SPECIAL REPAIR TO BLDG NO P-372 (OFFRS MARRIED ACCOMMODATION) AT INF LINES JAMNAGAR

Amount

Dismantling of stone tiles/slabs of any description or thickness laid bedded and pointed in any mortar .

M&L for Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

Moulding to granite (single or double) slab including rounding off edges for 18 to 20 mm thick slabs including grinding and polishing

M&L for Coloured Vitrified tiles 10 mm thick (square/rectangular) polished area of each tiles n exc 0.36 sqm in floors/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match in light shade including 15 mm thick screed bed in CM 1:6

M&L for Joint Free Non Skid ceramic colured tiles 7 to 8mm thick(square/rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6

M&L for Joint Free Glazed ceramic coloured tiles 300x450x7mm thick, in vertical sunface set & jointed in neat cement slurry & pointed in white or coloured cement to match including 10 mm thick screed bed in CM 1:4

Taking down shutters of any description exc 1.00 sqm and not exc 2.00 Sqm each.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames.)not excceding 1.5 Sqm each.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames.) excceding 1.50 Sqm but not exceeding 4.00 sqm each.

S&F Anodised Aluminium powder coated of any colour deco grill of 6 mm dia (powder coating not less than 50 micron) all as specified and directed.

S&F Aluminium anodised powder coated (powder coating not less than 50 micron) frame for doors, window & ventilators with shutter ,side hung type without sash bars, including frames necessary joining cleats, glazing clips, anodised aluminium snap beading, screws, bronze anodised alumuminium fittigs such as stays, hinges type B-21 100 mm long suitable handle and locking system etc. glazing cleats, neoprene rubber beading fixed in frames (Neoprene rubber beading/Glazing will be measured and paid separately) complete all as directed by Engr in charge.

S&F Neoprene rubber beading/packing complte all as directed by Engineer in Charge.

S&F Sheet glass, ordinary quality in square exc 0.50 Sqm each pane, 5.5mm thick fixed to Alumn section.complete as directed by Engineer-in-Charge.

Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers

S & F Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in 2nd class hardwood complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed.

S&F 30 mm thick 2nd class hardwood factory made glazed & skeleton door shutter open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) with wood free EPS , with 2,4 or 6 raised panel design with 2 mm thick PVC sheet on the front face and 2 mm plain colour PVC sheet on back face supplaying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Door Frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced with M.S. Square tube wood colour PVC sheet & edges will be painted to match with printed sheet , suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples (SS grade 304 ) complete all as specifiedand directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed 150mm long all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250 mm long complete all as specified and directed.

S&F Aluminium handles, cast type, anodised 150mm long.

S&F Stainless steel butt hinges 100 mm long all as specified and directed.

S&F Floor door stopper of stainless steel and tongue, 140 mm with hard drawn steel spring, fixed in floor

M&L Mild steel small articles such as clamps, hold fast etc conforming to Fe-410-0 or Fe-310-0.

Taking down cement plaster on brick/stone or concrete surfaces including racking out joints, hacking for key,scrubbing down with water to receive plaster, including removal rubbish outside MOD land etc complete all as specified and directed .

M&L for rendering 15 mm thick in two layes, 5mm in CM 1:4 over 10 mm in CM 1:6 on the external surfaces of brick work/Strone or concrete surface finishing fair and even without using extra cement.

M&L for rendering 10 mm thick in CM 1:6 on fair face of brick work/Stone or concrete surface to be finished even and smooth without using extra cement.

M&L for rendering 5 mm thick in CM 1:3 on ceiling to be finished even and smooth without using extra cement.

M & L for preparing New plastered surface and appling two coats of Exterier plastic emulsion paint over one coat of primer on wall all as directed.

M & L for preparation of new plastered surface of wall and applaying two coats of oil bond distemper and one coat of primer over 3 mm birla white putty all as specified and directed

Complete removing existing wall surface washing and scrubbing down and applaying two coats of exterior emulsion over one coat of primer

Complete removing existing wall surface washing and scrubbing down and applaying two coats of OBD over one coat of primer

Complete removing existing ceiling surface washing and scrubbing down and applaying two coats of OBD over one coat of primer

M & L for preparation of new plastered surface of ceiling and applying two coat of OBD over one coats primer.

M&L preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coats of pink primer.

M&L Preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint.

S&F in Repairs Rod Stainless steel 20/25mm dia as approved by Engr in Charge

S&F in repairs stainless steel curtain rod bracket, set of two decorative type all as specified and directed

S&F Decorative type cabinet Mirror of size 450x600 mm all as directed by Engineer-In-Chagre.

S & F in repairs vitreous china wash down water closet, Pedestal pan and trap (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe etc including making good to floor complete all as directed by Engineer-In-Charge.

S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and directed.

S&F in repairs PVC valveless syphonic action type , flushing cistern Low level white, with inlet ball valve ,float and handle 10 Ltr capacity including brackets.

S&F in repairs Flush pipe of Polyethylene of low or high density or PVC 32 mm dia. for low level cistern

S&F in repairs counter top Vitreous china wash basin, white , excluding taps, waste, chain and plug and porcelain stopper but including mounting on granite slab 20 mm thick and fixed with brackets and bottom space make PVC cabinet with handle complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450mm

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm all as specified and directed by Engr in charge

S&F Waste fittings,32mm brass , chromium plated for glazed ware sinks , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed

Taking up or down steel tubing and connections 20mm dia including cleaning for refixing or removal to store.

S&F 20 mm dia Steel water tubes, 'medium grade' , galvanised , with all fittings and concealed complete to walls and ceilings or laid in floors including cutting grooves & making good, filled with cement mortar 1:4.

S & F in repair 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe.

S&F Angular CP Stop valves,20 mm dia cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions.

S&F in repairs Brass CP three way wall Mixer for mixing hot & Cold water screwed down for iron pipe. (Make : Cat No:8575 of Prayag or equivalent in Jaquar /Cera)

S&F in repairs Brass CP Central hole Basin Mixer without Pop-up, fixed to iron pipe (Make: CAT No 8550 of Prayag or equivalent in Cera / Jaquar) specified and directed by Eng-in-charge..

S & F in repairs brass chromium plated over head shower with arm 255 mm with flange size fency type with or without swival joints any size including fixing to steel pipe 15mm bore unions. (Make: CAT No BS 73 Prayag or equivalent in Jaquar / Cera all as specified and directed by Eng-in-charge.

S&F in Repairs Health Faucet with 1.20mtr tube & Hook any description including flexible attachment (Make Cat No : BEA-41 of Prayag or equivalent in Jawquar / Cera)

S&F in repairs CP Bib taps, cast copper alloy with crutch or fancy type, screwed down, screwed for iron pipe or for brass ferrule.

S&F in Repairs Soap dish, any type, fixed to plugs with chromium plated brass screws

S&F in repairs glass shelf 300mm x 300mm x 5mm thick . Cat No BEA -43 of Prayag or equivalent in Jaquar /Cera all as specified and directed by Eng-in-charge.

S&F in repairsToilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws (Make: Prayag/Cera/ Jaquar).

Dismantling water tanks and removing to store capacity exc 500 litrs not exc 1000 litrs

S&F Rotational moulded polyethylene water storage tanks Cap 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

S&F 25 mm bore Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brassferrule.

S&F in repairs 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent.

S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors.

S&F in repairs PVC(SWR) bend any radius, 110 mm dia.

S&F in repairs PVC (SWR) junction single, (Single T) equal with access door 110mm dia etc complete all as specified and directed by Engr-in-Charge

S&F in repairs PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors.

S&F in repairs PVC(SWR) bend any radius, 75 mm dia.

Demolition of concrete of any description & in any position not otherwise specifically provided and removing debris outside MD Land.

M&L Average 50 mm thk Cement concrete type C2 , 1:3:6 (40 mm graded aggregate) as in levelling course/padding with slope 1:40 all as directed

M&L for Rendering 10 mm thick in CM (1:3) on padding course, with WPC @ 3% by wt of cement all as directed.

M & L for water proofing treatment to non-accessible roof slabs by applying one coat of bituminous conforming to IS-3384 @ 0.30 litre/sqm and laying Actitic Polypropylene (APP) modified membrance , reinforced with non woven ployester, of 3.50 Kg/sqm (minimum, 3mm thick (minimum) , with minimum 75 mm side overlaps and 100mm end overlaps and applying one coat of bituminous aluminium paint over APP membrane all as specified and directed by Engineer-in-Charge.

Dismantling of wrought iron or mild steel work of any description

M&L Rolled sections, structural steel/Angle/M S Pipe/Hollow Section as in main and cross beams, hips and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates

M&L for preparation of new steel surfaces exc 10 cm in width or girth and applying 2 coats synthetic enamel paint over a coat of pink primer.

Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m depth for foundations, sewage lines etc and n.exc 10 Sqm on plan for manholes and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including, spreading, leveling, watering and well ramming in layers not exc. 25 cm depth as in any type of soil complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m from starting point.

Demolition and breaking up any sewage drain pipe not exceeding 150 mm bore dia set in cement mortar including haunching as directed by Engr-in-Charge. NOTE: Existing bed of old pipe shall not be demolished.

M&L for cement concrete hunching against the sides of pipes after they are laid to 150 mm bore SGSW drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) laid to falls including packing under, and tested, complete all as specified and directed. (Note :- SGSW pipe shall be measured and paid separately).

Demolition of brick work/stone masonry built in cement mortar of any description

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 (for manhole) all as specified and directed.

Dismantling Glass fibre sheet/asbestos cement ( corrugated, semicorrugated ,etc.) sheets in roof coverings including ridges/gutters etc

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridge etc, fixed with self tapping screws as specified

Taking down carefully aluminum /copper point wiring (light, fan, switch & power) complete including fittings such as switches, ceiling rose, pendent, by unscrewing from board ,outlet box, fitting and fixture such as bulk head fitting, sketch fittings and making dood the disturbed srurfaces of walls floors etc all as directed.

M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross sectional area, single core, pvc insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No in and including medium grade, PVC Concealed conduit of dia not less than 20mm and conduit accessories concealed in wall(Brick/stone masonary), ISI marked with valid CML No (IS-9537-1983 for conduits and IS: 3419:1976 for conduit accessories), with modular metal flush boxes & cover plate with frame of white colour of suitable size as required at site; including PVC insulated multi stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dully complete all as specified and directed at site for the following :

(a) One light/ Fan point controlled by one way switch.

(b) One Bell point controlled by one switch bell push

(c) One 5 Amps socket on same board with other switches.

(d) One 5 Amps socket on independent board.

All as per item No-2 here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed.

S&F modular switch piano flush type single pole one way 6/10 Amps,1 module

S&F moduler socket 6/10 Amps -2/3 pin combined 2 module,

S&F modular switch piano flush type single pole one way 16/20 Amps,1 module

S&F Modular socket 6/16 Amps 2/3 Pin combined 2 module

S & F Modular switch Bell Push 6/10 Amps single pole one way.

S&F Bell Ding Dong AC 230 volts type single pole as directed,

S&F modular fan regulator Step type 120W 2module ISI marked complete all as specified and directed.

S&F ceiling rose surface backelet ISI marked 2 to 3 terminal all as specified.

S&F lamp holder insulated body with back plate for battern fittings.

Supply& Fixing LED batten fittings 4ft 20 Watt (Min 1900 lumens) with clamps incl PVC gutties and flexible wire and connecting to ceiling rose complete .

Supply& Fixing LED Batten fittings 2ft 10 Watt (min 800lumens) with clamps incl PVC gutties and flexible wire and connecting to ceiling rose complete .

Supply& Fixing LED Batten fittings 1ft 5 Watt (min 380 lumens) with clamps incl PVC gutties and flexible wire and connecting to ceiling rose complete .

Supply& Fixing LED Retrofit lamp 9 Watt white 6500K cool day light Minimum lumens 900 in angle holder complete.

LED light fitting, 1x12 Watt bulk head luminaries, complete with all accessories and including connection up with twin core twisted flexible copper conductor cable with suitable size of 230v, 50 HZ complete all as specified and directed.

S&F DB sheet metal enclosure 12 way SPN with 200Amp rated bus bar for mounting MCB double door.

S&F MCB SPN 40 Amps 240V all as specified and rupturing capacity 10 KA

S&F MCB single pole 5 to 32 Amps B series all as specified and rupturing capacity 10 KA

M&L for sub main wiring with two runs of 4.00 Sqmm single core FRLS PVC unsheathed and insulated 1100 Volt grade/Multi stranded copper conductor drawn through PVC conduit and accessories fixed an surface of walls, ceiling floors etc including one run of PVC insulated and unsheathed cable of copper conductor of 4.00 Sqmm single core as earth continuity wire all as specified and directed. Note :- Two runs of single core PVC insulated unshethed cables and one run of earth continuity conductor incl conduit will be messured and paid as one unit length only.

Taking down & Refixing Exhaust fan 225mm sweep AC, 240 volts,Metal body ,in same location after cleaning , greasing and painting with synthetic enamel paint by spreying including filling cavities with filler, one coat after cleaning all dusts etc and connecting up including provision of flexible wire from ceiling rose/connector to fan all as specified and directed by Engr in charge.

Taking down & Refixing Ceiling fan 1200mm sweep AC, 240 volts,Metal body ,after cleaning , greasing and painting with synthetic enamel paint by spreying including filling cavities with filler, one coat after cleaning all dusts etc and connecting up including provision of flexible wire from ceiling rose/connector to fan all as specified and directed by Engr in charge

Taking down & refixing of existing water heater geyser 25 Ltr capacity Geyser,vertical type with complete accessories in same location after completion of bldg repair.

Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in grond (earth pit not less than 2.25 mtrs below normal ground level) with the top edge of the plate not less than 1.5m below the normal ground level connected to GI wire 4.00mm dia protected by 15mm bore GI pipe (light grade) and watering pipe 20mm bore GI pipe(light grade) and PCC Pit (1:3:6) type C1 using 20mm graded stone aggregate with RCC cover including excavation and earth work and removal of surplus soil complete all as shown in electrical plate No-3 of SSR part-I and as specified including earth plate packed around with charcoal dust common salt complete including GI sheet funnel, wire mesh, earth lead wire 4mm dia and earth lead connected to earthing test point/ main board. The GI earth wire 8 SWG under the earth and on pole/db upto a height of 1.5m shall also be protected by 15mm dia GI pipe (light grade ) and the GI pipe to be fixed with poles/wall by means of 02 Nos. FI clamp 25x3mm with nuts bolts and washer etc. complete all as specified and directed by Engineer-in-Charge. Note :- GI earthing wire of same size upto 7.5m shall deemed to be included into quoted rate

Supply, fixing, testing and commissioning 30W LED security light fitting with system output of 3000 lumens & with dedicated street light optics, System efficacy of greater than 100lm/W luminarie should have pressure die cast aluminium LM6 housing. Luminaire should have dedicated street light optics for better uniformity & spacing. Luminarie should have air vents in housing for proper thermal management. Min IP preventation should be IP65.

S& F security light bracket made out of GI pipe 25mm light grade ISI marked 1.5 Mtr long bend to shape as required for LED fittings at site including M S Clamp 2 Nos made out of flat iron 50 X 5mm with necessary nuts Bolts and two coats of alluminium paint over a coat of red oxide primer all as directed.

S & F Sheet metal enclosures with socket plug top and single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20Amp MCB SP of 240 volts.

Supply & Laying cable of 16 Sqmm x 2 core, only in trenches / poles / walls XLPE insulated, armoured, Heavy duty electric power cable with aluminium conductor 1100 volts grade for following size with lugs including taking out old unserviceable cable complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5mtr wide & not exceeding 1.5 mtr in depth for laying LT cable, hard/loose soil complete all as directed.

Returning, filling in trenches with soil, including spreding, leveling, watering & well ramming, in layers not exceeding 25 cm each complete

Removing surplus excavated material (soil) to distance not exceeding 50 Mtr & depositing where directed at level not exceeding 1.5 mtr above the starting point.

M & L Sand filling in cable trenches for cable protection with clean dry sand unwashed including gently put in trench

Supplying and laying reinforced precast concrete cable cover, class LV, Type 1, flat, size 250 mm x 150mm x 40mm

SHAM AND CO

VINUBHAI P. CHANDRA