Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.2 Cr
EMD Value
₹2.2 L
Closing Date
23 Nov 2026, 6:00 pmDue today
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer, Surat Canal Division, Surat
Constructing Box type V.R.B in plac of Exiting VRB @CH. 115.79 RD & CH. 131.24 RD of KLBMC.
364298
NIT-06 of 2026-27
Open
Civil - All
Works
Surat
13 documents required · 11 mandatory · 2 optional
₹3,600
Executive Engineer, Surat Canal Division, Surat
₹2.2 L
8 Nov 2026
8 Nov 2026
8 Nov 2026
23 Nov 2026
8 Nov 2026
120 days
BILL OF QUANTITIES
BILL OF QUANTITIES
1. The bill of Quantities shall be read in conjunction with the Instructions to Bidder,
Conditions of Contract, Technical Specifications and Drawings.
2. The quantities given in the Bill of Quantities are estimated and provisional, and are given
to provide a common basis for bidding. The basis of payment will be the actual quantities
of work ordered and carried out, as measured by the Contractor and verified by the
Engineer and valued at the rates and prices tendered in the priced Bill of Quantities, where
applicable, and otherwise at such rates and prices as the Engineer may fix within the terms
of the Contract.
3. The rates and prices tendered in the priced Bill of Quantities shall, except in so far as it
is otherwise provided under the Contract, include all constructional plant, layout,
supervision, materials, erection, maintenance, insurance, profit, taxes and duties,
together with all general risks, liabilities and obligations set out or implied in the Contract.
4. The rates and prices shall be quoted entirely in Indian Currency.
5. A rate or prices shall be entered against each item in the Bill Quantities, whether quantities
are stated or not. The cost of Items against which Contractor has failed to enter a rate or
price shall be deemed to be covered by other rates and prices entered in the Bill of
Quantities (in case of Item rate contract).
6. The whole cost of complying with the provisions of the Contract shall be included in the
items provided in the priced Bill of Quantities, and where no Items are provided the cost
shall be deemed to be distributed among the rates and prices entered for the related items
7. General direction and descriptions of work and materials are not necessarily repeated
or summarized in the Bill of Quantities. References to the relevant sections of the contract
documentation shall be made before entering rates or prices against each item in the Bill
8. The method of completed work of payment shall be in accordance with the specification for
Road and Bridge works. For building works specifications for building are to be followed.
9. Errors will be corrected by the Employer for any arithmetic errors pursuant to
Clause 29 of the Instructions to Bidder.
10. Rock is defined as all materials which, in the opinion of the Engineer, required blasting,
or the use of metal wedges and sledgehammers, or the use of compressed air drilling
for its removal, and which cannot be extracted by ripping with a tractor of at least 150 kw
with a single rear mounted heavy duty ripper.
BILL OF QUANTITIES
Name of Work : Constructing Box type V.R.B in plac of Exiting VRB @CH. 115.79 RD & CH. 131.24 RD of
Percentage Rate Tender (Up to INR 50 Cr. )
Sr Description of Item (with brief Quantity Unit Rate in Amount
No specification and reference to book of Figures
specifications)
Dismentalling the existing brick masonry including
sorting out and stacking the useful materials and
removing the debries and making good the
damage etc. complete as directed. (b) In cement
Dismentalling the existing foundation concrete
including disposing the dismentalled stuff including
sorting out and stacking the useful materials and 228.00 CM 1310.80
removing the debries and making good the
damage etc. complete as directed.(c) R.C.C for
super structure.
Excavation for foundation in all sorts of soil
including yellow, sandy, gravelly soil, soft & hard
murrum, etc. dry condition including depositing the 2552.00 CM 81.50
excavated stuff in uniform layers in banks or as
directed etc. complete for lead uo to 1.0 Km and all
lifts. (By machinery) (a) Above water table.
Providing and laying plain/ reinforced Design Mix
cement concrete of various grade with cement,
sand and coarse aggregates including centering,
shuttering, batching, mixing, transporting, placing,
vibrating, smooth finishing, curing etc. complete for
all lead and lift.(Batching Plant Based, Including
(A) Foundation (i) M-10 grade 140.00 CM 3836.00
(B) Piers, abutment, wing walls, headwall, return
wall etc (ii) M-15 grade
(C) Raft, Bottom slab of barel, footing of columns,
piers, abutment and bottom slab of sump etc. (iii) CM 4796.10
Concrete grade M-20 and MSA-20 mm
(D) Raft, Bottom slab of barel, footing of columns,
piers, abutment and bottom slab of sump etc. CM 4844.70
(iv)Concrete grade M-25 and MSA-20 mm
E) Roadway slab, approach slab, chute floor slab,
kerb, pier cap, abutment cap, hoisting platform, top CM 5206.30
slab of barrel etc.
(F)For Road way slab, Approch Slab, Chute floor
slab,kerb, piercap, Abutment cap, Hoisting CM 5206.30
platform, top slab of barrel Etc.
Providing and placing in position reinforcement
bars including cutting, bending welding, joints
where necessary, hooking etc. complete as per
drawing for all lead and lifts. (A) TMT.
Providing and fixing in position PVC heavy duty
water stops in barrels, trough, and wing wall with
25 mm wide expension joint as shown in drawing
including filling the joints with asphalt pad or
bitumins or cork board of approved quality. (A)
225mm wide PVC water stop.
Providing and filling the polysulphide joint selent of
the approved make in the expansion and RM 533.00
contraction joints in the c.c. lining including clearing
the joints with air water jet.
Providing and fixing in position pre moulded
8 asphalt or bitumen cork board of approved quality SM 1007.40
and specification as per design and drawing as
directed. (D) 12mm thickness
Back fiing the foundation trenches around the
structures etc. with selected excavated stuff CM 19.50
including watering, ramming, compacting etc.
complete.(By machinery)
Providing and fixing in position 110 mm dia PVC
pipe weep holes in abutment, wing wall, and laying
training etc. complete
Providing & fixing in position sign board of standard
size of 1.20mx0.90m with M.S angle 40mm x
40mm x 6mm with 3mm thick iron plate including 2.00 Nos 3011.30
fixing in 1:5:10 prop. Concrete block size
40cmx40cmx75 cm including painting existing data
on the board etc. complete as directed.
Supplying of graded stone aggregates of following
size (for W.B.M. road ) H.B. stone aggregates. (i)
Spreading the stone aggregate for Roiling and
W.B.M. including filling the interstices to required 34.00 CM 268.92
camber & gradient (excluding spreading of
Blindage) (ii) 40 mm to 63 mm size aggregates.
Providing videography on the occasion of function
or for ongoing construction work including dubbing 1230.51
,titling etc. complete including cost of cassate
/CD.(b) Up to 4.0 hours
Construction of Granular sub-base 150 mm thick
by providing coarse graded machine crushed B.T.
material satisfying MOST specification of grading I
(B.T. stone aggregate 53 mm to 26.5 mm 35%,26.5
to 4.75 mm-45% and 2.36 mm below-20%) CM 1217.05
including spreading in uniform layer with motor
grader on prepared surface, mixing by mix in place
method with rotavator at OMC and compacting with
vibratory roller to achieve the desired density etc.
Type - A, "W" : Metal Beam Crash Barrier
(Providing and erecting a "W" metal beam crash
barrier comprising of 3 mm thick corrugated sheet
metal beam rail, 70 cm above road/ground level,
fixed on ISMC series channel vertical post, 150 x
75 x 5 mm spaced 2 m center to center, 1.8 m high,
1.1 m below ground/road level, all steel parts and
fitments to be galvanized by hot dip process, all
fittings to conform to IS:1367 and IS:1364, metal
beam rail to be fixed on the vertical post with a
spacer of channel section 150 x 75 x 5 mm,
mm long complete as per clause 811)
Finishing wall with weather proof exterior emulsion
paint on wall surface (two coats) to give an required
shape even shade after thoroughly brushing the
surface to remove all dirt, and remains of loose
powdered materials. etc complete
Care and diversion of Canal including required
dewatering during construction of CD works and
allied works as prescribed and directed etc.
complete. (Including credit of usable NP pipe after
completing of work)
Rupees Two Crore Twenty-Two Lakh Eighty-Eight Thousand Seven Hundred Ninety-One Rupees and
Seventeen Paise Only
I/We am/are willing to carry out the work at… ...................... % above/below percent (Should
be written in figures and words) of the estimated rate mentioned above. Amount of my /our
tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
In words In words
Note:-GST as per prevailing rate shall be paid Extra.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
SBD 115 and 131 RD.pdf
BOQ 115 and 131 RD.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .