Development of Muktanand Marg in Ward No.6 At Vapi Municipal Corporation.

Name of Work : Development of Muktanand Marg in Ward No.6 At Vapi Municipal Corporation.

Memorandum showing Items of Woks to be carried out

Item Quantities Item of Works Tendered Rates. Unit Total Amount According

Item Quantities Item of Works Tendered Rates. Unit Total Amount According

No. Estimated But In Figures In Words to estimated Quantity.

1 may be2 More 3 4 5 6

SUB ESTIMATE - 1 : BITUMINOUS ROAD

1 21813.75 Milling the Existing bituminous pavement for a depth more than 100 mm but upto ₹ 210.08 Rupees Two Hundred SqM ₹

200 mm by milling machine in double cutting depth to make a uniform surface Ten Paise Eight Only

without disturbing the base including diversion of traffic, removing milled

materials and disposal of milled materials to an approved dumping yard ( within

km Lead ) including loading and unloading, all leads and lifts, fuel, lubricant

charges, etc complete. 111 mm to 120 mm

2 6795.14 Box cutting the road surface to proper slope and camber for making a base for road ₹ 104.04 Rupees One Hundred CuM ₹

work including removing the excavated stuff and depositing on the road side slope Four Paise Four Only

as directed upto 50Mt.lead.

3 2265.05 Construction of Granular Sub Base by Providing Coarse Graded Machine crushed ₹ 809.09 Rupees Eight Hundred CuM ₹

B.T. Material Satisfying MORTH Specification of Grading II ( B.T. Stone Agreegate Nine Paise Nine Only

53 mm to 2.36 mm Below - 20% ) Including spreading in unifrom layer with motor

grade on prepared surface, mixing by mix in place method with rotovator at OMC

an COmpacting with Vibratory Roller to Achieve the desired density etc. complete.

4 2265.05 Providing, laying, spreading and compacting graded stone aggregate to wet mix ₹ 828.67 Rupees Eight Hundred CuM ₹

macadam of 150 mm thickness specification including premixing the Material with TwentyEight Paise

water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, SixtySeven Only

laying in uniform layers with paver in sub- base / base course on well prepared

surface with Plant Mix Method and compacting with vibratory roller to achieve the

desired density.

5 27877.50 Providing & Applying priming coat with emulsion at the rate of 7.50 kg/ 10 Sq. Mt. ₹ 65.34 Rupees SixtyFive Paise SqM ₹

including cost of asphalt and preparing the surface heating, and applying etc. ThirtyFour Only

6 2090.81 Providing & Laying bituminous base course 75 mm thick compacted in with tack ₹ 4,203.74 Rupees Four Thousand M.T. ₹

coat of ( VG - 40 ) at the rate of 2.5 Kg/100 Sq.M. and using B.T. stone agreegates Two Hundred Three

of required gradation and asphalt ( VG-40) grade for mixing @ 1.99% by weight of Paise SeventyFour Only

total mix including heating the aggregate and asphalt by drum mix plant and

spreadings the same by paver finisher and consolidation with vibratory roller

including providing all materials equipment, tools and plants, oil, kerosene,

firewood, labour charges etc. complete.

7 2299.89 Providing & Laying 37.5 mm thick compacted Bituminous Maccadam with B.T. ₹ 5,438.77 Rupees Five Thousand M.T. ₹

aggregate as per MORT&H specification and asphalt grade VG-40 for tack coat at Four Hundred

2.5 Kg/10 Sqmt with mechanical sprayer and bitumen grade VG -40 for mixing at ThirtyEight Paise

the rate 34.0 Kg/M.T. i.e. 3.4% of total mix including heating the aggreagate and SeventySeven Only

asphalt by drum mix plant and spreading the same by censor paver finisher and

cosolidation with vibratory roller including providing all materials, equipments,

tools, and plants, oil, kerosene, fire wood, labour charges etc. complete.

8 1602.96 Providing & Laying 25 mm Thick Semi Dense bituminous concrete with higher ₹ 5,839.10 Rupees Five Thousand M.T. ₹

capacity batch type hot mix plant using crushed aggregates of specified grading, Eight Hundred

premixed with bituminous ( VG - 40 ) binder @ 5.0 percent of mix and ThirtyNine Paise Ten

filler,transporting the hot mix to work site, laying with a hydrostatic paver finisher Only

with sensor control to the required grade, level and alignment, rolling with smooth

wheeled, vibratory and tandem rollers to achieve the desired compaction as per

MORT&H Specification for Grdation Complete.

9 27877.50 Providing and applying asphalt painting on B.T. Surface with mechanical spreayer ₹ 51.30 Rupees FiftyOne Paise SqM ₹

using bitumen VG -40 at the rate of 5.00 kg/10 Sqmt and rolling with smooth Thirty Only

wheeledand pneumetic roller and brushing etc. complete.

10 1920.00 Road marking with hot applied thermoplastic paints with reflectorising glass beads ₹ 367.72 Rupees Three Hundred SqM ₹

on bitumin surface providing and laying a hot applied thermoplastic compound 2.5 SixtySeven Paise

mm thick includingreflectorising glass beads @ 250gms per sqm area, thickness of SeventyTwo Only

2.5mm is excluding of surface applied glass beds as per IRC:35-2015. The finished

surface to be level, uniform and free from streaks and holes. zebra patta /bump

patta lane/center line/ edge line/cut patta. The white color marking should

provide liminance coefficinet on cemend road shalll be min 130 mcd/m2/lux and

Asphalt road shall be min 100 mcd/m2/lux during the service life during the day

time. The marking should meet the performance criteria for night time reflectivity,

wet reflectivity and skid resistance as mentioned in the section-15 of IRC 35-2015.

Warranty for the Retro reflectivity should be two years.

11 2800.00 Cat Eye / Road Stud / RPM: Supplying of Molded Twin Shanks Raised Pavement ₹ 326.23 Rupees Three Hundred Nos ₹

Markers made of polycarbonate and ABS moulded body and reflective panels with TwentySix Paise

micro prismatic lens capable of providing total internal reflection of the light TwentyThree Only

entering the lens face and shall support a load of 13635 kgs. tested in accordance

to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH

Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and

length shall not exceed 20 mm, 130 mm and 130 mm and with minimum reflective

area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree.

The strength of detachment of the integrated cylindrical shanks, (of diameter not

less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be

a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the

shanks to go inside, without nails and using epoxy resin based adhesive as per

manufacturers recommendation and The color of the marker should be as per the

IRC 35-2015 and as directed by Engineer-in-charge.

12 180.00 Solar Stud : ₹ 2,088.68 Rupees Two Thousand Nos ₹

Solar Stud: Supplying of Solar Raised Pavement Markers made of polycarbonate EightyEight Paise

molded body with circular shape, solar powered, LED self illumination in active SixtyEight Only

mode, 360 degree illumination and reflective panels with micro prismatic lens

capable of providing total internal reflection of the light entering the lens face in

passive mode. The marker shall support a load of 20000 kg tested in accordance to

ASTM D 4280. The marker should be resistant to dust and water ingress according

to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C.

Color of lighting could be provided in red or yellow (amber) as per requirement and

typical frequency of blinking is 1 Hz. There should be current losses of less than

micro-amperes at 2.4 V in sleep-charging mode to enhance the life of the marker

and a full charge should provide for a minimum autonomy of 50 hours. The height,

width and length of the marker shall not be less than 10 mm x 100 mm x 100 mm.

Also, the surface diameter of the marker shall not be less than 100 mm

respectively. The weight of the marker shall not exceed 0.5 Kilograms. Fixing will

be by drilling holes on the road for the shanks to go inside, without nails and using

epoxy resin based adhesive as per manufacturers recommendation and complete as

directed by the engineer

13 8.00 Direction (Junction) Sign :-Providing and fixing sign boards made out of 2mm ₹ 26,572.09 Rupees TwentySix Nos ₹

aluminium sheet / 4mm ACP (Aluminum composite Panel); size 244x122 cms. Thousand Five Hundred

rectangular as per design of IRC-67-2012. Pre treated with phospheting process & SeventyTwo Paise Nine

acid etching; coated with one coat of epoxy primer and two coats of best quality Only

epoxy paint ; reflectorised with High Intensity Prismatic Grade retro refiective

sheeting of Type-4 as per ASTM D- 4956 and latest M.O.S.T. Specifications; 4.0mtr

(2 Nos.) long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron angle of 50x50x5mm; painted

with bestquality epoxy coatings in black and white bends. The details of symbol for

each board shall be as per the instruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc. complete under the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective sheeting from original manufacturer &

a certified copy of 3 year outdoor exposure test report from third party test lab for

the product offered shall be submitted by contractor. (B) Class-C Type-11 Retro

Reflective sheeting

14 12.00 Cautionary Warning Sign :-Providing and fixing sign boards made out of 2mm ₹ 5,077.27 Rupees Five Thousand Nos ₹

aluminium sheet / 4mm ACP (Aluminum composite Panel); size 90 x 90 x 90 cms. SeventySeven Paise

equilateral triangle as per design of IRC-67-2012. Pre treated with phospheting TwentySeven Only

process & acid etching; coated with one coat of epoxy primer and two coats of

best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.

Specifications; 3.6mtr longstand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm;

painted with bestquality epoxy coatings in black and white bends. The details of

symbol foreach board shall be as per theinstruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc. complete under the supervision of engineer in

charge. A warranty for 10 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure test report from third

party test lab for the product offered shall be submitted by contractor. (A) Class-C

Type-11 Retro Reflective sheeting

15 16.00 Hazard Marker Sign :-Providing and fixing sign boards made out of 2.0 mm ₹ 3,666.30 Rupees Three Thousand Nos ₹

aluminium sheet / 4 mm ACP (Aluminum composite Panel); size 90x30 cms. Six Hundred SixtySix

rectangular as per design of IRC-67-2012. Pre treated with phospheting process & Paise Thirty Only

acid etching; coated with one coat of epoxy primer and two coats of best quality

epoxy paint ;reflectorised with Micro Prismatic Grade retro refiectivesheeting of

Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 1.8mtr long stand

post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. The details of symbol foreach board shall be as

per theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC

block of size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc.

complete under the supervision of engineer in charge. A warranty for 10 years for

the Retro reflective sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for the product offered

shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

16 12.00 Village Name Sign :-Providing and fixing sign boards made out of 2mm aluminium ₹ 6,313.51 Rupees Six Thousand Nos ₹

sheet / 4mm ACP (Aluminum composite Panel); size 90x60 cms. rectangular as per Three Hundred Thirteen

design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated Paise FiftyOne Only

with one coat of epoxy primer and two coats of best quality epoxy paint ;

reflectorised with Micro Prismatic Grade retro refiective sheeting of Type-11 as per

ASTM D-4956 and latest M.O.S.T. Specifications; 3.3mtr long stand post of 75 x 75 x

6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size

iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and

white bends. The details of symbol or inscription/letters / umerals for each board

shall be as per the instruction of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg. including excavation, curing

etc.complete under the supervision of engineer in charge. A warranty for 10 years

for the Retro eflective sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for the product offered

shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

17 12.00 Informatory Signs:- Providing and fixing Informatory Signs made out of 2mm ₹ 5,906.48 Rupees Five Thousand Nos ₹

aluminium sheet, size 80 x 60 cms rectangle, as per the design of IRC-67-2012. Pre Nine Hundred Six Paise

treated with phospheting process and acid etching coated with one coat of epoxy FourtyEight Only

primer and two coat of best quality epoxy paint, refloctrorized with retro

reflective sheeting as per the latest M.O.S.T. specification, 3.1 Mt. long stand post

and frame fabricated from suitable size iron angle of 35 x 35 x 3 mm, 75 x 75 x

mm as required painted with best quality epoxy coatings in black and white bends.

The details of symbol for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 cms for

each leg, including excavation curing etc. complete under the supervision of

Engineer-In-Charge (B) High Intensity grade.

18 16.00 Regulatory / Mandatory Sign :-Providing and fixing sign boards made out of 2mm ₹ 4,618.73 Rupees Four Thousand Nos ₹

aluminium sheet / 4mm ACP (Aluminum composite Panel); size 60 cms Dia Circle as Six Hundred Eighteen

per design of IRC-67-2012. Pre treated with phospheting process & acid etching; Paise SeventyThree Only

coated with one coat of epoxy primer and two coats of best quality epoxy paint

;reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type 11 as

per ASTM D- 4956 and latest M.O.S.T.Specifications; 3.6mtr long stand post of

75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted with best quality epoxy coatings

in black and white bends. The details of symbol foreach board shall be as per the

instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size

45 x 45 x 60 Cms. for each leg.including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product offered shall

be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

19 40.00 Chevron Sign:- Providing and fixing sign boards made out of 1.5mm aluminium ₹ 4,681.35 Rupees Four Thousand Nos ₹

sheet/3 mm ACP (Aluminium composite Panel); size 60 x50 cm as per design of IRC- Six Hundred EightyOne

67-2012. Pre treated with phospheting process & acid etching; coated with one Paise ThirtyFive Only

coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with

Micro Prismatic Grade retro refletivesheeting of Type-11 as per ASTM D-4956 and

latest M.O.S.T. Specifications; 3.3 mtr. long stand post of 75 x 75 x6mm / 65 NB

Circular MS Pipe as required and frame fabricated from suitable size iron angle of

50 x 50 x 5mm; painted with bestquality epoxy coatings in black and white bends.

the deails symbol or inscriptio/ numerals for each board shall be per the

instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blacof size

45 x 45 x 60 Cms. for each leg. Including excavation, curing etc. complete under

the supervision of engineer in charge. A warranty for 10 years for the Retro

reflective sheeing from originaa manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product offered shall be

submitted by contractor. (A) Class-C Type-11 Retro Reflective Sheeting

20 6.00 Providing and fixing ordinary kilometer stone of precast C.C. 1:2:4 including ₹ 1,293.39 Rupees One Thousand Nos ₹

necessary reinforcement as per I.R.C. type design in C.C. 1:4:8 including painting Two Hundred

and lettering etc. complete. NinetyThree Paise

21.1 100.00 RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store or at site ₹ 1,289.15 ThirtyNine

One Thousand Each ₹

of work precast RCC M.200 Frame & cover suitable to drainage M.H. and as per Two Hundred EightyNine

type design & Drawing including cost of reinforcement M.S. Angles or Flat, curing Paise Fifteen Only

mold work etc.Heavy Duty with Holes to Pass water in Frame suitable for 50cm

21.2 100.00 RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store or at site ₹ 1,348.95 Rupees One Thousand Each ₹

of work precast RCC M.200 Frame & cover suitable to drainage M.H. and as per Three Hundred

type design & Drawing including cost of reinforcement M.S. Angles or Flat, curing FourtyEight Paise

mold work etc.Heavy Duty with Holes to Pass water in Cover suitable for 50cm NinetyFive Only

opening of MH ( @ 15% L.C. )

22 150.00 Renovation of Manhole by Increasing the height at top including cost of excavation, ₹ 686.90 Rupees Six Hundred Nos ₹

refitting of Manhole Frame and Cover curing etc. complete including all carting and EightySix Paise Ninety

providing of materials which is required for the purpose. ( Except Manhole Frame Only

and Cover ) for All type manhole by providing RCC 1:2:4 Partition Walls with

Required Reinforcement 25 cm thick and circular oprning with 500 mm clear dia

and 0.40 mt average height. @ 15% L.C. Calculated

23 75.00 Constructing brick masonry chamber for underground C.I. Inspection chamber and ₹ 2,932.93 Rupees Two Thousand Each ₹

bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. Nine Hundred ThirtyTwo

cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of Paise NinetyThree Only

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm

deep for single pipe line.

24 192.00 Supply and Apply Rumbble Strips Road marking with hot applied thermoplastic ₹ 1,772.55 Rupees One Thousand Rmt ₹

paints with reflectorising glass beads on bitumin surface providing and laying a hot Seven Hundred

applied thermoplastic compound 8 mm thick including reflectorising glass beads @ SeventyTwo Paise

250gms per sqm area, thickness of 8mm is excluding of surface applied glass beds FiftyFive Only

as per IRC:35-2015. The finished surface to be level, uniform and free from streaks

25 3034.50 Earthwork for embankment including breaking clods, dressing with all lead and lift ₹ 395.11 Rupees Three Hundred CuM ₹

and including watering rolling and consolidation of subgrade in layers at O.M.C. to NinetyFive Paise Eleven

required dry density including filling the depression which occur during the process Only

using power roller 8T to 10T.(E) From Borrow area within 18.00KM. lead

SUB ESTIMATE - 2 : STROM WATER DRAIN

1 1552.50 Excavation for foundation upto 1.5 m depth including sorting out and stacking ₹ 117.08 Rupees One Hundred CuM ₹

of useful materials and disposing off the excavated stuff upto all lead.(A) Loose Seventeen Paise Eight

or soft soil Only

2 1035.00 Excavation for foundation upto 1.5 m depth including sorting out and stacking ₹ 129.81 Rupees One Hundred CuM ₹

of useful materials and disposing off the excavated stuff upto allr lead.(B) TwentyNine Paise

Dense or Hard soil EightyOne Only

3 2360.71 Filling available excavated earth (excluding rock) in trenches.plinth, sides of ₹ 130.39 Rupees One Hundred CuM ₹

foundations etc. in layers not exceeding 20 cm. in depth consolidating each Thirty Paise ThirtyNine

disposited layer by ramming and watering with all lead and lifts. Only

4 90.00 Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting Cement) in ₹ 4,141.15 Rupees Four Thousand Rmt ₹

standard lengths of following class and diameter suitable for either collar joints or One Hundred FourtyOne

rubber ring joints including all taxes, insurance, transportation,freight charges, Paise Fifteen Only

octroi, inspection charges, loading, unloading, conveyance to departmental stores,

stacking etc. (IS - 458/ 1989).complete. 110 x 63 mm 90 x 75 mm 90 x 63 mm.Note

: One collar should be supplied with each full length plain ended RCC pipe, cost

included in rates below. One rubber ring should be supplied with each full length

socketed pipe, cost included in rates below. 900mm Dia Class NP3 Test Pressure

5 90.00 Lowering, laying and jointing R. C. C. pipes in C. M. 1:1 1/2 of following diameters ₹ 391.00 Rupees Three Hundred Rmt ₹

in proper position, grade and alignment at all level as directed by Engineer-in- NinetyOne Only

including conveyance from stores to site of work, labour, giving hydraulic testing as

per ISI code. 900mm Dia Class NP3 Test Pressure 0.7 Kg/sq.cm. ( @ 15% L.C. )

6 600.00 Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting Cement) in ₹ 2,237.90 Rupees Two Thousand Rmt ₹

standard lengths of following class and diameter suitable for either collar joints or Two Hundred

rubber ring joints including all taxes, insurance, transportation,freight charges, ThirtySeven Paise Ninety

octroi, inspection charges, loading, unloading, conveyance to departmental stores, Only

stacking etc. (IS - 458/ 1989).complete. 110 x 63 mm 90 x 75 mm 90 x 63 mm.Note

: One collar should be supplied with each full length plain ended RCC pipe, cost

included in rates below. One rubber ring should be supplied with each full length

socketed pipe, cost included in rates below. 600mm Dia Class NP3 Test Pressure

7 600.00 Lowering, laying and jointing R. C. C. pipes in C. M. 1:1 1/2 of following diameters ₹ 262.20 Rupees Two Hundred Rmt ₹

in proper position, grade and alignment at all level as directed by Engineer-in- SixtyTwo Paise Twenty

including conveyance from stores to site of work, labour, giving hydraulic testing as

per ISI code. 600mm Dia Class NP3 Test Pressure 0.7 Kg/sq.cm. ( @ 15% L.C. )

8 55.00 Constructing Chamber of 1.85 mtr X 1.36 mtr X 1.65 mtr Deep with R.C.C. top slab ₹ 16,099.40 Rupees Sixteen CuM ₹

( 0.15 mtr thick ) in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate Thousand NinetyNine

20mm nominal size) foundation concrete ( 0.15 mtr thick ) 1:3:6 mix (1-Cement : 3- Paise Fourty Only

coarse sand : 6- stone aggregates 40 mm nominal size) Inside/Outside plastering

15mm thick with Cement Mortar 1:4 (1-Cement : 4-coarse sand) finished with a

floating coat of neat cement and finished smooth complete including curing and

festing (i) Inside size 1400mm x 900mm and 1.65M. deep

9.1 55.00 RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store or at site ₹ 1,289.15 Rupees One Thousand Each ₹

of work precast RCC M.200 Frame & cover suitable to drainage M.H. and as per Two Hundred EightyNine

type design & Drawing including cost of reinforcement M.S. Angles or Flat, curing Paise Fifteen Only

mold work etc.Heavy Duty with Holes to Pass water in Frame suitable for 50cm

opening of MH ( @ 15% L.C. )

9.2 55.00 RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store or at site ₹ 1,348.95 Rupees One Thousand Each ₹

of work precast RCC M.200 Frame & cover suitable to drainage M.H. and as per Three Hundred

type design & Drawing including cost of reinforcement M.S. Angles or Flat, curing FourtyEight Paise

mold work etc.Heavy Duty with Holes to Pass water in Cover suitable for 50cm NinetyFive Only

opening of MH ( @ 15% L.C. )

10 69.00 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand ₹ 3,005.76 Rupees Three Thousand CuM ₹

broken stone aggregates 40 mmnominal size) and curing complete excluding cost of Five Paise SeventySix

formwork in (A) Foundation and Plinth (upto 10 ton) Only

TOTAL Rs. (Round Off) ₹

Rupees Five Crore Fifteen Lakh FourtySeven Thousand Five Hundred SeventySeven Only

I/ We am /are willing to carry out the work at ………….....………% above/below percent

above /below percent ( should be written in figures and words) of the estimated rates mentioned above.

Amount of tender works out as under.

*Estimate amount *Estimate amount

Put to tender Rs. Put to tender Rs. …

Deduct : % below / % Above Rs Add / Deduct :..: ……………..% above Rs………

Net. Total Rs………………..

In Words Rs. In Words………………………………………………

*( Please strike out whichever is not applicable)

Note-1:- All works shall be carried out as per Public Works Department, Hand Book & other specifications of Division or as directed.

Note-2:- All the columns in Schedule should be filled in digitally & the total of the entries in the last column should be struck by the contractor under his digitally

Note-3:- Rates quoted include clearance of the site (Prior commencement of work & at its close) in all respects & hold good for work under all conditions, site.

Note-4 The payment shall be made after availability fund. The contractor has no any claim in this regard.

Note-5 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

Note-6 The labour cess will be deducted as per prevailing rules i.e.1% of the work done.

Note-7 GST and Income tax TDS will be deducted at a source while making payments of bills

Note-8 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.G.R.:PRC-10/2017 Cement Consumption/16/ C Date : 11/05/2017 as stated in S.O.R.

therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Note-9 The rates to be quoted by the contractor must be inclusive of all duties, taxes, and other levies Except GST payable by the contractor under the contract or for any other cause shall be

included in the rates, prices and total Bid Price submitted by the Bidder

Signature of Bidder. Vapi Municipal Corporation