GENERAL-KALIYAR PINDIKKAYAM- LIS -CT-PT ( HT WORKS )-Urgent replacement of CT-PT unit ,TOD meter in LIS Kaliyar Pindikkayam at Panamkara and Essential HT Maintenance at various schemes under Electrical LI Section Ramamangalam-HTElectrical- Work

Amount

Replacement of Metering Equipment at Kaliyar Pindikkayam

OD257371/2024-2025:Dismantling the existing damaged TOD meter and CT PT unit after Isolating the HT 4 pole structure, Earthing the HT Terminals using earthing chain, and taking all safety measures and stacking at yard as per the direction of the departmental officers at site.

OD257368/2024-2025:Supply, conveyance, erection testing and commissioning of approved make 3 phase, 4 wire, 110 V ( L-L), -/1 A CT or -/5A CT with DLMS compliant, having RS 485 port of class 0.2 S class TOD meter in the existing meter box after submitting the test certificate from KSEB TMR Division, giving all connections etc. as required. (excluding testing fees)

OD257370/2024-2025:Supply, conveyance, erection testing and commissioning of approved make 11 KV, out door metering CT PT unit wit 3 CT ratio 10/5A to 50/5A 10/15 VA, class 0.2 S class and PT ratio 11 KV/110 V , 25 VA, class 0.2 class , suitable for 3 phase 4 wire system of metering (the unit shall be tested in KSEB TMR division and test certificate should be submitted before installation) erecting the same in cross arm channel support with all standard accessories, giving connections as required. including conveyance charges to & fro for testing , after dismantling the damaged one

1.17.20:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm

OD257369/2024-2025:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armored copper control cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 10 core 2.5 sq mm with factory made clamp

OD257374/2024-2025:Supply,Errection, testing and commissioning of 3 phase 4 wire screw type test terminal block for interconntion.

OD257373/2024-2025:Supply, conveyance, fitting and commissioning of approved make 11 KV,400 Amps, out door type gang operated, Polymer type Air Break triple pole switch with all necessary accessories including adequate length of GI pipe as operating lever, operating handle with insulation and locking arrangements on suitable height, with necessary clamps, nut, bolt, washer etc. as required.

OD257372/2024-2025:Supply, conveyance, fitting and commissioning of approved make 11 KV, Drop Out Fuse Unit (set of 3nos) with all standard accessories GI / MS channel, properly fixing on cross arm including giving connections etc. as required.

OD258397/2024-2025:Charges for filtering the transformer oil reconditioning the same for getting appropriate dielectric strength

OD258428/2024-2025:charges for testing TODmeter,CT/PT units and getting certificate from KSEB TMR division ( actual amount will be paid on submitting original bill)

OD258474/2024-2025:Supply and filling of Transformer oil of good quality to the transformer/Starter/regulator etc as required

HT Maintenance work at various LIS

OD257378/2024-2025: Isolating the 400 KVA Transformer from HT Line after taking permission from KSEB authorities, Earthing the HT Terminals of the transformer, using earthing chain, and taking all safety measures, Scrapping, cleaning the surface of the transformer, painting the surface with enamel paint, over a coat of zinc rich primer as per the direction of the departmental officers at site.

OD257375/2024-2025: Isolating the HT 4 pole structure, after Earthing the HT Terminals using earthing chain, and taking all safety measures, Scrapping, cleaning the surface of the all metal poles, supporting members,Yard fencing structures, etc cleaning the surfaces, painting with 2 coats of enamel paint, over a coat of zinc rich primer as per the direction of the departmental officers at site.

OD257376/2024-2025:Isolating the 11 kV supply to the 4 pole structure, earthing using earthing chain, taking all safety measures, attending Minor repairs to the electrical connections of the 11 KV four pole structure such as correcting loose connections in the jumpers, lead wires re arrangement of the existing accessories including using necessary copper wires of adequate size, overall inspection of HT and LT connections ,attending petty repairs at jumper connections ,insulators, lightning arrestors D.O fuses replacing nuts and bolts if any where ever necessory on the 4 ploe structure and correcting the system in good condition

OD257377/2024-2025:cutting and removing the grass / bushes/ creeping plants in the transformer yard, and dumping them in convenient place and cleaning the yard from all other vegetation growth as per the direction of departmental staff at site

13.10:Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required

13.11:Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.

14.8:Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.

OD257380/2024-2025:Supply & Providing Silica gel breather for transformer

4 Pole HT Structure at Pambakkuda Lift

OD286869/2024-2025:Supply and erection of two pole structure consisting of 2 nos 11 mtrs long 175x85 RSJ poles and fixing the pole excluding excavation of trench and providing PCC of 1:3:6 mm of 40mm metal at bottom and RCC 1:2:4 of 20 mm metal at top with size 600x600x1980 mm and neatly plaster over the earth portion of plinth and neatly painted the pole with 2 coat aluminium paint over a coat of primer as required

OD258548/2024-2025:Supply and fixing of channel iron 100mm X 50 mm X 6 mm (9.56 kg per metre) for placing and fixing CT-PT unit / ABS/ Lightning arrestor using suitable size bolt and nuts , paintin 2 coat epoxy paint over primer, as per directions of departmental officers

POZITIVE POWER INDIA PVT LTD (BID ID -2214708)

Bidder Name

Kittu Electricals private limited

POZITIVE POWER INDIA PVT LTD