PETTY REPAIR / REPLACEMENT AND MAINT TO JOINERY PLUMBING AND MASONRY WORK TO THE BLDGS UNDER AGE B/R-I AT IMA DEHRADUN

Amount

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.50 Sqm and n exc 4.00 sqm each complete all as specified and directed

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed

S & F Mild steel work in framed work such as in doors or gates of angle or other section with gusset plates, rails, braces etc and similar work confirming to Fe 290 Gde-E-165

S& F Factory made extruded WPC (Wood Polymer Composite) single Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed .

S& F Factory made single extruded WPC (Wood Polymer Composite) solid flush door shutter both side laminated of 24mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately).

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame fixing in the frame at site complete all as specified and directed

S&F in repair Solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing in SSR complete all as specified and directed

S& F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately

M&L 35mm thick factory made solid WPC (Wood plastic composit) moulded gauged door shutter brown, minimum density of 600 kg/cum with wire mesh in any number of division with (Frame size bottom rail 200 to 250mm wide ,middele or lock rail rail 150mm to 250mm wide, Stiles, top and freeze rails 100 to 120 mm wide and glazing bar 75 mm wide, including stainless steel wire mesh shall be fixed with WPC bedding in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again of the shall be as per manufacture instruction complete all as specified and directed.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners complete as per dirn of Engr-in-Charge.

S& F 30mm thick 2nd class hardwood factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed

M&L for Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with ri-veted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed

S&F 30mm thick flush shutter solid core construciton with partical board core and plywood face panels commercial type on both sides complete all as specified and directed.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners complete as per dirn of Engr-in-Charge. (Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made).

M&L for Mild steel door shutter two leaves with frame of 1 mm thick MS steel (all around) and leaves of 1.00 mm thick MS steel all as per Godrej Pattern with three way locking arrangement with brass lock and C P handle with duplicate keys including two costs of spray painting over a coat of red oxide primer complete in existing cup boards fixed with necessary nut bolts including embedding in PCC 1;2;4 incl taking down existing chowkhats or frame with shutters complete all as specified and directed Note.- Area of opening shall be measured

M&L for MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed

S&F Stack clamps made out of 25mm X 5 mm flat iron and 16mm dia round iron stays, for fixing up to 110 mm bore pipe including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed

M&L for in repair for 18/19mm thick both side prelaminated colour WPC board minimum density of 600 kg/cum for kitchen cabinet shutter/drawer front, cup board shutter, frame & fixed at site including Auto closing hinges 35 mm of 0 crank (KH-001) openable at 110 degree/Continuous (piano) hinges stainless steel, bright finish or electro-galvanised width of flap 30 mm and stainless steel handles of 150 mm size complete all as specified and directed.

S&F Chromium plated stainless steel wire basket (storage, cup and saucer, Plate, cutlery, Bottle pull out, Grain Trolley) pull out type Grade 304 with necessary fixing clips including ball bearing runners 45 mm Tele-scopic (KTS-20) full extension load capacity of 50 kgs etc fixed in repair complete all as specified and directed. Make : Hettich, Hafele, Butterfly

M&L for fibre reinforced liquid applied Elastomeric waterproofing membrane PU-Acrylic Hybrid Polymer on door/window chajjas, Roof, wall etc by scrapping of damaged portion and preparing the surfaces by 15 mm thick rendering in CM 1:3 and finished even and smooth using extra cement over concrete surfaces and benching including weathering slightely rounded or chamfered angles and applying a coat of PU (01 ltr/sqm appyling area) over a coat of priming coat of the same component all as directed by Engr-in-charge (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding and shuttering). Make : Dr fixit, Sika, Fosroc, Berger

Taking down of existing sunken slab treatment including demolition of sub base concrete of any description form the sunken portion and cleaning the surfaces by washing down with water and rubbish off the premises and treated the sunken portion as per following specifications:- (a) Cleaning and filling crevices, cracks and undulations by applying cement sand mortar mixed with SBR latex polymers of make- Dr fixit Pidicrete URP or equivalent of Sika or STP Ltd as per recommendations of manufacturer and then brushing the entire floor and walls of sunken area with neat cement slurry @ 3.00 kg/ sqm and laying 30mm average thickness of plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) over sunken slab portion in required slope and finishing the top surfaces even and smooth using extra cement. (b) Provision and fixing of 50mm dia PVC pipe as spout, projection 150mm beyond outer face of the wall of sunken floor to drain out water. (c) Apply two coats of acrylic cementitious water proofing coating resin base 2K, manufactured by M/s Pidilite industries Ltd, STP Ltd, Sika or equivalent make as approved by GE as per manufacturer recommen-dations on floor and all around wall surfaces dulyv sanding with dry coarse clean sand in second wet coat of 2K to make rough surface to receive plastering all as directed. (d) Laying a protective coat of 15 mm thick rendering in cement mortar 1:3 mixed with liquid water proofing compound @ 200ml per 50 kg cement or as per manufacturers instruction, of approved make on all surfaces of sunken area including vertical wall upto 450mm height, after preparations as mentioned above. Method of application for acrylic cementitious water proofing coating shall be followed as per manufacturers instructions. Note :- PCC sub base for filling under floor over treated sunken floor sufaces upto required level shall be measured and paid seperately under respective item of BOQ.

M&L for PCC 1;5;10 type E 2, (using 40 mm graded stone agg) as in foundation, filling, mass concrete and filling under floor over treated sunken floor sufaces including demolition of existing old concrete complete all as specified and directed.

M&L for 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe, cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) complete all as directed.

M&L for 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe,cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) complete all as directed.

S&F Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' trap PVC , concrete bedding and making good existing floor fixed in repair complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern) white including seat cover of plastic, complete including CP jet with necessary PVC pipe fittings fixed in repair complete all as specified and directed.

S&F Vitreous china wash basin, white, flat back, size 550x400mm including bracket fixed in repair complete all as directed.

S&F PVC low level flushing cistern 10 Ltr capacity syphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed.

M&L for 75 mm dia PVC (SWR) pipes single socketed rating 6kg/cm2 in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as directed.

M&L for 110 mm dia PVC (SWR) pipes single socketed 6kg/cm2 in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as directed.

S&F PVC (SWR) bends in any radius 110mm bore ISI marked in repairs complete all as specified and directed

S&F PVC (SWR) bends in any radius 75mm bore ISI marked in repairs complete all as specifed and directed

S&F PVC (SWR) Tee in any radius 110mm bore ISI marked in repairs complete all as specified and directed.

S&F PVC (SWR) Tee in any radius 75mm bore ISI marked in repairs complete all as specifed and directed

S&F in repairs 15 mm dia ball valve PTMT, high pressure with polythene float and fly nut complete, screwed for iron pipe complete all as specified and directed.

S&F in repairs 20 mm dia ball valve PTMT, high pressure with polythene float and fly nut complete, screwed for iron pipe complete all as specified and directed.

S&F 15mm bore short body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed.

S & F 15mm dia CP pillar cock Super Delux with Aerator fixed in repair complete all as directed.

S & F in repair brass chrominium plated tubular towel rail 20mm dia ,D type, 60cm long between flanges of approved make complete all as specified and directed.

S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete of approved make all as specified and directed.

S&F in repair chromium plated brass shower roses with or without swivel joints, any shower Arm complete of approved make all as specified and directed by EIC.

Supply and fixed in repair CP grating 100 mm dia complete all as specified and directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F PVC (SWR) floor trap 100mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed.

S&F PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed.

S&F PVC branch pieces single ordinary or inverted or with parallel branches 110mm dia fitted with oval access doors fixed in repair complete all as specified and directed.

S&F PVC branch pieces single ordinary or inverted or with parallel branches 75 mm dia fitted with oval access doors fixed in repair complete all as specified and directed.

S & F Stop valves, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and directed.

S & F in repair brass chrominium plated tubular towel ring complete all as specified and directed.

S&F cornner glass shelf of size 300mm x 300mm shelf and front,circle in design fixed over chromium plated brackets of heavy duty with frond linings with glass fixed in wall with necessary screws

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick premium quality (first class) (Square or rectangular) area of each tile exceeding 0.6 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in tile grout to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

M&L for Glazed ceramic coloured tiles of size 450 mm x 350 mm x 6 to 7mm thick premium quality (first class) , as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in tile grout to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

S&F Udaipur green marble work 18 to 20 mm thick (table rubbed and polished) as in flooring, steps, jambs, pillars, window-cills, cooking platform and like with and including 20 mm thick cement screed bed in CM 1:4 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of slab including rounding of edges of udaipur green stone and demolition of existing stone slab or tiles with screed bed of any description and in any position complete all as specified and directed.

Demolition carefully old RCC Chimny inside portion over cooking plateform in any position, carefully removing demolished material, making good existing wall surface including plastering and removal of debris out side MD land complete all as specified and directed.

Demolition of old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 12mm thick plaster on other then fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed.

M&L for rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed. Note- WPC will be measured paid as supply only under respective items separetely.

Supply only liquid water proofing compound ISI marked complete all as specified & directed.

M&L for rendering 06mm thick plaster in CM (1:3) on concrete surface of ceiling finished even & smooth without using extra cement complete all as specifiied and directed.

M&L for 75 mm thick PCC 1;3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc and including demolition of existing old cement concrete, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2, (using 40 mm graded crushed stone aggregate) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed

M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping, benching, holdfast etc including weathering sliglitely rounded or chamfered including necessary use and waste of form work including demolition of existing old cement concrete (unreinforced) of any description and in any position for complete all as specified and directed.

S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed.

M&L for 300x300x25mm heavy duty Chequered cement concrete tile of any pattern as in floors/pavings laid over 20 mm thick screed bed 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed.

M&L for Preparation of old plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper complete all as specified and directed.

Complete removing of existing treatment from wall / ceilling by using machinary complete all as specified and directed. (work to be carried upto a height of 7.50m high.

M&L for Prepration of scrapped / new surface of wall / ceilling and applying 1 to ½ mm thick Asian acrylic damp proof wall care putty in two coats as per manufacturer's instruction complete all as specified and directed.

M&L for applying two coats of weather proof exterior emulsion paint (Apex of Asian, weather coat of Berger) of any tint over a priming coat on wall, chajjas, facia etc with mechanical spray mechine complete all as directed. Note : The work will be carried out upto double storey building.The rate of scaffolding

M&L for Prepration of scrapped / new surface of wall / ceiling and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M&L for Preparation of old plastered/ unplastered surfaces of wall and applying one coat of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger) on walls complete all as directed.

M&L for Preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

M&L for Preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

M&L for PVC coated MS curtain rods 20-25mm dia with brackets, finIALS golden colour fancy type all as directed and approved fixed in repair complete all as directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in bed blocks etc for embedding hold fasts or filling of pressed steel door frame etc complete all as specified and directed

S&F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per relevant IS and as directed by Engineer in Charge complete all as specified and directed

S&F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with out glazing bars dovetailed or welded complete all as specified and directed as per relevant IS and as directed by Engineer in Charge

S&F Steel ventilator factory made with centre hung shutter including hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per relevant IS and as directed by Engineer in Charge

S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, and similar work complete all as specified and directed

S&F 100 mm size stainless (SS-304) steel butt hinges medium weight complete all as specified and directed .

S&F Butt hinges, 100mm long, medium weight, cold rolled, mild steel complete all as specified and directed.

S&F 250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as directed.

S&F 150mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed.

S&F 100mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed.

S&F 100mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed

S&F 150mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed

S&F 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat complete all as specified and directed.

Taking down steel window shutter n.exc 1sqm and refixing in the same opening after replacement of broken hinges & wire mesh including welding,reveting , grinding, painting etc each complete all as specified and directed Note: -(Wire mesh shall be measured and paid separately under respective items of this BOQ).

M&L for Preparing surfaces holding the members in true position and welding in reparis n. exc 2.5 cm in length, thickness of metal to be welded exc 9 mm and nexc 20 mm complete all as specified and directed

S&F for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed

Hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc complete all as directed.

S&F for 3mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pan, complete all as directed.

M&L for Preparation of new wooden surface of any description over 10 cm width and girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L for Vitrified ceramic tiles light shade 7 to 8 mm thick (Premium quality) (First quality) (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in tile grout to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in CM 1:4 complete and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

M&L for Vitrified ceramic tiles light shade 7 to 8 mm thick (Premium quality) (First quality) (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm,as in vertical surface such as skirting dado and riser to step floor etc set and jointed in tile grout to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Premium quality) (First quality) (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

S&F Non skid ceramic coloured tiles 7 to 8mm thick (Premium quality) (First quality) (Square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in vertical surface such as skirting dado and riser to step floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

S & F Chromium plated Stainless steel (SS-304) wire plate rack of size 30 inch X 30 inch X 10 inch fixed in repair complete all as directed.

S&F Brass spindle for existing bib cock, wall mixture , WHB mixture fixed in repair complete all as specified and directed

S&F GI Socket 15mm ISI mark fixed in repair complete all as specified and directed

S&F GI Elbow 15mm ISI mark fixed in repair complete all as specified and directed

M&L for RCC (1:1.5:3) type A-1 (using 20mm graded crushed stone aggregate) as in slab supported on walls beams and columns in floor, roof, landing and in shelves and the like including demolition of existing R.C.C complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use and waste of form work to edges of concrete flat slab and shelves, not exceeding 20cm Thick for fair finish surface complete all as specified and directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick for fair finish surface complete all as specified and directed

S & F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

S & F 1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

M& L 2nd class hardwood Plain fillets. square, rectangular or triangular in section not exc 3 Sq cm clean sawn, secured with nails or brads bull nosed, splayed,chamfered or rounded on one edge or face complete all as specified and directed.

S&F in repair 100mm long mild steel pressed handles for projection type steel window stove enamelled black complete all as specified and directed.

S&F in repair 4 lever mild steel lock with handle & plate suitable for existing steel cup board complete all as specified & directed.

M&L for removing/cleaning of debris of any type from IMA premises to outside of Defence land by using tractor trolley and each trip shall clean minimum 3 cum of material complete all as specified and directed.

S & F pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

S & F pre- painted colour galvalume aluminium Zinc coating GI based pre profiled (matching with roof sheet) plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

S&F Rubberised precast coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed.

Sanjay Enterprises (BID ID -3467863)

RAMSONS DEVELOPERS (BID ID -3461241)

M/S PUNDIR BUILDERS (BID ID -3467426)

M/s RK ENTERPRISES (BID ID -3467940)

Meher enterprises (BID ID -3462652)