setup (3) Play rubber tiles.

75 Item no- 75 Premium quality Kids Play school indoor 4.000 Set 607.01

setup (4) Clapjoy slingo fastest finger first board.

76 Item no- 76 Premium quality Kids Play school indoor 4.000 Set 7674.99

setup (5) OK play see saw yellow/ green.

77 Item no- 77 Premium quality Kids Play school indoor 4.000 Set 2513.89

setup (6) OK play Rocker medium for kids, boat ride on

78 Item no- 78 Premium quality Kids Play school indoor 4.000 Set 619.13

setup (7) Table tennis trainer

79 Item no- 79 Premium quality Kids Play school indoor 4.000 Set 384.81

setup (8) table tennis press button

80 Item no- 80 Premium quality Kids Play school indoor 4.000 Set 4305.63

setup (9) Dawnwake Baby play

81 Item no- 81 3D Wall painting (two coats)oainting 82.400 Sqm 1878.60

tech that creats the illusion of depth and dimention

on a flate surface wall art that can be use public

place3D model physical body using collection of

point in 3D space connected by various geometric

entities curve surface with plastic emulsion paint of

approved brand and manufacture on undecorated

wall surface to give an even draw a pictures and

writing a slogan releated of diffrent painting and

other theme based like harritage

painting,cleaness,plastic free city,save water, save

daughter,go green,clean city, etc.shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered

smooth etc.all material,scaffolding, additional coats

if required and labour or painter as directed by

Engineer in Charge . Method 1. Removing Dust

from wall with use of wire brush and sand paper .

2.Prepare surface with appying exterior puty

cement slurry, or plastering which one required for

even surface. 3. Appying Base coat of primmer

apply final even coat of colour 5. Draw line picture

6. pre detaling for painting 7. final detailing of 3D

painting 8. applying lacquer protection coat on the

whole painting area (make :- Asian Paints, Burger,

Nerolac. Equivalent brand as approved by the

82 Item no-82 2D Wall painting (two coats) with plastic 82.400 Sqm 1373.60

emulsion paint of approved brand and manufacture on

undecorated wall surface to give an even draw a pictures

and writing a slogan releated of SWATCHHTA

SURVEKSHAN Campain and other theme based like a

harritage,cleaness,plastic free city,save water, save

daughter,go green,clean city,City importance etc.shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth etc.all material,scaffolding, additional

coats if required and labour or painter as directed by

Engineer in Charge . Method 1. Removing Dust from

wall with use of wire brush and sand paper . 2.Prepare

surface with appying exterior puty , cement slurry, or

plastering which one required for even surface.

Appying Base coat of primmer 4. apply final even coat

of colour 5. Draw line picture 6. pre detaling for painting

7. final detailing of 2D painting 8. applying lacquer

protection coat on the whole painting area (make :- Asian

Paints, Burger, Nerolac. Equivalent brand as approved by

the authority. )

Rs. Fifty Two Lacs Forty Nine thousand One Hundred Thirty Two & Paisa Seventy Nine Only

I/We am / are wolling to carry out the work at

wrriten in figures and words) of the estimated rate mentioned above. Amount of my/ our tender works

*Estimated Amount *Estimated Amount

(* Please strike out whichever is not applicable.)

Notes 1 - All work shall be carried out as per Public Works Department Handbook and other

specifications of Division or as directed.

GM\W v! ov AW]\ H SFD AF\WSFD lJEFUGL 5]l:TSF VG[ l0lJhGGL ALHL BF; lJUT D]HA VYJF ;}RGF 5|DF6[ SZL VF5JFG]\ ZC[X[P

Notes 2 - All the columns is Schedule should be filled in ink and the total of the entries in the last

column should be struck by the contractor under his signature.

GM\W vZ ov VG];}lRDF\ AWF BFGFGL lJUTM ;CLYL EZJL VG[ K[<,F BFGFGL GM\WMGM ;ZJF/M SZL SMg8=FS8Z[ 5MTFGL ;CL SZJL

Deputy Executive Engineer Executive Engineer

R & B Panchayat Sub Division R & B Panchayat Divisions

Sanand Ahmedabad