Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.8 LAccepted-AOC PO BIRPARA DIST JALPAIGURI PIN 735204 WB | ALIPURDUAR | WEST BENGAL | 735204 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹43.6 L+₹77,748.21 (1.81%)Rejected-Finance NEAR KRIPAN TCP GATE PO BINNAGURI DIST JALPAIGURI PIN 735203 W B | JALPAIGURI | WEST BENGAL | 735203 | L2 | Rejected-Finance OTHER THEN LOWEST BIDDER | |
| 3 | L3₹44.2 L+₹1.3 L (3.06%)Rejected-Finance | L3 | Rejected-Finance OTHER THEN LOWEST BIDDER | |
| 4 | L4₹44.8 L+₹2.0 L (4.57%)Rejected-Finance | L4 | Rejected-Finance OTHER THEN LOWEST BIDDER | |
| 5 | L5₹45.3 L+₹2.4 L (5.72%)Rejected-Finance R N COLONY PO BIRPARA DIST ALIPURDUAR W B PIN 735204 | ALIPURDUAR | WEST BENGAL | 735204 | L5 | Rejected-Finance OTHER THEN LOWEST BIDDER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
9 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) BINNAGURI
GE (SOUTH) BINNAGURI, PO - BINNAGURI, DISTT - JALPAIGURI, PIN - 735232
SPL REPAIR TO BLDG NO P-2/3/13, P-2/3/8 AND P-2/3/23, PROVN OF 2XADDL BATHING POINT NEAR P-25 AND P-24 BLDG AND PROVN OF 01X INCINERATOR NEAR ADM BLOCK AT BINNAGURI MIL STATION UNDER GE (S) BINNAGURI
2022_MES_544965_1
8516/E8
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) BINNAGURI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (SOUTH) BINNAGURI
₹90,000
Yes
13 Oct 2022
12 Aug 2022
12 Sept 2022
12 Aug 2022
9 Sept 2022
26 Aug 2022
Amount
Schedule 'A'
Taking down cement plaster on Brick wall or stone wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and fair without using extra cement complete all as specified and as directed.
M&L for external rendering 15 mm thick in two layer, first layer shall be of 10 mm thick CM 1:6 and second layer of finishing coat shall be 5 mm thick in CM 1:4 mixed with WPC as per manufacturer instruction by weight of cement on brick work or concrete surfaces of wall and finished even and fair complete all as specified and directed. Note-WPC shall be measured and paid seperately.
M&L for rendering 5 mm thick on fair faces of brick work or concrete surfacesof ceiling in cement morter 1:3 finished even and smooth without using extra cement complete all as specified and as directed.
Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed.
M&L preparing newly plastered or unplastered surface of wall and applying two coats of Cement base paint over a coat of cement base primer complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and applying three coats of white wash complete all as specified and directed.
M&L preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing complete all as specified and directed.
M&L for preparation of old decorated surface of wall and applying two coats of white wash complete all as specified and directed.
M&L for preparation of old decorated surface of ceiling and applying two coats of white wash complete all as specified and directed.
M&L preparation of old decorated surface of wall and applying one coat of Cement base paint complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for 40 mm thick cement concrete type B1, 1:2:4 (20mm graded aggregate) as in flooring of floor etc and finished including making joints to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:2 by weight complete all as specified and as directed.
M&L for 100 mm thick cement concrete type C1 (1:3:6 ) Norminal mix as in subbase of floor etc and finished the complete all as specified and as directed.
M &L for Stone Hardcore of gauge n exc. 63 mm, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L for 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection and footpath finished even and smooth without using extra cement, including making joints to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:2 by weight complete all as specified and as directed.
Demolition of brick masonary work, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding precast concrete articles etc. complete all as specified and directed.
M&L for Fly ash brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for Fly ash Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in 1:4 complete all as specified and directed.
M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate ) as in surface channels and drains etc complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.
Add or deduct for each 25mm girth or part thereof over or under 30cm ---------------- Ditto -----------.
Taking down existing tarfelt including plaster of any type and course from roof surface including adjoining parapets and removing the materials to a distance exc 50 mtr but n.exc 100 mtr away and deposited where directed including roughening old concrete surface by tucking and rubbing with wire brushes and cleaning the surfaces with water to remove all loose dirts etc complete all as specified and directed.
M & L screed bed or bedding layer 15 mm thick screed bed or bedding layer in CM (1:4) mixed with WPC as per manufacturer instruction for laying of APP membrane complete all as specified and directed.
M&L for water proofing treatrment to Non accessible RCC roof slab, including parapet comprising with the following courses of treatment. (a) Applying a coat of bitumenous primer confirming to IS-3384 1965 @ 0.4 ltrs per Sqm over plastered surfaces of roof incl parapet surface and allow to dry. (b) Apply one coat of hot blown bitumen grade 85/25 as per IS -702-1988 @ 1.20 Kg/ Sq.M of Each coat applied over primer including cleaning of surfaces. (C) Supply and laying 3 mm thick polymeric water proofing membrane weight not less than 3.50 Kg/Sq.M with non woven polyester fabric weight not less than 160 gms per Sqm over area including overlapping 100 mm (Min) as per manufacturers instructions. (d) Applying evenly one coat of bituminous aluminium paint @ 150 Gms/Sq.M complete all as specifiedand as directed. Note :- (i) Laying APP bassed polymenic membrane shall be done torch on methed or as per manufacturer's instructions. (ii) A minimum over lap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer's instruction. (iii) The complete work shall be done under strict supervision of manufacturers technical representative as directed.
S&F factory made Z section steel window with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay. complete with glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed.
S&F factory made Z section steel window with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay. complete without glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed.
S&F factory made Z section steel ventilator with top hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay complete with glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed.
S&F of 4mm thick plain glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.
S&F of Figured glass, pin head type 4mm thick in squares n.exc 0.50 Sqm in each pane complete all as specified and as directed.
S & F in stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and directed
Demolition of RCC of any description and in any position not otherwise specifically provided for including cutting reinforced as required complete all as specified and directed.
M&L for providing RCC 1:2:4 type B-1( using 20mm graded stone aggregate) as in precast cover slab or similar work including formwork complete all as specified and directed. Note:- Reinforcements shall measured and paid separately
M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 with grey cement and pigment as approved laid over and including 25mm thick consolidated sand cushion and joints filled with sand including dismantal old paver block complete all as specified and directed.
M&L for Machine cut kota stone slab flooring mirror finished 18-20mm thick (each slab not less than 0.25 sqm) over cement screed base rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and 20 mm thick screed bed or bedding layer in CM 1:4 surface finished fair and even for laying floor finishes complete all as specified and directed.
M&L for Machine cut kota stone slab flooring mirror finished 18-20mm thick (each slab not less than 0.25 sqm) on vertical surface such as dado / skirting / risers to steps etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and 20 mm thick screed bed or bedding layer in CM 1:4 surface finished fair and even for laying floor finishes complete all as specified and directed.
Taking down of shutter exc 1 Sqm but n. exc 2 Sqm after necessary repairs refix at the same opening complete as specified and as directed.
S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. NOTE: The quoted unit rate under this item shall deemed to be include one shop coat of primer.
M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete as specified and as directed.
S&F of 1 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required covering to door shutters covering to door chowkats (frames), chullah hoods, water tanks, water troughs, ducts, urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. complete as specified and as directed.
Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
M&L for high tensile 550 MPA yield strength Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with total mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal complete all as specified and directed.
All as per item No- 44 here- in- above but Plain sheets as in ridges/ hips / valley/Eaves and Eaves board - ditto --
Dismantaling of old unserviceable steel or iron work of any description complete all as specified and as directed.
M&L for mild steel work in tubular trusses and tubular posts including special shaped washer duly welded, complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St 240 with one shop coat of Zinc Chrome primer paint including preparation of surface at contractor workshop before fabrication complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exc 1.50 and n.exc 4 Sqm each and removing from site complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in hold fast block including necessary form work etc complete all as specified and as directed.
S&F 35mm thick second class hard wood rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
M&L second class Hard wood 35mm thick factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of me-mbers of shutters as specified in SSR Part I, Section 8, complete all as specified and directed.
S & F Mild steel barrel tower bolts 200 mm long , stove enamelled black, with bright bolt and fixed complete all as specified and directed.
S&F Mild steel handles 150mm size cast type stove enameled black comlete all as specified and directed .
S & F Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate of 300mm long complete all as specied and directed.
S&F in repair Steel rolling shutters 1.25 mm thick lath, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specied and directed.
S&F in repair Collapsible steel gates, top hung consisting of channel pickets, pivotedflat bars, top and bottom runners, brasshandles etc., as specified, erected inposition and securing runners with holdfasts and brackets, complete all as specied and directed.
M&L for preparation of newly or previously untreated surfaces of new steel surfaces of any description, over 10cm width or girth and applying Two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
Surface excavation n exc 30cm deep and average 15cm deep and getting out in soft/ loose soil complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth and not exceeding 1.5 m depth in soft /loose soil etc complete all as specified and directed
M&L for PCC 1:4:8 Type D2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.
M&L for providing RCC (desigm mix) M-25 using 20mm graded stone aggregate as in Rafts, Footings,Foundation, plinth beams, Braces for columns etc complete all as specified and directed. (Note :- Reinforcements and formwork shall be measured and paid separately)
M&L for providing RCC (desigm mix) M-25 using 20mm graded stone aggregate as in Beams,Cantilevers,Lintels etc and the like complete all as specified and directed. (Note :- Reinforcements and formwork shall be measured and paid separately)
M&L for providing RCC 1:2:4 type B-1( using 20mm graded stone aggregate) slab supported on walls, beam and column in floor, roof, landing, balconies, canopies, deck slab aand in shelves and the like inclluding necessary formwork complete all as specified and directed.
M&L for providing RCC (desigm mix) M-25 using 20mm graded stone aggregate as in column, pillers, piers, post and struts etc complete all as specified and directed. (Note :- Reinforcements and formwork shall be measured and paid separately)
M&L for TMT bars 16 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L for TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Form work to sides of concrete foundation ,footings, bases of columns, raft and raft beams sides and soffits (if any )of foundation and plinth beams for flat rough finished concrete surface complete all as specified and directed.
Use and waste of form work to soffits of floor or roof beam , beam haunching, girders, bressummers, lintels, cantilevers, shelves, for flat rough finished surfaces complete all as specified and directed.
Form work to sides of column, pillers, piers, post and struts etc for flat rough finished concrete surface complete all as specified and directed.
Formwork to flat fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landings , shelf and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement morter 1:4 finished even and fair without using extra cement complete all as specified and as directed.
M&L for prepartion of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of cement based wall care putty all as specified and directed.
M&L for preparation of newly plastered or unplastered surface of wall and applying two coats of Cement base paint over a coat of cement base primer complete all as specified and directed.
M&L for sand filling under floors or in foundations in layers, thickness of each layer n. exc to 15cm, including watering and consolidation complete all as specified and directed.
M&L for 100mm thick plain cement concrete 1:4:8 type D2 (using 20mm graded stone aggregate) as in sub base of floor and including use and waste of form work and finishing the surface even and rough complete all as specified and as directed.
M&L for 25 mm cement concrete type B-1 1:2:4 (20 mm graded stone aggregate) as in floor finished complete all as specified and as directed .
M&L for 25mm thick Damp proof course to horizontal or vertical surfaces using cement concrete 1:2:4 B0 (20mm graded stone aggregate) including necessary formwork complete all as specified and as directed. Note:-The rates for cement concrete damp proof courses include for incorporating integral water proofing compound in the manner specified by the manufacturer and in the proportions indicated. The rates do not include for the supply of integral water proofing compound.
M&L mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F Vitreous China wash down water closet pan (pedestal pattern), white including PVC seat cover closed pattern with flat bottem and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint to socket or stoper etc., complete all as specified and directed.
S&F PVC low level syphonic action flushing cistern of 10 lit capacity including siphon, PVC float with ball valve, rubber cone and flush pipe,Brackets,32mm bore PVC connection pipe etc complete all as specified and directed.
S&F Vitreous china wash basin, white, flat back, size 550 x 400 mm, including pair of brackets and cutting and pinning in ends of brackets,32mm dia CP waste Coupling,32mm dia and 450 mm long Waste pipe, complete all as specified and directed.
S&F Pillar taps 15mm bore, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F 15 mm dia PVC connection 450 mm long, complete all as specified and as directed .
S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed.
S & F 15 mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and as directed.
S&F 15 mm bore Stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.
M&L for glazed ceramic coloured tiles 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed.
S&F joint free non skid Ceramic tiles, coloured, superior quality 7 to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement and proper bedding and jointing with existing pipe complete all as specified and as directed.
S&F of PVC (SWR) Gully trap any radius suitable for 125/110 mm bore PVC pipe jointed with solvent complete all as specified and directed.
S&F of PVC 110 mm bore (SWR) pipes single socket, in any length with rubber ring joint, laid in trenches or in floor complete all as specified and as directed.
S&F of PVC 110 mm bore (SWR) pipes single socket, in any length with rubber ring joint, fixed to wall using PVC Clamps complete all as specified and as directed.
S&F of PVC 75 mm bore (SWR) pipes single socket, in any length with rubber ring joint, laid in trenches or in floor complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) bends any radius with access door with rubber ring joints complete all as specified and directed
S&F rotational moulded,Three layer HDPE water storage tank of 1000 ltrs capacity (Cylindrical vertical with closed top) ISI (IS 12701-1996) marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded UPVC tank niple, 25 mm dia brass ball valve with epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) including fixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.
Returning filling in inluding spreeding, leveling, watering and well ramming in layers not exc 25 cm thick in soft /loose soil complete all as specified and directed.
Removing excavated material (Soil) not exceeding 50 M and depositing where directed at a level not exc 1.5 M above the starting point complete all as specified and directed.
S& F 15 mm bore steel water tubes, medium grade, galvanised with all fitings and fixed to wall, complete all as specified and directed.
S& F 20 mm bore steel water tubes, medium grade, galvanised with all fitings and fixed to wall, complete all as specified and directed.
M&L for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
M&L for CP toilet paper holder of any description complete all as specified and directed.
Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed incl fixing of hold fast as per specification and drawing complete all as specified and directed.
S& F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with Wood free EPS complete all as specified and directed.
S&F Stainless steel butt hinges medium weight 100mm long for PVC door complete all as specified and directed.
S&F Aluminium anodized barrel tower bolts, extruded section 200mm long complete all as specified and directed.
S&F Aluminium anodized handles, D type, 150mm long complete all as specified and directed.
M&L for 50 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) complete all as specified and as directed.
M&L for 75 mm Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) complete all as specified and as directed.
M&L for Flush pointing to brick walls in CM 1:4 complete all as specified and as directed.
M&L for Keyed pointing to brick walls in CM 1:4 complete all as specified and as directed.
M&L for, Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde-E- 250) quality- A complete all as specified and as directed.
M & L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete jointed with gray cement and pigments, side coping also including 25mm thick consolidated sand cushion ander paver blocks and joints filled with sand complete all as specified and as directed.
M&L for 100mm thick concrete bed to drain pipe (150mm bore) with PCC (1:3:6) type D2 using 40mm graded stone aggregate including packing under and haunching aginnst the sides of pipe after they are laid jointed and tested complete all as specified and as directed.
M&L for salt glazed stone ware drain pipe grade-A, conform to IS-651-1980, 150mm dia laid in trenches and jointed in cement mortar (1:1) complete all as specified and as directed.
INTERNAL ELECTRIFICATION Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.
M&L point wiring complete with FRLS PVC insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'heavy grade' PVC concealed conduits and fittings, including cutting chasing in brick wall n.exc 10cm width or girth(excluding ceiling surface), pressed steel concealed terminal switch boxes not less than 1.2mm thick of required size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including making good disturbed surfaces with CM(1:4) with treating the surfaces as per existing finishes complete all as specified and directed. (a) One light point controlled by one way switch 5/6 amps.
(b) One Socket out let 5/6 amps point on the same board.
(c) One socket out let 5/6 amps point on the independent board
(d) One ceiling/ Exhaut fan point controlled by one way switch 5/6 amps.
All as per item No 120 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed.
S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed.
S&F of socket outlet 2 in 1, 5 Pin, 5/15 amp, multipurpose 230 volt flash type complete all as specified and directed.
S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed.
S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed.
S&F switch socket combination 2 in 1, 3 pin, 5 and 15 amp flush type universal complete all as specified and directed.
S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.
S & F Wall mounted LED Tube light fitting 20W, with extruded aluminium housing, with integrated LED driver complete all as specified and directed .
S&F LED lamp 9/10 W, B22, retrofit type, 1000lm lumen with an efficiency of 100lm/w with inbuilt short circuit, thermal and overload protection complete all as specified and directed.
S&F for lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and directed.
S & F deluxe fan Electronic regulator AC 50 Hzs rotary step white/ivory finish complete all as specified and directed.
Taking down old MCB DB's with MCB's/Main switches/wooden board complete all as specified and directed.
S&F sheet metal enclosure for 8 way DB's, double door, single pole and neutral enclosure with a two pin and earth plug and socket complete with one SP MCB 20 amps, C series,10 KA, 240 volts complete all as specified & directed.
S&F MCB single pole & neutral 32 amp, 415 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
S&F MCB single pole, 6 to 32 amps rating, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type B0 using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete all as specified and directed.
S&F High Power LED street light fitting ,system wattage-35 Watt, Complies to IEC 60598 and IS 10322 with deep drawn aluminium Pressure die cast housing ,toughened glass cover with IP-66,CL-I protection,Integral electronic driver,Heat sink,Cast Aluminium pipe mounting attachment complete with LED lights and connecting the street light fitting using 2.5 Sqmm PVC insulated three core copper cable including taking down all as specified and directed.
S&F street light bracket, made out of GI pipe medium grade) 25mm bore, 1.2 m long bend to shape and fixing/grouting with wall using 2 Nos 25 x 5 mm size MS FI clamps with bolts, nuts & washers complete including drilling as necessary and two coats of Aluminium paint over a coat of Red oxide primer all as specified & directed.
S&F PVC Insulated screened XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqm 2 core providing lugs, straight through joints as required complete including jointing material as required and making connection of LT cables , including dismantling & taking out defective LT under ground PVC cable from trenches, cutting and removing defective parts complete all as specified and directed.:- Note:- Excavation & earthwork,sand cushoining,brick protection & GI pipe shall measured and paid separately,
M & L for sand cushioning with river Sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable punned to a thickness of 18 cm) complete all as specified and directed.
Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed.
M&L for GI tubing 40 mm bore ,medium grade with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete all as specified and directed.
M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized iron strip 25x4mm by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type B0 using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete all as specified and directed.
Dismantling of existing unsv loose/disturbed Aluminum strip/GI Strip/Termination rod of any sizes on roof/down conductor fixed on wooden guities /directly on roof including screws etc complete all as specified and directed.
Dismantling air termination single pointed aluminium rod 12mm dia and 300 mm dia complete all as specified and as directed.
Dismantling unserviciable/rusted inspection boxes/test points of any size/type complete all as specified and as directed.
Supply and fixing aluminium strip of size 25x3.15 mm for earth continuity conductor fixed on PCC block complete all as specified as directed complete all as specified and as directed.
Supply & fixing for 32 x 6 mm galvanised iron strip,earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or fixed to poles or roof with saddel and screw current complete all as specified and directed.
Supply and fixing air termination single pointed aluminium rod 12mm dia and 300 mm dia complete all as specified and as directed.
S&F test point terminal block made of gun metal or phosphorus bronze 75x75x25mm fixed and screwed incl 3 Nos 8mm dia. 50mm long hex head screw rectangular opening at top and bottom for entry of down strip fixing screw and boults for mounting on wall complete all as specified and as directed.
S&F suitable size heavy duty bridge/post porcelain/mini busbar insulator on wall/ roof with suitable size of PVC plugs, screw for fixing aluminium/GI strip incl making good the disturbed surfaces complete all as specified and as directed.
M&L for PCC in Foundation for filling of road, in plinth protection as in bed plates for fixing of aluminium strip etc. in PCC 1:3:6 type C-1 using 20mm graded stone aggregate complete all as specified and as directed.
S&F sub main wiring with two run single core FRLS PVC insulated unsheathed multistranded copper conductor conforming to IS 694 of size 4 sqmm nominal cross sectional area,1100 v grade and one run of 4 sqmm nominal cross sectional area FRLS PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25mm dia 'medium grade' PVC concealed conduits and fittings,complete including taking down of old sub main wiring all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.
R K AGARWAL
M/s. RAMPHAL GARG
M/S PAWAN ENTERPRISE
M/S NIKITA ENGINEERING CO
S.N. GHOSH AND CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .