PROVN OF TOILET BLOCK AT CHANDERBANI TRG AREA, PROVN OF SINK, KITCHEN SLAB AND ASSOCIATED WORK IN TCP LINE AND ADDN/ ALTN OF RE-WIRING OF BLDG NO. CAMP 23/4 BK- 15 AT CLEMENT TOWN, DEHRADUN

Amount

Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth in any type of soil for foundation, etc or for shafts, wells, cesspits, manholes, pierholes, etc and getting out complete all as specified and directed.

Excavation over areas, n. exc 1.5m deep and getting out in any type of soil complete all as specified and directed.

Excavation over areas, exc 1.5m deep but n. exc 3m deep and getting out in any type ofsoil complete all as specified and directed.

M&L for returning filling in any type of soil including spreading levelling watering and well ramming in layers n. exc 25cm thick complete all as specified and directed.

M&L for removing excavated material (Soils) to a distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed.

M&L Cement concrete (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in foundations or mass concrete complete all as specified and as directed.

M&L for nominal mix RCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for nominal mix RCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for nominal mix RCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for nominal mix RCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L formwork for rough finished surface of flat surface to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and directed.

M&L formwork for rough finished surface of square, rectangular or triangular surface to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L formwork for rough finished surface of flat surface to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc also splays between floors and beams, etc complete all as specified and directed.

M&L formwork for rough finished surface of flat surface to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L formwork rough finished surface of concrete to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n. exc 20 cm wide complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed.

M&L for half brick work with sub class 'B' old size bricks straight or curved on plan to any radius built in CM (1:4) complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No.19 here-in-before but 5mm dia and over upto and including 10 mm dia as in Binders, stirrups, spacer complete all as specified and directed.

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick grade-4 (square/ rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm (400x400mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces 250x375x 7mm/ 300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar (1:4) complete all as specified and directed.

M&L for 15mm thick plaster in CM (1:6) on fair face of brick walls finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of interior acrylic distemper including a coat of primer of approved tint over a coat of wall care putty to make the surface smooth complete all as specified and directed.

M&L for 15mm thick plaster in CM (1:4) on fair face of brick walls finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of cement base paint after preparation of newly plastered/concrete surfaces over alkali resistant primer on wall including preparation of surfaces complete all as specified and directed.

M&L for 5mm thick plaster in ceiling of CM (1:3) on brick walls finished even and smooth without using extra cement complete all as specified and directed.

M&L for prepration of new plastered surface and applying three coat of white wash on ceiling complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B1 (Using 20mm graded crushed stone aggregate) as in sub base/floor finish complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C2 (Using 40mm graded crushed stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and smooth complete including filling the joints with mastic compound complete all as specified and directed.

M&L for plain cement concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in surface channel or drain or benching in manhole complete all as specified and directed.

M&L for PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in coping including necessary form work complete all as specified and directed.

M&L for precast cement concrete (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in manhole covers set in CM (1:4) complete all as specified and directed.

S&F steel ventilators with top hung shutter including hinges, steel peg stay, complete but with glazing bars, dovetailed or welded complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality pin headed type and glazing with oil putty or fixed with cut and mitred beads in squares or triangular n. exc 0.5 Sqm in each pane complete all as specified and directed.

S&F steel ventilators with top hung shutter including hinges, steel peg stay, complete but without glazing bars, dovetailed or welded complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire staples complete all as specifed and directed

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works conforming to Fe-290, Gde-E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm both side prelam PVC sheet and edges will be painted to match with the prelam sheet reinforced with MS square tube in opening incl necessary fixing arrangements as per specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail and bottom rail on either side as gap insert for top rails, bottom rail, panelling of both side prelam PVC sheet to be fitting in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification and drawing.

S&F 100mm size mild steel butt hinges medium weight ISI marked, cold rolled complete all as specified and directed.

S&F 150mm aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F triple layered rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed.

S&F 20 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete all as specified and directed.

S&F 25 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete all as specified and directed.

S&F 20mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified and directed.

S&F 25mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified and directed.

S&F 15 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete all as specified and directed.

S&F 15mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified and directed.

S&F vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed.

S&F PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed.

S&F vitreous china white wash hand basin flat back of size 550x400mm including CI/MS brackets including cutting for and pinning in brackets but including waste pipe complete all as specified and directed.

M&L vitreous China urinals,half stall type complete including waste coupling, waste pipe and steel spreader, providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F 20 mm dia brass stainless steel tubular towel rail D type 600mm long complete all as specified and directed.

S&F 15mm dia brass chromium plated Bib tap long body fancy type with wall flange complete all as specified and directed.

M&L for cutting existing steel tubing formalternation or addition of 50mm size complete all as specified and as directed.

M&L for road cutting for laying of pipe exceeding 500 Sqcm & not exc 1000 Sqcm cross sectional area and making good with PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) complete all as specified and directed.

S&F 15mm dia brass chromium plated pillar tap with long swan neck with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified and directed.

S&F 15mm Stop valve angle cock fancy type, chromium plated with long shunk and cup high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F chromium plated brass shower roses with or without swivel joints 125mm size including shower arm complete all as specified and directed.

S&F PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified and directed.

M&L 100mm dia cast iron soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and directed.

S&F cast iron 'P' Traps 100mm bore complete all as specified and directed.

M&L 75mm dia cast iron soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and directed.

S&F 75mm dia CI bend with oval access door (any radius) diminishing pieces or tapers as required complete all as specified and directed.

S&F cast iron floor trap with grating including jointing waste pipe in runlead 75mm dia fixed in cement concrete type B1 (1:2:4) and SS gratings complete all as specified and directed.

S&F Cast iron cowls 75mm complete all as specified and directed.

S&F 150mm internal dia of pipe salt glazed stoneware drain pipes grade 'A', laid in trenches and jointed in CM (1:1) complete all as specified and directed.

M&L for concrete bed in PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in bed with thickness of bed below the barrel of pipe as 100mm thick and width of bed as 480mm to sewage pipes of 150mm internal dia including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8) type D2 (Using 40mm graded crushed stone aggregate) as in path finish sub-base in floor/paving the top surfaces even and rough to receive top layer complete all as specified and directed.

M&L for chequered cement concrete tiles of size 20cm X 20cm X 25mm thick with grey cement and pigments set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

S&F of sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x160mm complete all as specified and directed.

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) over and including 25mm thick cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in floor finished rough to receive floor/screed complete all as specified and directed.

S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F PVC (SWR) floor trap with grating including jointing with solvent cement to waste pipe in run lead with dia of outlet 75mm complete all as specified and directed.

Supply only flush pipe of polyethylene flexible of low or high density or PVC, 32mm dia, for wash hand basin, sink complete all as specified and directed.

M&L Baroda green marble 14 -16 mm thick (table rubbed and polished ) in step, jambs, pillers, window cills, cooking plateforms and the like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble including half round moulding and making hole for gas pipe over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

Dismantling and taking down carefully U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed.

Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked surface/ concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface,provision of CI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) as earth wire connected with main common earth dolly complete all as specified and directed for the following :-

One light/fan/bell/exhaust fan point controlled by one, one-way Piano type switch 5/6 Amp complete all as specified and directed.

One 3pin/5pin 5/6 Amps socket out let on same board with other switches, with cables 1.5 sq mm size complete all specified and directed.

One 3pin/5pin 5/6 Amps socket out let on independent board with other switches with cables 1.5 sq mm size complete all specified and directed .

All as per item No 82 above but with 2.5 Sqmm PVC insulated cable (FRLS ) for 15 Amps power point complete all as specified and directed.

Supply and fixing switch piano flush type single pole, one-way 5/6 Amps, 240 Volts AC complete all as specified and directed.

Supply and fixing switch piano flush single pole, one-way 16 Amp, 240 Volts AC complete all as specified and directed.

Supply and fixing socket out let 5 pin 6 Amps flush type complete all as specified and directed.

Supply and fixing socket out let 5/6pin 5 Amp and 15 Amp flush type (multi) suitable for 240 Volt AC complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 65x25mm dia having three terminals complete all as specified and directed.

S & F batten/angle holder insulated body with back plate suitable for batten fitting complete all as specified and directed.

S& F in repair wall mounted LED batten Box type fitting Blue colour end caps pre-wired LED fitting all as per cat part No DMLN 1 LT 8-16 with & including LED T8 tubular lamp of Cat part No. LGT8-20-865-2 of make Cromption or equivalent make in Philips/ Havells as approved by GE.

S & F in repair LED building security light 25 watt LED with bracket complete all as specified and directed. Cat Part No LSTS-25 CDL of Crompton or equivalent make in Philips/ Havells/ Bajaj as approved by GE.

S&F in repair LED Recessed type full open 2X2 Tiles, Glare free uniformillumination with longer life and less maintenance Polaris-I, all as specified and directed. Cat part No. LCTLRNE - 36-FO-CDL of Crompton or equivalent make in Havells/Bajaj/Philips as approved by GE.

S&F single pole and neutral enclosure with a two pin and earth plug & socket complete with one, single pole MCB 20 Amps 10 KA repturing capacity 240 Volts AC complete all as specified and as directed.

S&F in repair stepped type electronic fan regulator flush socketed type all as specified and as directed.

S&F in repair exhaust fan plastic body 300mm sweep complete with all fittings complete all as specified and as directed.

M&L CI bend 100mm dia with oval access door/ diminishing piece complete all as specified and directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

ANKIT KUMAR

M.K Engineers

Nanda Brothers