MISC REPAIR AND REPAINTING TO STEEL FURNITURE UNDER GE MISSAMARI

Amount

ALMIRAH STEEL MED (FD-1032) M&L for SHELF made of 1.0mm thick Mild Steel Sheet of ALMIRAH STEEL MED made to shape and size as shown in Drawing No. FD-1032, including removal of unserviceable Shelf, complete all as specified and as directed.

All as per Item No. 1 but for SIDES of ALMIRAH STEEL MED.

All as per Item No. 1 but for BACK of ALMIRAH STEEL MED.

All as per Item No. 1 but for TOP/BOTTOM of ALMIRAH STEEL MED.

All as per Item No. 1 but for SHUTTER of ALMIRAH STEEL MED.

All as per Item No. 1 but for STUD of SHUTTER of ALMIRAH STEEL MED.

M & L for removing old worn out 3 way Locking Device from Almirah medium steel and S&F of new one of best quality. Rest all as specified in Drg FD-1032 and as directed by Engr-in-Charge.

M&L for Mild Steel HINGE (as approved) 75mm in size suitable for ALMIRAH STEEL MED fixed to Almirah as shown in Drawing No. FD-1032 including removal of unserviceable Hinge, complete all as specified and as directed.

M&L for removing old worn out Leg from the Almirah steel med and S&F of new leg made out of 1 mm thick MS Sheet . Rest all as specified in drg and as directed by Engr in Charge.

M&L for removing old worn out lock from the Almirah med steel, Supply and fixing of new lock (ISI Marked). Rest all as specified in drg and as directed by Engr in Charge.

M&L for removing old worn out handle from the Almirah med steel , supply and fixing of new CP handle 100mm long of best quality . Rest all as specified in drg and as directed by Engr in Charge.

M&L for repair to ALMIRAH STEEL MED by neccesary finishing to deshaped portions and greasing to hinges, handles and locking systems, complete all as specified and directed and Rest all as shown in Drg.

M&L for spot welding at the joints of ALMIRAH STEEL MED that have become loose as shown in Drawing No.- FD-1032, rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to ALMIRAH MED STEEL (Drawing No. FD-1032), complete all as specified and as directed.

ALMIRAH LARGE STEEL (FD-1031) M&L for SHELF made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD-1031, including taking out unserviceable Shelf, complete all as specified and as directed.

All as per Item No. 15 but for SIDES of ALMIRAH LARGE STEEL.

All as per Item No. 15 but for BACK of ALMIRAH LARGE STEEL.

All as per Item No. 15 but for TOP/BOTTOM of ALMIRAH LARGE STEEL.

All as per Item No. 15 but for SHUTTER of ALMIRAH LARGE STEEL.

All as per Item No. 15 but for STUD of SHUTTER of ALMIRAH LARGE STEEL.

M & L for removing old worn out 3-way Locking Device from the Almirah Large steel and S&F of new one of best quality. Rest all as specified in drg FD-1031 and as directed by Engr in Charge.

M&L for Mild Steel HINGE (as approved) 75mm in size suitable for ALMIRAH LARGE STEEL and fixing to Almirah as shown in Drawing No. FD-1031 including taking out unserviceable Hinge, complete all as specified and as directed.

All as per Item No. 15 but for LEG of ALMIRAH LARGE STEEL.

M&L for removing old worn out LOCK from the Almirah med steel, Supply and fixing of new lock (ISI Marked). Rest all as specified on drg and as directed by Engr in Charge.

M&L for Mild Steel HANDLE of best quality of 100 mm long(as approved) of ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD-1031 including taking out unserviceable Handle, complete all as specified and as directed.

M&L for repair to ALMIRAH STEEL LARGE by neccesary finishing to deshaped portions and greasing to hinges, handles and locking systems, complete all as specified and directed and Rest all as shown in Drg.

M&L for spot welding at the joints of ALMIRAH STEEL LARGE that have become loose as shown in Drawing No.- FD-1031, rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to ALMIRAH LARGE STEEL (Drawing No. FD-1031), complete all as specified and as directed.

ALMIRAH LARGE STEEL MAP (FD/E6/MAP/18) M&L for SHELF made of 20 Gauge Mild Steel Sheet of ALMIRAH LARGE STEEL MAP, made to shape and size as shown in Drawing No.- FD/E6/MAP/18, including removal of unserviceable shelf, complete all as specified and as directed by Engr-in-charge.

All as per Item No. 29, but for existing pattern SHUTTER of ALMIRAH LARGE STEEL MAP.

All as per Item No. 29, but for TOP/BOTTOM of ALMIRAH LARGE STEEL MAP.

All as per Item No. 29, but for SIDES of ALMIRAH LARGE STEEL MAP.

All as per Item No. 29, but for LOCKER of ALMIRAH LARGE STEEL MAP.

All as per Item No. 29, but for DRAWER of ALMIRAH LARGE STEEL MAP.

All as per Item No. 29 here in before but for BASE of ALMIRAH LARGE STEEL MAP.

All as per Item No. 29, but for BACK of ALMIRAH LARGE STEEL MAP made of 22 Gauge Mild Steel Sheet.

M & L for removing old worn out locking arrangement from the Almirah Large Steel MAP and fixing of new one of existing pattern of approved quality. Rest all as specified in Drawing No.- FD/E6/MAP/18 and as directed by Engr-in-Charge.

All as per Item No. 37, but for 75mm HINGES of ALMIRAH LARGE STEEL MAP.

All as per Item No. 37, but for locking arrangement of LOCKER of ALMIRAH LARGE STEEL MAP.

All as per Item No. 37, but for HANDLE of ALMIRAH LARGE STEEL MAP.

All as per Item No. 37, but for HANDLE of Locker and Drawer of ALMIRAH LARGE STEEL MAP.

All as per Item No. 37, but for 20mm dia CP Conduite Pipe as HANGER for ALMIRAH LARGE STEEL MAP.

M&L for repair to ALMIRAH STEEL LARGE MAP by neccesary finishing to deshaped portions and greasing to hinges, handles and locking systems, complete all as specified and directed and Rest all as shown in Drg.

M&L for spot welding at the joints of ALMIRAH LARGE STEEL MAP that have become loose as shown in Drawing No.- FD/E6/MAP/18, rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to ALMIRAH LARGE STEEL MAP (Drawing No.- FD/E6/MAP/18), complete all as specified and as directed.

BOOK CASE STEEL (FD-1028) M&L for SHELF made of 1 mm thick Mild Steel Sheet of BOOK CASE STEEL, made to shape and size as shown in Drawing No.- FD-1028, including removal of unserviceable shelf, complete all as specified and as directed by Engr-in-charge.

All as per Item No. 46, but for TOP of BOOK CASE STEEL.

All as per Item No. 46, but for BOTTOM of BOOK CASE STEEL incl 1 mm th MS Sheet extra piece welded to sheet cover at bottom front.

All as per Item No. 46, but for SIDES of BOOK CASE STEEL.

All as per Item No. 46, but for BACK of BOOK CASE STEEL.

M&L for movable SHUTTER made of 1 mm thick Mild Steel Sheet of BOOK CASE STEEL incl 1.25mm th MS channel as guide rail, MS Rod hook and wheel for movable arrangement, made to shape and size as shown in Drawing No.- FD-1028, including removal of unserviceable one, complete all as specified and as directed by Engr-in-charge.

M&L for 3 mm th GLASS PANE of appvd make and quality for SHUTTER of BOOK CASE STEEL, including removal of unserviceable one, complete all as specified and as directed by Engr-in-charge.

M&L for LOCK of appvd make and quality for SHUTTER of BOOK CASE STEEL, including removal of unserviceable one, complete all as specified and as directed by Engr-in-charge.

M&L for CP HANDLE of appvd make and quality for SHUTTER of BOOK CASE STEEL, including removal of unserviceable one, complete all as specified and as directed by Engr-in-charge.

M&L for repair to BOOK CASE STEEL by neccesary finishing to deshaped portions and greasing to hinges, handles and locking systems, complete all as specified and directed and Rest all as shown in Drg.

M&L for spot welding at the joints of BOOK CASE STEEL that have become loose as shown in Drawing No.- FD-1028, rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to BOOK CASE STEEL (Drawing No.- FD-1028), complete all as specified and as directed.

FORM WITH OUT BACK (FD-1027) M&L for LEG made of 25mm sq MS tube of 1.6 mm thick Mild Steel Sheet of FORM WITH OUT BACK, made to shape and size as shown in Drawing No.- FD-1027, including removal of unserviceable one, complete all as specified and as directed by Engr-in-charge.

All as per Item No. 58, but for LONG STIFFENER supporting seat of FORM WITH OUT BACK with 3 Nos screws for fixing it to the seat.

All as per Item No. 58, but for SHORT STIFFENER between legs of FORM WITH OUT BACK.

M&L for SEAT of FORM WITH OUT BACK made of 25mm thick wooden scantling of 1st class hard wood (Teak Wood) with teak wood beading alround, french polished wherever necessary, made to shape and size as shown in Drawing No.- FD-1027, including removal of unserviceable one, complete all as specified and as directed by Engr-in-charge.

S&F of HARD RUBBER SHOE of superior quality (as approved) fixed to Leg of FORM WITH OUT BACK as shown in Drawing No. FD-1027, including removal of unserviceable shoe, complete all as specified and as directed.

M&L for spot welding at the joints of FORM WITH OUT BACK that have become loose as shown in Drawing No.- FD-1027, rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to FORM WITH OUT BACK (Drawing No. FD-1027), complete all as specified and as directed.

LADDER FOR LOFT (FD-238) M&L for STRINGER made of 25mm dia Conduit Pipe of 1.6 mm thick Mild Steel Sheet of LADDER FOR LOFT, made to shape and size as shown in Drawing No.- FD-238, including removal of unserviceable one, complete all as specified and as directed by Engr-in-charge.

All as per Item No. 65, but for RUNGS welded to Stringers of LADDER FOR LOFT.

S&F of HARD RUBBER SHOE of superior quality (as approved) fixed to Stringers of LADDER FOR LOFT as shown in Drawing No. FD-238, including removal of unserviceable shoe, complete all as specified and as directed.

M&L for spot welding at the joints of LADDER FOR LOFT that have become loose as shown in Drawing No.- FD-238, rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to LADDER FOR LOFT (Drawing No. FD-238), complete all as specified and as directed.

RACK SIDE STEEL 4 SPACE (FD-1023) M&L for LEG made of 40X40X3 Iron Angle, made to shape and size as shown in Drawing No.- FD-1023, including removal of unserviceable one, complete all as specified and as directed by Engr-in-charge.

All as per Item No. 70 but for SHELF made of 1 mm thick Mild Steel Sheet of RACK SIDE STEEL 4 SPACE

All as per Item No. 70 but for Nominal TRAY PARTITION made of 1 mm thick Mild Steel Sheet of RACK SIDE STEEL 4 SPACE

M&L for repair to RACK SIDE STEEL 4 SPACE by neccesary finishing to deshaped portions and greasing to hinges, handles and locking systems, complete all as specified and directed and Rest all as shown in Drg.

M&L for spot welding at the joints of RACK SIDE STEEL 4 SPACE that have become loose as shown in Drawing No.- FD-1023, rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to RACK SIDE STEEL 4 SPACE (Drawing No. FD-1023), complete all as specified and as directed.

RACK SIDE STEEL 3 SPACE (FD-1023) M&L for LEG made of 40X40X3 Iron Angle, made to shape and size as shown in Drawing No.- FD-1023, including removal of unserviceable one, complete all as specified and as directed by Engr-in-charge.

All as per Item No. 76 but for SHELF made of 1 mm thick Mild Steel Sheet of RACK SIDE STEEL 3 SPACE

All as per Item No. 76 but for Nominal TRAY PARTITION made of 1 mm thick Mild Steel Sheet of RACK SIDE STEEL 3 SPACE

M&L for repair to RACK SIDE STEEL 3 SPACE by neccesary finishing to deshaped portions and greasing to hinges, handles and locking systems, complete all as specified and directed and Rest all as shown in Drg.

M&L for spot welding at the joints of RACK SIDE STEEL 3 SPACE that have become loose as shown in Drawing No.- FD-1023, rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to RACK SIDE STEEL 3 SPACE (Drawing No. FD-1023), complete all as specified and as directed.

RACK STEEL 6 SHELVES (FD-1038) M&L for LEG made of 40X40X4 Iron Angle, made to shape and size as shown in Drawing No.- FD-1038, including removal of unserviceable one, complete all as specified and as directed by Engr-in-charge.

All as per Item No. 82 but for SHELF made of 1 mm thick Mild Steel Sheet of RACK STEEL 6 SHELVES

M&L for repair to RACK STEEL 6 SHELVES by neccesary finishing to deshaped portions and greasing to hinges, handles and locking systems, complete all as specified and directed and Rest all as shown in Drg.

M&L for spot welding at the joints of RACK STEEL 6 SHELVES that have become loose as shown in Drawing No.- FD-1038, rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to RACK STEEL 6 SHELVES (Drawing No. FD-1038), complete all as specified and as directed.

BOOK SHELF OPEN LARGE STEEL (FD-69(M)) M&L for LEG made of 40X40X4 Iron Angle, made to shape and size as shown in Drawing No.- FD-69(M), including removal of unserviceable one, complete all as specified and as directed by Engr-in-charge.

All as per Item No. 87 but for SHELF made of 1 mm thick Mild Steel Sheet of BOOK SHELF OPEN LARGE STEEL

All as per Item No. 87 but for SIDES made of 1 mm thick Mild Steel Sheet of BOOK SHELF OPEN LARGE STEEL

All as per Item No. 87 but for BACK made of 1 mm thick Mild Steel Sheet of BOOK SHELF OPEN LARGE STEEL

All as per Item No. 87 but for 75X75X3 FI CUT welded to BOOK SHELF OPEN LARGE STEEL

M&L for repair to BOOK SHELF OPEN LARGE STEEL by neccesary finishing to deshaped portions and greasing to hinges, handles and locking systems, complete all as specified and directed and Rest all as shown in Drg.

M&L for spot welding at the joints of BOOK SHELF OPEN LARGE STEEL that have become loose as shown in Drawing No.- FD-69(M), rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to BOOK SHELF OPEN LARGE STEEL (Drawing No. 69(M)), complete all as specified and as directed.

BENCH WORKSHOP TYPE 'A' (1500X900) STEEL (FD-1024) M&L for LEG made of 32mm Square MS tube of 1.6 mm thick Mild Steel Sheet of BENCH WORKSHOP TYPE 'A', made to shape and size as shown in Drawing No.- FD-1024, including removal of unserviceable one, complete all as specified and as directed by Engr-in-charge.

All as per Item No. 95, but for LONG STIFFENER of BENCH WORKSHOP TYPE 'A'.

All as per Item No. 95, but for SHORT STIFFENER of BENCH WORKSHOP TYPE 'A'.

All as per Item No. 95, but for LONG RAIL of BENCH WORKSHOP TYPE 'A'.

All as per Item No. 95, but for SHORT RAIL of BENCH WORKSHOP TYPE 'A'.

M&L for TOP of BENCH WORKSHOP TYPE 'A' made of 40mm thick 2nd class hard wood, french polished, made to shape and size as shown in Drawing No.- FD-1024, including removal of unserviceable one, complete all as specified and as directed by Engr-in-charge.

M&L for DRAWER made of 1 mm thick Mild Steel Sheet of BENCH WORKSHOP TYPE 'A' with bearers, made to shape and size as shown in Drawing No.- FD-1024, including removal of unserviceable one, complete all as specified and as directed by Engr-in-charge.

S&F of HARD RUBBER SHOE of superior quality (as approved) fixed to Leg of BENCH WORKSHOP TYPE 'A' as shown in Drawing No. FD-1024, including removal of unserviceable shoe, complete all as specified and as directed.

M&L for spot welding at the joints of BENCH WORKSHOP TYPE 'A' that have become loose as shown in Drawing No.- FD-1024, rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to BENCH WORKSHOP TYPE 'A' (Drawing No. FD-1024), complete all as specified and as directed.

CHAIR VERANDAH (FD-256/359) Taking down wom out plastic cane from Seat and Back of Chair Verandah and Re-caning with 4 mm wide half-round oval shape plastic cane to the frame. Make : Ajay/Maharashtra/aryan or equivalent .Rest All as shown and specified in Drg No. FD-256/359 and as directed.

Supply and fix HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR VERANDAH as shown on Drawing No. FD-259, FD-256 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for removal of old unsv leg of CHAIR VERANDAH and fixing of new one made of 20mm dia conduit pipe of 1.6mm thick MS as shown in Drawing No.- FD-259,FD-256, complete all as specified and as directed.

Same as item No.- 107, but for Seat & Back Frame of CHAIR VERANDAH (Drawing No.- FD-259,FD-256).

M&L for spot welding at the joints of CHAIR VERANDAH that have become loose as shown in Drawing No.- FD-259,FD-256, rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to Steel Frame of CHAIR VERANDAH (Drawing No. FD-259, FD-256), complete all as specified and as directed.

LOCKER BED SIDE STEEL (FD-1029) M&L for SHELF made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-1029, complete all as specified and as directed.

All as per Item No. 111 but for DOOR SHUTTER of LOCKER BED SIDE STEEL.

All as per Item No. 111 but for SIDES of LOCKER BED SIDE STEEL.

All as per Item No. 111 but for BACK of LOCKER BED SIDE STEEL.

All as per Item No. 111 but for TOP/BOTTOM of LOCKER BED SIDE STEEL.

M&L for Mild Steel HINGE (as approved) 50mm in size suitable for LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-1029 including taking out unserviceable Hinge, complete all as specified and as directed.

All as per Item No. 111 but for LEG of LOCKER BED SIDE STEEL.

M&L for CP Steel HANDLE of best quality 100mm long (as approved) of LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-1029 including taking out unserviceable Handle, complete all as specified and as directed.

S&F new CP Steel Hasp and Staple 75mm long of best quality including removing old worn out Hasp & Staple from the Locker Bed Side Steel as shown on Drawing No. FD-1029, complete all as specified and as directed.

M/L for removing old U/S hanging rod from Locker Bed Side Steel and S&F new stainless steel rod 20mm dia 1.6mm thick of the existing of approved quality as shown on Drawing No. FD-1029. Rest all as directed and as specified.

M&L for repair to LOCKER BED SIDE STEEL by neccesary finishing to deshaped portions and greasing to hinges, handles and locking systems, complete all as specified and directed and Rest all as shown in Drg.

M&L for spot welding at the joints of LOCKER BED SIDE STEEL that have become loose as shown in Drawing No.- FD-1029, rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to LOCKER BED SIDE STEEL (Drawing No. FD-1029), complete all as specified and as directed.

CHAIR CB STEEL WITH ARMS ( FD-75(M)) M&L for SEAT FRAME made out of Second Class Hardwood of CHAIR CBA STEEL WITH ARMS, fixed with 4 No. of Machine Screw 75x3 mm and Polishing with Black Colour (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3 mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Seat Frame, complete all as specified and as directed.

All as per Item No. 124 but fot for BACK FRAME of CHAIR CBA STEEL WITH ARMS.

M&L for removal of old unsv leg of CHAIR CBA STEEL WITH ARMS and fixing of new one made of 20mm dia conduit pipe of 1.6mm thick MS as shown in Drawing No.- FD-75(M), complete all as specified and as directed.

Supply and Fix PVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Cap, complete all as specified and as directed.

M&L for Mild Steel Flat Iron 25x3 mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CBA STEEL WITH ARMS size 35x25x3 mm, as shown on Drawing No. FD-75(M) including taking out unserviceable Runner, complete all as specified and as directed.

Supply and Fix HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CBA STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for spot welding at the joints of CHAIR CBA STEEL WITH ARMS that have become loose as shown in Drawing No.- FD-75(M), rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to Steel Frame of CHAIR CBA STEEL WITH ARMS (Drawing No. FD-75(M)), complete all as specified and as directed.

M&L for ARMS REST made out of Second Class Hardwood of CHAIR CBA STEEL WITH ARMS, fixed with suitable size Screws and Polishing with Black Colour (as approved) on Back Frame as shown in Drawing No. FD-75(M) including taking out unserviceable Arms Rest, complete all as specified and as directed.

CHAIR CB STEEL W/O ARMS ( FD-75(M)) M&L for SEAT FRAME made out of Second Class Hardwood of CHAIR CB STEEL W/O ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Polishing with Black Colour Synthetic Enamelled Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Seat Frame, complete all as specified and as directed.

All as per Item No. 133 but for BACK FRAME of CHAIR CBA STEEL W/O ARMS.

Supply and Fix PVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL W/O ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Cap, complete all as specified and as directed.

M&L for Mild Steel Flat Iron 25x3.0 mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CBA STEEL W/O ARMS size 35x25x3 mm, as shown on Drawing No. FD-75(M) including taking out unserviceable Runner, complete all as specified and as directed

M&L for removal of old unsv leg of CHAIR CBA STEEL W/O ARMS and fixing of new one made of 20mm dia conduit pipe of 1.6mm thick MS as shown in Drawing No.- FD-75(M), complete all as specified and as directed.

Supply and Fix HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CBA STEEL W/O ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for spot welding at the joints of CHAIR CBA STEEL W/O ARMS that have become loose as shown in Drawing No.- FD-75(M), rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to Steel Frame of CHAIR CBA STEEL WITHOUT ARMS (Drawing No. FD-75(M)), complete all as specified and as directed.

CHAIR COMPUTER MAP (FD/E6/MAP/01) M&L for TAPESTRY/FABRIC CLOTH after providing a layer of SYNTHETIC FOAM 25mm thick (as approved) for SEAT/BACK of CHAIR COMPUTER as shown on Drawing No. FD/E6/MAP/01 including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed.

M&L for CASTOR WHEEL (as approved) of CHAIR COMPUTERas shown in Drawing No. FD/E6/MAP/01 including taking out unserviceable or broken Castor Wheel from Chairs, complete all as specified and as directed.

M&L for HANDLE (as approved) of CHAIR COMPUTER as shown in Drawing No. FD/E6/MAP/01 including taking out unserviceable or broken HANDLE from Chairs, complete all as specified and as directed.

M&L for SEAT (as approved) of CHAIR COMPUTER as shown in Drawing No. /FD/E6/MAP/01 including taking out unserviceable Bottom Base from Chairs, complete all as specified and as directed.

M&L for GAS LIFTING HYDRAULIC SYSTEM of CHAIR COMPUTERas shown in Drawing No. FD/E6/MAP/01 including taking out unserviceable Gas Lifting Hydrolic System from Chairs, complete all as specified and as directed.

M&L for BOTTOM FRAME (as approved) of CHAIR COMPUTER as shown in Drawing No. /FD/E6/MAP/01 including taking out unserviceable Bottom Base from Chairs, complete all as specified and as directed.

TABLE BEDSIDE STEEL MAP (FD/E6/MAP/15R) MSL for Top/Side (Size of Top 450mmX450mm) made out of decorative Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 6.0 mm thick all round, duly polished to match shade of the top of TABLE BED SIDE STEEL MAP and made to shape and size as shown on Drawing No. FD/E6/MAP/15R complete all as specified and as directed.

M&L Back made out of 12mm thick Plywood, BWR Grade of TABLE BED SIDE STEEL MAP as shown on Drawing No. FD/E6/MAP/15R complete all as specified and as directed.

M&L for CP HANDLE 75mm long(as approved) of TABLE BED SIDE STEEL MAP and fixing as shown on Drawing No. FD/E6/MAP/15R including taking out unserviceable knob, complete all as specified and as directed.

M&L for Mild Steel Square Pipe of size 18mm (as required) for TABLE BED SIDE STEEL MAP and fixing as shown on Drawing No. FD/E6/MAP/15R including taking out unserviceable pipe, complete all as specified and as directed.

M&L for spot welding at the joints of TABLE BED SIDE STEEL MAP that have become loose as shown as shown in Drawing No.- FD/E6/MAP/15R, rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to Steel Frame of TABLE BED SIDE STEEL MAP (FD/E6/MAP/15R), complete all as specified and as directed.

TEAPOY VERANDAH MAP (FD/E6/MAP/17) M&L for taking down old U/S top and S&F new TOP of Teapoy Verandah MAP made up of 18mm thick MDF board . Exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 3.0 mm thick all round, applying french polish upto the desired finish on beading as shown on Drawing No. FD/E6/MAP/17 complete all as specified and as directed.

M&L Short STIFFENER made out of Mild Steel Pipe in the middle at 100 mm high from bottom of legs and fixing to Teapoy Verandah as shown on Drawing No. FD/E6/MAP/17, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unservice-able Stiffener, complete all as specified and as directed.

M&L for Long STIFFENER made out of Mild Steel Square Pipe of 20mm dia and wall thickness 1.6mm and fixing to Teapoy Verandah MAP as shown on Drawing No. FD/E6/MAP/17, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener, complete all as specified and as directed.

M&L for Leg made of Mild Steel Square Pipe of size 18 mm for Teapoy Verandah MAP as shown In Drawing No. FD/E6/MAP/17, complete all as specified and as directed.

M&L for Replacement of rubber shoe with new hard rubber shoe of superior quality as required at site complete all as shown in drawing and as specified and directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to Steel Frame of Teapoy Verandah MAP (FD/E6/MAP/17 ), complete all as specified and as directed.

CHAIR SCHOOL WITH HAND BOARD (FD/E6/MAP/05) M&L for TOP of Chair School with Hand Board for removing old U/S top and S&F new top of existing size made up of 18mm thick MDF board, Exterior grade ISI marked (MAKE : GREEN PLY / CENTURY), providing Teak Wood Beading all round, applying french polish upto the desired finish on beading as shown on Drawing No. FD/E6/MAP/05 complete all as specified and as directed.

M&L for removing unserviceable seat frame, S&F new seat fixed on conduit pipe as specified on drg and directed.

M & L for removing old worn out hinge from the Chair School with hand board and S&F new hinge of best quality. Rest all as specified on Drawing No. FD/E6/MAP/05 and as specified and directed.

M&L for broken legs with mild steel round pipe of size 25mm for chair School with Hand Board complete all as shown on Drawing No FD/E6/MAP/05.

M&L for spot welding at the joints of Chair School with hand board that have become loose as shown in Drawing No.- FD/E6/MAP/05, rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to Steel Frame of Chair School with hand board FD/E6/MAP/05 ), complete all as specified and as directed.

Supply and fix HARD RUBBER SHOE superior quality (as approved) fixed to Leg of Chair School with hand board as shown on Drawing No. FD/E6/MAP/05 including taking out unserviceable Shoe, complete all as specified and as directed.

RACK SHOE STEEL (FD/E6/MAP/02 (R)) M&L for replacement of old unsv Main Frame/Leg with new one made of Mild Steel Conduit Pipe of 25mm dia of 18 gauge thickness for Rack Shoe Steel as shown in Drawing No. FD/E6/MAP/02 (R) and complete all as specified and as directed.

All as per Item No. 166 but for 20mm dia MS pipe welded to legs of Rack Shoe Steel.

All as per Item No. 166 but for 3mm dia MS rod of Jali Frame Long sized welded to 20mm dia MS pipe of Rack Shoe Steel.

All as per Item No. 166 but for 3mm dia MS rod of Jali Frame Short sized welded 20mm dia MS pipe of Rack Shoe Steel.

M&L for spot welding at the joints of Rack Shoe Steel that have become loose as shown in Drawing No.- FD/E6/MAP/02 (R), rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to Rack Shoe Steel (Drawing No. FD/E6/MAP/02 (R)) by Spray Painting Machine, complete all as specified and as directed.

Supply and fix HARD RUBBER SHOE superior quality (as approved) fixed to Leg of Rack Shoe Steel as shown on Drawing No. FD/E6/MAP/02(R) including taking out unserviceable Shoe, complete all as specified and as directed.

ALMIRAH LARGE STEEL HALF HANGING AND HALF SHELVES (FD-1033) M&L for SHELF made out of 1.0mm thick Mild Steel Sheet of ALMIRAH Almirah large steel half hanging and half shelves made to shape and size as shown on Drawing No. FD-1033, including taking out unserviceable Shelf, complete all as specified and as directed.

All as per Item No. 173 but for DOOR of Almirah Large Steel half hanging and half shelves.(Drawing No. FD-1033)

M & L for removing old worn out 3 way locking device from the Almirah Large Steel half hanging and half shelves and S&F new locking device of best quality complete all as specified and directed and Rest all as specified in Drg FD-1033.

M&L for Mild Steel HINGE (as approved) 75mm in size suitable for Almirah Large Steel half hanging and half shelves fixing to Almirah as shown on Drawing No. FD-1033 including taking out unserviceable Hinge, complete all as specified and as directed.

All as per Item No. 173 here in before but for LEG of Almirah Large Steel half hanging and half shelves as shown in Drawing No. FD-1033

M&L for removing old worn out lock from the Almirah Large Steel half hanging and half shelves, Supply and Fixing of new lock (ISI Marked) complete all as specified and directed and Rest all as specified on drg as shown on Drawing No. FD-1033.

M&L for Mild Steel HANDLE of best quality of 100 mm long (as approved) of Almirah Large Steel half hanging and half shelves and fixing to Almirah as shown in Drawing No. FD-1033 including taking out unserviceable Handle, complete all as specified and as directed.

M/L for removing old U/S hanging rod from above but Almirah Large Steel half hanging and half shelves and S&F new stainless steel rod 20mm dia 1.6mm thick of the existing length of approved quality complete all as specified and directed and Rest all as shown in Drg No. FD-1033.

M&L for repair to Almirah Large Steel half hanging and half shelves by neccesary finishing to deshaped portions and greasing to hinges, handles and locking systems, complete all as specified and directed and Rest all as shown in Drg No. FD-1033.

M&L for spot welding at the joints of Almirah large steel half hanging and half shelves that have become loose as shown in Drawing No.- FD-1033, rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to Almirah Large Steel half hanging and half shelves (Drawing No. FD-1033), complete all as specified and as directed.

TRESTLE STORE ROOM STEEL (FD-1043) M&L for 50mmx3mm FI Bracing at Top of Trestle Store Room Steel as shown in Drawing No. FD-1043, including removal of unsv one as specified and as directed.

M&L for 50mmx3mm FI Bracing at Sides of Trestle Store Room Steel as shown in Drawing No. FD-1043, including removal of unsv one as specified and as directed.

M&L for 50mmx3mm FI Bracing at Section of Trestle Store Room Steel as shown in Drawing No. FD-1043, including removal of unsv one as specified and as directed.

M&L for spot welding at the joints of Trestle Store Room Steel that have become loose as shown in Drawing No.- FD-1043, rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to Trestle Store Room Steel (Drawing No. FD-1043) by Spray Painting Machine, complete all as specified and as directed.

CHAIR WRITING MAP (FD/E6/MAP/12) M&L for TAPESTRY/FABRIC CLOTH after providing a layer of SYNTHETIC FOAM 25mm thick (as approved) for SEAT/BACK of Chair Writing MAP as shown in Drawing No. FD/E6/MAP/12 including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed.

M&L for removing old u/s polyurethane / PVC arms rest of Chair Writng MAP all types and S&F new polyurethane arms complete all as specified and directed and as shown on Drawing No. FD/E6/MAP/12.

M&L for Leg made of Mild Steel Tubular Pipe of section 25X10mm for Chair Writing MAP as shown In Drawing No. FD/E6/MAP/12, complete all as specified and as directed.

M/L for removing old u/s rubber stopper of Chair Writing MAP and S&F new Rubber Stopper as specified and directed and as shown in Drawing No. FD/E6/MAP/12.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to all exposed steel surfaces of Chair Writing MAP (Drg No. FD/E6/MAP/12), complete all as specified and directed.

TABLE COMPUTER MAP (FD/E6/MAP/03) M&L for TOP(Size 900mmX562mm) of TABLE COMPUTER of made out of Decorative Prelaminated MDF Board 18 mm thick, exterior grade ISI marked , providing Teak Wood Beading 6.0 mm thick all round as shown on Drawing No. FD/E6/MAP/03 including taking out unserviceable Top, complete all as specified and as directed.

M&L for KEYBOARD TRAY of TABLE COMPUTER made out of Decorative Prelaminated MDF Board 18 mm thick, exterior grade ISI marked , providing Teak Wood Beading 6.0 mm thick all round alongwith telescopic channels of best quality as shown on Drawing No. FD/E6/MAP/03 including taking out unserviceable Keyboard Tray, complete all as specified and as directed.

M&L for MOUSE TRAY of TABLE COMPUTER made out of Decorative Prelaminated MDF Board 18mm thick, exterior grade ISI marked, providing Teak Wood Beading 6.0 mm thick all round all round alongwith telescopic channels of best quality as shown on Drawing No. FD/E6/MAP/03 including taking out unserviceable MOUSE Tray, complete all as specified and as directed.

M&L for CPU STAND of TABLE COMPUTER made out of Decorative Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 6.0 mm thick all round all round alongwith telescopic channels of best quality as shown on Drawing No. TP/FD/E6/MAP/03 including taking out unserviceable CPU STAND, complete all as specified and as directed.

M&L for Leg made of Mild Steel Rctangle Pipe of section 25X50mm for TABLE COMPUTER MAP as shown In Drawing No. FD/E6/MAP/03, complete all as specified and as directed.

Supply and Fix rectangular PVC SHOE superior quality (as approved) fixing to TABLE COMPUTER as shown on Drawing No. FD/E6/MAP/03 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for spot welding at the joints of TABLE COMPUTER that have become loose as shown as shown in Drawing No.- FD/E6/MAP/03, rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper thereafter making smooth surface by application of Putty and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to TABLE COMPUTER (Drawing No. FD/E6/MAP/03), complete all as specified and as directed.

KIRAN REED INDUSTRIES

M/S K.K.TRADERS

M/S Singh Furniture Mart

M/S NARAYAN ENTERPRISE