Providing, Supplying and Arranging Furniture At Collector Office Modasa Taluka : Modasa District : Arvalli

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

1 High back revolving & tilting executive chair 18.00 12625.00 Nos

Providing and supplying High back chair of HOF make Z407

model or equivalent for conference with M.S frame work.

Upholstered with Artificial leather/Leatherette and molded

PU foam, together with molded seat & back covers. The

back foam should be designed with contoured lumber

support for extra comfort. Caster of high durability

& hydraulic. The chair should have cylinder with 5 years

warranty. The size of chair 53cm x 79cm (Back side) and

51cm x 49cm (seat size). The PU foam should be molded

with density = 45 ± 2 kg/m3 with One-piece armrests.

The armrests are scratch and weather resistant. The

permanent contact mechanism is designed with 360°

revolving type, 12º seat tilt 19° back tilt, Front pivot for tilt

with feet resting on ground ensuring more comfort, Tilt

tension adjustment, 5 position locking with anti-shock

back mechanism, which should prevent the backrest

from impacting the user when the lock is released,

static seat depth adjustment = 0.5 cm 5 position locking.

Number of support members :

2 Providing, fixing and Arranging 2 store well MS tijori 24.00 10605.00 Nos

having Two Compartment Part with Two shutter with

Lock. This shall have an overall size of 900mm(W)x

507mm(D)x 1750 mm(H) It should have the shelf thickness

of 0.7 mm, Back thickness of 0.8mm, Door thickness of

0.8mm (high yield strength) and all other components shall

have a thickness of 0.9mm. These components shall be

made of CRCA ‘D’ grade high yield strength as per IS:513.

The Store well should have a Mazak handle and Three way

locking mechanism with Shooting Bolts. It should have a

height wise adjustable shelf mounting which shall have a

Uniformly Distributed Load Capacity of max 40 Kg. It should

also have a M10 Screw type Leveller with Hex plastic base.

The finishing shall include Epoxy powder coated to the

thickness of 50 microns (+/- 10). The quoting price should

be inclusive of all types of taxes & duties ,packing,

forwarding, loading, lnloading, installaion.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

3 Providing, fixing and Arranging 2 store well tijori having 7.00 8080.00 Nos

Two Compartment Part with Two shutter with Lock. This

shall have an overall size of 900mm(W)x 507mm(D)x

mm(H) It should have the shelf thickness of 0.7 mm, Back

thickness of 0.8mm, Door thickness of 0.8mm (high yield

strength) and all other components shall have a thickness of

0.9mm. These components shall be made of CRCA ‘D’

grade high yield strength as per IS:513. The Store well

should have a Mazak handle and Three way locking

mechanism with Shooting Bolts. It should have a height wise

adjustable shelf mounting which shall have a Uniformly

Distributed Load Capacity of max 40 Kg. It should also have

a M10 Screw type Leveller with Hex plastic base. The

finishing shall include Epoxy powder coated to the thickness

of 50 microns (+/- 10). The quoting price should be inclusive

of all types of taxes & duties ,packing, forwarding, loading,

lnloading, installaion.

4 Providing and Arranging three seater gang seater having 3.00 4848.00 Nos

seat and back made from CRCA capcular Tubular frame

welded with perforated Die moulded CRCA sheet. base

frame made from round Tubular welded with horizontal

beam Two side armrest welded with frame including

finishing metal parts with epoxy polyster powde coating of

50 micron thickness Including all materials and labour

etc.Complete as per drawing and instruction of engineer-in

charge 3 Seater S.S. Gang Seater :

5 Metal rack 8.00 1868.50 Nos

Providing and supplying metal rack made with slotted M.S

angle racks with adjustable made with high grade steel IS

5986 for Upright and IS 513D. All the components shall be

thoroughly pretreated in stage pre treatment process and all

the components shall be painted with epoxy powder coating

and film thickness of minimum 50 microns. Color: Grey color

for beam and base plate rest all components should be in

dark Grey color.

Size :- 152 cm x 45 cm x 182 cm. As per Instruction of EIC

& User Department

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

6 Table - Staff 1350 MM X 750 MM X 750 MM 7.00 8585.00 Nos

Providing and supplying Table made with 19mm Thk.

Plywood (M1) structure as per architect drawing finished

with 1.0 mm Thk. decorative laminate (M24) on outside

portion & 0.8 mm Thk. liner Laminate inside as specified &

approved by architect with fixed with necessary fixtures and

fastening (Hardware) (M14) as per architect drawing.

Provide Plastic Computer Desk Table Grommet Cable Wire

Outlet Hole Cover 60mm, Key-board trey, S.S. legs,

Drawers with telescopic roller channels (M15), Handle (M19)

and locking (M16) arrangements with all necessary fixtures

and fastening (M14). Provide Shutters as per drawing fixed

with handle (M19), hinges (M18), magnet (M14), complete

with bidding patties and all required hardware (M14).

Provide footrest as per drawing. All exposed edges shall be

covered with required Teak wood beading Patti (M4)

finished with approved melamine polishing (M29) work.

Complete as per architect's drawing and as per instruction

of architect & engineer in charge.

7 Table - Staff - 1800 MM X 750 MM X 750 MM 6.00 10605.00 Nos

Providing and supplying Table made with 19mm Thk.

Plywood (M1) structure as per architect drawing finished

with 1.0 mm Thk. decorative laminate (M24) on outside

portion & 0.8 mm Thk. liner Laminate inside as specified &

approved by architect with fixed with necessary fixtures and

fastening (Hardware) (M14) as per architect drawing.

Provide Plastic Computer Desk Table Grommet Cable Wire

Outlet Hole Cover 60mm, Key-board trey, S.S. legs,

Drawers with telescopic roller channels (M15), Handle (M19)

and locking (M16) arrangements with all necessary fixtures

and fastening (M14). Provide Shutters as per drawing fixed

with handle (M19), hinges (M18), magnet (M14), complete

with bidding patties and all required hardware (M14).

Provide footrest as per drawing. All exposed edges shall be

covered with required Teak wood beading Patti (M4)

finished with approved melamine polishing (M29) work.

Complete as per architect's drawing and as per instruction

of architect & engineer in charge.

8 Three seated sofa 1.00 23735.00 Nos

Providing and supplying sofa. (3 seated) made of Nilkamal

Elena Fabric (New Wenge) or equivalent with using wood

structure frame with SS legs required necessary support

fixed with necessary fixtures and fastening (Hardware)

(M14). It shall be covered with 32 Density PU foam

(M22) with required thickness as per design in seat &

back and handle portion this should be again covered with

14 mm thick PU foam (M22) with Madarpat cover on it &

upholstered fabric (M26) or leather of suggested & approved

by architect finished with seat, back & all visible side as per

architect drawing. Complete as per architect's drawing and

as per instruction of architect & engineer in charge.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

9 Two seated sofa 1.00 19695.00 Nos

Providing and supplying sofa. (2 seated) made of Nilkamal

Elena Fabric (New Wenge) or equivalent with using wood

structure frame with SS legs required necessary support

fixed with necessary fixtures and fastening (Hardware)

(M14). It shall be covered with 32 Density PU foam

(M22) with required thickness as per design in seat &

back and handle portion this should be again covered with

14 mm thick PU foam (M22) with Madarpat cover on it &

upholstered fabric (M26) or leather of suggested & approved

by architect finished with seat, back & all visible side as per

architect drawing. Complete as per architect's drawing and

as per instruction of architect & engineer in charge.

10 Providing and Arranging fix chair having structure of CRCA 19.00 4151.10 Nos

M.S.pipe 20mm dia and 16 guage with 50 micron powder

coated of approved seat and back 40 density PU foam

covered with fabric of approved shade and texture with ne

year replacement warranty. Wooden arm rest to be provided

as per approved design. Complete chair should be in

suitable shape including all materials and labours etc.

complete as per drawing and instruction of engineer-in

charge. Visitor Chair

Total Rs.

Rupees Eight Lakh Thirteen Thousand Eight Hundred FourtySeven and Paisa Ninety Only

I / We / am/are willing to carry out the work at ________________________________% above / below

percent (should be written in figure and words) of the estimated rates mentioned above. Amount of my/our

tender Works out as under.

Estimated Amount Estimated Amount

put to tender Rs. _________ put to tender Rs. _________

Deduct_______% below Add_______% above

Net Rs._________ Net Rs._________

in words ___________ in words ___________

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

R.& B. Sub Division R.& B. Division

Modasa Modasa