Repairs and renovation works to Occupational Health Centre (OHC) Building (first and Second floor).

Apply two coats of Arcylic Interior plastic emulsion paint over a one coat of primer, reqired shade to wall surfaces from approved brands Asian paints (Royal shine), Berger (silky luxury) where ever specified by Engineer including necessary scaffolding etc., alm complete as directed by Engineer In Charge

Applying two coats of Putty of approved brands Birla / JK to internal wall surfaces including applying suitable primer on old wall surface after thorough scrapping and preparation. Putty shall be finished till a smooth and even surface is achieved.

Providing two(2) coats of synthetic enamel paint for doors and windows etc., (after removing the rust by using wire brush or sand paper if required) of approved brand (Asian / Berger / Nerolac) and manufacture of required colour to give an even shade on old work including applying putty and prime coat complete all as directed

Providing Two(2) coats of white washing with suryacem / Hitech gold to ceiling surfaces after through scrapping, sand papering and cleaning the surface to give even shade etc., complete all as directed.

Providing Two coats of Teak wood Polishing to Doors including scrapping the old polish and cleaning the same complete all as directed.

Chipping of existing damaged plastering and providing 12mm thick CM(1:5) plastering by adding of suitable fosroc chemical in CM mortar complete all as directed.

Cleaning of existing toilet glazed tiles & Sanitary Fittings using detergents/ Acid and tile cleaning agents etc., all complete including all consumables and labour as directed by Engineer Incharge

Supply and fix 150mm long Stainless steel Handles to doors including necessary screw fittings complete all as directed.

Supply and fix 300mm long Stainless steel Aldrop including necessary screw fittings etc., complete all as directed.

Supply and fix 150mm long Stainless steel tower bolt including necessary fittings etc., complete all as directed.

Supply and fix 32mm dia PVC waste pipe for Washbasin or Urinal basin etc., complete all as directed.

Supply and fix 15mm Chrome coated Pillar tap to Wash basin including necessary fittings etc., complete all as directed. (Make Parryware, Hindware or its equivalent)

Providing and fixing 6 mm thick frame less beveled edge mirror of superior glass of approved quality of saint gobin / modi gaurd complete using stain less steel studs including all accessories etc., complete

Supply and fix chrome coated Two way bib cock of make Parryware or its equivalent complete all as directed.

Supply and fix 100mm dia SS Grating complete all as directed.

Providing Chrome plated brass Health faucet including 1.5m flexible pipe of make ISI or its equivalent including all accessories etc., complete all as directed.

Supply, fit and fix white glazed earthenware European type water closest (EWC) of Parryware / Hindware make with 'P' or 'S' trap with or without vent hole, colour or black solid plastic seat cover with low level cistern of 10 litres capacity of same make as specified including all fittings shall be provided complete all as directed.

Providing and fixing white vitreous china flat back lipped front urinal basin of make Parryware or Hindware of 430x260x350 mm with G.I clamps, 32mm dia PVC waste pipe, 15mm dia PVC polythene connector including fittings and brackets, cutting and making good the walls and floors wherever required etc., complete

Supply and fix chrome coated 15mm Stop cock complete all as directed. (ISI make)

Supply and fix chrome coated Soap dish complete all as directed. (ISI make)

PVC conduit wiring with 3 runs of 2.5 sq.mm FRLSH PVC flexible copper cable for 8 Modular switch board

Supply, fix, test & commissioning of 8 modular type switch board with 03nos. 3pin 5A modular socket with 2nos. switches as directed by engineer in-charge.

Supply, fix, test & commissioning of 8W LED Tube light as directed by engineer-incharge.

Supply, fix, test & commissioning of 20W LED Tube light as directed by engineer-incharge.

Supply, fix, test & commissioning of 1phase, 240V, 400 mm sweep exhaust fan with louvers as directed by engineer in-charge.

Supply, fix, test & commissioning of 1phase, 240V, 1200mm sweep ceiling fan as directed by engineer in-charge.

Apply two coats of Arcylic Interior plastic emulsion paint over a one coat of primer, reqired shade to wall surfaces from approved brands Asian paints (Royal shine), Berger (silky luxury) where ever specified by Engineer including necessary scaffolding etc., alm complete as directed by Engineer In Charge

Applying two coats of Putty of approved brands Birla / JK to internal wall surfaces including applying suitable primer on old wall surface after thorough scrapping and preparation. Putty shall be finished till a smooth and even surface is achieved.

Providing two(2) coats of synthetic enamel paint for doors and windows etc., (after removing the rust by using wire brush or sand paper if required) of approved brand (Asian / Berger / Nerolac) and manufacture of required colour to give an even shade on old work including applying putty and prime coat complete all as directed

Providing Two(2) coats of white washing with suryacem / Hitech gold to ceiling surfaces after through scrapping, sand papering and cleaning the surface to give even shade etc., complete all as directed.

Providing and fixing anodized extruded aluminium windows & ventilators (single or double shutter), doors and partitions (single or double shutter) part pannelled and part glazed with pre-laminated flat pressed 12mm thick particle board (NOVAPAN, ECOBOARD etc) of approved colour & make. Aluminium sections shall be powder coated with approved colour including aluminium powder coated frame conforming to IS:1948, IS:1949 fabricated from extruded sections of INDAL / JINDAL or approved equivalent make having minimum 2mm wall thickness for windows & ventilators and 3mm wall thickness for doors & partitions as per IS:1285, IS:733 and electro color coating of 15 microns thickness. Glazing shall be clear float glass of 5.5mm thickness of approved make SaintGobin / Modifloat including sanp fit type beading, concealed screws, fixtures (like tower bolts, hold fast, handles both sides, door stoppers with rubber shoes, 'L'drops, stays, floor springs, hydralic door closers etc) lokcing arrangement for windows, Godrej make mortice lock with 3 no keys for each door, C.P.brass / staineless steel screws, providing and fixing hinges / pivots, and making provisions for fixing of fittings where ever required including cost of PVC / neoprene gasket fits all complete with necessary fillingup of gaps at the junctions, at top, bottom and sides etc., complete. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required.

Supply of 110 mm dia UPVC(SWR) rain water downtake pipes conforming to IS : 13592 Type A, jointing with seal ring conforming to IS : 5382, including fixing of clamps, bends, shoes (supreme/ prince make) and removing of old pipe line and handover to disposal section etc., complete

Removal of old damaged wooden/ Aluminium partitions, wooden wall pannels, door/window shutters with frame, all kind of false ceiling etc., handing over of serviceable materials to CE department and disposal of unserviceable materials outside HSL premises as directed by Engineer In charge

Providing plain cement concrete 1:2:4 nominal mix using 20 mm graded crushed granite aggregate including mixing, depositing in position, tampering, finishing, curing including all materials & labbour etc., complete all as directed.

Provide and lay water proofing treatment consisting of: (i) through cleaning of existing RCC roof slab (ii) Repairing of all surface cracks wider than 3mm with polymer modified mortar prepared with Sikatop 77 acrylic polymer. (ii) Providing and laying cement plaster in CM 1:6 (where ever required to cover the undulations of slab surface) duly admixed with Sika Plastocrete Super @ 0.2% by weight of cement, over a bond coat of Sika Latex Cement Slurry to make the surface smooth and even (iii) Application of priming coat of compatible bituminous primer Sika WP Shield Primer W @ 0.300 kg per sqm over the cleaned and prepared roof surface complete as per satisfaction of the Engineer-in-Charge. (iv) Providing and laying STP(Shalimar) or Sika Atactic Polypropylene Polymer (APP) modified five layer prefabricated waterproofing membrane with thermal fusible properties on both side and having minimum thickness of 3.0mm and unit weight not less than 4.0 kg/sqm reinforced with non woven spun bonded polyester reinforcement @ 160 gm / sqm, <-50C cold flexibility. The layer of the membrane shall be laid using butane torch and sealing all joints properly, leaving no bare edge or end of APP membrane and finishing the surface with trowel or otherwise to obtain a uniform surface. The minimum side lap and end lap shall be kept at 75mm and 100 mm respectively. The membrane shall be laid over a coat of bituminous primer @ 0.300 kg./ltr per sqm made by the same membrane manufacture after necessary surface preparatory works such as cleaning the surface thoroughly, shaping mouths of outlets including cutting grooves (50mm x 50mm) in parapet and inserting edge of membrane and mending good damages by sand cement mortar (1:4) and shall be finished in all respect as per direction of Engineer-in-Charge. (v) Applying two coats of aluminium painting .

PVC conduit wiring with 3 runs of 1.5 sq.mm FRLSH PVC flexible copper cable for 8 Modular switch cum sockets

PVC conduit wiring with 3 runs of 2.5 sq.mm FRLSH PVC flexible copper cable for 16A switch cum socket

Supply, fix, test & commissioning of 3 modular type switch board with 01no. 16A (3+2 pin) modular socket and switch.

Supply, fix, test & commissioning of 3 modular type switch board with 01no. 6A (3+2 pin) modular socket and switch.

Supply, fix, test & commissioning of 8 modular type switch board with 03nos. 3pin 5A modular socket with 2nos. switches as directed by engineer in-charge.

Supply, fix, test & commissioning of modular type switch board with 5A 3-pin modular socket & switches for lighting as directed by engineer in-charge.

Supply, fix, test & Commissioning of 20A DP MCB DB with Metal enclosure for AC units as directed by engineer in-charge.

Supply, fix, test & commissioning of 8W LED Tube light as directed by engineer-incharge.

Supply, fix, test & commissioning of 20W LED Tube light as directed by engineer-incharge.

Supply, fix, test & commissioning of 1phase, 240V, 1200mm sweep ceiling fan as directed by engineer in-charge.

Supply, fix, test & commissioning of 1phase, 240V, 400 mm sweep wall mounted fan as directed by engineer in-charge.

SATYADEV PAINTING COMPANY

maple tree projects